Search Results (4,624)

MXenes, a rapidly emerging family of two-dimensional transition metal carbides and nitrides, have attracted considerable attention in recent years for their potential in next-generation energy storage technologies. In solid-state batteries (SSBs), they combine metallic-level conductivity (>10³ S cm⁻¹), adjustable surface terminations, and mechanical resilience, which makes them suitable for diverse functions within the cell architecture. Current studies have shown that MXene-based anodes can deliver reversible lithium storage with Coulombic efficiencies approaching ~98% over 500 cycles, while their use as conductive additives in cathodes significantly improves electron transport and rate capability. As interfacial layers or structural scaffolds, MXenes effectively buffer volume fluctuations and suppress lithium dendrite growth, contributing to extended cycle life. In solid polymer and composite electrolytes, MXene fillers have been reported to increase Li⁺ conductivity to the 10⁻³–10⁻² S cm⁻¹ range and enhance Li⁺ transference numbers (up to ~0.76), thereby improving both ionic transport and mechanical stability. Beyond established Ti-based systems, double transition metal MXenes (e.g., Mo₂TiC₂, Mo₂Ti₂C₃) and hybrid heterostructures offer expanded opportunities for tailoring interfacial chemistry and optimizing energy density. Despite these advances, large-scale deployment remains constrained by high synthesis costs (often exceeding USD 200–400 kg⁻¹ for Ti₃C₂T_x at lab scale), restacking effects, and stability concerns, highlighting the need for greener etching processes, robust quality control, and integration with existing gigafactory production lines. Addressing these challenges will be crucial for enabling MXene-based SSBs to transition from laboratory prototypes to commercially viable, safe, and high-performance energy storage systems. Beyond summarizing performance, this review elucidates the mechanistic roles of MXenes in SSBs—linking lithiophilicity, field homogenization, and interphase formation to dendrite suppression at Li|SSE interfaces, and termination-assisted salt dissociation, segmental-motion facilitation, and MWS polarization to enhanced electrolyte conductivity—thereby providing a clear design rationale for practical implementation. Full article

To address the challenge of coordinating economic cost control and low-carbon objectives in microgrid scheduling, while overcoming the performance limitations of the traditional Zebra Optimization Algorithm (ZOA) in complex problems, this paper proposes a Synergistic Zebra Optimization Algorithm (SZOA) and integrates it with innovative management concepts to enhance the microgrid scheduling process. The SZOA incorporates three core strategies: a multi-population cooperative search mechanism to strengthen global exploration, a vertical crossover–mutation strategy to meet high-dimensional scheduling requirements, and a leader-guided boundary control strategy to ensure variable feasibility. These strategies not only improve algorithmic performance but also provide technical support for innovative management in microgrid scheduling. Extensive experiments on the CEC2017 (d = 30) and CEC2022 (d = 10, 20) benchmark sets demonstrate that the SZOA achieves higher optimization accuracy and stability compared with those of nine state-of-the-art algorithms, including IAGWO and EWOA. Friedman tests further confirm its superiority, with the best average rankings of 1.20 for CEC2017 and 1.08/1.25 for CEC2022 (d = 10, 20). To validate practical applicability, the SZOA is applied to grid-connected microgrid scheduling, where the system model integrates renewable energy sources such as photovoltaic (PV) generation and wind turbines (WT); controllable sources including fuel cells (FC), microturbines (MT), and gas engines (GS); a battery (BT) storage unit; and the main grid. The optimization problem is formulated as a bi-objective model minimizing both economic costs—including fuel, operation, pollutant treatment, main-grid interactions, and imbalance penalties—and carbon emissions, subject to constraints on generation limits and storage state-of-charge safety ranges. Simulation results based on typical daily data from Guangdong, China, show that the optimized microgrid achieves a minimum operating cost of USD 5165.96, an average cost of USD 6853.07, and a standard deviation of only USD 448.53, consistently outperforming all comparison algorithms across economic indicators. Meanwhile, the SZOA dynamically coordinates power outputs: during the daytime, it maximizes PV utilization (with peak output near 35 kW) and WT contribution (30–40 kW), while reducing reliance on fossil-based units such as FC and MT; at night, BT discharges (−20 to −30 kW) to cover load deficits, thereby lowering fossil fuel consumption and pollutant emissions. Overall, the SZOA effectively realizes the synergy of “economic efficiency and low-carbon operation”, offering a reliable and practical technical solution for innovative management and sustainable operation of microgrid scheduling. Full article

In the shift toward sustainable energy, there is a strong demand for efficient and durable energy storage solutions. Supercapacitors, in particular, are a promising technology, but they require high-performance materials that can be produced using simple, eco-friendly methods. This has led researchers to investigate new materials and composites that can deliver high energy and power densities, along with long-term stability. Herein, we report a green synthesis approach to create a composite material consisting of reduced graphene oxide and silver nanoparticles (rGO/Ag). The method uses ascorbic acid, a natural compound found in fruits and vegetables, as a non-toxic agent to simultaneously reduce graphene oxide and silver nitrate. To enhance electrochemical performance, the incorporation of silver nanoparticles into the rGO structures is optimized. In this study, different molar concentrations of silver nitrate (1.0, 0.10, and 0.01 M) are used to control silver nanoparticle loading during the synthesis and reduction process. A correlation between silver concentration, defect density in rGO, and the resulting capacitive behavior was assessed by systematically varying the silver molarity. The synthesized materials exhibited excellent performance as supercapacitor electrodes in a three-electrode configuration, with the rGO/Ag 1.0 M composite showing the best performance, reaching a maximum specific capacitance of 392 Fg⁻¹ at 5 mVs⁻¹. Furthermore, the performance of this optimized electrode material was investigated in a two-electrode configuration as a coin cell device, which demonstrates a maximum areal-specific capacitance of 22.63 mFcm⁻² and a gravimetric capacitance of 19.00 Fg⁻¹, which is within the range of commercially viable devices and a significant enhancement, outperforming low-level graphene-based devices. Full article

During prolonged storage of garlic scapes (Allium sativum L.), the proliferation of microorganisms, particularly fungi, frequently results in postharvest rot, which negatively impacts both product quality and market value. Carvacrol, a promising natural food preservative, exhibits broad-spectrum bioactivity against various microorganisms. In this study, a specific pathogenic fungal strain causing postharvest rot in garlic scapes, designated as HQ, was initially isolated from symptomatic garlic scapes. Based on a combination of physiological characteristics and molecular identification techniques, the HQ strain was identified as Aspergillus niger. Our findings further demonstrated that carvacrol exhibits significant in vitro inhibitory effects against Aspergillus niger with an EC₅₀ value of 75.99 μg/L. Moreover, scanning electron microscopy (SEM) observations revealed that carvacrol induces irreversible morphological and structural changes in the hyphae, resulting in deformation and rupture. Additionally, integrated transcriptomic and proteomic analyses indicated that carvacrol primarily targets the cell wall integrity (CWI) signaling pathway within the mitogen-activated protein kinase (MAPK) signaling pathway in Aspergillus niger, thereby compromising cell membrane integrity and stability, which ultimately suppresses fungal growth and proliferation. Full article

Insular regions face unique energy management challenges due to physical isolation. Graciosa (Azores) has high renewable energy sources (RES) potential, theoretically enabling a 100% green system. However, RES intermittency combined with the lack of energy storage solutions reduces renewable penetration and raises curtailment. This article studies the technical and economic feasibility of producing green hydrogen from curtailment energy in Graciosa through two distinct case studies. Case Study 1 targets maximum renewable penetration with green hydrogen serving as chemical storage, converted back to electricity via fuel cells during RES shortages. Case Study 2 focuses on maximum profitability, where produced gases are sold to monetize curtailment, without additional electricity production. Levelized Cost of Hydrogen (LCOH) values of €3.06/kgH₂ and €2.68/kgH₂, respectively, and Internal Rate of Return (IRR) values of 3.7% and 17.1% were obtained for Case Studies 1 and 2, with payback periods of 15.2 and 6.1 years. Hence, only Case Study 2 is economically viable, but it does not allow increasing the renewable share in the energy mix. Sensitivity analysis for Case Study 1 shows that overall efficiency and CAPEX are the main factors affecting viability, highlighting the need for technological advances and economies of scale, as well as the importance of public funding to promote projects like this. Full article

Plant microbial fuel cells (PMFCs) represent an eco-friendly solution for generating clean energy by converting biological processes into electricity. This work presents the first integration of tin sulfide (SnS)-coated 304 stainless steel (SS304) electrodes into Aloe vera-based PMFCs for enhanced energy harvesting. SnS thin films were obtained via chemical bath deposition and screen printing, followed by thermal treatment. X-ray diffraction (XRD) revealed a crystal size of 15 nm, while scanning electron microscopy (SEM) confirmed film thicknesses ranging from 3 to 13.75 µm. Over a 17-week period, SnS-coated SS304 electrodes demonstrated stable performance, with open circuit voltages of 0.6–0.7 V and current densities between 30 and 92 mA/m², significantly improving power generation compared to uncoated electrodes. Polarization analysis indicated an internal resistance of 150 Ω and a power output of 5.8 mW/m². Notably, the system successfully charged a 15 F supercapacitor with 8.8 J of stored energy, demonstrating a practical proof-of-concept for powering low-power IoT devices and advancing PMFC applications beyond power generation. Microbial biofilm formation, observed via SEM, contributed to enhanced electron transfer and system stability. These findings highlight the potential of PMFCs as a scalable, cost-effective, and sustainable energy solution suitable for industrial and commercial applications, contributing to the transition toward greener energy systems. These incremental advances demonstrate the potential of combining low-cost electrode materials and energy storage systems for future scalable and sustainable bioenergy solutions. Full article

This study introduces an efficient, all-aqueous emulsion-templating strategy for fabricating highly tunable yeast immobilization carriers with superior biocatalytic performance. Utilizing cellulose nanocrystals (CNCs) to stabilize dextran/polyethylene glycol (Dex/PEG) water-in-water emulsions, an architecture-controlled void is obtained by crosslinking the PEG-rich phase with variable concentrations of polyethylene glycol diacrylate (PEGDA) (10–25 wt%). This approach successfully yielded macroporous networks, enabling precise tuning of void diameters from 10.4 to 6.6 μm and interconnected pores from 2.2 to 1.4 μm. The optimally designed carrier, synthesized with 15 wt% PEGDA, featured 9.6 μm voids and robust mechanical strength (0.82 MPa), and facilitated highly efficient yeast encapsulation (~100%). The immobilized yeast demonstrated exceptional fermentation activity, remarkable storage stability (maintaining > 95% productivity after 4 weeks), and high reusability (85% activity retention after seven cycles). These enhancements are attributed to the material’s excellent water retention capacity and the provision of a stable microenvironment. This green and straightforward method represents a significant advance in industrial cell immobilization, offering unparalleled operational stability, protection, and design flexibility. Full article

During the grain and cereal production process, whether during harvesting, processing, or storage, errors can occur, compromising product quality and potentially leading to contamination by fungi, which produce toxic substances known as mycotoxins. When fed to animals, these contaminated grains and cereals can cause several negative effects on animal health, impacting their production performance, including immunosuppression, hepatotoxicity, nephrotoxicity, and reproductive problems. To minimize the problems caused by mycotoxins, anti-mycotoxin additives, also known as adsorbents, are used. These are inert materials that bind to mycotoxins and are excreted in feces, preventing their action within the animal’s body. Therefore, the objective of this study was to evaluate the effectiveness of an anti-mycotoxin product based on bentonite, activated charcoal, milk thistle extract, and yeast cell wall in the diet of mycotoxin-contaminated lambs on animal health and performance. Thirty lambs were divided into three homogeneous groups: control (without mycotoxins or additives), mycotoxin (with mycotoxins), and anti-mycotoxin (mycotoxins and additive). The mycotoxins used for feed contamination were aflatoxin (AFLA) (200 ppb), fumonisin (FUMO) (15 ppm), zearalenone (ZEA) (500 ppb), and deoxynivalenol (DON) (1.5 ppm). The anti-mycotoxin additive was used at a dose of 1 kg/ton of concentrate. Parameters of zootechnical performance, hematological profile, serum biochemistry, and oxidative status were evaluated. The group that ingested the contaminated concentrate with mycotoxin had a lower average daily weight gain (ADG) when compared to the control and anti-mycotoxin groups. Ingestion of a mycotoxin-contaminated diet increased the activity of aspartate aminotransferase and gamma-glutamyltransferase, which are indicators of liver damage. However, when the anti-mycotoxin additive was used, the increase in these enzymes was modest and lower than in the mycotoxin group. Ingestion of a mycotoxin-containing concentrate increased levels of oxidative stress biomarkers such as reactive oxygen species (ROS), thiobarbituric acid reactive substances (TBARS), myeloperoxidase (MPO), and reduced glutathione (GST), demonstrating that the mycotoxin challenge was effective in causing oxidative stress. However, when the diet was contaminated with mycotoxins and supplemented with the anti-mycotoxin additive, the levels of ROS and TBARS were similar to those of the negative control group. We concluded that adding the anti-mycotoxin product to the lambs’ diets prevented or minimized the problems caused by mycotoxin consumption, allowing these lambs to have ADG, and feed efficiency similar to the control group. Full article

The aim of this paper is to present a novel and comprehensive methodology for the dynamic modeling and experimental validation of a photovoltaic/thermal system. The dynamic model is divided into thermal and electrical subsystems, encompassing the photovoltaic/thermal module and the thermal energy storage. The thermal subsystem of both the photovoltaic/thermal module and the thermal energy storage is described by a one-dimensional dynamic model of heat transfer mechanisms and optical losses, while the electrical subsystem is presented as an electrical equivalent circuit of double diode solar cell. Model validation was conducted on a modern experimental photovoltaic/thermal system over an extended operational period at a five-minute resolution, with validation days classified as sunny, cloudy, or overcast based on weather conditions, thereby demonstrating an applied approach. The results demonstrate the lowest deviation values reported to date, confirmed using six quantitative indicators. The added value of the proposed methodology, not previously addressed in the literature, lies in the following contributions: (i) comprehensive modeling of the entire photovoltaic/thermal system, (ii) accurate consideration of optical losses in the photovoltaic/thermal module, and (iii) long-term experimental validation. Overall, the proposed methodology provides a reliable and efficient framework for PV/T system design, optimization, and long-term performance assessment. Full article

Fish-derived collagen can reduce the risk of disease transmission and has no religious or cultural restrictions. However, it has limited applications due to its poor thermal stability. In this study, black carp swim bladder collagen (BBC), classified as a type I collagen, was extracted. Amino acid composition analysis revealed that BBC had a higher proline hydroxylation rate of 39.57%. Fourier transform infrared spectroscopy revealed that BBC exhibited a complete triple-helix structure. The fractional viscosity curve and differential scanning calorimetry curves revealed that the thermal denaturation temperature (Td) and the melting temperature (Tm) were 30.85 °C and 107.19 °C, respectively. The dynamic rheological analysis showed that as the concentration increased from 5 mg/mL to 20 mg/mL at 0.01 Hz, the storage modulus increased from 0.979 Pa to 84.2 Pa. When the temperature exceeded the Td, the BBC solution exhibited viscous behaviour as the frequency increased. The steady-shear analysis showed that the BBC was a shear-thinning fluid. Functional properties analysis revealed that BBC exhibited better emulsification properties, foaming properties, water absorption capacity and oil absorption capacity than land-derived collagen, making it suitable for emulsifiers, bubbling beverages, and frozen meat preservation. Additionally, BBC promoted the growth of MT3C3-E1 cells and maintained the normal morphology of the cells. These results showed that BBC is a promising substitute for terrestrial collagen in functional foods, cosmetics, and biofunctional materials. Full article

Aqueous zinc-ion batteries (AZIBs) have attracted significant attention for large-scale energy storage owing to their high safety, low cost, and environmental friendliness. However, issues such as dendrite growth, hydrogen evolution, and corrosion at the zinc anode severely limit their cycling stability. In this study, a “synergistic solvation shell–interfacial adsorption regulation” strategy is proposed, employing potassium gluconate (KG) and dimethyl sulfoxide (DMSO) as composite additives to achieve highly reversible zinc anodes. DMSO integrates into the Zn²⁺ solvation shell, weakening Zn²⁺-H₂O interactions and suppressing the activity of free water, while gluconate anions preferentially adsorb onto the zinc anode surface, inducing the formation of a robust solid electrolyte interphase (SEI) enriched in Zn(OH)₂ and ZnCO₃. Nuclear magnetic resonance(NMR), Raman, and Fourier transform infrared spectroscopy(FTIR) analyses confirm the reconstruction of the solvation structure and reduction in water activity, and X-ray photoelectron spectroscopy(XPS) verifies the formation of the SEI layer. Benefiting from this strategy, Zn||Zn symmetric cells exhibit stable cycling for over 1800 h at 1 mA cm⁻² and 1 mAh cm⁻², and Zn||Cu cells achieve an average coulombic efficiency of 96.39%, along with pronounced suppression of the hydrogen evolution reaction. This work provides a new paradigm for the design of low-cost and high-performance electrolyte additives. Full article

The integration of multiple renewable and storage units in electric vehicle (EV) hybrid energy systems presents significant challenges in stability, dynamic response, and disturbance rejection, limitations often encountered with conventional sliding mode control (SMC) and super-twisting SMC (STSMC) schemes. This paper proposes a condition-based integral terminal super-twisting sliding mode control (CBITSTSMC) strategy, with gains optimally tuned using an improved gray wolf optimization (I-GWO) algorithm, for coordinated control of a multi-source DC–DC converter system comprising photovoltaic (PV) arrays, fuel cells (FCs), lithium-ion batteries, and supercapacitors. The CBITSTSMC ensures finite-time convergence, reduces chattering, and dynamically adapts to operating conditions, thereby achieving superior performance. Compared to SMC and STSMC, the proposed controller delivers substantial reductions in steady-state error, overshoot, and undershoot, while improving rise time and settling time by up to 50%. Transient stability and disturbance rejection are significantly enhanced across all subsystems. Controller-in-the-loop (CIL) validation on a Delfino C2000 platform confirms the real-time feasibility and robustness of the approach. These results establish the CBITSTSMC as a highly effective solution for next-generation EV hybrid energy management systems, enabling precise power-sharing, improved stability, and enhanced renewable energy utilization. Full article

The greater wax moth Galleria mellonella (Lepidoptera: Galleriinae) represents a ubiquitous apicultural pest that poses significant threats to global beekeeping industries. The larvae damage honeybee colonies by consuming wax combs and tunneling through brood frames, consequently destroying critical hive infrastructure including brood-rearing areas, honey storage cells, and pollen reserves. Larval feeding behavior is critically dependent on chemosensory input for host recognition and food selection. In this study, we conducted a transcriptome analysis of larval heads and bodies in G. mellonella. We identified a total of 25 chemosensory genes: 9 odorant binding proteins (OBPs), 1 chemosensory protein (CSP), 5 odorant receptors (ORs), 4 gustatory receptors (GRs), 4 ionotropic receptors (IRs) and 2 sensory neuron membrane proteins (SNMPs). TPM normalization was employed to assess differential expression patterns of chemosensory genes between heads and bodies. Nine putative chemosensory genes were detected as differentially expressed, suggesting their potential functional roles. Subsequently, we quantified expression dynamics via reverse transcription quantitative PCR in major chemosensory tissues (larval heads, adult male and female antennae), revealing adult antennal-biased expression for most chemosensory genes in G. mellonella. Notably, two novel candidates (GmelOBP22 and GmelSNMP3) exhibited particularly high expression in larval heads, suggesting their crucial functional roles in larval development and survival. These findings enhance our understanding of the chemosensory mechanisms in G. mellonella larvae and establish a critical foundation for future functional investigations into its olfactory mechanisms. Full article

Lithium iron phosphate (LFP) batteries have become a popular choice for energy storage, electrified mobility, and plants. All lithium-based batteries produce flammable vent gas as a result of failure through thermal runaway. LFP cells produce less gas by volume than nickel-based cells, but the composition of this gas most often contains less carbon dioxide and more hydrogen. However, when LFP cells fail, they generate lower temperatures, so the vent gas is rarely ignited. Therefore, the hazard presented by a LFP cell in thermal runaway is less of a direct battery fire hazard but more of a flammable gas source hazard. This research identified the constituents and components of the vent gas for different sized LFP prismatic cells when overcharged to failure. This data was used to calculate the maximum homogenous concentration of gas that would be released into a 1.73 m³ test rig and the percentage of the lower explosive limit (LEL). Overcharge experiments were conducted using the same type of cells in the test rig in the presence of remote ignition sources. Ignition and deflagration of the vent gas were possible at concentrations below the theoretical LEL of the vent gas if it was homogeneously mixed. Full article

The carbon emission reduction mission requires a multifaceted approach, in which green hydrogen is expected to play a key role. The accelerated adoption of green hydrogen technologies is vital to this journey towards carbon neutrality by 2050. However, the energy transition involving green hydrogen requires a data-driven approach to ensure that the benefits are realised. The introduction of testing sites for green hydrogen technologies will be crucial in enabling the performance testing of various components within the green hydrogen value chain. This study involves an areal assessment of a selected test site for the installation of a grid-tied solar PV-green hydrogen-battery storage microgrid system at a factory facility in South Africa. The evaluation includes a site energy audit to determine the consumption profile and an analysis of the location’s weather pattern to assess its impact on the envisaged microgrid. Lastly, a design of the microgrid is conceptualised. A 39 kW photovoltaic system powers the microgrid, which comprises a 22 kWh battery storage system, 10 kW of electrolyser capacity, an 8 kW fuel cell, and an 800 L hydrogen storage capacity between 30 and 40 bars. Full article