Search Results (3,163)

The growing use of reclaimed asphalt pavement (RAP) in hot mix asphalt (HMA) is an important practice to achieve more sustainable pavements, as it reduces the consumption and environmental impact of virgin materials. However, aging induces binder stiffening that requires effective rejuvenation to restore overall performance. This study provides a comprehensive comparative analysis of ten chemically different waste oils—waste engine oil (WEO), waste cooking oil (WCO), yellow grease (YG), waste hydraulic oil (WHO) waste electric transformer oil (WETO), slop oil (SO), sludge-derived bio-oil (SDBO), tire pyrolysis oil (TPO), plastic pyrolysis oil (PPO), and algal residue oil (ARO)—as recycled HMA mixture rejuvenators, linking oil composition to binder regeneration and mixture performance. Binder properties were determined by rotational viscosity (RV), dynamic shear rheometer (DSR) and bending beam rheometer (BBR), whereas mixture performance was assessed in terms of Superpave mechanical properties, Hamburg wheel-tracking test (HWTT) for rutting resistance and mixture BBR for low-temperature cracking resistance. Performance grade (PG) evaluations showed that WETO and WEO restored the 50% and 75% RAP binders, respectively, to a grade close to PG 64-16 at the lowest dosages. The Superpave volumetric properties of all restored mixtures were similar to those of the control mixture, denoting corrected mixture balance and compaction level. HWTT results indicated that WETO-recycled mixtures revealed the lowest rut depth at 50% RAP, while WEO-recycled mixtures exhibited the lowest rut depth at 75% RAP after 20000 passes. Additional evidence supporting these results can be found in BBR mixture data, which demonstrated that WETO at 50% RAP and WEO/WETO at 75% RAP showed the most reduction in creep stiffness and improvement in creep rate. The correlation, regression, and PI analyses were in good agreement with the experimental results, where WETO and WEO exhibited the best overall performance at 50% and 75% RAP, respectively. In summary, these results indicate that the performance of waste oil rejuvenator in recycled HMA mixtures is highly dependent on RAP content and point to WETO and WEO as feasible, environmentally friendly options for high-RAP recycled HMA. Full article

The present paper highlights a critical assessment of the large-scale production and accumulation of date palm (Phoenix dactylifera) by-products. These have been identified as both serious environmental problems and potential renewable energy sources. Landfilling, burning in fields, and other such poor methods are common among many of the countries producing dates as ways to dispose of huge amounts of date palm by-products. The current literature has been assessed for their utilization in energy generation in the form of a circular bioeconomy with respect to the characteristics and composition of date palm seeds, leaflets, rachis and fibers. The study reveals that thermochemical conversion methods such as pyrolysis, gasification and hydrothermal processes are very efficient for the conversion of date palm residues into bio-oil, syngas and biochar. The resulting bio-oils are, however, rich in oxygen, acidic and unstable in nature and need to be upgraded using a catalytic process. Moreover, the review highlights that advanced catalytic technologies can greatly improve the quality of fuel through deoxygenation and the synthesis of hydrocarbons, resulting in the production of “drop-in” gasoline components and SAFs that have characteristics close to those of regular petroleum-based fuels. Also, artificial intelligence- and machine learning-based modeling techniques appear to offer considerable prospects in the realm of thermokinetic studies, process design, and large-scale implementation. Furthermore, the results point out two environmental advantages that accrue from the date palm valorization process, since biochar generated via thermochemical transformation can be used for seawater desalination. Lastly, the techno-economic evaluation and roadmap of future development directions are provided. Full article

In protracted humanitarian crises, solid waste management (SWM) becomes a major challenge due to limited resources, inadequate infrastructure, and competing response priorities. Waste generated in humanitarian settings typically consist of heterogeneous streams, where plastics, biodegradable fractions, and packaging materials represent the dominant components. Proper management of this waste is essential to reduce health risks and environmental impacts on local communities. Within this framework, sustainable bio-based alternatives and compostable solutions represent promising alternatives. The EU-funded Bio4HUMAN project promotes the integration of innovative bio-based solutions aligned with humanitarian and sustainability goals. An exploratory assessment focused on analyzing waste production, material composition, and handling practices in two case study locations in Sub-Saharan Africa (Democratic Republic of Congo (DRC) and South Sudan (SS)). The results indicate that humanitarian waste cannot be clearly distinguished from household or commercial waste, as streams are typically mixed. Waste composition is dominated by organic matter (43–65%), followed by plastics (15–33%), while other fractions such as paper, glass, metals, and textiles are less significant. Further insights into challenges and opportunities were obtained through a combination of quantitative surveys (n = 29), qualitative interviews with key informants (KIIs) (44) and group discussions sessions (FDG) (9), direct observations, and literature review. Subsequently, a scoping approach was applied to map and classify suitable sustainable solutions into two main categories: bio-based products (BBPs) and organic waste valorization technologies. These were assessed through life cycle assessment (LCA) in accordance with ISO 14040 and 14044, applying SimaPro v.10.2.0.3 software and the Ecoinvent 3.10 database, and compared against fossil-based alternatives. This study compares two case scenarios: a HDPE oil bottle versus PLA alternative (functional unit 6 L), and PE water container versus PLA alternative (functional unit 10 L). For the oil bottle, PLA shows a lower carbon footprint (1.33 kg CO₂-eq) than HDPE (2.37 kg CO₂-eq). In contrast, for the water container, PLA performs worse (2.22 kg CO₂-eq) compared to PE (1.59 kg CO₂-eq), due to higher material demand. The results suggest that benefits are context-dependent and most evident for lightweight products with high leakage risks, particularly when composting infrastructure is accessible. This study advances previous work on humanitarian SWM by integrating field-based waste flow characterization with context-specific screening and life cycle assessment of bio-based alternatives, providing quantitative evidence on the conditions under which these solutions can effectively reduce environmental burdens in protracted crisis settings. Full article

Coagulation–flocculation is widely recognized as a fundamental step in wastewater treatment, as it promotes the aggregation and removal of suspended particles and organic contaminants following the addition of a coagulant. In this study, a bio-based coagulant was prepared from prickly pear (Opuntia ficus-indica) seed residues obtained after essential oil extraction. The extraction process for bioactive agents was successfully modeled using Central Composite Design (CCD)-based Response Surface Methodology (RSM). Optimal extraction was reached at pH 13, PPSM of 7.5 g, 0.75 M NaCl, and 40 min of stirring, providing maximum yields of 69.63 g proteins, 217.075 g total sugars, and 81.416 g polyphenols. The optimized extract was subsequently used as a bio-coagulant for the treatment of wastewater collected from the Chalghoum El Aid–Oued El Athmania wastewater treatment plant (Mila, Algeria). The effects of three operating parameters, initial turbidity, solution pH, and bio-coagulant dosage, on the coagulation–flocculation performance were investigated using a Box–Behnken design (BBD). Process efficiency was evaluated in terms of turbidity, chemical oxygen demand (COD), and organic matter (OM) removal. The raw wastewater exhibited initial values of 200 NTU for turbidity, 640 mg/L for COD, and 25 for organic matter. Statistical analysis revealed that the developed quadratic models were highly significant (p ≤ 0.05) and showed excellent predictive performance, with coefficients of determination (R² ≥ 0.97). Optimal treatment conditions were identified at pH 7, a bio-coagulant dosage of 1 mL/L, and an initial turbidity of 200 NTU. Under these conditions, removal efficiencies exceeded 98% for turbidity and COD and reached 88.08% for organic matter. Furthermore, Fourier-Transform Infrared (FTIR) Spectroscopy analysis confirmed the presence of functional groups responsible for the coagulation activity of the bio-coagulant. These findings highlight the potential of prickly pear seed residues as an effective, sustainable, and low-cost alternative to conventional chemical coagulants in wastewater treatment. Full article

Natural lacquer, a bio-based polymer derived from Toxicodendron vernicifluum, has attracted renewed scientific interest as a sustainable coating material with exceptional mechanical durability, chemical resistance, and aesthetic qualities. This review synthesizes current knowledge on the chemical composition, enzymatic curing mechanisms, and structure–property relationships of lacquer-based polymer systems, with particular focus on recent advances in functional modification and processing technology. Key findings indicate that laccase-catalyzed oxidative polymerization, operating optimally at pH 6.0–7.5 and 20–30 °C, governs the formation of a highly cross-linked urushiol network whose properties are fundamentally determined by side-chain unsaturation and emulsion stability. Mechanistic analysis reveals that polyurethane hybridization improves weathering resistance by introducing flexible aliphatic segments and additional hydrogen-bonding cross-links, while graphene oxide incorporation enhances anticorrosion performance through a physical barrier mechanism that prolongs ionic diffusion pathways. UV-curable LPEA derivatives achieve an 83% reduction in curing time relative to ambient-cured lacquer, enabling integration with industrial spray-coating lines. Despite these advances, several critical limitations remain inadequately resolved. Allergen reduction strategies have not yet achieved sufficient quantitative efficiency for large-scale commercial deployment, and the long-term stability of nanocomposite lacquer films under sustained UV exposure and hydrothermal conditions is not well established. Furthermore, most high-performance modification systems reported in the literature are demonstrated only on laboratory scale, with scalability, substrate compatibility, and lifecycle performance remaining largely unvalidated. The review identifies the absence of standardized performance evaluation protocols and the fragmentation of structure–property data across studies as key barriers to systematic progress, and proposes that future work prioritize the development of integrated processing–modification–performance frameworks to guide the rational design of next-generation lacquer-based functional materials. Full article

This study critically addresses the challenge of selecting optimal insulation materials for contemporary, energy-efficient building envelopes, a decision with profound environmental, structural, and occupational health consequences. The paper responds to the growing demand for sustainable, resilient solutions by comparing wool, a bio-based, regenerative material, and expanded polystyrene (EPS), a synthetic polymer widely implemented in the construction industry, and advanced laboratory testing (thermal conductivity, moisture buffering, freeze–thaw resistance) is discussed in a comprehensive synthesis of the recent literature. Also, field evaluations from European retrofits and pilot projects (UK, Denmark, Finland, Iceland, Norway, Sweden, Germany and France) further contextualize performance outcomes, and life cycle impacts are considered. Recent results reveal that wool insulation achieves a moisture buffering value (MBV) between 1.8 and 2.7 (g/m²) % RH, minimal vapor resistance (mvr = 1–2), and preserves functional and structural integrity through more than 100 freeze–thaw cycles, leading to significant stabilization of the interior microclimate and enhanced durability. In contrast, EPS delivers lower thermal conductivity (0.032–0.037 (W/mK), critical for reducing heating/cooling demand, but exhibits limited vapor permeability (lvp = 60–150 MN·s/(g·m)), increased risk of condensation and mold, and reduced compressive strength (<22% after 30 cycles), especially when ventilation details are inadequate. Hybrid envelope systems leveraging both EPS and wool are demonstrated to optimize energy efficiency (up to 23% seasonal savings) and reduce interior humidity fluctuations, while lifecycle and recycling assessments show wool panels to be markedly superior in carbon footprint reduction and circularity. The stratification of insulation layers incorporating wool for vapor and moisture control, and EPS for pure thermal resistance is emerging as best practice in sustainable retrofit and new-build projects. Recommendations highlight the necessity for rigorous laboratory validation, international standards alignment, and integrated material design for robust hygrothermal comfort and environmental performance. The review also covers wool- and EPS-based hybrid composites, showing how natural fibers can improve key mechanical properties without compromising thermal insulation performance or environmental benefits. Full article

This study develops the BIO-SPA Certification Model, a novel framework for evaluating the spatial organisation and biophilic design performance of spa centres within hotel and resort facilities. The research focuses on spa environments in five-star accommodation establishments in Antalya, Türkiye. The methodology integrates two assessment components: spatial design performance (SPA) and biophilic design performance (BIO). Spatial evaluations examined architectural layouts, functional zoning, circulation systems, and operational relationships, while biophilic evaluations assessed natural elements, restorative qualities, and sensory environmental conditions. A weighted multi-criteria scoring system was employed to calculate composite BIO-SPA scores and certification levels. The results revealed significant differences between spatial efficiency and biophilic quality. Some facilities demonstrated strong operational organisation but limited integration of nature-based experiences, whereas others achieved higher biophilic performance despite lower spatial efficiency. None of the analysed facilities attained the highest certification level within the proposed framework. The findings indicate that existing spa certification systems remain limited in assessing restorative spatial quality and biophilic integration. The BIO-SPA Certification Model contributes to the literature by providing a measurable and verifiable framework that integrates wellness-oriented design principles with spatial performance evaluation in spa environments. Full article

Gold nanoparticles (AuNPs) have emerged as versatile antiviral nanoplatforms because their size, morphology, plasmonic properties, and surface chemistry can be precisely engineered. In this review, we summarize the core design principles of antiviral AuNPs from a structure–function–mechanism perspective. We first outline representative synthetic and interface-programming routes for AuNP preparation, including citrate reduction, Brust–Schiffrin synthesis, seed-mediated growth, green synthesis, direct thiol-conjugation, and mixed-ligand shell strategies, emphasizing how these approaches define particle size, morphology, surface accessibility, interfacial composition, and downstream biofunctionalization potential. We then discuss major surface engineering strategies, including polyethylene glycol, nucleic acids, antibodies and nanobodies, peptides, glycans, antiviral drugs, and biomimetic coatings, with particular attention to how ligand density, orientation, flexibility, and interfacial stability determine biological performance. Next, we examine how functionalized AuNPs inhibit different stages of the viral life cycle, including viral attachment and entry, intracellular replication, assembly and egress, photothermal inactivation, and immune modulation or vaccine delivery. Finally, we highlight current challenges, including incomplete structure–activity relationships, dynamic nano–bio interactions under physiological conditions, limited standardization across studies, and translational barriers related to safety, reproducibility, and scale-up. This review provides a conceptual framework for the rational development of next-generation AuNP-based antiviral nanotherapeutics. Full article

Bio-based and biodegradable polymers such as short-chain-length (scl) poly(3-hydroxybutyrate) (PHB) and poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) are widely adopted in diverse areas such as healthcare, manufacturing, and packaging. However, high production costs and the complexity of tailoring their thermal properties, such as glass transition temperature (Tg), melting temperature (Tm), and crystallization temperature (Tc), hinder further adoption. The current study reported on the development of a raw dataset of PHB and PHBV materials compiled from 572 instances collected from the literature (558 instances) and in-house experiments (14 instances). The dataset encompassed compositional physicochemical parameters, molecular features, and corresponding thermal characteristics. After assessing data quality and filtering for completeness and available features, curated datasets were created for machine learning (ML) analysis. Two ML models, Random Forest (RF) and eXtreme Gradient Boosting (XGBoost), were utilized to predict values of Tg, Tc, and Tm using feature engineering methods that integrated chemistry-based descriptors with polymer-specific and experimental variables. The predictive performance of the models was systematically investigated using different combinations of input features to identify the most informative descriptor sets for each target property. The best-performing models were obtained using 118 data points for Tg and Tm and 201 data points for Tc, achieving R² values of 0.77, 0.76, and 0.82 for Tg, Tc, and Tm, respectively. Despite the reliable prediction of the thermal properties of scl-PHAs, the main limitations of the study were the relatively small dataset size for certain targets and incomplete or missing reporting of experimental conditions in the literature sources, which may introduce variability in the compiled data. The findings implied that curated polymer datasets and interpretable ML models can support the rational design of sustainable polymers with tailored properties for specific applications. Full article

Femtosecond laser surface texturing offers a promising route to tailor the functionality of bio-based wood coatings, yet the interplay between coating composition and laser processing remains poorly understood. In this study, bio-based epoxy coatings with eventual micronized wax additives were textured using a femtosecond laser to investigate the effects of laser processing parameters on pattern formation and resulting hydrophobicity. The epoxy coatings containing PE, PE/PTFE, HDPE, and rice bran waxes at 1, 5, and 7 wt.-% were characterized in terms of morphology, roughness, wettability, and chemical stability, followed by systematic variation of pulse repetition rate and laser power. The results reveal that the ablation threshold strongly depends on intrinsic coating properties. Ablation resistance increases with surface roughness and wax melting enthalpy, reflecting the role of phase transition energy in laser–matter interaction. The wax-filled coatings exhibit a transition from melting-dominated behavior at low energy input to ablation-dominated behavior at a higher energy. Laser texturing enhances hydrophobicity in parallel with theoretical values calculated from the Cassie–Baxter wetting model, with the highest hydrophobicity achieved for coatings combining intrinsic hydrophobicity and stable pattern formation. Chemical analysis confirms limited degradation of the epoxy matrix without significant carbonization, while wax additives provide partial thermal shielding. Overall, this work demonstrates clear options for tailoring surface morphology and wettability of hydrophobic polymer coatings through controlled femtosecond laser processing. Full article

Bio-based and biodegradable polymer composites based on polylactic acid (PLA) and polybutylene succinate-co-adipate (PBSA) were developed for rigid food packaging applications. Agro-industrial residues consisting of ground leaves and branches derived from tangerine tree cultivation (pruning) were used as fillers at high loading (30 wt%) before (PRE) or after (POST) extraction of bioactive compounds. The influence of blend composition (PLA/PBSA 60/40 and 30/70), filler extraction, and the addition of antioxidants (0.5 wt%) on material properties was systematically investigated. Composites were processed via extrusion and injection molding and characterized through FTIR, SEM, tensile testing and thermal analysis. The results show that polymer blend morphology affects mechanical behavior, with co-continuous structures (60/40) exhibiting improved ductility compared to dispersed systems (30/70). The incorporation of lignocellulosic residues increased stiffness but reduced elongation at break. Extraction treatment significantly modified filler morphology and interfacial interactions, slightly improving dispersion and processability. The effect of the extracted bioactive compounds on the thermal stabilization of biocomposites was also investigated. Overall, the findings demonstrate the potential of combining biodegradable polymer blends with treated agricultural residues to produce sustainable rigid packaging materials while supporting a bio-circular approach. In fact, preliminary extraction of valuable compounds from tangerine pruning waste appears to be a convenient strategy for its efficient cascade valorization. Full article

Artificial intelligence (AI) is increasingly influencing nanopharmaceutical development by supporting the transition from empirical formulation screening toward predictive, data-driven, and translationally oriented design. Nanocarrier-based therapeutics are governed by nonlinear relationships among material composition, physicochemical attributes, manufacturing parameters, biological identity, pharmacokinetics, toxicity, and therapeutic performance. In this review, we examine how AI can contribute to nanopharmaceutical development from predictive formulation design to clinical translation. We synthesize current applications of machine learning, deep learning, physics-informed modeling, hybrid mechanistic–AI approaches, and automated optimization workflows, with emphasis on critical quality attribute modeling, multi-objective optimization, design of experiments, quality-by-design, process analytical technology, digital twins, and continuous manufacturing. We also discuss applications involving nano–bio interactions, pharmacokinetics, toxicity, immunogenicity, and precision nanomedicine. AI-based approaches can support rational nanocarrier design, identify nonlinear formulation–property relationships, guide optimization, improve process understanding, and integrate heterogeneous experimental, biological, and manufacturing datasets across diverse nanopharmaceutical platforms. These methods are particularly relevant for modeling protein corona formation, cellular uptake, intracellular trafficking, biodistribution, pharmacokinetics, toxicity, immunogenicity, and patient-specific responses. However, translational implementation remains limited by fragmented datasets, inconsistent reporting standards, limited interpretability, insufficient external validation, uncertain predictions, poorly defined applicability domains, and evolving regulatory expectations for adaptive computational models. Overall, AI should be viewed not only as an optimization tool, but also as a translational framework connecting formulation science, biological prediction, manufacturing control, and clinical implementation. Future progress will depend on standardized data infrastructures, explainable and externally validated models, uncertainty quantification, applicability-domain definition, hybrid mechanistic–AI frameworks, regulatory-ready documentation, and clinically relevant case studies. Full article

Bio-silica particles derived from rice husks were coated with MgAl layered double hydroxides (LDHs) and thermally converted into layered double oxides (LDOs) to evaluate fluoride capture and release capability. The deposition of an MgAl LDH layer on the silica particle makes the LDH more accessible for interaction. Fluoride loading was tested in aqueous and ethanol–water media, with mixed solvents consistently enhancing uptake. Release studies in demineralized water showed relatively rapid desorption (~1500 min), whereas embedding particles in an acrylic matrix reduced the release rate by nearly two orders of magnitude, enabling sustained release levels suitable for dental applications. Ethanol promoted both ion exchange and memory effect mechanisms, providing tunable control over fluoride incorporation and release. These functional composites demonstrate potential for controlled delivery in dental restorative materials, highlighting their potential as adaptive fillers that can enhance the mechanical properties while also serving a functional base for low fluoride release. Full article

Retrofitting existing buildings has become a critical strategy for reducing energy consumption, improving thermal comfort, and achieving carbon reduction targets in the built environment. Among retrofit measures, wall insulation plays a pivotal role in minimizing heat loss and enhancing building energy efficiency. Conventional insulation materials, although effective, are often associated with high embodied energy, limited recyclability, and environmental concerns. Consequently, bio-based composite materials derived from natural fibers, agricultural residues, and renewable binders have emerged as promising sustainable alternatives. However, the moisture sensitivity of lignocellulosic materials remains a major challenge that can compromise thermal performance, durability, and long-term service life. This review provides a comprehensive and critical assessment of bio-based hydrophobic composite panels for wall insulation in retrofit applications. Unlike previous reviews that have primarily examined bio-based insulation materials, natural-fiber composites, or hydrophobic modifications separately, this study integrates these interconnected research domains within a unified framework. The review systematically examines raw material selection, composite panel manufacturing processes, hydrophobic surface-engineering strategies, thermal and moisture-related performance, durability characteristics, retrofit implementation approaches, and sustainability considerations. The analysis demonstrates that hydrophobic modification significantly reduces moisture uptake, enhances dimensional stability, and preserves thermal-insulation performance under varying environmental conditions. Natural-fiber-based composites, including hemp, flax, jute, bamboo, coconut fiber, and agricultural residues, exhibit competitive thermal conductivity (λ) values while offering reduced environmental impacts compared with conventional insulation materials. Furthermore, the integration of advanced hydrophobic treatments improves resistance to water penetration, biological degradation, and freeze–thaw damage, thereby increasing the long-term reliability of retrofit insulation systems. Full article

Bio-based coatings enriched with essential oils (EOs) represent a promising alternative to synthetic preservatives to extend strawberries’ shelf-life. This study evaluated the effects of chitosan (CHT) formulations containing three selected EOs (Illicium verum, Citrus sinensis, and Citrus limon) on the volatile profile, sensory quality, and antifungal activity of strawberry fruits. Volatile emissions were characterized by Headspace Solid Phase Micro-Extraction/Gas Chromatography-Mass Spectrometry, while sensory properties were assessed using Quantitative Descriptive Analysis. Antifungal activity was evaluated both in vitro and in vivo against Botrytis cinerea. Chitosan alone slightly modified the volatile profile, while EO-enriched coatings induced marked and concentration-dependent changes, reflecting the chemical composition of the incorporated EOs. Among the tested formulations, CHT combined with 1% C. sinensis EO provided the best balance between preservation of the characteristic strawberry aroma and overall sensory acceptance. In vitro assays showed that EO volatiles, particularly from C. sinensis and I. verum, significantly inhibited fungal growth, while diffusible compounds were less effective. In vivo, EO-containing coatings reduced disease incidence and severity by approximately 50%. These findings highlight the potential of CHT–EO coatings as sustainable options for postharvest preservation, although optimization of EO type and concentration is crucial to balance sensory quality and antimicrobial efficacy. Full article