Search Results (1,087)

Flexible resistive sensors are promising for wearable and ergonomic applications because they can be easily fabricated on textiles or flexible substrates and enable real-time monitoring of human movement and posture, especially in health monitoring systems. This review presents an overview of recent developments in an interdisciplinary way and summarises advances in materials, fabrication methods, and ergonomic applications. A structured literature search was conducted across major databases, including only studies focused on resistive sensing. The selected works were analysed in terms of conductive materials, fabrication techniques (e.g., direct ink writing (DIW) and textile-based methods), and their integration into wearable systems. Flexible resistive sensors are widely used for monitoring joint motion, posture, and physiological signals in healthcare and industrial environments. However, several challenges remain, including limitations in sensitivity, signal stability, material durability, and the need for reliable calibration in real-world conditions. This review highlights current progress and existing limitations and outlines future research directions toward more robust and user-friendly wearable sensing solutions for ergonomic applications. Full article

This study investigates the frequency-dependent electrical conductivity of electrically conductive threads (also known as e-threads), particularly focusing on their inherently lower conductivity than traditional conductors like copper. While efforts have been made to electrically characterize conductive threads in the past, most studies have focused on DC or frequencies lower than 1 GHz. Recent works have evaluated attenuation up to 6 GHz, but they do not report bulk conductivity and lack validation in the context of antenna applications. In a major step forward, this study reports a systematic way of characterizing the surface conductivity of conductive yarns, for eight different thread types, from 10 MHz to 6 GHz. Different parameters such as insertion loss, attenuation, and conductivity are reported, determining the suitability of conductive yarns at specific frequencies. The study also reports the first frequency-dependent bulk conductivity of individual conductive threads. By measuring both surface and bulk conductivity, our work provides foundational data crucial for designing textile-based antennas and sensors. The practical relevance of the proposed approach is demonstrated through simulations and measurements of a broadband log-spiral antenna and a single-turn loop antenna. Overall, this research contributes valuable insights into the integration of e-textiles in smart fabric applications, paving the way for further innovations in this evolving field. Full article

This study examines the accounting determinants of the capital structure of Portuguese firms in the textile, clothing, and leather sectors, based on a sample of 6469 firms over the period 2010–2022, using panel data models. The relevance of this study lies in its focus on specific industrial sectors characterized by a high predominance of small and medium-sized enterprises (SMEs) and a strong dependence on bank financing. In addition to the traditional analysis of leverage determinants, this study introduces a conditional approach to accounting variables based on firms’ structural characteristics, namely size and age. Robustness checks and data treatment procedures were conducted to mitigate the potential impact of outliers in the financial variables. The results show that profitability, liquidity, and risk negatively affect indebtedness, whereas asset structure and growth exert positive effects. The effective tax rate has a negative impact on debt. Firm size and age significantly condition the relationship between variables. SMEs’ financing decisions exhibit differentiated patterns depending on firm size and age. The findings support the predictions of the Pecking Order Theory and, to a lesser extent, the Trade-Off Theory. The study highlights the importance of considering firm heterogeneity when designing financing policies and strategies for Portuguese SMEs. Full article

Construction industry remains a major driver of global resource use and waste generation, therefore, identifying sustainable material alternatives is increasingly important. Recycled-textile-based insulation presents a promising pathway to support circular economy principles by diverting post-consumer waste from landfills and reducing reliance on virgin petrochemical materials. This study conducts a cradle-to-gate life cycle assessment (LCA) using SimaPro to compare polyurethane (PU) foam and recycled denim (cotton fiber) insulation. The system boundary includes raw material extraction, transportation, and manufacturing. A functional unit of 1 m² of installed insulation with a thermal resistance of RSI = 1 m²·K/W at the factory gate ensures comparability, with mass-based results reported as secondary metrics. The results indicate that recycled denim exhibits higher embodied carbon per unit mass, despite lower production energy and lower cradle-to-gate impacts per installed area, reinforcing the need for a declared-unit-based comparison tied to thermal performance. Air leakage is evaluated separately as a complementary performance indicator influencing in-service energy behavior showing significantly lower air leakage for PU; but is not included in the cradle-to-gate normalization. However, it could be argued that materials with improved airtightness may enable the use of reduced insulation thickness while still achieving equivalent performance, thereby potentially lowering overall material demand. Nevertheless, recycled denim offers environmental advantages by reducing landfill waste and promoting resource conservation through material reuse. A transient coupled heat–moisture model in COMSOL Multiphysics, using climate data from Arizona and Florida, further reveals that denim absorbs more moisture than polyurethane. This leads to larger heat flux fluctuations, highlighting a trade-off between denim’s sustainability advantages and its reduced hygrothermal durability. Overall, these findings demonstrate the limitations of single-metric comparisons and emphasize the need for performance-based, multi-criteria assessments that integrate functional efficiency with circularity. Future research should incorporate occupant health and comfort to enable a more comprehensive evaluation of insulation sustainability. Full article

In the pursuit of sustainable and flexible electronics, polymer-based conductive films offer a promising solution due to their biodegradability, mechanical flexibility, and cost-effective fabrication. This study presents the development of a highly conductive and flexible nanocomposite material based on polyaniline-grafted chitosan (PANI-g-Chs) and Vinavil (Vi, a vinyl glue specifically designed for enhancing the sealability of textiles and paper), serving as a matrix for applications in flexible electronics. The PANI-g-Chs nanocomposite was synthesized via in situ oxidative polymerization, where chitosan nanoparticles (Chs) served as a stabilizing template to prevent PANI aggregation, reducing the particle size from 1700 nm (pristine PANI) to 180 nm (PANI-g-Chs). The resulting composite exhibited exceptional electrical conductivity (77.79 S/m at 25 wt% PANI-g-Chs). Hall effect measurements showed that the carrier mobility increased up to 1162.7 cm²/V·s and the carrier density rose to 6.5.1017 cm⁻³, confirming efficient charge transport and network formation. Mechanical analysis revealed a 300% increase in the storage modulus for PANI-g-Chs, and thermal studies confirmed stability up to 300 °C. Optical characterization showed a reduced bandgap (3.6 eV) and extended π-conjugation, which are critical for optoelectronic applications. Application tests demonstrated stable conductivity under mechanical deformation, highlighting the material’s potential for use in flexible electronics, sensors, and sustainable conductive coatings. This work offers a viable alternative to conventional conductive polymers. Full article

This study presents a systematic evaluation of 2-layer conductive Jacquard knitted fabrics with a birdseye backing designed for wearable electronic applications. Three sets of samples with 9 different proportions of conductive yarn (27 samples) are designed on a computerized flat-knitting machine, and three indicators (conductive yarn usage ratio, resistance change ratio after washing, and temperature variation) are examined. The 2-layer Jacquard structure enables conductive yarns to form loops on both the technical face and back, thus producing continuous and interlocked conductive pathways. The experimental results show that the proportions of pattern dots for the conductive yarns determine the amount of conductive yarn used in a 2-layer Jacquard structure with the same technical parameters. For the samples with 10–90% pattern dots, the conductive yarn consumption ratio ranges from 34.80% to 65.18%. After 10 washes, resistance change ratio ranges from 27.66~55.54%, which show a moderate electrical stability. After 10 washes, the heating temperature increases by 15.6 to 19.67 °C, which show good thermal properties. Finally, a fuzzy logic evaluation is conducted with objective indicator weights. The findings provide quantitative evidence for the material–structure integration of conductive knitted textiles and support their potential for applications in next-to-skin smart garments. Full article

Hydrothermal carbonization (HTC) of agricultural waste is a promising waste management technique. However, the use of different raw materials may produce hydrochars with varying efficiencies, both in yield and application, and environmental impacts, due to differences in composition and required processing conditions. To understand the influence of biomass type and acid-assisted HTC conditions, this study used sugarcane and agave bagasse to produce functionalized hydrochars and evaluated them for the removal of Reactive Orange 84; an azo dye used in the textile industry. Material characterization was performed using FT-IR, TGA, BET, and XRD analyses. In addition, a life cycle assessment was conducted to evaluate environmental impacts associated with hydrochars produced using H₂SO₄ at concentrations of 0.2 and 0.5 M. TGA and XRD results indicate that agave bagasse hydrochars (HBA) retain more crystalline lignocellulosic structures, whereas sugarcane bagasse hydrochars (HBS) exhibit predominantly amorphous structures after HTC. FT-IR analysis confirmed the presence of –SO₃H functional groups; however, HBA samples showed greater availability of these groups with increasing acid concentration. Adsorption experiments and LCA results demonstrated that the most favorable treatment, in terms of emission reduction and dye removal, was agave bagasse functionalized with 0.5 M H₂SO₄, achieving 75.7% mass yield and 94.5% dye removal. Full article

The study of river basins is key to understanding the dynamics of microplastic (MPs) generation, transport, and accumulation in regions where various productive activities converge and waste management is limited. The objective of this study was to characterize economic activities in the Tecolutla River basin, Mexico, to identify risk factors associated with MPs generation and release throughout the production chain. A descriptive applied research study was conducted using a structured questionnaire administered to 19 economic units distributed across seven municipalities in the Tecolutla River basin, Veracruz, Mexico. The instrument allowed for the evaluation of the use of plastic materials in inputs, production processes, final products, and waste management practices. Among the economic units analyzed (n = 19), 94.7% reported the use of polymeric materials, with a predominance of thermoplastics such as polyethylene terephthalate (PET), polyvinyl chloride (PVC), and polypropylene (PP), which have a high potential for secondary fragmentation. Within the tertiary sector, accommodation and food preparation services account for the highest proportion of units with limited separation and recycling practices. Activities in the secondary sector, especially the textile and construction industries, showed a high potential for releasing this pollutant due to the use of synthetic fibers, composite materials, and the absence of retention systems. The results provide a basis for the design of mitigation strategies targeting priority productive sectors at the watershed scale. Full article

Waste from the wind power and textile industries poses major environmental challenges. While the textile industry is a significant global contributor to waste, producing around 92 million tons of waste annually, and greenhouse gas emissions, wind power, although one of the cleanest energy sources during operation, still generates waste and associated CO₂ emissions, particularly associated with the end-of-life decommissioning of turbine blades. This waste can be reused, combined with bio-based binders, to reduce the construction sector’s long-term environmental impact. The present work identifies research trends and gaps in the use of these waste materials, either individually or combined, for the development of thermal and acoustic insulation solutions for the construction sector, by means of a combined bibliometric and content analysis of Scopus and Web of Science documents from 2014 to 2025. The study focuses on bibliometric indicators and reports on physical properties (thermal conductivity, density, mechanical strength, and acoustic performance) of the resulting composites, including those produced with bio-binders. Additionally, a qualitative review of life cycle assessment studies indicates that bio-based and waste-derived insulation materials can significantly reduce environmental impacts compared with conventional mineral or petrochemical insulators. Results reveal growing scientific interest in this subject, highlighting an annual publication growth of 5.09%. They emphasize the performance of natural textile fibers in thermal and acoustic insulation, the mechanical capacity of synthetic fibers, and the semi-structural potential of fiberglass composites. Meanwhile, bio-binders improve the upcycling of textile waste; however, they reveal a significant research gap in the integration of wind turbine blade waste into insulation composites. No indexed studies were found that simultaneously combine textile waste, blade-derived fibers, and bio-based binders in a single insulation system, despite projected cumulative blade waste of 43 million tons by 2050. These findings advocate hybrid innovations and standardized assessments to drive circular economy and low-carbon building solutions. Full article

This study investigates the sustainability of competitiveness in the textile and apparel industry across Asia following the 2005 conclusion of the Agreement on Textiles and Apparel (ATC). It aims to evaluate how sectoral competitiveness is understood and maintained beyond cost savings alone. A systematic review of the literature was conducted using PRISMA 2020 guidelines, analyzing 48 peer-reviewed journal articles from reputable sources published between 2001 and 2024. The selection process involved multiple stages of screening and thematic categorization, focusing on individual country case studies, competitiveness measures, indicators, analytical frameworks, and methodological approaches. A Risk of Bias assessment was conducted using the Mixed Methods Appraisal Tool (MMAT) to evaluate the methodological quality of the included studies. The findings highlight seven strategic pillars for sustaining competitiveness in the textile and apparel industry: shifting toward higher value-added manufacturing; integration into Global Value Chains (GVCs); technological innovation; adaptability; supply chain collaboration and organizational networks; responsible manufacturing; and government support. Moreover, the review includes a Co-occurrence analysis of all seven pillars. The analysis shows that supply chain collaboration and organizational networks serve as central pillars, often combined with adaptability and technological innovation. These findings demonstrate that maintaining industrial competitiveness in the textile and apparel industry no longer depends solely on cost efficiency but increasingly relies on strategic capabilities, ecosystem collaboration, and institutional support. The study offers a comprehensive framework to enhance the long-term competitiveness of textile manufacturing, particularly in Asia, contributing to the broader literature on transforming industries to stay competitive. Full article

Compression textiles have been widely applied in medical, sportswear, and daily usage, with single-jersey structures produced by circular knitting dominating the market due to their thinness and light weight. However, the presence of seams may compromise compression performance and wearer comfort. This study investigates the effects of yarn type, number of yarns, and loop length on pressure, stretchability, and thermal comfort of seamless punch-lace knitted fabrics and explores their potential application in compression textiles. The results show that yarn number is the dominant factor influencing fabric stiffness, stretchability, and pressure. Fabrics with increased yarn content demonstrate higher maximum load and compression pressure. Smaller loop lengths and additional reinforcing yarns improve dimensional stability and resistance to extension. Air permeability decreases with increasing yarn number due to increased fabric thickness and reduced porosity, while thermal conductivity increases and is positively associated with ventilation resistance, indicating a trade-off between heat transfer and breathability. Surface friction and roughness are significantly affected by yarn number, yarn type, and loop length, whereas water vapour permeability shows no significant relationship with the investigated variables. Overall, seamless punch-lace knitted fabrics demonstrate strong potential for compression applications, although careful design is required to balance breathability and thermal comfort. Full article

This study investigates the dynamic artifacts (DAs) in knitted resistive strain sensors (KRSS) subjected to various deformation types, including stair-wise, trapezoidal, and triangle-type deformations. The presence of DAs, characterized by sharp peak-wise increases in resistance followed by a gradual decline, was observed across all KRSS samples. The amplitude of DA peaks increased with higher deformation velocities within the investigated range of 2.6–40 cm/s. The study also identified the temporal offset between resistance and deformation during linear deformation, suggesting a complex mechanism underlying DAs. The results demonstrate that DAs are most prominent in stepwise and trapezoidal deformations, while continuous deformations like triangle-type loading partially mask these artifacts. The resistance signals were recorded at a sampling rate of 150 Hz, with temporal desynchronization between recorded parameters not exceeding 6.7 ms, enabling the observation of dynamic effects. Manifestation of DAs in KRSS degrades the metrological characteristics of KRSS and cannot be ignored. This paper provides insights into the relationship between KRSS structure, deformation velocity, and DA behavior, and provides an experimental basis for future compensation approaches to mitigate the impact of DAs on measurement accuracy. Full article

This paper presents a qualitative sustainability assessment of an innovative, water-based, partially bio-based, and potentially removable screen-printing ink designed to replace conventional PVC-based inks in the textile industry. The assessment is conducted in alignment with the European Commission’s tiered Safe and Sustainable by Design (SSbD) framework, applying a simplified screening approach suitable for innovations with limited sustainability data availability. The evaluation is conducted using the LCBROM (Life Cycle Based Risk and Opportunity Mapping) methodology, which is a structured approach designed to identify potential environmental, economic, and social drawbacks and benefits throughout the product’s life cycle, from production and use to end of life. The screening incorporates the MET+Ec+S matrix (Material, Energy, Toxicity, and Economic and Social dimensions), providing a comprehensive overview of the sustainability performance of the removable PVC-free ink at each stage of its life cycle. The novel removable PVC-free ink formulation incorporates bio-based pigments, thickeners, and plasticisers, and is designed to facilitate recyclability and reuse in textile applications. Compared to traditional plastisol inks, the screening indicates potential reductions in toxicity and environmental persistence compared to PVC-based plastisol inks, subject to validation in future quantitative studies. However, key trade-offs include reliance on fossil-based ingredients (as bio-based alternatives are still being developed), increased material costs, and durability concerns. Despite these issues, the removable PVC-free ink’s compatibility with existing printing infrastructure and alignment with emerging EU sustainability regulations indicate its potential relevance for circular textile production, subject to validation through quantitative life-cycle assessment and pilot-scale implementation. The results do not constitute a quantitative life cycle assessment but instead provide a structured qualitative basis for guiding further development, data collection, and future LCA modeling. By explicitly positioning the work within a simplified SSbD tier, this study demonstrates how early-stage screening can support innovation design while transparently addressing uncertainty and trade-offs. Full article

Textile materials represent a versatile class of engineering substrates widely used in apparel, domestic products, and medical protective systems. Despite their extensive application, large-scale textile production has seen limited integration of fundamentally new functionalization strategies. In recent years, however, advances in materials science have enabled the development of textiles with tailored electrical, adaptive, and biological functionalities. This review summarizes recent progress in the functionalization of textile materials with a focus on approaches relevant to engineering and industrial implementation. Particular attention is given to conductive textiles designed for operation under extreme environmental conditions, including low-temperature climates. Methods for integrating electrically conductive elements into fibrous structures are discussed, highlighting their potential for sensing, thermal regulation, and energy-related applications such as powering portable electronic devices. Inkjet printing is presented as a scalable technique for high-resolution deposition of conductive patterns while preserving the mechanical integrity and aesthetic properties of textile substrates. In addition, adaptive and stimuli-responsive textile systems are reviewed, including materials capable of responding to thermal, optical, or chemical stimuli, with applications in camouflage, wearable systems, and multifunctional surfaces. The review further addresses the development of bioactive textiles, emphasizing antibacterial functionalization using organic and inorganic agents to mitigate the spread of pathogenic microorganisms. The relevance of such materials has been underscored by recent global viral outbreaks. Overall, this work aims to provide a materials science perspective on emerging textile functionalization strategies and to facilitate the transition of these technologies from laboratory-scale research to practical engineering applications. Full article

Nowadays, synthetic textiles, widely used on the market and largely composed of polyester (polyethylene terephthalate, PET), release microplastic fiber fragments (MPFFs) into the environment, inducing repercussions on ecosystems and health. Reducing these emissions by understanding manufacturing’s influence on MPFF release represents an important challenge for sustainable textile manufacturing and eco-design. This study aims to identify key weaving process factors influencing MPFF release during the first wash, which ends up in wastewater. Employing a Taguchi design of experiments, 18 fabrics were produced on industrial machines from polyester filaments, with different warp and weft densities, weaving patterns, and production speeds. Following identical black dyeing and finishing treatments, the range of the average quantity of MPFF released per fabric varies from 221 mg/kg to 753 mg/kg with an overall mean value of 451 mg/kg across all trials. Among the investigated parameters, warp yarn density and weaving pattern emerged as the most influential factors, accounting for the largest variations in MPFF release. Increasing warp density from 40 to 60 yarns/cm resulted in a substantial increase in MPFF emission, while the 3/1 sateen weave exhibited significantly lower MPFF release compared to plain and ottoman weaves. In contrast, weft density and weft insertion speed showed limited influence relative to experimental variability. No clear correlation was observed between the number of filaments in the weft yarn and MPFF release. These results show that the higher the surface mass, the cover factor, and the drape coefficient, the higher the release of MPFFs. This study shows that it is possible to limit the amount of microfibers generated by textiles by controlling the design and production of fabrics. The results support the integration of microplastic mitigation criteria into sustainable textile engineering and industrial eco-design frameworks. Nevertheless, the complexity of the release mechanisms and potential interactions between factors highlights the importance of conducting further research to determine the specific fabric characteristics that influence MPFF release. Full article