Search Results (246)

According to the United Nations Environment Programme reports, buildings are responsible for nearly 40% of energy-related emissions; therefore, energy-optimized building design is crucial to reduce the reliance on non-renewable energy sources as well as greenhouse gas emissions. The OECD reports indicate the use of Building Information Modelling (BIM) as one of the effective strategies for decarbonization of buildings, since a 3D digital representation of both physical and functional characteristics of a building can help to design a more efficient infrastructure. An efficient integration of solar energy in building design can be vital for the enhancement of energy performance in terms of heating, cooling, and lighting demand. This paper presents results of an analysis of how factors related to the use of daylight, such as automatic control of artificial lighting, external shading, or the visual absorptance of internal surfaces, influence the energy efficiency within an example room in two different climatic zones. The simulation was conducted using Design Builder software, with predefined occupancy schedules and internal heat gains, and standard EPW weather files for Warsaw and Genua climate zones. The study indicates that for the examined room, when no automatic sunshades or a lighting control system is utilized, most of the final energy demand is for cooling purposes (45–54%), followed by lighting (42–43%), with only 3–12% for heating purposes. The introduction of sunshades and/or the use of daylight allowed for a reduction of the total demand by up to half. Moreover, it was pointed out that often neglected factors, like the colour of the internal surfaces, can have a significant effect on the final energy consumption. In variants with light interior, the total energy consumption was lower by about 3–4% of the baseline demand, compared to their corresponding ones with dark surfaces. These results are consistent with previous studies on daylighting strategies and highlight the importance of considering both visual and thermal impacts when evaluating energy performance. Similarly, possible side effects of certain actions were highlighted, such as an increase in heat demand resulting from a reduced need for artificial lighting. The results of the analysis highlight the potential of a simulation-based design approach in optimizing daylight use, contributing to the broader goals of building decarbonization. Full article

Resettlement communities in Qinghai are located in cold, high-altitude regions with dry climates and strong solar radiation. Although not extremely cold, the moderate heating demand aligns well with high solar availability, making passive design highly effective for reducing energy use. This study investigates solar-optimized spatial configurations that enhance passive energy performance while addressing functional settlement needs. Through parametric modeling and climate-responsive simulations, four key spatial parameters are examined: building spacing, courtyard depth, density, and volumetric ratio. The findings highlight the dominant role of front–rear spacing in solar access, with optimal values at 3–4 m for single-story and 5–10 m for two-story buildings, balancing radiation gain and land use efficiency. Courtyard depths under 2.7 m significantly limit south façade exposure due to shading from the opposite courtyard wall under low-angle winter sun. This reduction results in the south façade attaining only 55.7–79.6% of the solar radiation acquisition by an unobstructed south façade (the baseline). Meanwhile, clustered orientations reduce inter-building shading losses by 38–42% compared to dispersed layouts. A three-tiered design framework is proposed: (1) macro-scale solar orientation zoning, (2) meso-scale spacing tailored to building height, and (3) micro-scale courtyard modulation for low-angle winter radiation. Together, these strategies provide practical, scalable guidelines for energy-efficient, climate-responsive settlement design in the alpine regions of Qinghai. Full article

Sustainable building design is significantly impacted by the local climate response knowledge ingrained in traditional architecture. However, its integration and dissemination with contemporary green technologies are limited by the absence of a comprehensive quantitative analysis of the regulation of its humid and temperature environment. The Ganzhou Wei family compound from China’s wind–heat environmental regulation systems are examined in this study. We statistically evaluate the synergy between spatial morphology, material qualities, and microclimate using field data with Thsware and Ecotect software in a multiscale simulation framework. The findings indicate that the compound’s special design greatly controls the thermal and wind conditions. Cold alleyways and courtyards work together to maximize thermal environment regulation and encourage natural ventilation. According to quantitative studies, courtyards with particular depths (1–4 m) and height-to-width ratios (e.g., 1:1) reduce wind speed loss. A cool alley (5:1 height–width ratio) creates a dynamic wind–speed–temperature–humidity balance by lowering summer daytime temperatures by 2.5 °C. It also serves as a “cold source area” that moderates temperatures in the surrounding area by up to 2.1 °C. This study suggests a quantitative correlation model based on “spatial morphology–material performance–microclimate response,” which offers a technical route for historic building conservation renovation and green renewal, as well as a scientific foundation for traditional buildings to maintain thermal comfort under low energy consumption. Although based on a specific geographical case, the innovative analytical methods and strategies of this study are of great theoretical and practical significance for promoting the modernization and transformation of traditional architecture, low-carbon city construction, and sustainable building design. Full article

This research proposes an integrated lighting and solar shading strategy to improve energy efficiency and user comfort in a retrofit project in a temperate-humid climate. The study examines a future library addition to an existing faculty building in Bursa, featuring highly glazed façades (77% southwest, 81% northeast window-to-wall ratio), an open-plan layout, and situated within an unobstructed low-rise campus environment. Trade-offs between daylight availability, heating, cooling, lighting energy use, and visual and thermal comfort are evaluated through integrated lighting (DIALux Evo), climate-based daylight (CBDM), and energy simulations (DesignBuilder, EnergyPlus, Radiance). Fifteen solar shading configurations—including brise soleil, overhangs, side fins, egg crates, and louvres—are evaluated alongside a daylight-responsive LED lighting system that meets BS EN 12464-1:2021. Compared to the reference case’s unshaded glazing, optimal design significantly improves building performance: a brise soleil with 0.4 m slats at 30° reduces annual primary energy use by 28.3% and operational carbon emissions by 29.1% and maintains thermal comfort per ASHRAE 55:2023 Category II (±0.7 PMV; PPD < 15%). Daylight performance achieves 91.5% UDI and 2.1% aSE, with integrated photovoltaics offsetting 129.7 kWh/m² of grid energy. This integrated strategy elevates the building’s energy class under national benchmarks while addressing glare and overheating in the original design. Full article

As climate change intensifies the frequency and severity of extreme weather events, the urgency for resilient and sustainable urban development becomes increasingly critical. This study investigates the role of digital twins in advancing climate-responsive urban strategies, with a focus on their integration into zero-energy buildings (ZEBs) and smart city frameworks. A systematic literature review was conducted following PRISMA guidelines, covering 1000 articles initially retrieved from Scopus and Web of Science between 2014 and 2024. After applying inclusion and exclusion criteria, 70 full-text articles were analyzed. Bibliometric analysis using VOSviewer revealed five key application areas of digital twins: energy efficiency optimization, renewable energy integration, design and retrofitting, real-time monitoring and control, and predictive maintenance. The findings suggest that digital twins can contribute to up to 30–40% improvement in building energy efficiency through enhanced performance monitoring and predictive modeling. This review synthesizes trends, identifies research gaps, and contextualizes the findings within the Middle Eastern urban landscape, where climate action and smart infrastructure development are strategic priorities. While offering strategic guidance for urban planners and policymakers, the study also acknowledges limitations, including the regional focus, lack of primary field data, and potential publication bias. Overall, this work contributes to advancing digital twin applications in climate-resilient, zero-energy urban development. Full article

Integrating nature-based solutions into sustainable urban design has become increasingly important in response to rapid urbanization and climate-related environmental challenges. As part of these solutions, green walls not only enhance the thermal and acoustic performance of buildings but also contribute to urban ecosystem health by supporting biodiversity. In this context, the careful selection of plant species is essential to ensure ecological efficiency, resilience, and low maintenance. This study presents a model for selecting plant species suitable for natural green walls in Mediterranean cities, with a focus on habitats protected under Directive 92/43/EEC. The selection followed a multi-phase process applied to the native flora of Italy, using criteria such as chorological type, life form, ecological indicator values, altitudinal range, and habitat type. Alien and invasive species were excluded, favoring only native Mediterranean species adapted to local pedoclimatic conditions and capable of providing ecosystem, esthetic, and functional benefits. The outcome of this rigorous screening led to the identification of a pool of species suitable for green wall systems in Mediterranean urban settings. These selections offer a practical contribution to mitigating the urban heat island effect, improving air quality, and enhancing biodiversity, thus providing a valuable tool for designing more sustainable and climate-adaptive buildings. Full article

Biophilic design has emerged as a multidimensional response to growing concerns about health, well-being, and ecological balance in the built environment. Despite its rising prominence, research on the topic remains fragmented across building typologies, user groups, and geographic contexts. This study presents a comprehensive review of the biophilic design literature, employing a hybrid methodology combining structured content analysis and bibliometric mapping. All peer-reviewed studies indexed in the Web of Science and Scopus were manually screened for architectural relevance and systematically coded. A total of 435 studies were analysed to identify key trends, thematic patterns, and research gaps in the biophilic design discipline. This review categorises the literature by methodological strategies, building typologies, spatial scales, population groups, and specific biophilic design parameters. It also examines geographic and cultural dimensions, including climate responsiveness, heritage buildings, policy frameworks, theory development, pedagogy, and COVID-19-related research. The findings show a strong emphasis on institutional contexts, particularly workplaces, schools, and healthcare, and a reliance on perception-based methods such as surveys and experiments. In contrast, advanced tools like artificial intelligence, simulation, and VR are notably underused. Few studies engage with neuroarchitecture or neuroscience-informed approaches, despite growing recognition of how spatial design can influence cognitive and emotional responses. Experimental and biometric methods remain scarce among the few relevant contributions, revealing a missed opportunity to connect biophilic strategies with empirical evidence. Regarding biophilic parameters, greenery, daylight, and sensory experience are the most studied parameters, while psychological parameters remain underexplored. Cultural and climate-specific considerations appear in relatively few studies, and many fail to define a user group or building typology. This review highlights the need for more inclusive, context-responsive, and methodologically diverse research. By bridging macro-scale bibliometric patterns with fine-grained thematic insights, this study provides a replicable review model and valuable reference for advancing biophilic design as an evidence-based, adaptable, and human-centred approach to sustainable architecture. Full article

The construction sector presently consumes about 40% of global energy and generates 36% of CO₂ emissions, making facade retrofits a priority for decarbonising buildings. This review clarifies how ventilated facades (VFs), wall assemblies that interpose a ventilated air cavity between outer cladding and the insulated structure, address that challenge. First, the paper categorises VFs by structural configuration, ventilation strategy and functional control into four principal families: double-skin, rainscreen, hybrid/adaptive and active–passive systems, with further extensions such as BIPV, PCM and green-wall integrations that couple energy generation or storage with envelope performance. Heat-transfer analysis shows that the cavity interrupts conductive paths, promotes buoyancy- or wind-driven convection, and curtails radiative exchange. Key design parameters, including cavity depth, vent-area ratio, airflow velocity and surface emissivity, govern this balance, while hybrid ventilation offers the most excellent peak-load mitigation with modest energy input. A synthesis of simulation and field studies indicates that properly detailed VFs reduce envelope cooling loads by 20–55% across diverse climates and cut winter heating demand by 10–20% when vents are seasonally managed or coupled with heat-recovery devices. These thermal benefits translate into steadier interior surface temperatures, lower radiant asymmetry and fewer drafts, thereby expanding the hours occupants remain within comfort bands without mechanical conditioning. Climate-responsive guidance emerges in tropical and arid regions, favouring highly ventilated, low-absorptance cladding; temperate and continental zones gain from adaptive vents, movable insulation or PCM layers; multi-skin adaptive facades promise balanced year-round savings by re-configuring in real time. Overall, the review demonstrates that VFs constitute a versatile, passive-plus platform for low-carbon buildings, simultaneously enhancing energy efficiency, durability and indoor comfort. Future advances in smart controls, bio-based materials and integrated energy-recovery systems are poised to unlock further performance gains and accelerate the sector’s transition to net-zero. Emerging multifunctional materials such as phase-change composites, nanostructured coatings, and perovskite-integrated systems also show promise in enhancing facade adaptability and energy responsiveness. Full article

With increasing global climate change, extreme weather threats to indoor environments are growing. Heatwave events provide essential data for building thermal resilience analysis. However, existing heatwave definition indicators vary widely and lack standardized criteria. To more accurately evaluate indoor overheating risks, this study compared indoor overheating responses under different heatwave definition indicators, considering the temporal disconnect between indoor and outdoor heat conditions. Focusing on Beijing, this study established an indoor–outdoor coupled heatwave evaluation framework using 1951–2021 meteorological data and the heat index as an overheating metric. By analyzing indoor overheating degree and overlap degree to characterize indoor–outdoor correlations, we concluded that different definitions of heatwaves lead to variations in identifications, while multidimensional indicators better capture extreme events. Heatwaves with prolonged duration and high intensity pose greater health risks. Although Beijing’s indoor thermal conditions are generally safe, peak heat indices during summer heatwaves exceed danger thresholds in some buildings, highlighting thermal safety concerns. The metrics for heatwave 6 and heatwave 7 optimally integrate indoor–outdoor characteristics with higher thresholds identifying more extreme events. These findings support the design of building thermal resilience, overheating early warnings, and climate-adaptive electrification strategies. Full article

To address thermal imbalance and ground temperature degradation in shallow geothermal heat pump (GSHP) systems in severely cold climates, this study analyzes a typical logistics building using an hourly dynamic load model. Multiyear simulations were conducted to investigate the coupling between building load variation and soil thermal response. The results indicate that with a cumulative heating load of 14.681 million kWh and cooling load of 6.3948 million kWh, annual heat extraction significantly exceeds heat rejection, causing ground temperature to decline by about 1 °C per year. Over five and ten years, the cumulative drops reached 2.65 °C and 4.71 °C, respectively, leading to a noticeable reduction in borehole heat exchanger performance and system COP. The study quantitatively evaluates ground temperature and heat exchange degradation, highlighting the key role of load imbalance. To mitigate long-term thermal deterioration, strategies such as load optimization, summer heat reinjection, and operational adjustments are proposed. The findings offer guidance for the design and sustainable operation of GSHP systems in cold regions. Full article

Climate change poses significant risks to public health, particularly for vulnerable populations such as older adults. In Mexico, where extreme weather events are becoming more frequent, understanding how this demographic perceives climate-related health risks is crucial for designing effective adaptation strategies. Limited research exists on this topic; this pilot study aims to assess the perceptions of climate related health risks among older adults from a multidisciplinary team, with data collected at the Centro Médico Nacional “La Raza” in Mexico City. Using a cross-sectional, descriptive, and observational survey design, data were collected from hospitalized and outpatient individuals using a validated instrument that measures perceived environmental and emotional impacts of climate change. Key findings reveal varying levels of awareness and emotional responses to environmental changes, such as heatwaves, droughts, and ecosystem degradation. Participants’ sociodemographic characteristics and existing health conditions are also documented to explore their association with climate risk perceptions. The study highlights the need for tailored health communication strategies and adaptive policies that address the specific vulnerabilities and perceptions of older adults. Results will contribute to building climate-resilient health interventions and support the development of inclusive public health strategies amid global climate change in the country. Full article

This study proposes a building energy element technology system that addresses cooling loads, in response to rising average temperatures due to global warming caused by climate change. The study analyzes performance variations and energy-saving potential based on design parameters of individual element technologies, utilizing both simulation and field demonstration to derive an integrated Cooling Load Package System (CPS). The methodology comprises three key steps: (1) identifying and selecting element technologies suitable for optimal building design under subtropical climate conditions, (2) employing the building energy simulation software EnergyPlus v9.6.0 to evaluate the energy performance of each technology and establish prioritization based on energy-saving potential, and (3) conducting local climate validation through the construction of an outdoor demonstration site in northern Vietnam to assess the real-world energy-saving effectiveness of the proposed CPS. Full article

This study presents the development and characterization of sustainable bio-bricks incorporating agricultural residues—specifically coffee husks and bovine excreta—as partial substitutes for cement. A mixture design optimized through response surface methodology (RSM) identified the best-performing formulation, namely 960 g of cement, 225 g of lignin (extracted from coffee husks), and 315 g of bovine excreta. Experimental evaluations included compressive and flexural strength, water absorption, density, thermal conductivity, transmittance, admittance, and acoustic transmission loss. The optimal mixture achieved a compressive strength of 1.70 MPa and a flexural strength of 0.56 MPa, meeting Colombian technical standards for non-structural masonry. Its thermal conductivity (~0.19 W/(m×K)) and transmittance (~0.20 W/(m²×K)) suggest good insulation performance. Field tests in three Colombian climate zones confirmed improved thermal comfort compared to traditional clay brick walls, with up to 8 °C internal temperature reduction. Acoustic analysis revealed higher sound attenuation in bio-bricks, especially at low frequencies. Chemical and morphological analyses (SEM-EDS, FTIR, and TGA) confirmed favorable thermal stability and the synergistic interaction of organic and inorganic components. The findings support bio-bricks’ potential as eco-efficient, low-carbon alternatives for sustainable building applications. Full article

Underground spaces offer significant potential for sustainable urban development, particularly in cold climate regions where surface thermal fluctuations are extreme. However, optimizing the wind–heat environmental performance of such spaces remains insufficiently explored, especially in relation to spatial morphology. This study addresses this gap by investigating how underground spatial configurations influence thermal comfort and ventilation efficiency. Six representative spatial prototypes—fully enclosed, single-side open, double-side open, central atrium, wind tower, and earth kiln—were constructed based on common underground design typologies. Computational fluid dynamics (CFD) simulations were conducted to evaluate airflow patterns and thermal responses under winter and summer conditions, incorporating relevant geotechnical properties into the boundary setup. The results indicate that deeper burial depths enhance thermal stability, while central atrium and wind tower prototypes offer the most balanced performance in both ventilation and heat regulation. These findings provide valuable design guidance for climate-responsive underground developments and contribute to the interdisciplinary integration of building physics, spatial design, and geotechnical engineering. Full article

The building sector, responsible for approximately 40% of global energy consumption, is increasingly embracing nearly zero-energy buildings (NZEBs) to promote environmental sustainability. Focusing specifically on single-family houses, this review systematically examines current NZEB practices across Europe, aiming to identify regional adaptation strategies and highlight performance disparities. The primary research question explored is as follows: how do design strategies, renewable energy integration, and climate adaptation measures for single-family NZEBs vary across Northern, Eastern, Southern, and Western European countries? A key gap in the literature is the lack of cross-comparative analysis of regional NZEB approaches for single-family houses, despite their significant share in Europe’s housing sector. Effective NZEB implementation depends on interdisciplinary collaboration among architects, engineers, and energy experts to optimize building design elements, including orientation, envelope insulation, and HVAC systems, tailored to regional climatic conditions. A systematic analysis of case studies was conducted, synthesizing data on primary energy consumption, CO₂ emissions, and building envelope performance. The findings reveal regional differences: Northern Europe exhibits primary energy consumption at 27–68 kWh/(m²·y) (mean: 48.2), Eastern Europe at 29–68 (mean: 42.5), Southern Europe at 35–42 (mean: 39.1), and Western Europe at 27–85 (mean: 51.5), with higher emissions in Eastern Europe compared to Denmark, for instance. These patterns underscore the role of climatic conditions and regulatory frameworks of the regions in shaping NZEB strategies. Despite shared goals of decarbonization and occupant comfort, significant knowledge gaps remain, particularly regarding long-term operational performance and regional comparison of other building types. Full article