Search Results (11)

Hyaluronic acid (HA) fillers are extensively utilized in aesthetic medicine due to their biocompatibility, reversibility, and effectiveness in enhancing skin hydration, volume, and overall appearance. These fillers are predominantly produced through microbial fermentation, followed by a critical cross-linking process that enhances their longevity by resisting enzymatic degradation. This review provides a thorough examination of the manufacturing processes that differentiate HA fillers, with particular attention to the distinctions between biphasic and monophasic variants. Unlike previous studies, this review emphasizes the specific cross-linking techniques and their substantial impact on the fillers’ rheological properties, such as elasticity and cohesiveness, which are crucial to their clinical performance and patient outcomes. Additionally, the review offers a comprehensive comparison of HA fillers with non-HA alternatives, including calcium hydroxylapatite, poly-l-lactic acid, and polymethyl methacrylate, highlighting the unique advantages and potential complications associated with each type. By presenting novel insights into the latest advancements and challenges in filler technology, this review aims to provide clinicians with a deeper understanding of filler properties, thereby guiding them in making informed decisions to optimize patient safety and aesthetic results. Full article

Hyaluronic acid (HA) fillers are widely used in esthetic medicine and are categorized into biphasic and monophasic types based on their manufacturing processes. To evaluate the quality of these fillers, it is essential to understand their rheological properties, which reflect their viscoelastic nature. Rheology, the study of material deformation and flow, reveals how fillers behave under stress, combining properties of solids and liquids. This study explores the fundamental principles of elasticity and viscosity, rooted in Hooke’s law of elasticity and Newton’s law of viscosity, to explain the complex behavior of viscoelastic substances like HA fillers. The distinction between biphasic and monophasic fillers lies in their chemical cross-linking processes, which impact their molecular weight, structure, and ultimately, their clinical performance. Biphasic fillers with minimal cross-linking rely on natural molecular entanglements, exhibiting lower modification efficiency and greater elasticity. Conversely, monophasic fillers, which undergo extensive chemical cross-linking, demonstrate higher modification efficiency, firmer texture, and enhanced resistance to enzymatic degradation. The study emphasizes the importance of thoroughly removing residual cross-linking agents to ensure filler safety. Understanding these rheological characteristics aids clinicians in selecting appropriate fillers based on injection sites, tissue conditions, and desired outcomes, balancing viscoelastic properties and safety for optimal esthetic results. Full article

Bone loss is a major burden for society and impacts people’s health all over the world. In a changing world looking toward a more conscious use of raw materials, efforts are being made to increasingly consider new promising biomaterials that account for, on one side, the ability to provide specific functional biological activities and, on the other, the feature of being well tolerated. In this regard, the use of phenolic compounds in the field of bone-related bioengineering shows a rising interest in the development of medical solutions aimed at taking advantage of the multiple beneficial properties of these plant molecules. In this work, the anti-bacterial and anti-inflammatory power of a biphasic calcium phosphate synthetic bone filler coated with a mixture of phenolic compounds was investigated by evaluating the minimal inhibitory concentration (MIC) value against Streptococcus mutans and Porphyromonas gingivalis and the expression of genes involved in inflammation and autophagy by real-time reverse transcription polymerase chain reaction (RT-qPCR) on J774a.1 murine macrophage cells. Results show a MIC of 0.8 μg/mL, a neat anti-inflammatory effect, and induction of autophagy key genes compared to a ceramic bone filler. In conclusion, functionalization with a polyphenol-rich extract confers to a ceramic bone filler anti-bacterial and anti-inflammatory properties. Full article

Pad-type thermal interface materials (TIMs) with composite structures are required to exhibit high thermal conductivity while maintaining conformal contact with the heat sink, which is strongly influenced by the type and content of the thermally conductive filler. This study presents that biphasic metal particles can be effectively aligned using the dielectrophoretic chaining (DEP-C) mechanism, thereby enhancing the thermal conductivity of a pad-type TIM. A eutectic gallium–indium (EGaIn) alloy liquid metal and solid copper were used as the filler materials with two different phases. The biphasic metal particle mixture of EGaIn and Cu (EGaIn-Cu) were better aligned by DEP-C than when they presented individually because fusion between the two particles increased the effective size. As expected, the thermal conductivity of the TIM composites increased when DEP-C aligned the filler. Notably, TIMs with both EGaIn-Cu fillers showed the largest increase in thermal conductivity, of up to 64.6%, and the highest thermal conductivity values after DEP-C application compared to TIMs with only the EGaIn or Cu filler. Finally, the heat dissipation performance of the TIM composite on a lit light-emitting diode is shown, where the TIM with DEP-C-aligned fillers exhibits improved performance. Full article

This study focuses on developing hydroxyapatite synthesized from a CaCO₃-rich byproduct of sugar beet processing called Carbocal^® using a hydrothermal reactor. The purpose of this biomaterial is to enhance the osteoinductivity of implantable surfaces and serve as a bone filler, providing a sustainable and economically more affordable alternative. This research involved compositional analysis and micro- and macrostructural physicochemical characterization, complemented with bioactivity and live/dead assays. The biphasic nature of the Carbocal^®-derived sample was significant within the context of the bioactivity concept previously proposed in the literature. The bioactivity of the biomaterial was demonstrated through a viability test, where the cell growth was nearly equivalent to that of the positive control. For comparison purposes, the same tests were conducted with two additional samples: hydroxyapatite obtained from CaCO₃ and commercial hydroxyapatite. The resulting product of this process is biocompatible and possesses properties similar to natural hydroxyapatite. Consequently, this biomaterial shows potential as a scaffold in tissue engineering and as an adhesive filler to promote bone regeneration within the context of the circular bioeconomy in the geographical area proposed. Full article

Treatments for osteochondral defects (OCDs) are mainly palliative and, with the increase in this pathology seen among both young and elderly people, an alternative treatment modality is sought. Many tissue-engineered strategies have been explored for regenerating the cartilage–bone interface; however, they generally fall short of being ideal. Although cell-laden hydrogel scaffolds are a common approach for bone and cartilage tissue regeneration, they usually lack homogenous cell dispersion and patient specificity. In this study, a biphasic 3D bioprinted composite scaffold was fabricated for cartilage–bone interface regeneration. To overcome the shortcoming of both materials, alginate–gelatin (A–G) hydrogel was used to confer a naturally occurring environment for the cells and polycaprolactone (PCL) was used to enhance mechanical stability, thus maximizing the overall performance. Hydroxyapatite fillers were added to the PCL in the bone phase of the scaffold to improve its bioactivity. Physical and biological evaluation of scaffolds in both phases was assessed. The scaffolds demonstrated a desirable biological response both singly and in the combined PCL/A-G scaffolds, in both the short term and longer term, showing promise as an interfacial material between cartilage and bone. Full article

We investigated, via a phase-field model simulation, the effects of a matrix’s properties and a filler’s characters on the polytetrafluoroethylene (PTFE) crystal growth process in composites under various supercooling degrees. The results show that the supercooling degree has a deciding influence on the crystal growth process. The intrinsic properties of PTFE polymer, such as anisotropic strength and phase transition latent heat, affect the growth rate, orientation, and interfacial integrity of the crystal trunk and the branching of the PTFE crystal growth process. The factors of the PTFE crystallization process, such as anisotropic strength and phase translation interface thickness, affect the uniformity and crystallization degree of the PTFE crystal. In the composites, the biphasic interface induces the crystal growth direction via the polymer chain segment migration rate, of which the degree depends on the shapes of the filler and the PTFE crystal nucleus. According to the results, choosing the low molecular weight PTFE and mixture filler with various particle sizes and surface curvatures as the raw materials of PTFE-based composites improves the crystallization of the PTFE matrix. Full article

Alloplasts are synthetic, inorganic, biocompatible bone substitutes that function as defect fillers to repair skeletal defects. The acceptance of these substitutes by host tissues is determined by the pore diameter and the porosity and inter-connectivity. This narrative review appraises recent developments, characterization, and biological performance of different synthetic materials for bone, periodontal, and dental tissue regeneration. They include calcium phosphate cements and their variants β-tricalcium phosphate (β-TCP) ceramics and biphasic calcium phosphates (hydroxyapatite (HA) and β-TCP ceramics), calcium sulfate, bioactive glasses and polymer-based bone substitutes which include variants of polycaprolactone. In summary, the search for synthetic bone substitutes remains elusive with calcium compounds providing the best synthetic substitute. The combination of calcium sulphate and β-TCP provides improved handling of the materials, dispensing with the need for a traditional membrane in guided bone regeneration. Evidence is supportive of improved angiogenesis at the recipient sites. One such product, (EthOss^® Regeneration, Silesden, UK) has won numerous awards internationally as a commercial success. Bioglasses and polymers, which have been used as medical devices, are still in the experimental stage for dental application. Polycaprolactone-TCP, one of the products in this category is currently undergoing further randomized clinical trials as a 3D socket preservation filler. These aforementioned products may have vast potential for substituting human/animal-based bone grafts. Full article

Dermal fillers are gel-type substances for nonsurgical medical-device use to achieve facial rejuvenation. Currently, the most widely used skin fillers are hyaluronic-acid-based dermal fillers. This study aimed to explain the change in the volume of injected dermal fillers by developing a mathematical kinetic model for various dermal fillers. The kinetics of the injected fillers were separated by a biphasic phenomenon. We attributed an increase in filler volume to the hydration of hyaluronic acid molecules and injection-site reaction and a decrease in volume to enzyme-mediated degradation. To explain these in vivo characteristics of dermal fillers, we proposed a two-compartment model, divided into a depot compartment (where the filler was injected) and a subcutaneous compartment (an observation compartment where the fillers swell and degrade), assuming that the swelling and degradation occurred in accordance with the swelling and degradation rate constants, respectively. The model was developed using five hyaluronic-acid-based dermal fillers and NONMEM. We determined that the rate-limiting step for the complete degradation of the dermal fillers in vivo was the swelling phase, as described by the swelling rate constant (K_swell). This study could enable scientists developing novel dermal fillers to predict the in vivo behavior of fillers. Full article

This research work is the first to report thermal stability, heat deformation resistance, and crystallization behavior of a Polyethylene (PE)-based biphasic polyolefin system reinforced with Reduced Graphene Oxide (RGO), which was obtained through Graphene Oxide (GO) chemical reduction. Polypropylene (PP) represented the polymeric dispersed phase. A strategic PE/PP/RGO manufacturing procedure was employed to thermodynamically localize RGO at the PE/PP interface, as confirmed by Transmission Electron Microscopy (TEM), bringing a uniform micro phase dispersion into the macro phase. In addition, studies of PE non-isothermal crystallization kinetics indicated that the morphology tunable micro phase and the nanolayered RGO promoted a nucleation-controlled PE crystallization, which was supported by Polarized Light Optical Microscopy (PLOM). This, together with fine morphology, justified the remarkable enhancement registered for the ternary system’s thermal stability and heat deformation resistance. Different filler loads were employed, with weight fractions of 2% and 4%. It was observed that the former, being better exfoliated and more homogeneously distributed at the PE/PP interface than the latter, led to a more improved PE crystallization, alongside a greater ternary system’s thermal properties. Moreover, the thermal stability of PE/PP reinforced with 2% of RGO was even higher than that of virgin PP, while their heat deformation resistance values were found to be similar. Therefore, this unique outcome provides industries, such as the energy and automotive sectors, with the opportunity to substitute PP-rich products with those mostly comprised of a cheaper, more abundant, yet performant PE. Full article

The present work describes the influence of the parameters employed in the gas tungsten arc welding process (GTAW) when nickel powder is used as a filler metal in 2304/2507 duplex stainless-steel dissimilar joints. Multi-objective optimization was applied in order to maintain the austenite/ferrite percentage in the welded zone. A microstructural and phase quantification analysis was performed in each sample through optical and scanning electron microscopes. It was found that a nickel powder addition combined with low heat input increased the biphasic ratio across the different zones of the dissimilar welded samples. Although the austenite volume fraction increased in the 2304 heat-affected zone (HAZ) near to 25%, it was not sufficient according to international standards. The obtained results led to the maintenance of the 50/50 phase percentage in the 2507 HAZ welded joint side, as well as to the increment of the austenite percentage in the 2304 HAZ. Full article