Search Results (490)

This study investigates a novel heat pipe integrated cooling system designed for thermal management of Tesla’s 4680 cylindrical lithium–ion batteries in electric vehicles (EVs). Through a comprehensive approach combining experimental analysis, 1-D AMESim simulations, and 3-D Computational Fluid Dynamics (CFD) modeling, the thermal performance of various wick structures and working fluid filling ratios was evaluated. The experimental setup utilized a triangular prism chamber housing three surrogate heater blocks to replicate the heat generation of 4680 cells under 1C, 2C, and 3C discharge rates. Results demonstrated that a blended fabric wick with a crown-shaped design (Wick 5) at a 30–40% filling ratio achieved the lowest maximum temperature (T_max of 47.0°C), minimal surface temperature deviation (ΔT_surface of 2.8°C), and optimal thermal resistance (R_th of 0.27°C/W) under 85 W heat input. CFD simulations validated experimental findings, confirming stable evaporation–condensation circulation at a 40% filling ratio, while identifying thermal limits at high heat loads (155 W). The proposed hybrid battery thermal management system (BTMS) offers significant potential for enhancing the performance and safety of high-energy density EV batteries. This research provides a foundation for optimizing thermal management in next-generation electric vehicles. Full article

Background/Objectives. Efficient nucleic acid delivery into target cells remains a critical challenge in gene therapy. Due to its advantages in biocompatibility and safety, recent research has increasingly focused on non-viral gene delivery. Methods. A series of copolymers—synthesized by integrating thermally sensitive poly(N-isopropylacrylamide) (PNIPAm), hydrophilic poly(ethylene glycol) (PEG) grafts, and a polycationic poly(L-lysine) (PLL) block of varying lengths ((PNIPAm)₇₇-graft-(PEG)₉-block-(PLL)_z, z = 10–65)—were investigated. Plasmid DNA complexation with the copolymers was achieved through temperature-modulated methods. The resulting polyplexes were characterized by evaluating complex strength, particle size, zeta potential, plasmid DNA loading capacity, resistance to anionic stress, stability in serum, and lysosomal membrane destabilization assay. The copolymers’ potential for plasmid DNA delivery was assessed through cytotoxicity and transfection studies in cancer cell lines. Results. Across all complexation methods, the copolymers effectively condensed plasmid DNA into stable polyplexes. Particle sizes (60–90 nm) ranged with no apparent correlation to copolymer type, complexation method, or N/P ratio, whereas zeta potentials (+10–+20 mV) and resistance to polyanionic stress were dependent on the PLL length and N/P ratio. Cytotoxicity analysis revealed a direct correlation between PLL chain length and cell viability, with all copolymers demonstrating minimal cytotoxicity at concentrations required for efficient transfection. PNL-20 ((PNIPAm)₇₇-graft-(PEG)₉-block-(PLL)₂₀) exhibited the highest transfection efficiency among the tested formulations while maintaining low cytotoxicity. Conclusions. The study highlights the promising potential of (PNIPAm)₇₇-graft-(PEG)₉-block-(PLL)_z copolymers for effective plasmid DNA delivery to cancer cells. It reveals the importance of attaining the right balance between polyplex tightness and plasmid release to achieve improved biocompatibility and transfection efficiency. Full article

Background/Objectives: The consumption of refined carbohydrates has increased globally. It is associated with inflammation and oxidative stress, both recognized as risk factors for cardiovascular disease. This study investigated the effects of a refined carbohydrate-rich diet on the vascular reactivity of rat aorta. Methods: We acclimatized adult male Wistar rats for two weeks and then randomly assigned them to two experimental groups: a control (CT) group and a high-carbohydrate diet (HCD) group. The CT group received standard laboratory chow for 15 days, while the HCD group received a diet composed of 45% sweetened condensed milk, 10% refined sugar, and 45% standard chow. After the dietary exposure period, we evaluated the vascular reactivity of aortic rings, gene expression related to inflammation, superoxide dismutase activity, and biochemical parameters, including cholesterol, triglycerides, fasting glucose, and glucose and insulin tolerance. Results: The results demonstrate a reduction in vascular reactivity caused by endothelial alterations, including increased NO production, which was observed as higher vasoconstriction in the presence of L-NAME and aminoguanidine and upregulation of iNOS gene expression. In addition, increased production of free radicals, such as O₂^-, was observed, as well as immune markers like MCP-1 and CD86 in the HCD group. Additionally, the HCD group showed an increase in the TyG index, suggesting early metabolic impairment. GTT and ITT results revealed higher glycemic levels, indicating early signs of insulin resistance. Conclusions: These findings indicate that short-term consumption of a refined carbohydrate-rich diet may trigger oxidative stress and endothelial dysfunction, thereby increasing the risk of cardiovascular complications. Full article

The limited oxidation resistance of MoSi₂ between 400 °C and 600 °C restricts its aerospace applications. This study develops a silica-sol derived core-shell MoSi₂@SiO₂ composite to enhance the low-temperature oxidation resistance of MoSi₂. Acidic, neutral, and basic silica sols were systematically applied to coat MoSi₂ powders through sol-adsorption encapsulation. Two pathways were used, one was ethanol-mediated dispersion, and the other was direct dispersion of MoSi₂ particles in silica sol. Analysis demonstrated that ethanol-mediated dispersion significantly influenced the coating efficiency and oxidation resistance, exhibited significantly decreased coating weight gains (maximum 27%) and increased oxidation weight gains (10–20%) between 340 °C and 600 °C compared with direct dispersion of MoSi₂ particles with silica sol, ascribe to the kinetic inhibition of hydroxyl group condensation and steric hindrance of MoSi₂-silica sol interface interactions of ethanol. Systematic investigation of silica sol encapsulation of MoSi₂ revealed critical correlations between colloid properties and oxidation resistance of MoSi₂@SiO₂. Basic silica sol coated MoSi₂ (BS-MoSi₂) exhibits the lowest coating efficiency (coating weight gain of 7.74 ± 0.06%) as well as lowest oxidation weight gain (18.45%) between 340 °C and 600 °C compared with those of acid and neutral silica sol coated MoSi₂ (AS-MoSi₂ and NS-MoSi₂), arises from optimal gelation kinetics, enhanced surface coverage via reduced agglomeration, and suppressed premature nucleation through controlled charge interactions under alkaline conditions. Full article

Despite the availability of various materials for chimney applications, ongoing research seeks alternatives with improved thermal and chemical resistance. Geopolymers are a promising solution, exhibiting exceptional resistance to high temperatures, fire, and aggressive chemicals. This study investigates fly ash-based lightweight geopolymer concretes that incorporate expanded clay aggregate (E.C.A.), perlite (P), and foamed geopolymer aggregate (F.G.A.). The composites were designed to ensure a density below 1200 kg/m³, reducing overall weight while maintaining necessary performance. Aggregate content ranged from 60 to 75 wt.%. Physical (density, thickness, water absorption), mechanical (flexural and compressive strength), and thermal (conductivity, resistance) properties were evaluated. F.G.A. 60 achieved a 76.8% reduction in thermal conductivity (0.1708 vs. 0.7366 W/(m·K)) and a 140.4% increase in thermal resistance (0.1642 vs. 0.0683). The F.G.A./E.C.A./P 60 mixture showed the highest compressive strength (18.069 MPa), reaching 52.7% of the reference concrete’s strength, with a 32.3% lower density (1173.3 vs. 1735.0 kg/m³). Water absorption ranged from 4.9% (REF.) to 7.3% (F.G.A. 60). All samples, except F.G.A. 70 and F.G.A. 75, endured heating up to 800 °C. The F.G.A./E.C.A./P 60 composite demonstrated well-balanced performance: low thermal conductivity (0.2052 W/(m·K)), thermal resistance up to 1000 °C, flexural strength of 4.386 MPa, and compressive strength of 18.069 MPa. The results confirm that well-designed geopolymer lightweight concretes are suitable for chimney and flue pipe linings operating between 500 and 1000 °C and exposed to acidic condensates and aggressive chemicals. This study marks the initial phase of a broader project on geopolymer-based prefabricated chimney systems. Full article

Phase-separated membraneless biomolecular condensates in the cytoplasm and nucleus are now recognized to play a major role in modulating diverse functions in mammalian cells, and contribute to cancer pathogenesis through dysregulated function of condensates of transcription factors such as STAT3 and fusion oncoproteins. Oral cancer, the sixth most prevalent malignancy worldwide, in the absence of overt causes such as tobacco or alcohol, most frequently occurs in a U-shaped zone (floor of mouth, side of tongue, anterior fauces and retromolar region) reflecting the path of liquid transit through the mouth. The cellular basis for this “high-risk” zone and the biochemical mechanisms used by oral cells to combat repetitive tonicity and temperature stresses are incompletely understood. We had previously observed that at 37 °C, in OECM1 oral carcinoma cells, cytoplasmic condensates of antiviral human GFP-MxA GTPase disassembled within 1–2 min of exposure of cells to saliva-like one-third hypotonicity, and underwent “spontaneous” reassembly in the next 5–7 min. Moreover, hypotonic beverages (water, tea, coffee), investigated at 37 °C, triggered this condensate cycling. In the present studies we investigated whether this process was temperature sensitive, representative of cold vs. warm drinks. We observed a slowing of this cycle at 5 °C, and speeding up at 50 °C. The involvement in this disassembly/reassembly process of WNK-SPAK/OSR1 serine-threonine kinase pathway, best studied for regulation of water and Na, K and Cl influx and efflux in kidney tubule cells, was evaluated by us in oral cells using pathway inhibitors WNK463, WNK-IN-11 and closantel. The pan-WNK inhibitor WNK463 inhibited hypotonicity-driven condensate disassembly, while the SPAK/OSR1 inhibitor closantel markedly slowed reassembly. Unexpectedly, the WNK1-selective inhibitor (WNK-IN-11), triggered a dramatic and rapid (within 1 h) spheroid to fibril transition of GFP-MxA condensates in live cells, but without affecting MxA antiviral function. The new data suggest a novel hypothesis for the anatomic localization of oral cancer in the U-shaped “high-risk” zone in the mouth: dysfunction of biomolecular condensates in oral cells along the beverage transit pathway through the mouth due to repetitive tonicity and temperature stresses that might underlie a prooncogenic progression. Full article

This study explores how production technology influences spray-applied rigid polyurethane (PUR) foam insulation’s cryogenic performance. In cryogenic applications such as liquid gas storage, insulation must minimise heat transfer and resist moisture ingress under severe thermal gradients. Experimental aluminium vessels were insulated with PUR foam of varying thicknesses and surface conditions—rough, machined smooth, and with a urea-based protective coating—and then tested using dynamic boil-off of liquid nitrogen (LN₂). Foam properties, including adhesion, mechanical strength, thermal expansion, thermal conductivity, and closed-cell content, were evaluated. The results revealed that thicker insulation reduced both effective thermal conductivity and moisture uptake. Although the urea-coated vessel showed minimal water absorption, the coating increased overall thermal conductivity due to its heat conduction and condensation behaviour. Moisture was primarily absorbed near the foam surface, and no cumulative effects were observed during repeated tests. The effective thermal conductivity was determined by interpolating boil-off data, confirming that insulation performance strongly depends on thickness, surface condition, and environmental humidity. These findings provide valuable guidance for the design and application of PUR foam insulation in cryogenic environments. Full article

The continued effective control of retroviral infections will no doubt require the development of new clinical interventions targeting underexploited areas of retroviral biology such as genome selection and virion assembly. In our previous work, we demonstrated that both the Gag-psi (Ψ) interaction and genomic RNA (gRNA) dimerization each uniquely contribute to the formation, morphology, and stability of Rous sarcoma virus (RSV) Gag-viral RNA (vRNA) biomolecular condensates (BMCs). The present work builds upon those observations, utilizing atomic force microscopy (AFM) and fluorescence correlation spectroscopy (FCS) to elucidate the nanoscale morphology, resistance to mechanical deformation, and constituent diffusivity of RSV Gag-vRNA BMCs. These approaches revealed a novel role for gRNA dimerization in nanoscale condensate architecture and mechanical stability that aids in our understanding of why gRNA dimerization is critical for efficient packaging of the retroviral genome. Further biophysical characterization of RSV Gag-gRNA BMCs therefore possesses great potential to reveal novel avenues for therapeutic intervention. Full article

Poplar is a vital ecological and economic tree species. In recent years, poplar plantations in China have been increasingly threatened by the fall webworm (Hyphantria cunea). Developing resistant varieties through genetic engineering is an environmentally friendly and cost-effective approach to controlling this pest. Although some exogenous toxic genes have been used in insect-resistant poplar breeding, endogenous defense genes remain scarce. This study focused on tannins, key defensive metabolites in poplar, and explored the role of PagLAR3, a gene encoding a crucial enzyme in condensed tannin biosynthesis, in poplar’s defense against the fall webworm. The findings revealed that overexpression of PagLAR3 significantly increased levels of catechin, gallocatechin, procyanidin B3, and procyanidin C2 in poplar leaves. Feeding assays with fall webworm larvae demonstrated that, compared with an 84 K (P. alba × P. glandulosa) control, transgenic lines overexpressing PagLAR3 significantly reduced larval and pupal weight, prolonged larval duration, and caused a decrease in adult emergence. Development retardation caused by overexpression of PagLAR3 in fall webworm is expected to effectively control the pest population, thereby mitigating damage to poplar trees. PagLAR3 represents a potential target for enhancing poplar resistance to the fall webworm. Full article

Flavonoids and chalcones, widely recognised for their diverse biological activities, have garnered attention due to their potential therapeutic applications. This review discusses fluorinated flavonoids and chalcones, focusing on their prospective anti-inflammatory, antidiabetic, anticancer, antiosteoporotic, cardioprotective, neuroprotective, hepatoprotective, antimicrobial, and antiparasitic applications. The enhanced biological activities of fluorinated derivatives, particularly the antibacterial, antiviral, and anticancer properties, are attributed to the introduction of fluorine groups, which increase lipophilicity and metabolic stability. Key findings indicate that fluorinated flavonoids and chalcones exhibit synergistic effects with antibiotics, inhibit bacterial efflux pumps, and reveal potent antiviral and anticancer properties. However, challenges such as cytotoxicity and structural optimisation have to be addressed. The synthesis of fluorinated flavonoids and chalcones is discussed, with emphasis on various synthetic methods such as condensation and cyclisation reactions starting from fluorinated precursors, as well as fluorination strategies, including the use of molecular fluorine or fluorinating agents. Fluorinated flavonoids and chalcones represent candidates for therapeutic development and have the potential to overcome drug resistance. However, further studies are necessary to adjust their pharmacological profiles. Full article

Manganese oxides (manganites) are among the most studied materials in condensed matter physics due to the famous colossal magnetoresistance and very rich phase diagrams characterized by strong competition between ferromagnetic (FM) metallic and antiferromagnetic (AFM) insulating phases. One of the key questions that remains open even after more than thirty years of intensive research is the exact conductivity mechanism in insulating as well as in metallic phases and its relation to the corresponding magnetic structure. In order to shed more light on this problem, here, we report magnetotransport measurements on sintered nanocrystalline samples of the very poorly explored manganites ${\mathrm{Ca}}_{1-x}{\mathrm{Gd}}_x{\mathrm{MnO}}_3$ with $x=0.05$ and $x=0.10$, in the temperature range 2–300 K, and in magnetic fields up to 16 T. Our results indicate that both compounds at low temperatures exhibit metallic behavior with a peculiar resistivity upturn and a large negative magnetoresistance. We argue that such behavior is consistent with a Kondo-like scattering on Gd impurities coupled with the percolation of FM metallic regions within insulating AFM matrix. Full article

This study investigates the influence of geometric parameters of internally threaded tubes on heat transfer and resistance characteristics. Experimental analyses were conducted on pressure drop for 9.52 mm outer diameter tubes with various industry-standard geometric parameter combinations. Using R410A as the working fluid under turbulent flow conditions (Re = 20,000–60,000), experimental parameters included the following: mass velocity 50–600 kg/(m²·s), condensation temperature 45 ± 0.2 °C, and geometric ranges of thread height (e = 0.0001–0.0003 m), helix angle (α = 17–46°), crest angle (β = 16–53°), and number of ribs (Ns = 50–70). Results demonstrate that the newly developed correlation based on Webb and Ravigururajan friction factor models shows improved prediction accuracy for R410A condensation pressure drop in ribbed tubes. Model II achieved a mean absolute percentage error (MAPE) of 7.08%, with maximum and minimum errors of 27.66% and 0.76%, respectively. The standard deviation decreased from 0.0619 (Webb-based Model I) to 0.0362. Integration of SVR machine learning further enhanced tube selection efficiency through optimized correlation predictions. Full article

Heat pipes are highly efficient heat transfer devices relying on phase-change mechanisms, with performance heavily influenced by working fluids and operational dynamics. This review article comprehensively examines hydrodynamics and heat transfer in heat pipes, contrasting conventional working fluids with nanofluid-enhanced systems. In the present work we discuss mathematical models governing fluid flow and heat transfer, emphasizing continuum and porous media approaches for wick structures. Functional dependencies of thermophysical properties (e.g., viscosity, surface tension, thermal conductivity) are reviewed, highlighting temperature-driven correlations and nanofluid modifications. Transport mechanisms within wicks are analyzed, addressing capillary-driven flow, permeability, and challenges posed by nanoparticle integration. Fourth, interfacial phase-change conditions—evaporation and condensation—are modeled, focusing on kinetic theory and empirical correlations. Also, numerical and experimental results are synthesized to quantify performance enhancements from nanofluids, including thermal resistance reduction and capillary limit extension, while addressing inconsistencies in stability and pressure drop trade-offs. Finally, applications spanning electronics cooling, aero-space, and renewable energy systems are evaluated, underscoring nanofluids’ potential to expand heat pipe usability in extreme environments. The review identifies critical gaps, such as long-term nanoparticle stability and scalability of lab-scale models, while advocating for unified frameworks to optimize nanofluid selection and wick design. This work serves as a foundational reference for researchers and engineers aiming to advance heat pipe technology through nanofluid integration, balancing theoretical rigor with practical feasibility. Full article

Background: A series of novel polysubstituted thiazole derivatives were synthesized, and their antiproliferative properties were evaluated using both 2D and 3D lung cancer models. Methods: The compounds were obtained via esterification, oximation, hydrazinolysis, and condensation reactions. Results: Structure–activity relationship analysis revealed that the antiproliferative activity was structure-dependent. Notably, oxime derivatives 21 and 22, along with carbohydrazides 25 and 26, exhibited low micromolar activity that was significantly greater than that of cisplatin (p < 0.005), a standard chemotherapeutic agent. These compounds demonstrated potent, antiproliferative activity against H69 small-cell lung carcinoma cells, as well as anthracycline-resistant H69AR cells. Moreover, compounds 21, 22, 25, and 26 effectively induced cell death in A549 agarose-based 3D spheroids, further supporting their potential therapeutic application. The in silico studies proposed that compound 22 is able to interact with human SIRT2 and EGFR via conserved amino acid residues. Conclusions: The ability of these thiazole derivatives to target both drug-sensitive and drug-resistant lung cancer models highlights their promise as scaffolds for further optimization and preclinical development. Future studies will focus on structural modifications to enhance potency, selectivity, and pharmacokinetic properties, paving the way for the development of novel thiazole-based antiproliferative agents. Full article

Thermotropic polyesters are a subject of keen interest due to their exceptional heat resistance, thermal stability, and high strength. However, these thermal characteristics pose significant constraints on standard manufacturing processes, as the melting temperatures of these polymers can exceed 300 °C. This study explored the feasibility of manufacturing final items molded from prepolymers through a solid-state polymerization process. A copolymer composed of 4-acetoxybenzoic acid (4ABA), 3-acetoxybenzoic acid (3ABA), and 4′-acetoxybiphenyl-4-carboxylic acid (ABCA) was synthesized using melt polycondensation. To comprehensively evaluate the performance of the resulting material, several sets of samples were prepared, including those containing TiO₂. Experimental samples from the pre-polymers were obtained through injection molding followed by high-temperature solid-state post-polymerization. The final products underwent a range of tests, including rheological and mechanical analyses, as well as thermal evaluations. The products demonstrated sufficient strength and stability. The proposed method of solid-state post-condensation offers significant potential advantages for the practical application of manufacturing high-performance engineering materials. Full article