Search Results (15)

In this paper, we report the details of the synthesis, single crystal X-ray diffraction study, comparative crystal chemical analysis, and magnetic behavior of a new phosphate variation of the arsenate mineral zubkovaite. The title compound was obtained as a high-temperature flux product in the form of a partly ordered solid solution and was studied using scanning electron microscopy and microprobe analysis. It possesses a monoclinic symmetry with a P2₁/n space group; the unit cell parameters are a = 8.8040 (2), b = 4.8970 (1), c = 14.5772 (3), and β = 93.993(2)°. The Ca_2.62Cu_1.94Co_1.44(PO₄)₄ crystal structure exhibits some statistical disorder. Our refinement showed that two positions are mixed, being occupied by Cu/Co (M1) and Ca/Co (M2) atoms. Two types of layers that are nearly parallel to the (101) plane can be distinguished in the structure. One of them is built by sharing corners of CuO₄ squares, M1O₅ square pyramids, and PO₄ tetrahedra. The second type of layer formed from Ca²⁺- and M2⁺-centered polyhedra alternates in the [$\overline{1}$01] direction to construct a tri-periodic framework. Ca_2.62Cu_1.94Co_1.44(PO₄)₄ experiences long-range antiferromagnetic ordering at low temperatures, as evidenced by both dc— and ac—magnetic susceptibilities, as well as by the specific heat measurements. Full article

Diabetic kidney disease (DKD), a well-characterized microvascular complication associated with the progression of diabetes mellitus, has been identified as the leading etiological factor contributing to the global burden of end-stage kidney disease (ESKD). Historically, DKD research has predominantly centered on glomerular mechanisms; however, recent studies have increasingly emphasized the critical role of tubular dysfunction. Extensive evidence has elucidated the key pathological drivers of tubular injury in DKD, encompassing metabolic dysregulation, pro-inflammatory signaling pathways, diverse cellular stress responses, and epithelial–mesenchymal transition (EMT). Furthermore, emerging mechanistic studies reveal that autophagic flux impairment and epigenetic memory formation collaboratively drive cellular senescence in DKD. Regarding the treatment of DKD, various hypoglycemic drugs, as well as hypotensive drugs, and microcirculatory improvers have garnered significant attention. Recently, stem cell-based interventions and precision gene editing techniques have unveiled novel therapeutic paradigms for DKD, fundamentally expanding the treatment arsenal beyond conventional pharmacotherapy. This review synthesizes updated insights into the pathogenesis of tubular injury in DKD and highlights promising therapeutic strategies for managing this condition. Full article

Potential toxic elements (PTEs), including Pb, Cr, Cd, Ni, Cu, As, and Mo, are common pollutants in ion-adsorption rare earth mines (IAREEMs), and atmospheric deposition is an important method of PTE migration. However, the level of PTE atmospheric deposition in and around IAREEMs remains unknown. We established 25 stations at typical sites in the Ganzhou city of southeast China. An exposure assessment model was used to evaluate the health risks for adults and children. The results show that the concentration and fluxes of atmospheric deposition of PTEs follow the order of Pb > Cu > Cr > Ni > As > Mo > Cd, and most PTEs present no human health risk. However, due to the high toxicty of As, it poses both carcinogenic and non-carcinogenic risks to children as indicated by the analysis of an exposure assessment model of heavy rare earth minerals in Longnan county, Ganzhou city. The As concentration in atmospheric deposition ranged from 3.18 to 251.87 mg kg⁻¹, and the As atmospheric fluxes in atmospheric deposition ranged from 0.11 to 39.4 mg m⁻² y⁻¹. This is because As-rich materials (e.g., arsenic-adsorbing clay zones and chernovite-(Y) (Y[AsO₄])) are exposed in fully weathered layers, and the formed suspended particulate matter is transported into the atmosphere at Longnan county. Consequently, restoring vegetation to reduce particulate matter transport is an important method for controlling the spread of pollutants. These results provide significant insights into pollution characteristics and prevention in and around mining areas under the influence of atmospheric deposition. Full article

Evaporating a liquid sessile drop deposited on a horizontal surface is an important object of applications (printing technologies, electronics, sensorics, medical diagnostics, hydrophobic coatings, etc.) and theoretical investigations (microfluidics, self-assembly of nanoparticles, crystallization of solutes, etc.). The arsenal of formulas for calculating the slow evaporation of an axisymmetric drop of capillary dimensions deposited on a flat solid surface is reviewed. Characteristics such as vapor density, evaporation flux density, and total evaporation rate are considered. Exact solutions obtained in the framework of the Maxwellian model, in which the evaporation process of the drop is limited by vapor diffusion from the drop surface to the surrounding air, are presented. The summary covers both well-known results obtained during the last decades and new results published by us in the last few years, but practically unknown to the wider scientific community. The newest formulas, not yet published in refereed publications, concerning exact solutions for a number of specific contact angles are also presented. In addition, new approximate solutions are presented (total evaporation rate and mass loss per unit surface area per unit time in the whole range of contact angles $\theta \in [0, \mathsf{\pi })$, drop lifetime in constant contact radius evaporation regime and constant contact angle mode), which can be used in modeling without requiring significant computational resources. Full article

In the last twenty-five years, extensive work has been done on ion exchange membrane bioreactors (IEMB) combining Donnan dialysis and anaerobic reduction to remove trace oxyanions (e.g., perchlorate, nitrate, chlorate, arsenate) from contaminated water sources. Most studies used Donnan dialysis contactors with high recirculation rates on the feed side, so under continuous operation, the effective concentration on the feed side of the membrane is the same as the exit concentration (CSTR mode). We have built, characterized, and modelled a plug flow Donnan dialysis contactor (PFR) that maximizes concentration on the feed side and operated it on feed solutions spiked with perchlorate and nitrate ion using ACS and PCA-100 anion exchange membranes. At identical feed inlet concentrations with the ACS membrane, membrane area loading rates are three-fold greater, and fluxes are more than double in the PFR contactor than in the CSTR contactor. A model based on the nonlinear adsorption of perchlorate in ACS membrane correctly predicted the trace ion concentration as a function of space-time in experiments with ACS. For PCA membrane, a linear flux dependence on feed concentration correctly described trace ion feed concentration as a function of space-time. Anion permeability for PCA-100 was high enough that the overall mass transfer was affected by the film boundary layer resistance. These results provide a basis for efficiently scaling up Donnan dialysis contactors and incorporating them in full-scale IEMB setups. Full article

High-arsenic water limits the utilization and development of water resources in Tibet, and high-arsenic groundwater is one of the major sources of arsenic input to surface water in the area. In this work, the characteristics of groundwater and the source and formation of arsenic in a typical watershed in Tibet (the lower tributaries of the Angqu River) were investigated using systematic surveys, ionic ratios, Gibbs diagrams, in combination with isotopic and heat storage calculation methods. The studies show that the chemical composition of the water in the study area is mainly determined by the rock weathering of carbonate and silicate rocks. The average recharge elevation levels of hot spring water are 4874.1 m, 4058.1 m, and 4745.0 m, respectively. Deep hot water is the main source of arsenic in the spring water, and its arsenic flux accounts for 98.44–99.77% of the measured flux in the spring water. Full article

Arsenic content in copper concentrates is continuously increasing worldwide. It is desirable to remove arsenic from copper in the earlier stages of copper making due to the deposition of arsenic to cathode copper during the electrorefining process. Effects of temperature, flux, and oxygen on the distribution of arsenic during copper converting and fire refining processes were studied using FactSage 8.2. The results showed that arsenic can be effectively removed by proper selection of converting and refining slags. The decrease in Fe/SiO₂ or Fe/CaO ratio in the converting slag is favorable for arsenic distributed to slag. CaO is more effective than SiO₂ in decreasing the liquidus temperature of the slag and arsenic content in the blister copper during the converting process. Na₂O or CaO as a flux is effective to remove arsenic in the fire refining process. Full article

The combined use of non-invasive on-site portable techniques, Raman microscopy, and X-ray fluorescence spectroscopy on seven imperial bowls and two decorated dishes, attributed to the reigns of the Kangxi, Yongzheng, Qianlong, and Daoguang emperors (Qing Dynasty), allows the identification of the coloring agents/opacifiers and composition types of the glazes and painted enamels. Particular attention is paid to the analysis of the elements used in the (blue) marks and those found in the blue, yellow, red, and honey/gilded backgrounds on which, or in reserve, a floral motif is principally drawn. The honey-colored background is made with gold nanoparticles associated with a lead- and arsenic-based flux. One of the red backgrounds is also based on gold nanoparticles, the second containing copper nanoparticles, both in lead-based silicate enamels like the blue and yellow backgrounds. Tin and arsenic are observed, but cassiterite (SnO₂) is clearly observed in one of the painted decors (dish) and in A676 yellow, whereas lead (calcium/potassium) arsenate is identified in most of the enamels. Yellow color is achieved with Pb-Sn-Sb pyrochlore (Naples yellow) with various Sb contents, although green color is mainly based on lead-tin oxide mixed with blue enamel. The technical solutions appear very different from one object to another, which leads one to think that each bowl is really a unique object and not an item produced in small series. The visual examination of some marks shows that they were made in overglaze (A608, A616, A630, A672). It is obvious that different types of cobalt sources were used for the imprinting of the marks: cobalt rich in manganese for bowl A615 (Yongzheng reign), cobalt rich in arsenic for bowl A613 (but not the blue mark), cobalt with copper (A616), and cobalt rich in arsenic and copper (A672). Thus, we have a variety of cobalt sources/mixtures. The high purity of cobalt used for A677 bowl indicates a production after ~1830–1850. Full article

Strontium (Sr), hydrogen (H) and oxygen (O) in vent fluids are important for understanding the water–rock interaction and hydrothermal flux in hydrothermal systems. We have analyzed the Sr, H and O isotopic compositions of seawater, vent fluid and hydrothermal plume samples in the Kueishantao hydrothermal field, as well as their calcium (Ca), total sulfur (S), Sr, arsenic (As), stibium (Sb), chlorine (Cl) and manganese (Mn) concentrations for understanding the origin and processes of fluids. The results suggest that most As, Sb and Mn are leached from andesitic rocks into the fluids, and most Ca and Cl remained in the deep reaction zone during the fluid–andesitic rock interaction. The ranges of ⁸⁷Sr/⁸⁶Sr, δD_V-SMOW and δ¹⁸O_V-SMOW values in the yellow spring, white spring and plumes are small. The ⁸⁷Sr/⁸⁶Sr, δD_V-SMOW and δ¹⁸O_V-SMOW values of fluids and plumes are like those of ambient seawater, indicating that the Sr, H and O of vent fluids and hydrothermal plumes are derived primarily from seawater. This suggests that the interaction of andesite and subseafloor fluid is of short duration and results in the majority of As, Sb and Mn being released into fluids, while most Ca and Cl remained in the deep reaction zone. In addition, there was no significant variation of Sr, H and O isotopic compositions in the upwelling fluid, keeping the similar isotopic compositions of seawater. There are obvious correlations among the pH values, As and Sb concentrations, and H isotopic compositions of the vent fluids and hydrothermal plumes, implying that the As and Sb concentrations and H isotopic compositions can trace the dispersion of plumes in the ambient seawater. According to the Sr concentrations and ⁸⁷Sr/⁸⁶Sr values, the water/rock ratios are 3076~8124, which is consistent with the idea that the interaction between fluid and andesite at the subseafloor is of short duration. The hydrothermal flux of Sr discharged from the yellow spring into the seawater is between 2.06 × 10⁴ and 2.26 × 10⁴ mol/yr, and the white spring discharges 1.18 × 10⁴~1.26 × 10⁴ mol/yr Sr if just andesites appear in the reaction zone. Full article

In this work, the effects of arsenic (As) flux used during gallium (Ga) seed droplet consumption and the post-growth annealing on the optical, electrical, and microstructural properties of self-catalyzed molecular beam epitaxially grown tellurium (Te)-doped GaAs nanowires (NWs) have been investigated using a variety of characterization techniques. NWs using the same amount of As flux for growth of the seed droplet consumption demonstrated reduced density of stacking faults at the NW tip, with four-fold enhancement in the 4K photoluminescence (PL) intensity and increased single nanowire photocurrent over their higher As flux droplet consumption counterparts. Post-growth annealed NWs exhibited an additional low-energy PL peak at 1.31 eV that significantly reduced the overall PL intensity. The origin of this lower energy peak is assigned to a photocarrier transition from the conduction band to the annealing assisted Te-induced complex acceptor state (Te_AsV_Ga⁻). In addition, post-growth annealing demonstrated a detrimental impact on the electrical properties of the Te-doped GaAs NWs, as revealed by suppressed single nanowire (SNW) and ensemble NW photocurrent, with a consequent enhanced low-frequency noise level compared to as-grown doped NWs. This work demonstrates that each parameter in the growth space must be carefully examined to successfully grow self-catalyzed Te-doped NWs of high quality and is not a simple extension of the growth of corresponding intrinsic NWs. Full article

This study investigated the influence of dope extrusion rate (DER) and post-treatment effect on the morphology, permeation, and metal ion rejection by polyethersulfone/lithium bromide (PES/LiBr)-based hollow fiber (HF) membranes. HF fibers were spun with 2.25, 2.5, and 3.1 ratios of DER to bore fluid rate (BFR), wherein DER varied from 11.35, 12.5, to 15.6 mL/min with a fixed BFR (5 mL/min). Molecular weight cutoff (MWCO), pore size, water flux, and flux recovery ratio were determined, whereas lake water was used to observe the rejection rate of dissolved metallic ions. Results showed that with the increase of the DER wall thickness (WT), HFs increased from 401.5 to 419.5 um, and furthermore by the post-treatments up to 548.2 um, as confirmed by field emission scanning electron microscope (FESEM) analysis. Moreover, MWCO, pore size, and the pure water permeation (PWP) of the HF membranes decreased, while the separation performance for polyethylene glycol (PEG) solute increased with increasing DER. Post-treated HFs from 11.35 mL/min of DER showed 93.8% of MWCO value with up to 90% and 70% rejection of the arsenic and chromium metallic ions, respectively, in comparison with all other formulated HFs. Full article

A comprehensive study of the environmental radioactivity covered in a distance up to 20 km from a point source—two stacks of a coal-fired power plant. Airborne particulate matter was collected, and the element composition on the 30 cm soil profile was determined. The range of activity concentrations of ²²⁶Ra, ²³²Th and ⁴⁰K from the studied areas varies from 8 Bq/kg to 41 Bq/kg, 5 to 72 Bq/kg and 62 to 795 Bq/kg, respectively. The activities values are increased by 44% for ²²⁶Ra, 37% for ⁴⁰K, and 75% for ²³²Th in the prevailing wind direction. For some elements, the respective concentration in the soil is above the maximum permissible level for all types of soil use, particularly for the arsenic concentration. The deposition flux ranged from 0.36 to 5.70 (g m⁻² per month) in the first sampling campaign and from 0.02 to 3.10 (g m⁻² per month) for the second sampling campaign. Maps on the spatial distribution of gamma dose rates, radionuclides activity concentrations, deposition flux and trace metals in topsoil were developed for the study region. These maps are in accordance with higher values in specific locations in the vicinity of the coal-fired power plant, showing the influence of point sources, and for locations within 6 and 20 km from the stacks, particularly in the prevailing wind direction. Full article

Modern and future nanoelectronic and nanophotonic applications require precise control of the size, shape and density of III-V quantum dots in order to predefine the characteristics of devices based on them. In this paper, we propose a new approach to control the size of nanostructures formed by droplet epitaxy. We reveal that it is possible to reduce the droplet volume independently of the growth temperature and deposition amount by exposing droplets to ultra-low group-V flux. We carry out a thorough study of the effect of arsenic pressure on the droplet characteristics and demonstrate that indium droplets with a large initial size (>100 nm) and a low surface density (<10⁸ cm⁻²) are able to shrink to dimensions appropriate for quantum dot applications. Small droplets are found to be unstable and difficult to control, while larger droplets are more resistive to arsenic flux and can be reduced to stable, small-sized nanostructures (~30 nm). We demonstrate the growth conditions under which droplets transform into dots, ring and holes and describe a mechanism of this transformation depending on the ultra-low arsenic flux. Thus, we observe phenomena which significantly expand the capabilities of droplet epitaxy. Full article

As one of the major sources of pollutions in the environments, effluents from municipal wastewater recently became a hot topic. This study quantified monthly county-level releases of five heavy metals, i.e., lead (Pb), cadmium (Cd), chromium (Cr), arsenic (As), and mercury (Hg), from municipal wastewater into the environment in the Heilongjiang Province of China, based on sampling, measurement, and modeling tools. Wastewater samples were collected from 27 municipal wastewater treatment plants (MWTPs) in 15 county-level cities of Heilongjiang every month from 2015 to 2017. The concentrations of five heavy metals were analyzed in both influents (Pb: 160 ± 100 μg/L; Cd: 15 ± 9.0 μg/L; Cr: 170 ± 64 μg/L; Hg: 0.67 ± 1.5 μg/L; As: 6.2 ± 4.8 μg/L) and effluents (Pb: 45 ± 15 μg/L; Cd: 5.2 ± 5.1 μg/L; Cr: 57 ± 13 μg/L; Hg: 0.28 ± 0.12 μg/L; As: 2.6 ± 1.4 μg/L). The removal ratios of the five heavy metals ranged from 50% to 67%. Inflow fluxes of Pb, Cr, and Cd displayed increasing trends first then decreased after reaching a maximum value, whereas those of Hg and Pb remained stable. Material flow analysis reveals that constructions of MWTPs are conducive to significantly reduce the releases of heavy metals from urban areas into the aquatic environment in the study area. Additionally, municipal wastewater sludge (used as fertilizer or spread on the land) could be a significant source of heavy metals in the land. Full article

NRF2 (NF-E2 p45-related factor 2) orchestrates cellular adaptive responses to stress. Its quantity and subcellular location is controlled through a complex network and its activity increases during redox perturbation, inflammation, growth factor stimulation, and energy fluxes. Even before all-trans retinoic acid (ATRA) treatment era it was a common experience that acute promyelocytic leukemia (APL) cells are highly sensitive to first line chemotherapy. Since we demonstrated how high doses of ascorbate (ASC) preferentially kill leukemic blast cells from APL patients, we aimed to define the underlying mechanism and found that promyelocytic leukemia/retinoic acid receptor α (PML/RARa) inhibits NRF2 function, impedes its transfer to the nucleus and enhances its degradation in the cytoplasm. Such loss of NRF2 function alters cell metabolism, demarcating APL tissue from both normal promyelocytes and other acute myeloide leukemia (AML) blast cells. Resistance to ATRA/arsenic trioxide (ATO) treatment is rare but grave and the metabolically-oriented treatment with high doses of ASC, which is highly effective on APL cells and harmless on normal hematopoietic stem cells (HSCs), could be of use in preventing clonal evolution and in rescuing APL-resistant patients. Full article