Search Results (30)

This study assessed the potential for natural anti-microbials to control Listeria monocytogenes in vacuum packed beef burgers. Minimum inhibitory and bactericidal concentration (MIC and MBC) results for natural anti-microbials (carvacrol; essential oils of thyme, rosemary, clove and cinnamon; hop extract; cranberry extract; cranberry pomace; propolis extract; and chitosan sourced from both shrimp and mushroom) were used to select agents (n = 6) showing the most promise against L. monocytogenes. These agents, including chitosan from shrimp and mushroom (a novel source), and cranberry extract, were then tested against L. monocytogenes in vacuum packed beef burgers during chilled storage (3 ± 1 °C, 16 days). Following storage (16 d), the number of L. monocytogenes in beef burgers treated with chitosan (2.5%), regardless of source, was significantly lower (p < 0.05) (1.2 to 1.6 log₁₀CFU g⁻¹) than in the control samples, while smaller reductions (0.5 log₁₀ CFU g⁻¹; p < 0.05) were noted in samples with cranberry extract (0.625%). While chitosan had no significant impact on HunterLab colour measurements during chilled storage, cranberry extract significantly impacted the colour (p < 0.05), resulting in lower L*, a*, and b* values. Observational assessment of colour, odour and the overall quality of the raw meat on opening the pack found that beef burgers with added chitosan (both sources) were acceptable, while those with added cranberry extract received an overall quality score of approximately 5.4, which is above the acceptability threshold (5/10). Overall, the study showed the potential of chitosan to control L. monocytogenes in beef burgers, and the advantage of this agent sourced from mushrooms is discussed. Full article

The ability to efficiently store raw emulsion and market it as a ready-to-cook convenience meat product would be extremely advantageous to society and the global meat business. With this innovation, consumers may easily make a range of fresh emulsion-based meat products, saving time and labour. The current study was thus designed with the goal of improving the quality and storage stability of meat emulsions by using chitosan-based thyme (Thymus vulgaris) and oregano (Origanum vulgare) essential oil nanoparticles as natural preservatives. The treatments included the following: T0—control; T1—emulsion added with chitosan nanoparticles @ 500 ppm; T2—emulsion added with thyme essential oil nanoparticles @ 500 ppm; T3—emulsion added with oregano essential oil nanoparticles @ 500 ppm; and T4—positive control added with synthetic additive butylated hydroxytoluene @ 200 ppm. TBARS (Thiobarbituric acid reactive substances) values revealed that T2 and T3 exhibited greater oxidative stability throughout storage. Protein carbonyl levels increased at a slower rate during storage in nano-treated essential oil groups. DPPH (2, 2 diphenyl-1-picryl hydrazyl) and FRAP (Ferric Reducing Anti-Oxidant Power) values decreased significantly (p < 0.05) during storage, with T3 having the strongest anti-oxidant activity. T2 and T3 had consistently greater texture values than the other groups. T2 and T3 demonstrated lower values for microbiological parameters, particularly on day 7 and 15. The storage stability period of emulsion was 3 days for T0 and T4, while as it was 6 days for T1 and 9 days for T2 and T3. T2 and T3 showed higher sensory scores, affirming their superior sensory appeal to other treatments. In conclusion, the essential oil nanoparticle treatments resulted in better quality and storage stability of meat emulsions during aerobic refrigerated storage. Full article

Active packaging using an edible coating could be an essential and sustainable alternative solution to preserve the properties of fruits and to prevent food loss and food waste. Fruits generate significant food wastes and losses. Reducing food waste is a global priority. For this research, nature-based solutions (NBSs) were applied, using micro-sized chitosan (CsMPs) and selenium microparticles (SeMPs), which are green-synthesized from black tea leaf extracts, and thyme essential oil. In this study, the effects of the new generation active food preservative coating agents formed from combinations of micro-sized chitosan (CsMPs) and selenium (SeMPs), and thyme essential oil (Oil) on the quality of “0900 Ziraat” sweet cherry fruits after harvest were investigated. After the fruits were coated with edible colloid solution, they were stored at 4 °C and 21 °C for 20 days, and quality parameter analyses were performed on days 0, 5, 10, 15, and 20. As a result of this study, it was determined that the application of CsMPs + SeMPs and the subsequent application of CsMPs + SeMPs + Oil from colloid solution coatings reduced weight loss, respiration, and decay rates. Also, it was determined that these applications were the most effective in preserving color values (L*, chroma, and hue), fruit firmness, total soluble solid (TSS) amount, acidity content and total phenolics, anthocyanin, and antioxidant capacity. These results show that CsMPs + SeMPs and CsMPs + SeMPs + Oil applications can be used as edible coatings to preserve the quality of sweet cherry fruits and extend their shelf life after harvest. This study’s results will contribute to obtaining micro-sized composite coating agents/agents produced with new technology to extend the shelf life. Full article

The effect on the physical, mechanical, and antibacterial properties of films composed of alginate-chitosan with the incorporation of oregano (EOO) or thyme (EOT) essential oils was evaluated. These films showed a thickness between 37.7 and 38.2 µm, with no significant differences for essential oil content. Water vapor permeability decreased from 4.03 (oil-free film) to 1.65 (g/msPa) × 10⁻⁹ in 3% EO. Mechanical properties reflected a reduction in tensile strength (TS) from 73 (oil-free films) to values between 34 and 38 MPa with 3% EO, while elongation (E%) increased from 4.8% to 10.4–11.8%. Regarding antibacterial capacity, as the concentration of essential oil increases, the antibacterial capacity also increases. On average, the increase from 1.0% to 3.0% of EOO increased the antimicrobial capacity against Gram-negative and Gram-positive bacteria. EOO outperformed EOT against E. coli and L. monocytogenes. In addition, films with 2–3% EOT showed a significant dark yellow color compared to the control. These results suggest that films with the addition of oregano and thyme essential oils can be promising for food packaging applications with the ability to improve food safety and increase product shelf life by achieving functional packaging characteristics. Full article

The preservation of fish and seafood represents a significant challenge for the food industry due to these products’ high susceptibility to microbial spoilage. Essential oils (EOs), classified as Generally Recognized as Safe (GRAS), have become a natural alternative to synthetic preservatives due to their antimicrobial and antioxidant properties. This review aims to analyze the specific potential of EOs in extending the shelf life of fish and seafood products, offering a natural and effective preservation solution. It provides a detailed overview of EOs applications and mechanisms, highlighting their role in controlling spoilage microorganisms while maintaining product quality. The main methods of EOs application include immersion, spraying, and pipetting, with antimicrobial effectiveness influenced by factors such as concentration, exposure time, and food characteristics like chemical composition and biofilms. Direct EOs application shows challenges that can be countered by exploring nanoemulsion technology as an effective strategy to enhance EOs stability and controlled release, maximizing their preservation impact. Additionally, coatings made from chitosan, gelatin, Farsi gum, and carrageenan, combined with EOs such as oregano, clove, and thyme have shown efficacy in preserving species like rainbow trout, mackerel, and shrimp. However, the commercial feasibility of using EOs in fish preservation depends on consumer acceptance and regulatory compliance. This review offers valuable insights for the industry and researchers by highlighting the practical applications and commercial challenges of EOs in seafood products, underscoring the importance of consumer acceptance and regulatory adherence for market viability. Full article

Finding safe and reliable alternatives to fungicides is currently one of the biggest challenges in agriculture. In this regard, this experiment investigated the effectiveness of different elicitors, botanical extracts and essential oils to control grey mold (Botrytis cinerea) and powdery mildew (Podosphaera aphanis) on strawberry plants. This trial was conducted in field conditions under a plastic tunnel with strawberry plants ‘Elsanta’. A first group of strawberry plants was treated before flowering with elicitors [acibenzolar-S-Methyl–(BTH), chitosan], botanical extracts (seaweed extract, alfalfa hydrolysate) and essential oils (thyme and juniper), and grey mold incidence on flowers was evaluated (Experiment 1). Furthermore, a second group of plants was treated before (Experiment 2) and after (Experiment 3) controlled inoculation with P. aphanis. The results indicated that the incidence of flower infected by B. cinerea was reduced by approximately 50% with thyme and juniper essential oils’ applications compared to the untreated control, with no significant difference observed compared to the commercial fungicide penconazole (positive control). As a consequence, the final yield of essential-oil-treated plants was +27% higher than that of non-treated plants. No significant differences emerged for other tested products against grey mold. However, gene expression analysis showed an up-regulation (>2 ÷ 5 folds as compared to control 4 days after application) of FaEDS1, FaLOX and PR gene expression (FaPR1, FaPR5, FaPR10) in leaves treated with BTH. The other natural substances tested also induced defense-related genes, albeit at a lower level than BTH. In Experiment 2, all treatments applied prior to inoculation significantly reduced the incidence and severity of powdery mildew as compared to control. At 28 days after inoculation, chitosan and thyme essential oil applications performed similarly to their positive controls (BTH and penconazole, respectively), showing a significant reduction in disease incidence (by −84 and −92%) as compared to control. Post-inoculum application of essential oils (Experiment 3) showed an efficacy similar to that of penconazole against powdery mildew. These results indicated that the tested substances could be used as alternatives to fungicides for the control of grey mold and powdery mildew in strawberry, therefore representing a valuable tool for the control of these fungal diseases under the framework of sustainable agriculture. Full article

An excessive amount of chromium in soil has detrimental effects on plant processes, and impairs food security, and public health. The application of nanoparticles may be a suitable solution and an innovative strategy by which to reduce plant abiotic stresses and pollution in the agricultural ecosystems. This research focuses on the effects of chitosan nanoparticles (CS-NPs) on thyme (Thymus vulgaris L.) plants grown in Cr-contaminated soil. The effects of CS-NPs as a soil amendment at four concentrations were investigated on plant nutrient uptake, photosynthesis parameters, antioxidant system, and essential oil (EO) content under soil Cr stress. The results show that chromium stress reduced fresh and dry weight of shoots, the uptake of macro-, and micro-elements, chlorophyll and carotenoids. The application of CS-NPs improved the antioxidant enzyme activity, reduced malondialdehyde, and increased the content of nutrients, EOs, photosynthetic pigments, and chlorophyll fluorescence parameters. The intermediate dose of chitosan nanoparticles (0.1% w/v) best valorized the content and yield of thyme EOs under chromium stress. These results are indicative that the application of CS-NPs can represent a supportive approach for plant production in soils contaminated with heavy metals. Full article

This study was performed to check the effect of different essential oils on chitosan and gelatin-based antimicrobial films. Films prepared from biopolymers contain better mechanical strength but lack in moisture barrier properties. In order to increase the moisture barrier properties of chitosan and gelatin-based films in the current research work, different essential oils, i.e., thyme, cinnamon, basil, ginger, and cumin, at varying concentrations (1.0, 1.5, and 2.0%) were incorporated. Moreover, the concentrations of glycerol (plasticizer) and emulsifier (Tween 20) were kept constant to maintain homogeneity in the research. Antimicrobial films composed of gelatin and chitosan infused with essential oils were evaluated for their physicochemical (emulsion stability, particle size, and viscosity), FT-IR, microstructural (scanning electron microscopy), moisture barrier (water vapor permeability), and antimicrobial properties (E. coli, Salmonella, and S. aureus). Study outcomes elucidated significant variations (p < 0.05) as the concentration of essential oil was increased in the film solutions. An increased concentration of essential oil (2.0%) significantly enhanced the moisture barrier properties (1.12 ± 0.03 g.mm/kPa.h.m²). Nevertheless, the tensile strength decreased (38.60 ± 1.4 to 31.50 ± 1.5 MPa) from 1 to 2%. The increase in essential oil concentration in the emulsion-based films also influenced their physicochemical characteristics, such as droplet size, viscosity, and emulsion stability. At lower concentrations (1.0%), films exhibited a uniform microstructure but lacked moisture barrier properties. Antimicrobial properties against E. coli, Salmonella, and S. aureus showed an increased inhibition effect as the concentration of essential oil was increased. Of the essential oil-based films, ginger- and basil-based films showed greater inhibition effects as compared to the other essential oils. Overall, antimicrobial films containing a 1.5% concentration of ginger and basil oil showed better results as compared to the other treatments for mechanical, moisture barrier, and antimicrobial properties, while films with a 2.0% oil concentration showed better antimicrobial and moisture barrier properties but lacked in mechanical properties. Essential oil-based antimicrobial films have prospective applications in foods, specifically in fresh and processed food items such as seafood, meat, chicken, and sausages. Full article

Biocompatible drug-delivery systems for soft tissue applications are of high interest for the medical and pharmaceutical fields. The subject of this research is the development of hydrogels loaded with bioactive compounds (inulin, thyme essential oil, hydro-glycero-alcoholic extract of Vitis vinifera, Opuntia ficus-indica powder, lactic acid, citric acid) in order to support the vaginal microbiota homeostasis. The nanofibrillar phyto-hydrogel systems developed using the biocompatible polymers chitosan (CS), never-dried bacterial nanocellulose (NDBNC), and Poloxamer 407 (PX) incorporated the water-soluble bioactive components in the NDBNC hydrophilic fraction and the hydrophobic components in the hydrophobic core of the PX fraction. Two NDBNC-PX hydrogels and one NDBNC-PX-CS hydrogel were structurally and physical-chemically characterized using Fourier-transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), transmission electron microscopy (TEM), and rheology. The hydrogels were also evaluated in terms of thermo-responsive properties, mucoadhesion, biocompatibility, and prebiotic and antimicrobial effects. The mucin binding efficiency of hydrogel base systems was determined by the periodic acid/Schiff base (PAS) assay. Biocompatibility of hydrogel systems was determined by the MTT test using mouse fibroblasts. The prebiotic activity was determined using the probiotic strains Limosilactobacillus reuteri and Lactiplantibacillus plantarum subsp. plantarum. Antimicrobial activity was also assessed using relevant microbial strains, respectively, E. coli and C. albicans. TEM evidenced PX micelles of around 20 nm on NDBNC nanofibrils. The FTIR and XRD analyses revealed that the binary hydrogels are dominated by PX signals, and that the ternary hydrogel is dominated by CS, with additional particular fingerprints for the biocompounds and the hydrogel interaction with mucin. Rheology evidenced the gel transition temperatures of 18–22 °C for the binary hydrogels with thixotropic behavior and, respectively, no gel transition, with rheopectic behavior for the ternary hydrogel. The adhesion energies of the binary and ternary hydrogels were evaluated to be around 1.2 J/m² and 9.1 J/m², respectively. The hydrogels exhibited a high degree of biocompatibility, with the potential to support cell proliferation and also to promote the growth of lactobacilli. The hydrogel systems also presented significant antimicrobial and antibiofilm activity. Full article

Anthracnose, which is caused by the fungus Colletotrichum gloeosporioides (Penz.) Penz. and Sacc. (C. gloeosporioides), is the main disease that affects soursop fruits and causes accelerated deterioration due to the rotting process. The objective of this study was to evaluate the effect of chitosan-based coatings with essential oils on the physiological, antifungal, and shelf-life properties of soursop. Chitosan-based coatings were combined with essential oils of cinnamon and thyme and applied to soursop. The parameters evaluated were respiration and ethylene by gas chromatography, shelf life, weight loss, total soluble solids, color, maturity index, and titratable acidity. The chitosan obtained had a molecular weight of 169 kDa and an 83% degree of deacetylation; respiration and ethylene values showed significant reductions of 47 and 50% with coatings. Weight loss was reduced by up to 50%, even on inoculated fruits, and shelf life increased by two days. Chitosan-based coatings with essential oils are an appropriate alternative to improve the quality of soursop and decrease the effect of C. gloeosporioides. Full article

Ecological and safe packaging solutions arise as pivotal points in the development of an integrated system for sustainable meat production. The aim of this study was to assess the effect of a combined chitosan (Ch) + green tea extract (GTE) + essential oil (thyme oil, TO; flaxseed oil, FO; or oregano oil, OO) coating on the safety and quality of vacuum-packaged beef during storage at 4 °C. An optimized bio-based coating formulation was selected (2% Ch + 2% GTE + 0.1% FO) to be applied to three fresh beef cuts (shoulder, Sh; knuckle, Kn; Striploin, St) based on its pH (5.8 ± 0.1), contact angle (22.3 ± 0.4°) and rheological parameters (viscosity = 0.05 Pa.s at shear rate > 20 s⁻¹). Shelf-life analysis showed that the Ch–GTE–FO coating delayed lipid oxidation and reduced total viable counts (TVC) and Enterobacteriaceae growth compared with uncoated beef samples over five days. In addition, Ch–GTE–FO coating decreased total color changes of beef samples (e.g., ∆E* = 9.84 and 3.94, for non-coated and coated Kn samples, respectively) for up to five days. The original textural parameters (hardness, adhesiveness and springiness) of beef cuts were maintained during storage when Ch–GTE–FO coating was applied. Based on the physicochemical and microbial characterization results, the combination of the Ch–GTE–FO coating developed was effective in preserving the quality of fresh beef cuts during refrigerated storage along with vacuum packaging. Full article

Water stress is one of the critical abiotic stresses and limiting factors in the productivity of plants, especially in arid and semi-arid regions. In recent years, the application of bio-fertilizer and stress-modulating nanoparticles (NPs) is known as one of the eco-friendly strategies for improving plants quantity and quality under stressful conditions. In order to achieve the desirable essential oil (EO) quality and quantity of thyme in water deficit conditions, a 2-year field experiment was carried out as a split plot based on the randomized complete block design (RCBD), with 12 treatments and three replications. The treatments included different irrigation levels, containing irrigation at 80% field capacity (FC80) as no stress, 60% FC as moderate water stress (FC60) and 40% FC as severe water stress (FC40), as well as four different fertilizer sources, including non-application of fertilizer (control), application of arbuscular mycorrhizal fungi (AMF), chitosan NPs (CHT) and co-application of AMF+CHT NPs. The results demonstrated that the dry yield of thyme decreased by 13% and 40.3% under FC60 and FC40 water stress conditions. However, co-application of AMF+CHT NPs enhanced the dry yield of thyme by 21.7% in comparison to the control (non-application of fertilizer). The maximum EO content (2.03%) and EO yield (10.04 g 7 g m⁻²) of thyme were obtained under moderate water stress (FC60) fertilized with AMF+CHT NPs. Co-application of AMF+CHT NPs enhanced the EO content and EO yield of thyme by 17.1% and 42.7%, respectively. Based on the GC-MS and GC-FID analysis, 38 constituents were identified in the thyme EO, with the major constituents being thymol (35.64–41.31%), p-cymene (16.35–19.38%), γ-terpinene (12.61–13.98%) and carvacrol (2.78–3.93%) respectively. The highest content of thymol and γ-terpinene was obtained under moderate water stress (FC60) fertilized with AMF+CHT NPs. In addition, the highest content of p-cymene and carvacrol was observed in the severe water stress (FC40) fertilized with AMF+CHT NPs. The present research suggests that the co-application of AMF+CHT NPs represents a sustainable and eco-friendly strategy for improving the EO quantity and quality of thyme under water stress conditions. Full article

Active packaging films based on chitosan/gelatin were prepared using a solution casting method by adding various essential oils (lime, tea tree, rosemary, and thyme essential oils), and their effects were compared. The fabricated films were characterized and various physical properties as well as the antioxidant performance of the films were studied. Adding essential oils to the polysaccharide/protein biopolymer mixtures resulted in compatible films with high transparency (>90% transparency). The mechanical strength and stiffness of the chitosan/gelatin films were improved by about 30% in the presence of essential oil, but the flexibility slightly decreased, and the stiffness improved. On the other hand, the water vapor barrier properties, thermal stability, and hydrophobicity of the essential oil-containing films were not significantly changed. Adding various essential oils significantly enhanced the antioxidant activity of chitosan/gelatin-based films. Therefore, bio-based functional films with added essential oils can be applied in active packaging applications. Full article

Apple fruits are susceptible to pathogenic fungi such as Botrytis cinerea and Penicillium expansum which are responsible for significant pre- and postharvest fruit losses. Given the strong restriction in the use of synthetic agrochemicals, especially during the postharvest phase, alternatives are currently sought for a more sustainable management of apple storage. The antifungal activity of thyme, clove, anise, camphor, and juniper essential oils (EOs) was evaluated with in vitro tests and the minimum inhibitory concentration (MIC) was determined. Thyme and anise EOs showed a MIC value of 0.5 and 1 mL L⁻¹ against B. cinerea, respectively. A MIC of 0.5 mL L⁻¹ was found for clove EO against P. expansum. Camphor and juniper EOs were found to be less effective. Although in those experiments the antifungal activity of EOs was proven, when EOs were applied in in vivo conditions they did not demonstrate the same effectiveness. In order to preserve EO inhibitory performances, edible coatings combining polysaccharide matrices (chitosan, arabic gum, and xanthan gum) with EOs were tested. After considering consistency, uniform coverage of the fruit surface, and antifungal properties of the matrix, chitosan was identified as the most suitable component for EO encapsulation. Treatments with chitosan in combination with thyme EO on apple fruits (cv. ‘Braeburn’) showed inhibitory effects on infection caused by B. cinerea (−48% of infected wounds compared to untreated). Similarly, clove EO combined with chitosan reduced the Penicillium infections in apple cv. ‘Golden Delicious’ by 62%. These results therefore suggest the effectiveness of the use of EOs encapsulated with chitosan for the control of postharvest diseases of apple fruits during storage. Full article

The concept of this study is the replacement of previous fossil-based techniques for food packaging and food shelf-life extension, with novel more green processes and materials following the spirit of circular economy and the global trend for environmentally positive fingerprints. A novel adsorption process to produce thymol-halloysite nanohybrids is presented in this work. The high dispersion of this thymol-halloysite nanostructure in chitosan biopolymer is one of the goals of this study. The incorporation of this biodegradable matrix with poly-vinyl-alcohol produced a very promising food-packaging film. Mechanical, water-oxygen barrier, antimicrobial, and antioxidant properties were measured. Transparency levels were also tested using a UV-vis instrument. Moreover, the developed films were tested in-vivo for the preservation and the extension of the shelf-life of kiwi fruits. In all cases, results indicated that the increased fraction of thymol from thyme oil significantly enhances the antimicrobial and antioxidant activity of the prepared chitosan-poly-vinyl- alcohol gel. The use of the halloysite increases the mechanical and water-oxygen barrier properties and leads to a control release process of thymol which extends the preservation and the shelf-life of kiwi fruits. Finally, the results indicated that the halloysite improves the properties of the chitosan/poly-vinyl-alcohol films, and the thymol makes them further advantageous. Full article