Search Results (100)

Food contaminants, including harmful microbes, pesticide residues, heavy metals and illegal additives, pose significant public health risks. While traditional detection methods are effective, they are often slow and require complex equipment, which limits their application in real-time monitoring and rapid response. Surface-enhanced Raman scattering (SERS) technology has gained widespread use in related research due to its hypersensitivity, non-destructibility and molecular fingerprinting capabilities. In recent years, Au-Ag bimetallic nanoparticles (Au-Ag BNPs) have emerged as novel SERS substrates, accelerating advancements in SERS detection technology. Au-Ag BNPs can be classified into Au-Ag alloys, Au-Ag core–shells and Au-Ag aggregates, among which the Au-Ag core–shell structure is more widely applied. This review discusses the types, synthesis methods and practical applications of Au-Ag BNPs in food contaminants. The study aims to provide valuable insights into the development of new Au-Ag BNPs and their effective use in detecting common food contaminants. Additionally, this paper explores the challenges and future prospects of SERS technology based on Au-Ag BNPs for pollutant detection, including the development of functional integrated substrates, advancements in intelligent algorithms and the creation of portable on-site detection platforms. These innovations are designed to streamline the detection process and offer guidance in selecting optimal sensing methods for the on-site detection of specific pollutants. Full article

Hydrogen peroxide (H₂O₂) is an important industrial chemical that is widely applied in many areas. The direct synthesis of H₂O₂ from H₂ and O₂ has proved to be a green and economic pathway. Pd-based bimetallic catalysts, due to their superior catalytic performances in this reaction, have attracted intensive attention. Herein, Tetrakis(hydroxymethyl)phosphonium chloride (THPC) was adopted as the protective ligand to immobilize Pd-Au alloy nanoparticles onto activated carbon (AC). The varied Pd/Au molar ratios demonstrated homogeneously distributed Pd-Au nanoalloys with average particle sizes ranging from 3.51 to 5.75 nm. The optimal ratio was observed over the Pd₃Au₁/AC-THPC catalyst with a maximum H₂O₂ productivity of 165 mol/(kg_Pd·h) and selectivity of 82.3% under ambient pressure. The relationship between the electronic structure and catalytic activity indicated Pd⁰ was the active site, while the presence of Au inhibited H₂O₂ degradation rate. This research could help in the design efficient bimetallic catalysts for the direct synthesis of H₂O₂. Full article

This report introduces a high-performance bimetallic electrocatalyst for the oxygen reduction reaction (ORR) featuring a 20 wt.% platinum content. The PtCu-based catalyst combines de-alloyed nanoparticles (NPs) supported on nitrogen-doped carbon. Enhanced uniformity in NP distribution significantly boosts the catalyst performance. Nitrogen-doped carbon provides active centers for NP deposition, which is confirmed by HAADF-STEM and EDX. The PtCu/CN catalyst achieves over 5.6 times the ORR mass activity and two times the stability under pulse cycling compared to commercial Pt/C. Uniquely, the study examines bimetallic NPs and local nano-sites before and after stress testing using IL-TEM. In situ analysis of PtCu/CN microstructure revealed two primary degradation mechanisms, (i) partial dissolution of NPs and (ii) NP agglomeration, with the C–N support significantly mitigating these effects through strong NP–support interactions. The findings underscore the prospects of bimetallic PtCu catalysts with nitrogen-doped support by showcasing exceptional ORR activity and durability. Full article

As cyanide ion (CN⁻), an ecologically harmful pollutant, has received incessant attention with growing industrialization on a global scale, the capability of on-site monitoring of CN⁻ contamination becomes increasingly crucial. In this work, we have fabricated a simplistic plasmonic-sensing platform for CN⁻, which can be combined with the human naked eye for visual monitoring. The main sensor part consisted of β-Cyclodextrin (β−CD)-decorated gold-rich silver bimetallic alloy nanoparticles (β−CD-Ag/Au-rich alloy NPs), while a sensing analysis was performed by a spectrophotometer or smartphone, where optical data gathered by its camera were analyzed by RGB color sensing. Upon the introduction of various CN⁻ quantities into β−CD-Ag/Au-rich alloy NPs, the spectral peak of the surface plasmon resonance (SPR) shifted from 488 nm to 496 nm. This redshift indicated a strong etching reaction between alloy NPs and CN⁻, demonstrating a ultrahigh detection sensitivity, i.e., a limit of detection (LOD) of 0.24 nM. During the formation of metal-cyano complexes in the CN⁻-induced etching response of β−CD-Ag/Au-rich alloy NPs, we observed a naked-eye discernible color change from brownish-red to colorless, allowing for naked-eye monitoring. The smartphone could also analyze the colorimetric response for such an etching process via RGB color sensing, demonstrating a LOD of 1.35 nM, being still less than the maximum concentration (1.91 nM) in drinking water, which is allowable by the World Health Organization (WHO). The straightforwardness and very high sensitivity of the proposed technique for CN⁻ detection using alloy nanoparticles with a smartphone may hold promise for simplistic, affordable in-field examinations of CN⁻ in water. Full article

The design of efficient and cost-effective electrocatalysts to replace Pt in an oxygen reduction reaction (ORR) is crucial for advancing proton exchange membrane fuel cell (PEMFC) technologies. This study synthesized Pd-Co bimetallic alloy nanoparticles supported on reduced graphene oxide (rGO) through a simple chemical-reduction method, making it suitable for low-cost, large-scale fabrication and significantly reducing the need for Pt. The nanostructures were systematically characterized using various analytical techniques, including X-ray diffraction (XRD), high-resolution transmission electron microscopy (HR-TEM), energy-dispersive X-ray spectroscopy (EDX), and cyclic voltammetry (CV). Electrochemical investigations revealed that the Pd-Co/rGO catalyst exhibits remarkable ORR performance in an alkaline environment, with an electrode-area-normalized activity rivaling that of the commercial Pt/C catalyst. Remarkably, Pd-Co/rGO demonstrated an onset potential (E_onset) of 0.944 V (vs. RHE) and a half-wave potential (E_1/2) of 0.782 V (vs. RHE), highlighting its excellent ORR activity. Furthermore, the Pd-Co/rGO catalyst displayed superior methanol-tolerant ORR activity, outperforming Pt/C and monometallic Pd/rGO and Co/rGO systems. The enhanced electrocatalytic performance is attributed to the smallest size, consistent shape, and good dispersion of the alloy structure on the RGO surface. These findings establish Pd-Co/rGO as a promising alternative to Pt-based catalysts, addressing key challenges such as methanol crossover while advancing PEMFC technology in alkaline media. Full article

Coal fly ash zeolites with Sodalite structure were synthesized by ultrasound-assisted double stage fusion-hydrothermal synthesis. Monometallic Ni and bimetallic Ni–Cu supported catalysts with 5 wt.% Ni and different copper contents of 1.5, 2.5 and 5.0 wt.% Cu were prepared by post-synthesis incipient wetness impregnation. The catalysts were characterized by X-ray powder diffraction, N₂ physisorption, transmission electron microscopy (TEM), Mössbauer spectroscopy and H₂ temperature programmed reduction analysis. It was found that crystalline Cu⁰ and Ni_xCu_y intermetallic nanoparticles were formed in the reduced powder and 3D printed catalysts and that they affected the reducibility of the catalytically active nickel phase. Three-dimensionally printed 5Ni2.5Cu/Sodalite catalysts were prepared via modification with metals before and after 3D printing for comparative studies. The powder and 3D printed catalysts were studied in the lignocellulosic biomass-derived levulinic acid (LA) to γ-valerolactone (GVL). The formation of NiCu alloy, which is found on the powder and 3D printed catalysts, favors their catalytic performance in the studied reaction. In contrast with powder catalysts, the preservation of the Sodalite structure was detected for all 3D printed samples and was found to have a positive influence on the metal dispersion registered in the 3D spent catalysts. The powder 5Ni2.5Cu/Sodalite catalyst showed the highest LA conversion and high GVL yield at 150 °C reaction temperature. Three-dimensionally printed catalysts show more stable catalytic activity than powder catalysts due to the preservation of the zeolite structure and metal dispersion. Full article

Hydrogenation of levulinic acid (LA) represents a significant approach for producing the high-value biomass-based platform compound γ-valerolactone (GVL). In this study, an efficient RuIr alloy bimetallic catalyst supported on SiC was synthesized and applied for the aqueous hydrogenation of LA into GVL under mild conditions. The RuIr/SiC catalyst exhibited high LA conversion and GVL selectivity (both > 99%) in water at 0.2 MPa H₂ pressure and 25 °C. The excellent performance is attributed to the synergistic interaction between Ru and Ir nanoparticles on the semiconducting SiC support. Furthermore, the catalytic activity of the RuIr/SiC alloy remained basically unchanged after five cycles, confirming the high stability of the bimetallic alloy catalyst. Full article

Upgrading the bio-derived platform chemical 5-hydroxymethylfurfural (HMF) into the high value-added bioplastic monomer 2,5-furandicarboxylic acid (FDCA) is a promising pathway for biomass conversion. In this work, the natural and abundant available mineral vermiculite was employed as a carrier for loading a Au-Pd bimetal catalyst. Due to the high dispersion of bimetallic nanoparticles, this synthesized vermiculite-supported Au-Pd bimetal catalyst revealed excellent catalytic performance for the aerobic oxidation of HMF to FDCA. By adjusting the ratio of Au and Pd metals, the catalytic performance of the catalyst can be optimized. Finally, 100% HMF conversion and 99.9% FDCA yield could be obtained under the conditions of Au/Pd = 2/1, 2 h, 2 MPa O_2, and 100 °C. The catalyst revealed good stability, and the FDCA yield can be maintained at 90.1% after five recycle usages. The physicochemical properties of the synthesized catalysts were characterized by various characterization methods. It could be concluded that the high dispersion and alloying effect of bimetallic nanoparticles promoted the activation of reactants and intermediates, resulting in the effective production of FDCA. This study could provide ideas and references for the development and utilization of natural minerals and also offer a new way to realize the efficient conversion of HMF to FDCA under green conditions. Full article

Zeolites with different structures (P1, sodalite, and X) were synthesized from coal fly ash by applying ultrasonically assisted hydrothermal and fusion–hydrothermal synthesis. Bimetallic catalysts, containing 5 wt.% Ni and 2.5 wt.% Cu, supported on the zeolites, were prepared by a post-synthesis incipient wetness impregnation method. The catalysts were characterized by X-ray powder diffraction (XRPD), N₂ physisorption, transmission electron microscopy (TEM), Mössbauer and X-ray photoelectron spectroscopies (XPS), and H₂–temperature-programmed reduction (H₂-TPR) analyses. The XRPD results showed that crystalline Cu⁰ and Ni_xCu_y intermetallic nanoparticles were formed in the reduced catalysts. The presence of the intermetallic phase affected the reducibility of the nickel by shifting it to a lower temperature, as confirmed by the H₂-TPR curves. Based on the Mössbauer spectroscopic results, it was established that the iron contamination of the coal fly ash zeolites (CFAZs) was distributed in ionic positions of the zeolite lattice and as a finely dispersed iron oxide phase on the external surface of the supports. The formation of the NiFe alloy, not detectable by XRPD, was also evidenced on the impregnated samples. The catalysts were studied in the upgrading of levulinic acid (LA), derived from lignocellulosic biomass, to γ-valerolactone (GVL), in a batch reactor under 30 bar H₂ pressure at 150 and 200 °C, applying water as a solvent. The NiCu/SOD and NiCu/X catalysts showed total LA conversion and a high GVL yield (>75%) at a reaction temperature of 200 °C. It was found that the textural parameters of the catalysts have less influence on the catalytic activity, but rather the stable dispersion of metals during the reaction. The characterization of the spent catalyst found the rearrangement of the support structure. The high LA conversion and GVL yield can be attributed to the weak acidic character of the support and the moderate hydrogenation activity of the Ni-Cu sites with high dispersion. Full article

X-ray absorption fine structure (XAFS) spectroscopy, temperature-programmed reduction (TPR), and temperature-programmed hydride decomposition (TPHD) were employed to elucidate the structures of a series of PdRe/Al₂O₃ bimetallic catalysts for the selective hydrogenation of furfural. TPR evidenced low-temperature Re reduction in the bimetallic catalysts consistent of the migration of [ReO₄]⁻ (perrhenate) species to hydrogen-covered Pd nanoparticles on highly hydroxylated γ-Al₂O₃. TPHD revealed a strong suppression of β-PdH_x formation in the reduced catalysts prepared by (i) co-impregnation and (ii) [HReO₄] impregnation of the reduced Pd/Al₂O₃, indicating the formation of Pd-rich alloy nanoparticles; however, reduced catalysts prepared by (iii) [Pd(NH₃)₄]²⁺ impregnation of calcined Re/Al₂O₃ and subsequent re-calcination did not. Re L_III X-ray absorption edge shifts were used to determine the average Re oxidation states after reduction at 400 °C. XAFS spectroscopy and high-angle annular dark field (HAADF)-scanning transmission electron microscopy (STEM) revealed that a reduced 5 wt.% Re/Al₂O₃ catalyst contained small Re clusters and nanoparticles comprising Re atoms in low positive oxidation states (~1.5+) and incompletely reduced Re species (primarily Re⁴⁺). XAFS spectroscopy of the bimetallic catalysts evidenced Pd-Re bonding consistent with Pd-rich alloy formation. The Pd and Re total first-shell coordination numbers suggest that either Re is segregated to the surface (and Pd to the core) of alloy nanoparticles and/or segregated Pd nanoparticles are larger than Re nanoparticles (or clusters). The Cowley short-range order parameters are strongly positive indicating a high degree of heterogeneity (clustering or segregation of metal atoms) in these bimetallic catalysts. Catalysts prepared using the Pd(NH₃)₄[ReO₄]₂ double complex salt (DCS) exhibit greater Pd-Re intermixing but remain heterogeneous on the atomic scale. Full article

Metallic nanoparticles have gained attention in technological fields, particularly photonics. The creation of silver/gold (Ag/Au) alloy NPs upon laser exposure of an assembly of these NPs was described. First, using the Nd: YAG pulsed laser ablation’s second harmonic at the same average power and exposure time, Ag and Au NPs in distilled water were created individually. Next, the assembly of Ag and Au NP colloids was exposed again to the pulsed laser, and the effects were examined at different average powers and exposure times. Furthermore, Ag/Au alloy nanoparticles were synthesized with by raising the average power and exposure time. The absorption spectrum, average size, and shape of alloy NPs were obtained by using an ultraviolet-visible (UV–Vis) spectrophotometer and transmission electron microscope instrument. Ag/Au alloy NPs have been obtained in the limit of quantum dots (<10 nm). The optical band gap energies of the Ag/Au alloy colloidal solutions were assessed for different Ag/Au alloy NP concentrations and NP sizes as a function of the exposure time and average power. The experimental data showed a trend toward an increasing bandgap with decreasing nanoparticle size. The nonlinear optical characteristics of Ag/Au NPs were evaluated and measured by the Z-scan technique using high repetition rate (80 MHz), femtosecond (100 fs), and near-infrared (NIR) (750–850 nm) laser pulses. In open aperture (OA) Z-scan measurements, Ag, Au, and Ag/AuNPs present reverse saturation absorption (RSA) behavior, indicating a positive nonlinear absorption (NLA) coefficient. In the close-aperture (CA) measurements, the nonlinear refractive (NLR) indices (n₂) of the Ag, Au, and Ag/Au NP samples were ascribed to the self-defocusing effect, indicating an effective negative nonlinearity for the nanoparticles. The NLA and NLR characteristics of the Ag/Au NPs colloids were found to be influenced by the incident power and excitation wavelength. The optical limiting (OL) effects of the Ag/Au alloy solution at various excitation wavelengths were studied. The OL effect of alloy NPs is greater than that of monometallic NPs. The Ag/Au bimetallic nanoparticles were found to be more suitable for optical-limiting applications. Full article

The orderings of atoms in bimetallic 1.6–2.1 nm-large CuCo nanoparticles, important as catalytic and magnetic materials, were studied using a combination of DFT calculations with a topological approach. The structure and magnetism of Cu₅₀Co₁₅₁, Cu₁₀₁Co₁₀₀, Cu₁₅₁Co₅₀, and Cu₃₀₃Co₁₀₂ nanoparticles; their resistance to disintegrating into separate Cu and Co species; as well as the exposed surface sites, were quantified and analyzed, showing a clear preference for Cu atoms to occupy surface positions while the Co atoms tended to form a compact cluster in the interior of the nanoparticles. The surface segregation of Co atoms that are encapsulated by less-active Cu atoms, induced by the adsorption of CO molecules, was already enabled at a low coverage of adsorbed CO, providing the energy required to displace the entire compact Co species inside the Cu matrices due to a notable adsorption preference of CO for the Co sites over the Cu ones. The calculated adsorption energies and vibrational frequencies of adsorbed CO should be helpful indicators for experimentally monitoring the nature of the surface sites of CuCo nanoparticles, especially in the case of active Co surface sites emerging in the presence of CO. Full article

AgCu bimetallic· nanoparticles (NPs) represent a novel class of inorganic, broad-spectrum antimicrobial agents that offer enhanced antimicrobial effectiveness and reduced cytotoxicity compared to conventional Ag NP antibacterial materials. This study examines the antimicrobial performance and structural characteristics of AgCu nanoparticles (NPs) synthesized via two distinct chemical reduction processes using PVP-PVA as stabilizers. Despite identical chemical elements and sphere-like shapes in both synthesis methods, the resulting AgCu nanoparticles exhibited significant differences in size and antimicrobial properties. Notably, AgCu NPs with smaller average particle sizes demonstrated weaker antimicrobial activity, as assessed by the minimum inhibitory concentration (MIC) measurement, contrary to conventional expectations. However, larger average particle-sized AgCu NPs showed superior antimicrobial effectiveness. High-resolution transmission electron microscopy analysis revealed that nearly all larger particle-sized nanoparticles were AgCu nanoalloys. In contrast, the smaller particle-sized samples consisted of both AgCu alloys and monometallic Ag and Cu NPs. The fraction of Ag ions (relative to the total silver amount) in the larger AgCu NPs was found to be around 9%, compared to only 5% in that of the smaller AgCu NPs. This indicates that the AgCu alloy content significantly contributes to enhanced antibacterial efficacy, as a higher AgCu content results in the increased release of Ag ions. These findings suggest that the enhanced antimicrobial efficacy of AgCu NPs is primarily attributed to their chemical composition and phase structures, rather than the size of the nanoparticles. Full article

In this study, the surface and textural properties as well as the catalytic performance of Ni/CeO₂ and NiIn/CeO₂ catalysts prepared by wet impregnation (WI) and deposition–precipitation (DP) are investigated. The addition of Ni (3.0 wt.%) resulted in a decrease in the specific surface area and pore volume in the case of the WI method, possibly due to a blockage of mesopores. A minimal addition of In (0.25 wt.%) caused a further decrease in the surface area in both cases. XRD analysis showed that Ni deposited on CeO₂ by DP resulted in some lattice incorporation, affecting the crystallinity of the support. The H₂-TPR profiles altered depending on the different ways of Ni and In introduction. STEM-EDS-derived elemental maps indicated that the Ni and NiIn particles deposited on CeO₂ using the DP method were somewhat smaller than in the WI synthesis. A comprehensive CO-DRIFTS analysis proved a direct Ni-In interaction in bimetallic samples, leading to the formation of a surface NiIn alloy. Ni/CeO₂ catalysts showed a higher activity in the process of dry reforming of methane (DRM) than the bimetallic counterparts at 650 °C, with the Ni_DP sample performing slightly better. However, the Ni_DP catalyst showed significant coking, which was drastically reduced by the addition of In. The agglomeration of Ni and/or NiIn particles during the 6 h DRM reaction somewhat impaired the catalyst performance. Overall, this study highlights the intricate relationship between the catalyst preparation, surface properties and catalytic performance in the DRM reaction and emphasizes the beneficial role of In addition in reducing the coking of the monometallic catalyst and the critical location and surface morphology of nickel nanoparticles decorated with indium and in contact with ceria. Full article

In this study, we investigated the catalytic properties of mono- and bimetallic palladium (Pd) and platinum (Pt) nanoparticles deposited via supercritical fluid reactive deposition (SFRD) on titanium dioxide (TiO₂) powder. Transmission electron microscopy analyses verified that SFRD experiments performed at 353 K and 15.6 MPa enabled the deposition of uniform mono- and bimetallic nanoparticles smaller than 3 nm on TiO₂. Electron-dispersive X-ray spectroscopy demonstrated the formation of alloy-type structures for the bimetallic PdPt nanoparticles. H₂O₂ is an excellent oxidizing reagent for the production of fine and bulk chemicals. However, until today, the design and preparation of catalysts with high H₂O₂ selectivity and productivity remain a great challenge. The focus of this study was on answering the questions of (a) whether the catalysts produced are suitable for the direct synthesis of hydrogen peroxide (H₂O₂) in the liquid phase and (b) how the metal type affects the catalytic properties. It was found that the metal type (Pd or Pt) influenced the catalytic performance strongly; the mean productivity of the mono- and bimetallic catalysts decreased in the following order: Pd > PdPt > Pt. Furthermore, all catalysts prepared by SFRD showed a significantly higher mean productivity compared to the catalyst prepared by incipient wetness impregnation. Full article