Search Results (9)

Bamboo, characterized by its high growth speed and short maturation period, occupies 0.875% of the global forest area and significantly contributes to terrestrial carbon cycling. The state of shoot growth can essentially indicate a bamboo forests’ health and productivity. This study explored the potential of backpack laser scanning (BLS) for monitoring the growth of Moso bamboo shoots (Phyllostachys edulis), a key economic species in subtropical China. Initially, the accuracy of BLS in extracting attributes of bamboo and shoots (including diameter at breast height (DBH), height, and real-world coordinates) was validated. An optimized method was developed to address the lower precision of BLS in extracting the DBH for thinner species. Subsequently, this research analyzed the impact of spatial structure and other indicators on shoot emergence stage and growth rate using a random forest model. The results indicate that BLS can accurately extract Moso bamboo and shoot height (RMSE = 0.748 m) even in dense bamboo forests. After optimization, the error in DBH extraction significantly decreased (RMSE = 0.835 cm), with the average planar and elevation errors for Moso bamboo being 0.227 m and 0.132 m, respectively. The main indicators affecting the coordinate error of Moso bamboo were the distance to the start (DS) and the distance to the trajectory (DT). The emergence time of shoots was mainly influenced by the surrounding Moso bamboo quantity, with the leaf area index (LAI) and competition index (CI) positively related to the growth rate of shoots. The importance ranking of spatial structure for the carbon storage of shoots was similar to that of the growth rate of shoots, with both identifying LAI as the most significant indicator. This study has validated the value of BLS in monitoring the growth of shoots, providing a theoretical support for the sustainable management and conservation of bamboo forests. Full article

The growing focus on the role of forests in carbon sequestration highlights the importance of accurately and efficiently measuring biophysical traits, such as diameter at breast height (DBH) and tree height. Understanding genetic contributions to trait variation is crucial for enhancing carbon storage through the genetic improvement of forest trees. Light detection and ranging (LiDAR) has been used to estimate DBH and tree height; however, few studies have explored the heritability of these traits or assessed the accuracy of biomass increment selection based on them. Therefore, this study aimed to leverage LiDAR to measure DBH and tree height, estimate tree heritability, and evaluate the accuracy of timber volume selection based on these traits, using 60-year-old larch as the study material. Unmanned aerial vehicle laser scanning (ULS) and backpack laser scanning (BLS) were compared against hand-measured values. The accuracy of DBH estimations using BLS resulted in a root mean square error (RMSE) of 2.7 cm and a coefficient of determination of 0.67. Conversely, the accuracy achieved with ULS was 4.0 cm in RMSE and a 0.24 coefficient of determination. The heritability of DBH was higher with BLS than with ULS and even exceeded that of hand measurements. Comparisons of timber volume selection accuracy based on the measured traits demonstrated comparable performance between BLS and ULS. These findings underscore the potential of using LiDAR remote sensing to quantitatively measure forest tree biomass and facilitate their genetic improvement of carbon-sequestration ability based on these measurements. Full article

Forests play an important role in promoting carbon cycling and mitigating the urban heat island effect as one of the world’s major carbon storages. Scientifically quantifying tree biomass is the basis for assessing tree carbon storage and other ecosystem functions. In this study, a sample plot of Populus tomentosa plantation in the Olympic Forest Park in Beijing was selected as the research object. Point cloud data from three types of laser scanners, including terrestrial laser scanner (TLS), backpack laser scanner (BLS), and handheld laser scanner (HLS), were used to estimate the biomass of single tree trunks, branches, leaves, and aboveground total biomass based on the Allometric Biomass Model (ABM) and Advanced Quantitative Structure Model (AdQSM). The following conclusions were drawn from the estimation results: (1) For the three types of laser scanner point clouds, the biomass estimation values obtained using the AdQSM model were generally higher than those obtained using the Allometric Biomass Model. However, the estimation values obtained using the two models were similar, especially for tree trunks and total biomass. (2) For total biomass and individual biomass components of single trees, the results obtained from handheld and terrestrial laser scanner point clouds are consistent; however, they show some differences from the results obtained from backpack-mounted point clouds. This study further enriches the methodological system for estimating forest biomass, providing a theoretical basis and reference for more accurate estimates of forest biomass and more sustainable forest management. Full article

Wildfire hazard is a prominent issue in subtropical forests as climate change and extreme drought events increase in frequency. Stand-level fuel load and forest structure are determinants of forest fire occurrence and spread. However, current fuel management often lacks detailed vertical fuel distribution, limiting accurate fire risk assessment and effective fuel policy implementation. In this study, backpack laser scanning (BLS) is used to estimate several 3D structural parameters, including canopy height, crown base height, canopy volume, stand density, vegetation area index (VAI), and vegetation coverage, to characterize the fuel structure characteristics and vertical density distribution variation in different stands of subtropical forests in China. Through standard measurement using BLS point cloud data, we found that canopy height, crown base height, stand density, and VAI in the lower and middle-height strata differed significantly among stand types. Compared to vegetation coverage, the LiDAR-derived VAI can better show significant stratified changes in fuel density in the vertical direction among stand types. Among stand types, conifer-broadleaf mixed forest and C. lanceolata had a higher VAI in surface strata than other stand types, while P. massoniana and conifer-broadleaf mixed forests were particularly unique in having a higher VAI in the lower and middle-height strata, corresponding to the higher surface fuel and ladder fuel in the stand, respectively. To provide more informative support for forest fuel management, BLS LiDAR data combined with other remote sensing data were advocated to facilitate the visualization of fuel density distribution and the development of fire risk assessment. Full article

Forest structural parameters are key indicators for forest growth assessment, and play a critical role in forest resources monitoring and ecosystem management. Terrestrial laser scanning (TLS) can obtain three-dimensional (3D) forest structures with ultra-high precision without destruction, whereas some shortcomings such as non-portability and cost-consuming can limit the quick and broad acquisition of forest structure. Structure from motion (SfM) and backpack laser scanning (BLS) technology have the advantages of low-cost and high-portability while obtaining 3D structure information of forests. In this study, the high-overlapped images and the BLS point cloud, combined with the point cloud registration and individual tree segmentation to extract the forest structural parameters and compared with the TLS for assessing the accuracy and efficiency of low-cost SfM and portable BLS point clouds. Three plots with different forest structural complexity (coniferous, broadleaf and mixed plot) in the northern subtropical forests were selected. Firstly, portable photography camera, BLS and TLS were used to acquire 3D SfM and LiDAR point clouds, and spatial co-registration of different-sourced point cloud datasets were carried out based on the understory markers. Secondly, the point clouds of individual tree trunk and crown were segmented by the comparative shortest-path algorithm (CSP), and then the height and position of individual tree were extracted based on the tree crown point cloud. Thirdly, the trunk diameter at different heights were calculated by point cloud slices using the density-based spatial clustering of applications with noise (DBSCAN) algorithm, and combined with the stem curve of individual tree which was constructed using four Taper equations to estimate the individual tree volume. Finally, the extraction accuracy of forest structural parameters based on SfM and BLS point clouds were verified and comprehensively compared with field-measured and TLS data. The results showed that: (1) the individual tree segmentation based on SfM and BLS point clouds all performed quite well, among which the segmentation accuracy (F) of SfM point cloud was 0.80 and the BLS point cloud was 0.85; and (2) the accuracy of DBH and tree height extraction based on the SfM and BLS point clouds in comparison with the field-measured data were relatively high. The root mean square error (RMSE) of DBH and tree height extraction based on SfM point cloud were 2.15 cm and 4.08 m, and the RMSE of DBH and tree height extraction based on BLS point cloud were 2.06 cm and 1.63 m. This study shows that with the adopted image capture method, terrestrial SfM photogrammetry can be applied quite well in extracting DBH. Full article

To investigate forest resources, it is necessary to identify the tree species. However, it is a challenge to identify tree species using 3D point clouds of trees collected by light detection and ranging (LiDAR). PointNet++, a point cloud deep learning network, can effectively classify 3D objects. It is important to establish high-quality individual tree point cloud datasets when applying PointNet++ to identifying tree species. However, there are different data processing methods to produce sample datasets, and the processes are tedious. In this study, we suggest how to select the appropriate method by designing comparative experiments. We used the backpack laser scanning (BLS) system to collect point cloud data for a total of eight tree species in three regions. We explored the effect of tree height on the classification accuracy of tree species by using different point cloud normalization methods and analyzed the effect of leaf point clouds on classification accuracy by separating the leaves and wood of individual tree point clouds. Five downsampling methods were used: farthest point sampling (FPS), K-means, random, grid average sampling, and nonuniform grid sampling (NGS). Data with different sampling points were designed for the experiments. The results show that the tree height feature is unimportant when using point cloud deep learning methods for tree species classification. For data collected in a single season, the leaf point cloud has little effect on the classification accuracy. The two suitable point cloud downsampling methods we screened were FPS and NGS, and the deep learning network could provide the most accurate tree species classification when the number of individual tree point clouds was in the range of 2048–5120. Our study further illustrates that point-based end-to-end deep learning methods can be used to classify tree species and identify individual tree point clouds. Combined with the low-cost and high-efficiency BLS system, it can effectively improve the efficiency of forest resource surveys. Full article

Exploring the processes of interspecific relationships is crucial to understanding the mechanisms of biodiversity maintenance. Visually detecting interspecies relationships of large mammals is limited by the reconstruction accuracy of the environmental structure and the timely detection of animal behavior. Hence, we used backpack laser scanning (BLS) to reconstruct the high-resolution three-dimensional environmental structure to simulate the process of a predator approaching its prey, indicating that predator tigers would reduce their visibility by changing their behavior. Wild boars will nibble off about 5m of branches around the nest in order to create better visibility around the nest, adopting an anti-predation strategy to detect possible predators in advance. Our study not only points out how predator–prey relationships are affected by visibility as the environment mediates it, but also provides an operable framework for exploring interspecific relationships from a more complex dimension. Finally, this study provides a new perspective for exploring the mechanisms of biodiversity maintenance. Full article

Individual tree structural parameters are vital for precision silviculture in planted forests. This study used near-field LiDAR (light detection and ranging) data (i.e., unmanned aerial vehicle laser scanning (ULS) and ground backpack laser scanning (BLS)) to extract individual tree structural parameters and fit volume models in subtropical planted forests in southeastern China. To do this, firstly, the tree height was acquired from ULS data and the diameter at breast height (DBH) was acquired from BLS data by using individual tree segmentation algorithms. Secondly, point clouds of the complete forest canopy were obtained through the combination of ULS and BLS data. Finally, five tree taper models were fitted using the LiDAR-extracted structural parameters of each tree, and then the optimal taper model was selected. Moreover, standard volume models were used to calculate the stand volume; then, standing timber volume tables were created for dawn redwood and poplar. The extraction of individual tree structural parameters exhibited good performance. The volume model had a good performance in calculating the standing volume for dawn redwood and poplar. Our results demonstrate that near-field LiDAR has a strong capability of extracting tree structural parameters and creating volume tables for subtropical planted forests. Full article

Accurate forest biomass estimation at the individual tree scale is the foundation of timber industry and forest management. It plays an important role in explaining ecological issues and small-scale processes. Remotely sensed images, across a range of spatial and temporal resolutions, with their advantages of non-destructive monitoring, are widely applied in forest biomass monitoring at global, ecoregion or community scales. However, the development of remote sensing applications for forest biomass at the individual tree scale has been relatively slow due to the constraints of spatial resolution and evaluation accuracy of remotely sensed data. With the improvements in platforms and spatial resolutions, as well as the development of remote sensing techniques, the potential for forest biomass estimation at the single tree level has been demonstrated. However, a comprehensive review of remote sensing of forest biomass scaled at individual trees has not been done. This review highlights the theoretical bases, challenges and future perspectives for Light Detection and Ranging (LiDAR) applications of individual trees scaled to whole forests. We summarize research on estimating individual tree volume and aboveground biomass (AGB) using Terrestrial Laser Scanning (TLS), Airborne Laser Scanning (ALS), Unmanned Aerial Vehicle Laser Scanning (UAV-LS) and Mobile Laser Scanning (MLS, including Vehicle-borne Laser Scanning (VLS) and Backpack Laser Scanning (BLS)) data. Full article