Search Results (61)

Primary teeth play a crucial role in a child’s development, particularly in maintaining space for permanent teeth. The premature loss of a primary tooth can lead to orthodontic issues, making the use of space maintainers essential to ensure proper growth and development of permanent teeth. To preserve space, the fabrication of a space maintainer is necessary. Since conventional space maintainers do not restore masticatory function, this study presents an innovative solution for space preservation following the extraction of the first primary molar through the design of the functional space maintainer KOS&MET (Key Orthodontic System and Materials Enhanced Therapy). The space maintainer was designed using the 3Shape Dental Designer 2023 version software tool and manufactured via additive 3D printing, utilizing a metal alloy with high resistance to masticatory forces. The crown is supported by the primary canine, while an intraoral window is created to monitor the eruption of the successor tooth. This design does not interfere with occlusion and enables bilateral chewing. Masticatory performance was assessed using two-color chewing gum, and the results showed improvement after cementing the space maintainer. This innovative approach not only preserves space for permanent teeth but also enhances masticatory function, contributing to the proper growth and development of the jaws and teeth. Full article

Background: Distalization is a fundamental orthodontic strategy for correcting Class II and Class III malocclusions, particularly in cases where specific dental or skeletal conditions favor its application. Recent technological advances have enabled complex dental movements to be performed using clear aligners, aided by digital planning platforms such as ClinCheck^®. Methods: This retrospective study aimed to evaluate the accuracy of ClinCheck^® in predicting molar and canine distalization outcomes with the Invisalign^® system and to identify clinical factors influencing treatment predictability. Thirty patients with complete permanent dentition and at least 2 mm of programmed distalization were selected. Planned movements were extracted from the Invisalign^® Doctor Site and compared to achieved outcomes using Geomagic^® Control X™ software. Occlusal improvements were assessed using the Peer Assessment Rating (PAR) index. Results: The results revealed significant discrepancies between the programmed and achieved distalization, with mean deviations greater than 1 mm in both arches. Skeletal anchorage with mini-screws significantly improved distalization outcomes in the maxillary arch; however, no significant effect was observed in the mandibular arch. Additionally, no significant associations were found between distalization outcomes and skeletal pattern (ANB angle) or facial biotype. Conclusions: Clear aligners are effective in achieving substantial occlusal improvements, particularly when combined with personalized digital planning and supplementary strategies such as skeletal anchorage. Mandibular cases demonstrated greater reductions in PAR scores, emphasizing the potential of aligners in complex distalization treatments. Full article

Objectives: This retrospective study evaluated the short-term effects of removable slow maxillary expansion (SME) on eruption patterns of labially ectopic canines in a Chinese pediatric population, comparing treated patients with untreated controls. Methods: Seventy-six patients (mean age 8.38 ± 0.88 years) underwent SME treatment for 11.04 ± 4.44 months. Canine positions were categorized as labial ectopic (TE: n = 40) or normally positioned (TN: n = 112). The TE group was stratified vertically: superior (TES; n = 15, canines above lateral incisors’ roots or adjacent to unerupted incisors) and inferior (TEI; n = 25, canines adjacent to erupted lateral incisors’ roots). Untreated controls (n = 58; mean age 8.46 ± 0.78 years) included labial ectopic (CE group; n = 32) and normal canines (CN group; n = 84), with CE further divided vertically into CES (n = 24) and CEI (n = 8). Panoramic radiographs at baseline (T0) and follow-up (T1) evaluated sector distribution, midline proximity (3c-ML: canine cusp to midline distance), vertical position (3c-OP: cusp to occlusal plane distance), and angular (3^ML: canine-midline angle). Results: SME significantly improved midline proximity (3c-ML increased) while reducing vertical height (3c-OP decreased) and angulation (3^ML reduced) in the TE group. Notably, TE patients revealed a significantly greater increase in 3c-ML compared to CE. Subgroup analysis showed that TEI canines exhibited significant improvements in all three parameters (3c-OP, 3c-ML, and 3^ML), whereas TES canines displayed minimal changes. The shifts in sector distribution were similar between the treatment and control groups. Conclusions: SME demonstrated short-term efficacy in guiding labially ectopic canines toward more favorable eruption trajectories, particularly when erupted beyond the roots of the lateral incisor. The observed positional improvements underscore SME’s potential to optimize eruption outcomes during early orthodontic intervention. Full article

Background: Impacted canines can adversely affect adjacent structures, particularly lateral incisors. The purpose was to determine the correlation between upper lateral incisor dimension and angular and linear positioning of upper impacted canines. Methods: The sample comprised 50 impacted canines, evaluated using cone-beam computed tomography (CBCT). Measurements included crown dimensions of lateral incisors and impacted canines, incisor root length, and the distance from the canine cusp to the occlusal plane. Angular positions of the canine were measured relative to the occlusal plane, facial midline, and palatine suture. Pearson correlations tested associations between canine position, lateral incisor dimensions, and maxillary transverse width. Results: Significant morphological differences for impacted canines and lateral incisors were found based on canine position and impaction type (unilateral or bilateral). A positive correlation was observed between lateral incisor crown size and canine cusp distance to the occlusal plane (r = +0.483, p < 0.001). Conversely, a negative correlation was noted between lateral incisor root length and canine angulation relative to the palatal suture (r = −0.356, p = 0.022). Conclusions: Impacted canine position is associated with changes in canine and lateral incisor dimensions, potentially affecting their alignment and root integrity. Correlations were also found between maxillary width, incisor morphology, and canine position. Full article

Objectives: The aim was to establish whether there is a relationship between the presence of unilateral posterior crossbite (u-PCB) and the mesio-distal inclination of permanent upper canines, the angulation of the occlusal plane, or the labial commissure inclination in children. Methods: A cross-sectional association study was conducted. Panoramic radiography was used to measure the inclination of the canines and the occlusal plane, and frontal rest photography was used to measure the inclination of the labial commissure. The measurements were performed with tpsDig264 software version 2.25, 2016, Ecology & Evolution, SUNY), and the data obtained were analyzed with SPSS 22.0 software, using ANOVA and Kruskal–Wallis tests for the statistical analysis. Results: A total of 106 patients with u-PCB and 41 patients in the control group were studied. No statistically significant differences were observed in the inclination of the right and left canines in patients with u-PCB compared to patients in the control group. There is a relationship between the presence of u-PCB and the inclination of the occlusal plane. No statistically significant differences were observed in the inclination of the labial commissure in patients with u-PCB compared to patients in the control group. Conclusions: There is no relationship between the presence of u-PCB and the alteration in the eruptive trajectory of the permanent upper canines or in the inclination of the labial commissure. However, a relationship between the presence of u-PCB and altered occlusal plane inclination was found. Full article

Background: Cemento-ossifying fibroma (COF) is a benign, non-aggressive fibro-osseous tumor in which normal bone is replaced by fibrous tissue containing collagen fibers, bone, or cementum-like material. Although COF is rare in children, its occurrence requires careful management due to its potential impact on tooth development and occlusion. Surgical excision is the widely used treatment; however, post-operative occlusal guidance is crucial, particularly in pediatric patients. Case report: This case report presents the early intervention using a preformed eruption guidance appliance (EGA) following the excision of COF in a 5-year-old boy. The patient exhibited premature loss of the primary canine and displacement of the devel-oping permanent tooth bud. After surgical excision, an EGA was applied to facilitate proper eruption of the successor teeth and optimize oral muscle function. Over a four-year follow-up period, the permanent teeth in the affected area erupted favorably, and intercuspal relationships improved during the transition from primary to mixed dentition. Conclusions: Given the limited research on the long-term effects of COF on developing dentition, long-term follow-up and additional studies are necessary to further evaluate its impact and the effectiveness of eruption guidance appliances in pediatric patients. Full article

Background/Objectives: Delayed tooth eruption (DTE) is a very challenging clinical situation, and the pathogenesis has been associated with local, systemic, and genetic factors. The aim of this presentation is to describe the management of such a case with delayed eruption of mandibular central incisors and canines. Methods: An 11-year-old female patient presented with DTE involving lower incisors (32, 42) and canines, seeking orthodontic treatment. Furthermore, lower permanent central incisors were congenitally missing while lower deciduous incisors were still in place. After a year-and-a-half of just monitoring the case and having suggested the extraction of deciduous first molars and canines, orthodontic treatment started with fixed appliances in the upper and lower jaw. First and second premolars gradually erupted after the precursor’s extraction. Lower canines and the two existing incisors were, after several months, surgically exposed and a gold chain apparatus was bonded on each one, while the closed eruption technique was chosen. A 0.17 × 0.25 stainless steel (SS) lingual wire, leaning on the buccal tubes of the lower molar bands and properly manipulated around them, was fitted in conjunction with the labial brackets and wires in order to facilitate the traction of the impacted teeth, which was carried out for one after the other using either an elastic chain or a second super-elastic wire. Results: All impacted teeth were finally restored to their proper place. The root of 71 did not present resorption, so the tooth was maintained in the lower arch while inter-proximal reduction was performed in the upper arch in the anterior region, in order to anticipate the lower missing incisor. Finally, a stable occlusion with proper contacts was achieved. Conclusions: Proper diagnosis, on-time extractions of deciduous teeth, and a well-designed treatment plan regarding space management and orthodontic traction of impacted teeth contributed to successful treatment outcomes in this DTE case. Full article

The maxillary canine is the second most commonly impacted tooth after the maxillary third molar. Identifying risk factors for impaction is crucial for timely intervention; panoramic radiographs are particularly valuable for screening and identification purposes. This study aims to explore the association between transverse maxillary deficiency with bilateral crossbite, and the risk of maxillary canine impaction. A cross-sectional retrospective study was conducted on records of pediatric patients (7–13 years old) undergoing orthodontic evaluations. Panoramic radiographs were analyzed to assess the risk of canine impaction using the sectorial method, distance from the occlusal plane, and the alpha angle. Results from 48 canines of patients with transverse maxillary deficiency and bilateral crossbite were compared to canines of sex- and age-matched patients without these malocclusions. Statistical analysis was performed by the Shapiro–Wilk test, Levene’s test, or a t-test. There were no significant differences in high-risk canine impaction between groups when considering sector classification or distance from the occlusal plane. However, the control group showed a significantly higher risk according to the alpha angle (≥25°). No overall significant difference in risk was observed, suggesting that transverse maxillary deficiency with bilateral crossbite may not increase the risk of maxillary canine impaction. Full article

Background: This study evaluated the number of aligners that Invisalign ClinCheck™ Pro Software estimates for correcting different malocclusion traits. Methods: This retrospective study included 157 non-extraction patients over the age of 12 years old with easy to mild malocclusions who were treated with Invisalign aligners. The Index of Complexity, Outcome, and Need (ICON) was used to evaluate the malocclusion complexity level. The number of aligners (upper, lower, and total) required to correct the malocclusion was compared based on sex, ICON level, molar and canine class, occlusal asymmetry, overbite, overjet, crowding, incisor inclination, and Bolton discrepancy. A Mann–Whitney U test (for comparisons between two groups) or a Kruskal–Wallis test (for comparisons between three or more groups) (p < 0.05) was used to evaluate differences in the number of aligners across variable categories. Results: ICON, molar class, overbite, and overjet presented significant differences (p < 0.05) in the number of aligners (upper, lower, and total) required to correct a malocclusion. Canine class and lower dental crowding showed significant differences in the lower and total number of aligners (p < 0.05). Conclusions: The number of aligners increases when the malocclusion presents any of the following elements: the absence of molar or canine class I, an altered overjet or overbite, severe lower crowding, or a higher complexity level. The clinician should consider these malocclusion traits when estimating the number of aligners needed for correction. Full article

Background: As the functional and aesthetical importance of the canine cannot be overstated, the management of a missing canine is challenging. This case report describes the treatment of an infra-occluded ankylosed maxillary canine in a patient with previously failed orthodontic treatment. Case description: A 20-year-old patient sought a second opinion for orthodontic treatment failure. The patient presented with an impacted, ankylosed, and severely infra-occluded right maxillary canine, as well as an iatrogenic clockwise cant of the maxillary occlusal plane and several root resorptions. The treatment corrected the cant of the occlusal plane while avoiding further root resorption, partially extracted the upper right canine, improved the quality and quantity of the soft tissue in the newly edentulous area, and provided a prosthetic rehabilitation using a lithium disilicate ceramic resin-bonded cantilever bridge. Conclusions: The use of a cantilevered bridge resulted in an aesthetically pleasing and minimally invasive rehabilitation. This technique is reversible, does not affect pulp vitality, and is a viable solution for rehabilitating the smiles of young patients. Clinical significance: The smile rehabilitation for an ankylosed maxillary canine, especially in the case of a previously failed orthodontic treatment, is an important clinical challenge. A minimally invasive long-term restoration with a cantilever bridge is a viable solution. Functional and aesthetically pleasant results can be achieved with a multidisciplinary approach. Full article

Background/Objectives: Many older adults living in long-term care (LTC) environments have varying numbers of retained natural teeth. The objective of this study was to assess the disease findings based on tooth type and estimate the role of tooth types in occlusion. Methods: We conducted clinical oral examinations of 276 LTC residents. The disease findings were analyzed for each tooth type and to determine their associations with dementia. Results: In total, 67.8% of the participants had molar teeth. Premolars/canines were often present as residual roots and had caries. Deepened periodontal pockets and higher plaque index (PI) values for molars had odds ratios of 2.5 (95% confidence interval [CI] of 1.59–3.91) and 1.61 (95% CI of 1.29–2.02), respectively. Participants with dementia were more likely to have incisors and premolars/canines in the form of root remnants and higher PI scores for all tooth types (p ≤ 0.01), as well as more deepened periodontal pockets in all teeth (p = 0.029), than those without dementia. The median number of remaining molars per participant was 3 out of a maximum of 12 (95% CI 3.4–4.0); thus, they often lacked occlusal contact. Conclusions: The LTC residents’ molars were more prone to periodontal problems, whereas their premolars/canines often had caries or were present in the form of root remnants, especially in the participants with dementia. People’s teeth should be treated in an easy-to-maintain way before they move into LTC to enable daily oral hygiene measures and maintain oral health. Full article

Background: We investigated treatment outcomes and post-treatment stability in 10 patients with an anterior open bite and nonsurgical orthodontics. Methods: The patients underwent maxillary molar intrusion using temporary anchorage devices (TADs) to deepen the overbite due to mandibular autorotation. Lateral cephalograms and dental cast models were obtained before treatment (T0), immediately after it (T1), and >1 year after it (T2). Skeletal and dental cephalometric changes and three-dimensional movements of the maxillary dentitions were evaluated. Results: At T0, cephalometric analysis indicated that patients had skeletal class I with tendencies for a class II jaw relationship and a skeletal open bite. During active treatment (T0 to T1), the maxillary first molar intruded by 1.6 mm, the mandibular first molar extruded by 0.3 mm, the Frankfort-mandibular plane angle decreased by 1.1°, and the overbite increased by 4.1 mm. Statistically significant changes were observed in the amount of vertical movement of the maxillary first molar, Frankfort-mandibular plane angle, and overbite. Three-dimensional (3D) dental cast analysis revealed that the maxillary first and second molars intruded, whereas the anterior teeth extruded, with the second premolar as an infection point. In addition, the maxillary molar was tipped distally by 2.9° and rotated distally by 0.91°. Statistically significant changes were observed in the amount of vertical movement of the central incisor, lateral incisor, canine and first molar, and molar angulation. From T1 to T2, no significant changes in cephalometric measurements or the 3D position of the maxillary dentition were observed. The maxillary and mandibular dentitions did not significantly change during post-treatment follow-up. Conclusions: Maxillary molar intrusion using mini-screws is an effective treatment for open bite correction, with the achieved occlusion demonstrating 3D stability at least 1 year after treatment. Full article

(1) Background: A missing bilateral maxillary lateral incisor (MBMLI) causes aesthetic and functional problems and a multidisciplinary approach is required for treatment. This study aimed to compare the changes in the mesiodistal axial angulations of the maxillary canines and central incisors with orthodontic treatment of MBMLI. (2) Methods: A total of 56 patients with MBMLI were included in the study, and three groups were formed: the control group (Group 1, n = 20) with untreated ideal occlusion and the space opening (Group 2, n = 20) and space closure (Group 3, n = 16) groups as treated study groups. The mesiodistal angulations between the long axes of the maxillary right canine (tooth no 13), right central incisor (tooth no 11), left central incisor (tooth no 21) and maxillary left canine (tooth no 23), and the bicondylar plane, were measured on the panoramic radiographs taken pre (T0) and post treatment (T1). p < 0.05 was accepted for statistical significance. (3) Results: At T0, while there was no significant difference between the mesiodistal angulations of the right–left maxillary canines and central incisors in all groups (p > 0.05), the mesiodistal angulations of the canines in the Group 1 were significantly higher than the study groups (p < 0.05). With treatment, while the mesiodistal angulation of the canines increased in Group 2, it decreased in Group 3 (p < 0.05). On the other hand, the mesiodistal angulation of the central incisors decreased in Group 2 and did not change in Group 3 (p > 0.05). At T1, the mesiodistal angulation of the canines was found to be lower in Group 3 than in Groups 1 and 2, while the angulation of the central incisors was found to be lower in Group 2 compared to Group 1 (p < 0.05). (4) Conclusions: In the orthodontic treatment of MBMLIs, changes in the mesiodistal angulations of the maxillary canine and central incisors should be taken into account for satisfactory outcomes. It was concluded that there should be a tendency to select the space closure method in which normal mesiodistal angulations are obtained in maxillary central incisors for aesthetics and planned incisor position, and also at a low cost. Full article

(1) Background: Orthodontic treatment may be a potential predisposing factor for ECR. The affected tooth goes to ankylosis, which could lead to a malocclusion. Although teeth severely affected by ECR (class IV Heithersay) are usually extracted, this case report aims to present the use of an ECR class IV upper canine, both as ankylosed to solve the malocclusion and the occlusal plane canting, as well as not ankylosed to correct its ridge defect with orthodontic extrusion. (2) Methods: A 14-year-old male, complaining of an ugly smile and a failed orthodontic attempt to recover an impacted canine, was referred to the orthodontic clinic. He was diagnosed with class II right subdivision, midline deviation, both upper and lower occlusal plane canting, and an upper left canine, previously impacted, showing ECR class IV. The treatment first included canting resolution with a cantilever and a spring, exploiting the anchorage offered by the ankylosed ECR canine. Then, a coronectomy, endodontic treatment, and orthodontic extrusion of that canine were performed to obtain the implant site development. (3) Results: Clinical and radiographic outcomes showed normocclusion and better bony conditions for safer implant placement in the aesthetic zone. (4) Conclusions: The high aesthetics and the periodontal and bony conditions obtained are probably not achievable by other therapeutic alternatives. Full article

Background: The risk of palatally displaced canines (PDCs) rises in patients with tooth agenesis. The orthodontic extrusion and alignment of PDCs require adequate anchorage to enable tooth movement and control the side effects. There is no paper presenting treatment in the case of severe oligodontia with simultaneous PDCs and the use of mini-implants (MIs) for their orthodontic extrusion. Case presentation: A 15-year-old patient presented with non-syndromic oligodontia and bilateral PDCs. Cone beam computed tomography revealed that both PDCs were in proximity to the upper incisors’ roots. There was no evident external root resorption of the incisors. The “canines first” approach was chosen. MIs were used both as direct and indirect anchorage. First, the extrusive forces of cantilevers were directed both occlusally and distally. Next, the buccal directions of forces were implemented. Finally, fixed appliances were used. PDCs were extruded, aligned, and torqued. Proper alignment and occlusion were achieved to enable further prosthodontic restorations. Conclusions: The use of MIs made it possible to avoid collateral effects, reduce the risk of complications, and treat the patient effectively. MIs provide adequate anchorage in demanding cases. The use of MIs for the extrusion of PDCs made it possible to offer this treatment option to patients with severe oligodontia. The presented protocol was effective and served to circumvent treatment limitations associated with an inadequate amount of dental anchorage and a high risk of root resorption. Full article