Search Results (450)

Electrocoagulation (EC) processes have emerged as an efficient solution for different inorganic and organic effluents. The main characteristics of this versatile process are its ease of operation and low sludge production. The literature indicates that EC can be successfully used as a single process or a step within a combined treatment system. If used in a combined system, this process could be employed as a pre-, a post-, or middle treatment step. Additionally, the EC process has been used in both continuous and batch modes. In most studies, EC has achieved significant improvements in the treated water quality and relatively low total energy consumption. This review presents a comprehensive evaluation and analysis of standalone and combined continuous EC processes. The influence of key operational parameters on continuous EC performance is thoroughly discussed. Furthermore, recent advancements in reactor design, modeling, and process optimization are addressed. The benefits of integrating other treatment processes with the EC process, such as advanced oxidation, membranes, chemical coagulation, and adsorption, are also evaluated. The performance of most standalone and combined EC processes used for organic pollutant treatment and published in the last 25 years is critically analyzed. This review is expected to give researchers many insights to improve their treatment scenario with recent and efficient environmental experiences, sustainability, and circular economy. The clearly presented information is expected to guide researchers in selecting efficient, cost-effective, and time-saving treatment alternatives. The findings ensure the considerable potential of continuous EC treatment processes for organic pollutants. However, more research is warranted to enhance process design, operational efficiency, scale-up, and economic viability. Full article

The accurate dosing of polyaluminum chloride (PAC) is essential for achieving effective coagulation in drinking water treatment, yet conventional methods such as jar tests are limited in their responsiveness and operational efficiency. This study proposes a hybrid modeling framework that integrates artificial neural networks (ANN) with genetic algorithms (GA) to optimize PAC dosage under variable raw water conditions. Operational data from 400 jar test experiments, collected between 2022 and 2024 at the Yanahurco water treatment plant (Ecuador), were used to train an ANN model capable of predicting six post-treatment water quality indicators, including turbidity, color, and pH. The ANN achieved excellent predictive accuracy (R² > 0.95 for turbidity and color), supporting its use as a surrogate model within a GA-based optimization scheme. The genetic algorithm evaluated dosage strategies by minimizing treatment costs while enforcing compliance with national water quality standards. The results revealed a bimodal dosing pattern, favoring low PAC dosages (~4 ppm) during routine conditions and higher dosages (~12 ppm) when influent quality declined. Optimization yielded a 49% reduction in median chemical costs and improved color compliance from 52% to 63%, while maintaining pH compliance above 97%. Turbidity remained a challenge under some conditions, indicating the potential benefit of complementary coagulants. The proposed ANN–GA approach offers a scalable and adaptive solution for enhancing chemical dosing efficiency in water treatment operations. Full article

Traditional coagulant calf rennet, which is used in cheese production, is currently facing the problem of an unsustainable source. In addition, the production of cheese with calf rennet produces whey with high biochemical (BOD) and chemical oxygen demand (COD) values. For these reasons, plant extracts have been investigated as sustainable sources of coagulants for milk. However, there are few reports on the changes in the COD and BOD of whey when plant extracts are used. For this reason, this study investigated the potential of extracts from two Hechtia species native to Mexico (H. glomerata and H. podantha) as sustainable milk coagulants for cheese production, with the aim of simultaneously reducing the pollutant load of residual whey. The milk coagulation efficiency of the extracts of the two Hechtia species was investigated, and in addition, their effects on cheese texture and color, and the composition of the residual whey, including BOD and COD, were evaluated. Most extracts of H. podantha showed adequate milk coagulation and yielded fresh cheese with textural properties comparable to those of cheese produced with conventional calf rennet. A significant reduction in carbohydrate content was achieved when H. podantha extracts were used. As a result, a significant decrease in the BOD and COD values was achieved. In some cases, a reduction of up to 1.78 times compared with those of the control was achieved. The results of this study show that H. podantha is a promising source of natural coagulants for sustainable cheese production, offering a dual benefit by providing an alternative to conventional rennet and reducing the environmental impact of whey. Full article

This study assessed the effect of ultrafiltration (UF) on the quality of soft white cheese made from goat skim milk (GSM) and aimed to identify the optimal UF parameters for protein concentration while minimizing energy consumption. UF was applied to pasteurized GSM by altering transmembrane pressure (TMP) and permeate flux density (J) while monitoring the volume reduction factor (VRF). The acidity, viscosity, dry extract, proteins and Ca, Na, K, Mg and Fe contents increased significantly during concentration. Post-ultrafiltration, both UF and non-UF GSMs were coagulated using modified rennet doses (150, 200 and 300 µL/L). The resulting cheeses underwent chemical analysis, yield calculation and textural property assessment. The findings highlighted that milk protein concentration was the primary limiting factor for coagulation, with rennet dose having a lesser impact. The UF-GSM produced the best results, yielding approximately 30% cheese with a soft texture and greater nutritional value (proteins, Ca, Mg and Fe). Full article

Occupational exposure to commercial formic and acetic acids through dermal contact and inhalation during rubber sheet processing poses significant health risks to workers. Additionally, the use of these acids contributes to environmental pollution by contaminating water sources and soil. This study investigates the potential of three types of wood vinegar—derived from para-rubber wood, bamboo, and eucalyptus—obtained through biomass pyrolysis under anaerobic conditions, as sustainable alternatives to formic and acetic acids in the production of ribbed smoked sheets (RSSs). The organic constituents of each wood vinegar were characterized using gas chromatography and subsequently mixed with fresh natural latex to produce coagulated rubber sheets. The physical and chemical properties, equilibrium moisture content, and drying kinetics of the resulting sheets were then evaluated. The results indicated that wood vinegar derived from para-rubber wood contained a higher concentration of acetic acid compared to that obtained from bamboo and eucalyptus. As a result, rubber sheets coagulated with para-rubber wood and bamboo vinegars exhibited moisture sorption isotherms comparable to those of sheets coagulated with acetic acid, best described by the modified Henderson model. In contrast, sheets coagulated with eucalyptus-derived vinegar and formic acid followed the Oswin model. In terms of physical and chemical properties, extended drying times led to improved tensile strength in all samples. No statistically significant differences in tensile strength were observed between the experimental and reference samples. The concentration of acid was found to influence Mooney viscosity, the plasticity retention index (PRI), the thermogravimetric curve, and the overall coagulation process more significantly than the acid type. The drying kinetics of all five rubber sheet samples displayed similar trends, with the drying time decreasing in response to increases in drying temperature and airflow velocity. Full article

Aquaculture effluents are a growing source of water pollution, releasing suspended solids, organic matter, nitrogen, and phosphorus into aquatic environments. Recirculating aquaculture systems (RASs) have emerged as a more sustainable solution, allowing water to be continuously treated and reused. Within RASs, coagulation–flocculation is a key treatment step due to its simplicity and effectiveness. Tannin-based coagulants have gained attention as natural alternatives to traditional chemical agents. Although natural coagulants have been studied in aquaculture, only a few works explore their use in continuous-flow systems. This study evaluates a chestnut shell-based (CS) coagulant applied in continuous mode for the post-treatment of aquaculture effluent. The performance of CS was compared with Tanfloc, aluminum sulfate, and ferric chloride in removing color and dissolved organic carbon (DOC). At natural pH (6.5) and 50 mg·L⁻¹, CS and Tanfloc achieved color removal of 61.0% and 65.5%, respectively, outperforming chemical coagulants. For DOC, Tanfloc and chemical coagulants removed 45–50%, while CS removed 32%. All coagulants removed over 90% of phosphorus, but nitrogen removal was limited (30–40%). These results highlight the potential of tannin-derived coagulants, particularly from agro-industrial residues, as sustainable solutions for aquaculture wastewater treatment in continuous systems. Full article

Label-free, high-throughput, and 3D morphological analysis of blood cells remains a major challenge in biomedical optics. In this study, we investigate this issue using flow cytometry with digital holographic microscopy (DHM) to enable real-time, label-free imaging of red blood cells (RBCs) and blood coagulation structures (BCSs) without the need for staining or chemical pretreatment. We demonstrate an approach for the automated quantification and statistical characterization of these cells using quantitative phase information reconstructed from digital holograms. Although established image processing techniques such as phase unwrapping and segmentation are used, this study presents, to the best of our knowledge, the first statistical characterization of the 3D morphological features of BCSs. This is particularly useful in analyzing the heterogeneous and complex 3D structures of BCSs, which are difficult to assess using conventional microscopy. The results suggest that this DHM-based flow cytometry system provides a promising platform for non-invasive, real-time morphological evaluation of blood samples and has potential applications in hematological diagnostics and research related to blood coagulation. Full article

This study evaluated the combined effect of a cationic coagulant (Magnafloc 1727^®) and a high molecular weight anionic flocculant (SNF 604^®) on the settling properties, aggregate structure, and rheological behavior of synthetic tailings suspensions composed of kaolinite and quartz in industrial water at pH 11. Settling tests, focused beam reflectance measurement (FBRM), zeta potential measurement, and rheological characterization were used to analyze the system’s performance under different coagulant dosages (0–150 g/t), while keeping the flocculant dosage constant (20 g/t). The results indicated that the coagulant favored surface charge neutralization, shifting the zeta potential from −13.2 mV to +4.0 mV. This resulted in larger, more efficient flocs capturing fines, with a 46% turbidity reduction. FBRM analysis revealed a significant increase in aggregate size and a slight decrease in fractal dimension (from 2.35 to 2.20), consistent with larger volume structures and lower bulk density. Rheologically, a substantial increase in yield stress was observed, especially in 50 wt% suspensions, suggesting the development of a continuous flocculated network with greater mechanical strength. These findings highlight the importance of sequential chemical conditioning in clayey tailings and its impact on clarification efficiency and water recovery under alkaline conditions representative of industrial mining processes. Full article

Natural coagulants have gained significant attention as effective agents for wastewater treatment, particularly in the removal of heavy metals. This study conducts a comprehensive bibliometric analysis of 268 publications over the past decade, aiming to assess research trends and developments in the application of natural coagulants in wastewater management. The analysis reveals a marked increase in publication output, with the number of articles rising from just five in 2015 to fifty-one in 2024, indicating a growing global awareness and investment in sustainable wastewater treatment practices. “Environmental science” emerges as the leading discipline, accounting for 31.3% of the total publications. Notably, Malaysia is identified as the foremost contributor, with 60 publications and 1149 citations, followed by India and Brazil, highlighting the robust research activity in these regions. The study identifies key natural coagulants, such as Moringa oleifera and chitosan, which are frequently cited for their efficacy in reducing heavy metal concentrations and improving overall water quality. Leading funding organizations, such as the Coordenação de Aperfeiçoamento de Pessoal de Nível Superior in Brazil, have significantly contributed to the growth of this field by financing numerous studies. Prominent journals, including the Journal of Environmental Chemical Engineering and Water Research, play a crucial role in disseminating research findings and advancing knowledge in this area. These publications are vital for sharing innovative methodologies and effective treatment solutions in the field of natural coagulants. Effective treatment methodologies identified in the literature include coagulation/flocculation and adsorption. The study highlights a variety of natural materials utilized for wastewater treatment, including plant-based coagulants derived from agricultural by-products, which not only address environmental concerns but also promote resource recovery. Full article

The environmental impacts of industrial processes have increased the demand for sustainable alternatives in wastewater treatment. Conventional chemical coagulants, though widely used, can generate toxic residues and pose environmental and health risks. Biocoagulants, derived from natural and renewable sources, offer a biodegradable and eco-friendly alternative. This review explores their potential to replace synthetic coagulants by analyzing their origins, mechanisms of action, and applications. A total of 15 studies published between 2020 and 2025 were analyzed, all focused on industrial wastewater. These studies demonstrated that biocoagulants can achieve similar, or the superior, removal of turbidity (>67%), solids (>83%), and heavy metals in effluents from food, textile, metallurgical, and paper industries. While raw materials are often inexpensive, processing costs may increase production expenses. However, life cycle assessments suggest long-term advantages due to reduced sludge and environmental impact. A textile industry case study showed a 25% sludge reduction and improved biodegradability using a plant-based biocoagulant compared to aluminum sulfate. Transforming this waste into inputs for wastewater treatment not only reduces negative impacts from disposal but also promotes integrated environmental management aligned with circular economy and cleaner production principles. The review concludes that biocoagulants constitute a viable and sustainable alternative for industrial wastewater treatment. Full article

Within the field of wastewater treatment, various treatment systems stand out, including those that use chemical reagents to promote a precipitation reaction. Among these chemical methods are electrochemical processes such as electrocoagulation systems, which have gained prominence due to their ease of operation and the cost-benefit associated with the accessibility of the coagulant material. This article aims to guide the implementation of the electrocoagulation process in various water remediation systems as an improvement option for any treatment train. Electrocoagulation is analyzed from the perspective of Electrochemical Engineering. Various essential aspects of electrocoagulation are addressed, including its definition, the types of reactions occurring within the reactor, hydrodynamics, the variables that need to be controlled and their influence on the process’s hydrodynamics, the factors to consider in the design of an electrocoagulation reactor, and some results obtained with this technique in the treatment of various wastewater and/or substrates. All of this is presented from a practical and easy-to-apply approach, providing a reference point for those interested in implementing this technology. Full article

Natural rubber is a widely used biological polymer material because of its excellent comprehensive performance. Nevertheless, the performance of domestic natural rubber cannot meet the requirements for high-end products such as aviation tires, which has become a constraint on the innovation and upgrading of high-end manufacturing enterprises and the enhancement of global competitiveness in China. To solve the bottleneck problem of natural rubber processing technology, this study systematically analyzed the effects of different varieties of fresh latex ratios on the processing and dynamic properties of bio-coagulated natural rubber. By mixing PR107 and Reyan72059 fresh latex with Reyan73397 fresh latex according to proportion, the fresh latex was coagulated by enzyme-assisted microbials, and the effects of the fresh latex ratio on physical and chemical indexes, molecular weight distribution, vulcanization characteristics, processing properties, cross-link density and physical and mechanical properties of the natural rubber were analyzed. The results showed that the aging resistance of natural rubber coagulated with enzyme-assisted microbial decreased, and the aging resistance of natural rubber increased with the increase in the mixing ratio of PR107 and Reyan72059 fresh latex. The proportion of high molecular weight of the natural rubber coagulated with the enzyme-assisted microbial increased, and the fresh latex mixing had little effect on the molecular weight distribution curve. Under the carbon black formulation, the CRI of the enzyme-assisted microbial coagulated natural rubber compound was relatively larger. Under the same strain conditions, the H-3 compound (PR107:Reyan72059:Reyan73397 = 1:1:3) had the best viscoelasticity and the least internal resistance of rubber molecules. In addition, the cross-link density, tensile strength, elongation at break, and tear strength of H-3 vulcanized rubber were the largest, improved by 23.08%, 5.32%, 12.45% and 3.70% compared with the same H-2 vulcanized rubber. In addition, the heat generation performance was reduced by 11.86%, and the wear resistance improved. Full article

In this study, we aimed to investigate the effects of coagulants and dissolved organic matter (DOM) on the biological toxicity of nano-zinc oxide (nZnO) to key microorganisms involved in biological phosphorus removal during sewage treatment. Polyaluminum chloride and polyferric chloride were selected as coagulants, whereas fulvic acid, glucose, and aspartic acid represented the DOM. The mechanisms through which these chemicals influence nZnO toxicity were also investigated. The results show that polyaluminum chloride and polyferric chloride effectively reduced nZnO toxicity in phosphorus-accumulating organisms, demonstrating their detoxification effects. Similarly, fulvic acid and glucose mitigated nZnO toxicity, whereas aspartic acid displayed dual effects: detoxification at low concentrations and enhanced toxicity at high concentrations. These findings highlight the dual role of sewage treatment additives in enhancing traditional pollutant removal and mitigating the nanoparticle-induced inhibition of microbial biochemical processes. This study clarified the interactions between coagulant chemicals, DOM, and nanoparticles in sewage treatment, offering insights into the regulatory mechanisms that improve treatment efficacy and reduce ecological risks. Full article

Phosphorus contamination in water bodies is a major contributor to eutrophication, leading to algal overgrowth, oxygen depletion, and ecological imbalance. Conventional treatment methods, including chemical precipitation and synthetic adsorbents, are often limited by high operational costs, low biodegradability, and secondary pollutant generation. In this study, a cationic starch was synthesized through free radical graft polymerization of 3-methacrylamoylaminopropyl trimethyl ammonium chloride (MAPTAC) onto corn starch. The modified polymer exhibited a high degree of substitution (DS = 1.24), indicating successful functionalization with quaternary ammonium groups. Theoretical calculations using zDensity Functional Theory (DFT) at the B3LYP/6-311+G(d,p) level revealed a decrease in chemical hardness (from 0.10442 eV to 0.04386 eV) and a lower ionization potential (from 0.24911 eV to 0.15611 eV) in the modified starch, indicating enhanced electronic reactivity. HOMO-LUMO analysis and molecular electrostatic potential (MEP) maps confirmed increased electron-accepting capacity and the formation of new electrophilic sites. Experimentally, the cationic starch showed stable zeta potential values averaging +15.3 mV across pH 5.0–10.0, outperforming aluminum sulfate (Alum), which reversed its charge above pH 7.5. In coagulation-flocculation trials, the modified starch achieved 87% total suspended solids (TSS) removal at a low coagulant-to-biomass ratio of 0.0601 (w/w) using Scenedesmus obliquus, and 78% TSS removal in real wastewater at a 1.5:1 ratio. Additionally, it removed 30% of total phosphorus (TP) under environmentally benign conditions, comparable to Alum but with lower chemical input. The integration of computational and experimental approaches demonstrates that MAPTAC-modified starch is an efficient, eco-friendly, and low-cost alternative for nutrient and solids removal in wastewater treatment. Full article

The wastewater treatment involves various techniques at different technological levels. Treatment takes place in several stages, of which coagulation and flocculation are the most important. Most suspended solids are indeed eliminated during this stage by the addition of a coagulant. In this research, bio-coagulant was extracted from pumpkin seed (PS) waste after extraction of the essential oils, and used with ferric chloride to treat wastewater from the plant of Chalghoum El Aid-Oued El Athmania Mila. In this study, the Box–Behnken design (BBD) with three factors was used to investigate the effect of pH, organic coagulant dosage Pumpkin seed extract (PSE), and chemical coagulant dosage (FeCl₃) on coagulation–flocculation performance in relation to turbidity, chemical oxygen demand (COD), aromatic organic matter (UV 254), and phosphate. The main characteristics of the raw water were turbidity (250 NTU), COD (640 mg/L), UV 254 (0.893 cm⁻¹), and phosphate (0.115 mg/L). The results obtained were very significant. All the statistical estimators (R² ≥ 97% and p ≤ 0.05) reveal that the models developed are statistically validated for simulating the coagulation–flocculation process. It should be noted that the residual values of turbidity, COD, UV 254, and phosphate after treatment by this process were 0.754 NTU; 190.88 mg/L; 0.0028 cm⁻¹; and 0.0149 mg/L, respectively. In this case, the pH, bio-coagulant dosage, and chemical coagulant dosage values were 4; 17.81 mL/L; and 10 mL/L, respectively. In this study, Fourier-transform infrared spectrometer (FTIR) and scanning electron microscope (SEM) characterization of the bio-coagulant proved the presence of the active functional groups responsible for coagulation, namely carboxyl group. Full article