Search Results (93)

Estradiol (E2) plays an important role in cell proliferation and certain brain functions. To reveal its mechanism of action, its detectability is essential. Only a few fluorescent-labeled hormonally active E2s exist in the literature, and their mechanism of action usually remains unclear. It would be of particular interest to develop novel labeled estradiol derivatives with retained biological activity and improved optical properties. Due to their superior optical characteristics, aza-BODIPY dyes are frequently used labeling agents in biomedical applications. E2 was labeled with the aza-BODIPY dye at its phenolic hydroxy function via an alkyl linker and a triazole coupling moiety. The estrogenic activity of the newly synthesized fluorescent conjugate was evaluated via transcriptional luciferase assay. Docking calculations were performed for the classical and alternative binding sites (CBS and ABS) of human estrogen receptor α. The terminal alkyne function was introduced into the tetraphenyl aza-BODIPY core via selective formylation, oxidation, and subsequent amidation with propargyl amine. The conjugation was achieved via Cu(I)-catalyzed azide–alkyne click reaction of the aza-BODIPY-alkyne with the 3-O-(4-azidobut-1-yl) derivative of E2. The labeled estrogen induced a dose-dependent transcriptional activity of human estrogen receptor α with a submicromolar EC₅₀ value. Docking calculations revealed that the steroid part has a perfect overlap with E2 in ABS. In CBS, however, a head-tail binding deviation was observed. A facile, fluorescent labeling methodology has been elaborated for the development of a novel red-emitting E2 conjugate with substantial estrogenic activity. Docking experiments uncovered the binding mode of the conjugate in both ABS and CBS. Full article

A series of eleven new N-alkyl 3-(3-benzyloxyquinoxalin-2-yl) propanamides were prepared based on the azide coupling of 3-(3-benzyloxyquinoxalin-2-yl) propanhydrazide with a variety of primary and secondary amines and the consequent conjunction of a broad spectrum of lipophile and hydrophile characters to a quinoxaline ring system. 3-(3-benzyloxyquinoxalin-2-yl) propanhydrazide was produced in a two-step reaction of methyl 3-(3-oxo-3,4-dihydroquinoxalin-2-yl) propanoate with benzyl chloride followed by the hydrazinolysis of the corresponding ester. The antiproliferative activity of the compounds was tested in various cancer cell lines, including PC-3, Hela, HCT-116, and MCF-7; they showed a wide spectrum of activity for most of the tested compounds. Compound 6k exhibited the highest activity, which was comparable to that of doxorubicin, with IC₅₀ (µM) values of 12.17 ± 0.9, 9.46 ± 0.7, 10.88 ± 0.8, and 6.93 ± 0.4 µM compared to 8.87 ± 0.6, 5.57 ± 0.4, 5.23 ± 0.3, and 4.17 ± 0.2 µM for doxorubicin against Hela, HCT-116, and MCF-7, respectively. The in silico mechanistic study revealed the inhibition of HDAC-6 through the binding of the unique zinc finger ubiquitin-binding domain (HDAC6 Zf-UBD). The docking results showed a specific binding pattern that emphasized the crucial role of the quinoxaline ring and its substituents. The newly developed derivatives were evaluated for antitumor effects against four cancer cell lines PC-3, HeLa, HCT-116, and MCF-7. This research led to the identification of a quinoxaline-based scaffold exhibiting broad-spectrum antiproliferative activity and a distinct mechanism involving binding to HDAC6 Zf-UBD. The findings highlight its potential for further optimization and preclinical studies to support future anticancer drug development. Full article

Mechanochemical and transition-metal-catalyzed reactions of alkynes, exhibiting significant advantages like short reaction time, solvent-free, high yield and good selectivity, were considered to be green and sustainable pathways to access functionalized molecules and obtained increasing attention due to the superiorities of mechanochemical processes and the reactivities of alkynes. The ball milling and CuI-catalyzed Sonogashira coupling of alkyne and aryl iodide avoided the use of common palladium catalysts. The mechanochemical Rh(III)- and Au(I)-catalyzed C–H alkynylations of indoles formed the 2-alkynylated and 3-alkynylated indoles selectively. The mechanochemical and copper-catalyzed azide-alkyne cycloaddition (CuAAC) between alkynes and azides were developed to synthesize 1,2,3-triazoles. Isoxazole could be formed through ball-milling-enabled and Ru-promoted cycloaddition of alkyne and hydroxyimidel chloride. In this review, the generation of mechanochemical and transition-metal-catalyzed reactions of alkynes was highlighted. Firstly, the superiority and application of transition-metal-catalyzed reactions of alkynes were briefly introduced. After presenting the usefulness of green chemistry and mechanochemical reactions, mechanochemical and transition-metal-catalyzed reactions of alkynes were classified and demonstrated in detail. Based on different kinds of reactions of alkynes, mechanochemical and transition-metal-catalyzed coupling, cycloaddition and alkenylation reactions were summarized and the proposed reaction mechanisms were disclosed if available. Full article

Chitosan is a natural, biocompatible, biodegradable, and non-toxic polymer that has consistently garnered the attention of researchers in the development of new materials across various applications. Typically, to impart the desired properties to chitosan, chemical modification is necessary. Therefore, the development of simple and convenient methods for the chemical modification of chitosan is crucial in polymer chemistry. In this work, the approaches of Click chemistry and the necessary electrochemistry, which have recently illuminated the chemistry of chitosan, were combined to achieve a straightforward and efficient synthesis of new tetrazole chitosan derivatives. This was accomplished through electrochemical coupling. The proposed synthesis method is simple, convenient, and fast, hence allowing for the easy production of low- (10%), moderate- (30%), and highly substituted (65%) tetrazole chitosan derivatives. The highly substituted chitosan derivatives exhibit high activity as catalysts for the aldol reaction, achieving almost 100% conversion in just 15 min. Notably, these derivatives enable the aldol reaction to be catalyzed in water, aligning with one of the key principles of green chemistry. Furthermore, the new tetrazole chitosan derivatives demonstrate significant in vivo antibacterial effects in the treatment of peritonitis in rats. The primary mechanism of their antibacterial action is the disruption of the bacterial cell membrane integrity. Full article

Background: Gibberellins (GAs) are a family of tetracyclic ent-kaurenoid diterpenes found widely in several commonly used plants. Besides agricultural applications, gibberellins play an important role in the synthesis of bioactive compounds, especially those with antiproliferative and antibacterial activity. Methods: A series of gibberellic acid-based 2,4-diaminopyrimidines was designed and synthesized from commercially available gibberellic acid. The antimicrobial activity of the prepared compounds was also explored in B. subtilis, S. aureus, E. coli, and P. aeruginosa bacteria, as well as in C. krusei and C. albicans fungi. Results: The treatment of gibberellic acid with hydrochloric acid under reflux conditions resulted in aromatization followed by rearrangement to form allo-gibberic acid. The key intermediate azido alcohol was prepared according to the literature methods. The second key intermediate azidotriol was synthesized by the stereoselective dihydroxylation of the allylic function by the osmium (VIII)-tetroxide/NMO system. Starting from azide intermediates, click reactions were also carried out with 4-monoamino- and 2,4-diaminopyrimidines functionalized with the N-propargyl group. The new chimeric compounds, coupled with gibberellins thus obtained, were characterized by 1D- and 2D-NMR techniques and HRMS measurements. While the 4-monoamino-substituted derivatives exhibited only weak antibacterial activity, they demonstrated significant antifungal effectiveness against C. krusei. In general, 5-chloro-substituted pyrimidine derivatives displayed more consistent biological activities compared to their 5-fluoro counterparts, with the exception of one derivative, which showed acceptable activity against both C. krusei and C. albicans. The two derivatives featuring 5-chloro and 2-((4-(trifluoromethyl)phenyl)amino substituents proved to be highly effective against P. aeruginosa, making them promising candidates for further research. Aiming to elucidate the molecular interactions between the active compounds and their potential targets, molecular docking studies were conducted using AutoDock Vina 1.1.2. involving the most active compounds against P. aeruginosa.Conclusions: The biological effects of 2-monoamino or 2,4-diamino substitution as well as the effect of chloro or fluoro substitution at position 5 of the pyrimidine ring combined with the allo-gibberic acid moiety were determined. Compounds with selective antibacterial activity against P. aeruginosa as well as selective antifungal activity against C. krusei and C. albicans fungi were identified. Full article

Cellulose tosylate (MCC-Tos) is a key derivative for surface modification and a crucial precursor for cellulose compatibilization in click reactions, enabling its functionalization for advanced applications. Replacing tosyl groups with alkyne groups broadens cellulose’s potential in biocompatible reactions, such as thiol-yne click chemistry and protein/enzyme immobilization. To achieve this, we optimized the heterogeneous synthesis of MCC-Tos using a Doehlert matrix statistical design, evaluating the influence and interaction of the reaction conditions. The optimized conditions—144 h reaction time, 10:1 molar ratio, and 30 °C—yielded a degree of substitution for tosyl groups (DS_tos) of 1.80, determined via elemental analysis and FTIR-ATR spectroscopy. The reaction kinetics followed a first-order model. A subsequent reaction with propargylamine produced aminopropargyl cellulose (MCC-P_NH), reducing DS_tos by 65%, which was confirmed via FTIR, and improving thermal stability by a margin of 30 °C (TGA/DTG). ¹³C CP/MAS NMR confirmed the alkyne group attachment, further validated via coupling an azide-functionalized coumarin through copper(I)-catalyzed alkyne-azide cycloaddition (CuAAC). Fluorescence microscopy and UV spectroscopy were used to estimate a substitution degree of 0.21. This study establishes a feasible route for synthesizing alkyne-functionalized cellulose, paving the way for eco-friendly materials, including protein/enzyme bioconjugates, composites, and advanced materials via thiol-yne and CuAAC reactions. Full article

Since its conceptualization, click chemistry in all its variants has proven to be a superior synthesis protocol, compared to conventional methods, for forming new covalent bonds under mild conditions, orthogonally, and with high yields. If a term like reactive resilience could be established, click reactions would be good examples, as they perform better under increasingly challenging conditions. Particularly, highly hindered couplings that perform poorly with conventional chemistry protocols—such as those used to conjugate biomacromolecules (e.g., proteins and aptamers) or multiple drugs onto macromolecular platforms—can be more easily achieved using click chemistry principles, while also promoting high stereoselectivity in the products. In this review, three molecular platforms relevant in the field of nanomedicine are considered: polymers/copolymers, cyclodextrins, and fullerenes, whose functionalization poses a challenge due to steric hindrance, either from the intrinsic bulk behavior (as in polymers) or from the proximity of confined reactive sites, as seen in cyclodextrins and fullerenes. Their functionalization with biologically active groups (drugs or biomolecules), primarily through copper-catalyzed azide–alkyne cycloaddition (CuAAC), strain-promoted azide–alkyne cycloaddition (SPAAC), inverse electron-demand Diels–Alder (IEDDA) and thiol–ene click reactions, has led to the development of increasingly sophisticated systems with enhanced specificity, multifunctionality, bioavailability, delayed clearance, multi-targeting, selective cytotoxicity, and tracking capabilities—all essential in the field of nanomedicine. Full article

In this work, a Pd(II)-C,N-cyclometalated complex was grafted to polysiloxanes via azide–alkyne cycloaddition. The obtained polymer–metal complex (Pd-PDMS) acts as a catalyst in the Suzuki–Miyaura reaction. Pd-PDMS was drop-casted onto a carbon fiber support, and the resulting membrane demonstrated catalytic activity in the cross-coupling reaction without yield loss after several catalytic cycles. The catalytic membrane allows for easy catalyst recycling and provides ultra-low palladium levels in Suzuki–Miyaura reaction products. Full article

Background: The incorporation of radionuclides into peptides and larger biomolecules requires efficient and sometimes biorthogonal reaction conditions, to which click chemistry provides a convenient approach. Methods: Traditionally, click-based radiolabeling techniques have focused on classical click chemistry, such as copper(I)-catalyzed alkyne-azide [3+2] cycloaddition (CuAAC), strain-promoted azide-alkyne [3+2] cycloaddition (SPAAC), traceless Staudinger ligation, and inverse electron demand Diels–Alder (IEDDA). Results: However, newly emerging click-based radiolabeling techniques, including tyrosine-click, sulfo-click, sulfur(VI) fluoride exchange (SuFEx), thiol-ene click, azo coupling, hydrazone formations, oxime formations, and RIKEN click offer valuable alternatives to classical click chemistry. Conclusions: This review will discuss the applications of these techniques in peptide radiochemistry. Full article

The transmembrane nitrate reductase (Nar) is the first enzyme in the dissimilatory alternate anaerobic nitrate respiratory chain in denitrifying bacteria. To date, there has been no real-time method to determine its specific activity embedded in its native membrane; here, we describe such a new method, which is useful with the inside-out membranes of Paracoccus denitrificans and other denitrifying bacteria. This new method takes advantage of the native coupling of the endogenous NADH dehydrogenase or Complex I with the reduction of nitrate by Nar through the quinone pool of the inner membranes of P. denitrificans. This is achieved under previously reached anaerobic conditions. Inner controls confirming the specific Nar activity determined by this new method were made by the total inhibition of the Nar enzyme by sodium azide and cyanide, well-known Nar inhibitors. The estimation of the Michaelis–Menten affinity of Nar for NO₃⁻ using this so-called Nar-JJ assay gave a K_m of 70.4 μM, similar to previously determined values. This new Nar-JJ assay is a suitable, low-cost, and reproducible method to determine in real-time the endogenous Nar activity not only in P. denitrificans, but in other denitrifying bacteria such as Brucella canis, and potentially in other entero-pathogenic bacteria. Full article

A targeted micellar formation of doxorubicin (Dox) and curcumin (Cur) was evaluated to enhance the efficacy and reduce the toxicity of these drugs in KG1a leukemic stem cells (LSCs) compared to EoL-1 leukemic cells. Dox-Cur-micelle (DCM) was developed to improve the cell uptake of both compounds in LSCs. Cur-micelle (CM) was produced to compare with DCM. DCM and CM were conjugated with two FLT3 (FMS-like tyrosine kinase)-specific peptides (CKR; C and EVQ; E) to increase drug delivery to KG1a via the FLT3 receptor (AML marker). They were formulated using a film-hydration technique together with a pH-induced self-assembly method. The optimal drug-to-polymer weight ratios for the DCM and CM formulations were 1:40. The weight ratio of Dox and Cur in DCM was 1:9. DCM and CM exhibited a particle size of 20–25 nm with neutral charge and a high %EE. Each micelle exhibited colloidal stability and prolonged drug release. Poloxamer 407 (P407) was modified with terminal azides and conjugated to FLT3-targeting peptides with terminal alkynes. DCM and CM coupled with peptides C, E, and C + E exhibited a higher particle size. Moreover, DCM-C + E and CM-C + E showed the highest toxicity in KG-1a and EoL-1 cells. Using two peptides likely improves the probability of micelles binding to the FLT3 receptor and induces cytotoxicity in leukemic stem cells. Full article

Inhibitors of monoamine oxidases (MAOs) are of interest for the treatment of neurodegenerative disorders and other human pathologies. In this frame, the present work describes different synthetic strategies to obtain MAO inhibitors via the coupling of the aminocoumarin core with arylsulfonyl chlorides followed by copper azide-alkyne cycloaddition, leading to coumarin–sulfonamide–nitroindazolyl–triazole hybrids. The nitration position on the coumarin moiety was confirmed through nuclear magnetic resonance spectroscopy and molecular electron density theory in order to elucidate the molecular mechanism and selectivity of the electrophilic aromatic substitution reaction. The coumarin derivatives were evaluated for their inhibitory potency against monoamine oxidases and cholinesterases. Molecular docking calculations provided a rational binding mode of the best compounds in the series with MAO A and B. The work identified hybrids 14a–c as novel MAO inhibitors, with a selective action against isoform B, of potential interest to combat neurological diseases. Full article

An efficient access to the novel 5-(aryl)amino-1,2,3-triazole-containing 2,1,3-benzothiadiazole derivatives has been developed. The method is based on 1,3-dipolar azide–nitrile cycloaddition followed by Buchwald–Hartwig cross-coupling to afford the corresponding N-aryl and N,N-diaryl substituted 5-amino-1,2,3-triazolyl 2,1,3-benzothiadiazoles under NHC-Pd catalysis. The one-pot diarylative Pd-catalyzed heterocyclization opens the straightforward route to triazole-linked carbazole-benzothiadiazole D-A systems. The optical and electrochemical properties of the compound obtained were investigated to estimate their potential application as emissive layers in OLED devises. The quantum yield of photoluminescence (PLQY) of the synthesized D-A derivatives depends to a large extent on electron-donating strengths of donor (D) component, reaching in some cases the values closed to 100%. Based on the most photoactive derivative and wide bandgap host material mCP, a light-emitting layer of OLED was made. The device showed a maximum brightness of 8000 cd/m² at an applied voltage of 18 V. The maximum current efficiency of the device reaches a value of 3.29 cd/A. Full article

Dendritic hydrogels based on carbosilane crosslinkers are promising drug delivery systems, as their amphiphilic nature improves the compatibility with poorly water-soluble drugs. In this work, we explored the impact of the complementary polymer on the amphiphilic properties of the dendritic network. Different polymers were selected as precursors, from the highly lipophilic propylene glycol (PPG) to the hydrophilic polyethylene glycol (PEG), including amphiphilic Pluronics L31, L35 and L61. The dithiol polymers reacted with carbosilane crosslinkers through UV-initiated thiol–ene coupling (TEC), and the resultant materials were classified as non-swelling networks (for PPG, PLU_L31 and PLU_L61) and high-swelling hydrogels (for PEG and PLU_L35). The hydrogels exhibited thermo-responsive properties, shrinking at higher temperatures, and exhibited an intriguing drug release pattern due to internal nanostructuring. Furthermore, we fine-tuned the dendritic crosslinker, including hydroxyl and azide pendant groups in the focal point, generating functional networks that can be modified through degradable (ester) and non-degradable (triazol) bonds. Overall, this work highlighted the crucial role of the amphiphilic balance in the design of dendritic hydrogels with thermo-responsive behavior and confirmed their potential as functional networks for biomedical applications. Full article

Glycidyl azide polymer (GAP)-based polyurethane is an ideal elastomeric matrix for high-energy, low-smoke, and insensitive solid propellants. As the skeleton structure of GAP propellants, changes in the structure and properties of GAP elastomers during aging lead to the deterioration of propellant performance (especially in relation to mechanical properties), which causes safety risks. A high-temperature-accelerated aging experiment (70 °C) on a GAP elastomer was conducted. The evolution of the microstructure of the GAP elastomer system was analyzed by Fourier-transform infrared spectroscopy (FTIR) and nuclear magnetic resonance spectroscopy (NMR), and variations in the macroscopic properties were analyzed by the hardness test and the uniaxial tensile test. The experimental results showed that thermal aging of the GAP elastomer is a coupled process of multiple chemical reactions. The azide groups, urethane groups, and ether bonds were the weak links in the network structure, breaking during the aging process, and the crosslinking density rose and then decreased. Macroscopic properties also showed segmented changes. The aging process was divided into three stages: post-curing (stage one); when the crosslinked network began to break (stage two), and when the crosslinked network was destroyed (stage three). Changes in the microstructure and macroscopic properties were consistent. This work is of great significance for exploring the aging mechanism of GAP propellants and extending their storage life. Full article