Search Results (5,798)

The salinization of natural grasslands is a growing global concern. The Songnen Plain in northeastern China represents a typical soda–saline grassland region, yet an integrated understanding of how salinization reshapes plant, soil, and microbial components in this ecosystem remains limited. In this study, we investigated plant community characteristics, soil physicochemical properties, and soil microbial communities across a salinity gradient (from non-saline to extremely severe saline) using field surveys, laboratory analyses, and structural equation modeling (SEM). Our results showed that vegetation species diversity, the Shannon–Wiener index, and Simpson’s index all decreased from mild to severe salinization. Soil nutrient indicators, including total nitrogen (TN), total phosphorus (TP), and total potassium (TK), significantly decreased with increasing salinity. SEM revealed that plant community diversity had a significant positive effect on soil microorganisms, whereas soil properties, particularly available potassium (AK) and electrical conductivity (EC), exerted significant negative effects on microbial diversity. Together, these results provide an integrated view of how salinization restructures plant–soil–microbe interactions across the Songnen Plain grasslands. These findings improve understanding of saline–alkali grassland degradation from a plant–soil–microbe perspective and provide a theoretical basis for ecosystem restoration in this region. Full article

To clarify cultivar differences in growth performance, yield formation, and bioactive characteristics at the sprout and fresh seed stages, twelve pea cultivars were evaluated. Growth traits, yield formation, and changes in phenolic compounds and antioxidant activity during sprouting were assessed, and the nutritional quality and mineral element composition of fresh seeds were also determined. The results showed that cultivars 24-164 and 24-510 exhibited low germination rates and severe cotyledon decay, making them unsuitable for sprout production. Significant differences were observed among the remaining cultivars in growth traits, edible ratio, and yield efficiency, with cultivars 24-724 and 24-486 showing superior processing efficiency and utilization value. During sprouting, total phenolic and total flavonoid contents, as well as 2,2′-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) radical scavenging activity and ferric reducing antioxidant power (FRAP), were significantly influenced by both cultivar and light exposure stage. Root length and root diameter were significantly and positively correlated with phenolic accumulation and antioxidant activity. Analysis of fresh seed quality revealed marked inter-cultivar variation in nutritional and health-related traits. Cultivar 24-486 exhibited the highest values for phenolic content, antioxidant capacity, vitamin C, vitamin E, and Fe and Se accumulation, whereas cultivar 24-013 showed advantages in calcium and potassium contents. These results identify cultivars 24-724 and 24-486 as promising candidates for sprout production and highlight cultivar 24-486 as a dual-purpose genotype for both sprout and fresh seed utilization. Full article

High-alkali coal can cause slagging and fouling and impact the operational lifespan of the boilers. Traditional single-indicator methods often yield inconsistent results when evaluating the slagging risk of high-alkali coal. In this study, six coal samples were selected and systematically analyzed for their slagging characteristics using scanning electron microscopy (SEM), X-ray fluorescence (XRF), X-ray diffraction (XRD), and ash morphology analysis. Furthermore, a comprehensive evaluation model was constructed by integrating the technique for order preference by similarity to ideal solution (TOPSIS) with the entropy weight method. Additionally, based on images of ash morphology, the fractal dimension (D) was introduced as a quantitative indicator to predict slagging tendency through crack characteristics. The results show that TF, ZD, and KB samples, which are rich in alkaline oxides (CaO, Fe₂O₃, Na₂O, K₂O), form low-melting-point eutectic silicates during combustion, resulting in significant melting and agglomeration with wide cracks between aggregates, indicating a strong slagging tendency. Their fractal dimensions (D) range from 1.81 to 1.92. In contrast, HM and WQ samples, dominated by SiO₂ and Al₂O₃, form high-melting-point mullite and quartz, showing loose ash morphology with uniformly distributed cracks and a weak slagging tendency, with D values of 1.68 and 1.75, respectively. A significant negative correlation was observed between D and the E-TOPSIS model (y = 3.54 − 1.72x). Therefore, fractal analysis allows for rapid assessment of slagging risk without the need for complex chemical testing. This study provides valuable insights for predicting the slagging tendency of high-alkali coal during combustion. Full article

Nitrous oxide (N₂O) emissions from agricultural soils are an important source of greenhouse gases and are strongly influenced by fertilization practices. In this study, a field experiment was conducted from 24 June to 12 October 2024, at a saline-alkali farmland site in Binzhou, Shandong Province, China, to evaluate the effect of Bacillus subtilis biofertilizer on N₂O emissions and to explore the underlying mechanisms. Compared with conventional chemical fertilization, the Bacillus subtilis biofertilizer treatment reduced the cumulative N₂O emission flux by 39%. At the N₂O emission peak, the emission flux under the biofertilizer treatment was 40.7%, 18.2% lower than that under the CF and CBF treatments, respectively. Functional gene analysis further showed that at the N₂O emission peak, the biofertilizer treatment reduced the copy number of Bacterial-amoA by 94% and 83% relative to CF and CBF, respectively, while the hao gene abundance in the CF treatment was 7.67, 24 times higher than that in the BF and CBF treatments, indicating that the reduction in N₂O emissions was closely associated with suppression of the nitrification process. In addition, the biofertilizer treatment showed the highest plant nitrogen uptake. All fertilization treatments significantly increased crop yield compared with the control, whereas there was no significant difference in yield among BF, CF, and CBF treatments (p > 0.05). These findings indicate that B. subtilis biofertilizer can mitigate N₂O emissions from saline-alkali farmland without reducing crop yield and may represent a promising strategy for sustainable agricultural management. Full article

The production of cement is associated with significant CO₂ emissions, while the escalating volume of solid waste poses severe environmental challenges. To reduce the dependence on cement and fully utilize solid waste materials to address these challenges, this study prepared alkali-activated concrete by completely replacing cement with solid waste materials (slag, fly ash, and silica fume). Research was conducted on the optimization of material mix design and fiber reinforcement. From macro–micro perspectives and through advanced characterization methods (SEM, XRD, and TG), the action mechanism of activator concentration and precursor material content on alkali-activated concrete was revealed, as well as the influence law of glass fiber on material properties. Meanwhile, the optimal activator concentration, precursor material content and fiber content were determined. The results show that appropriately increasing the activator concentration and slag proportion can effectively promote the formation of cementitious products, thereby improving the mechanical properties of the material. However, excessive alkalinity will lead to an uncontrolled reaction and adverse effects. The addition of fibers significantly enhances the mechanical properties of the material, especially the flexural strength. When the fiber content is 1.8%, the flexural strength is increased by 45.16%. This work establishes a sustainable pathway for construction materials, while addressing industrial waste management and carbon neutrality goals. Full article

Cobalt-based catalysts are promising for propane dehydrogenation (PDH), but their practical application is hindered by limited propylene yields, rapid deactivation, and an incomplete understanding of the catalytically relevant Co species. Here, alkaline treatment was used to increase the density of silanol defects on Silicalite-1, thereby creating abundant anchoring sites for highly dispersed Co species. The resulting Co/Silicalite-1 catalyst achieved 45% propane conversion, 96% propylene selectivity, and stable operation over 60 h on stream (k_d = 0.005 h⁻¹). Combined characterization indicates that silanol defects stabilize highly dispersed, defect-anchored Co species that are responsible for the superior PDH performance. By contrast, supports with lower silanol defect densities favor aggregated CoO_x/Co₃O₄-like species, which are less selective for PDH, more susceptible to reduction to metallic Co under reducing conditions, and more prone to cracking and coke formation. These findings reveal a strong correlation between silanol defect density, Co speciation, and catalytic performance, offering mechanistic insights and design principles for the development of efficient PDH catalysts. Full article

Tomato (Solanum lycopersicum) is a widely consumed vegetable crop and an established model system for plant functional genomics and genetic research in dicotyledons. Salt stress is a major abiotic factor limiting tomato productivity worldwide. The WRKY transcription factor family, one of the largest and most conserved plant-specific transcription factor families, plays pivotal roles in stress responses. This review summarizes recent advances in understanding the functions of tomato WRKY genes under salt stress, focusing on the genomic basis and evolutionary characteristics of the WRKY family, the roles of core WRKY members under salt stress, and the multi-layered regulatory networks mediating WRKY-dependent salt and alkali tolerance. To date, approximately 10 core SlWRKY genes have been functionally validated to regulate tomato salt tolerance, mainly by maintaining ion homeostasis, regulating reactive oxygen species (ROS) balance, facilitating osmotic adjustment, and integrating hormone signaling pathways. Despite this progress, systemic regulatory hierarchies and epigenetic modulation remain poorly resolved. Furthermore, we discuss how specific WRKY members directly regulate downstream effector genes, such as SlSOS1 and SlNHX4. However, direct experimental evidence for the coordination between tomato WRKYs and mitogen-activated protein kinase (MAPK) cascades, as well as epigenetic modifiers under salt stress, is still scarce in current studies. This review provides a theoretical framework and outlines potential technical pathways for translating fundamental insights into tomato salt tolerance into practical applications for sustainable agriculture. Full article

Calcium–silicate–hydrate (C-S-H), the primary binding phase governing cement paste cohesion, undergoes progressive physicochemical transformation upon carbonation—a process that critically dictates concrete durability in atmospheric environments. When CO₂ penetrates the porous cement matrix, it triggers a cascade of degradation mechanisms: calcium leaching decalcifies the C-S-H structure, inducing polymerization of silicate chains from dimeric to longer-chain configurations, while concurrent precipitation of calcium carbonate and amorphous silica gel fundamentally reconstitutes the nanoscale architecture. These nanoscale alterations propagate to macroscopic property evolution, manifesting as initial strength and stiffness gains due to pore-filling carbonation products followed by eventual deterioration as the cohesive binding network deteriorates. This review synthesizes current understanding of carbonation-induced structural evolution, examining the coupled influences of environmental parameters—CO₂ concentration, relative humidity, and temperature—alongside C-S-H intrinsic chemistry (Ca/Si ratio, aluminum substitution, and alkali content) on reaction kinetics and material performance. However, significant knowledge gaps persist: predictive models for in-service carbonation rates remain elusive due to the disconnect between idealized laboratory conditions and the heterogeneous, cracked reality of field concrete; the causal linkage between nanoscale C-S-H alteration and macroscale cracking patterns along with physical performance is poorly resolved, and most mechanistic studies rely on synthetic C-S-H, neglecting the compositional complexity of real Portland cement systems. We further propose emerging protection strategies, including surface barrier coatings and low-carbon alternative binders (geopolymers, calcium sulfoaluminate cements, carbon-negative materials such as recycled cement), which demonstrate enhanced carbonation resistance. Future research priorities include developing effective coating barriers for carbonation protection, developing operando characterization techniques for real-time reaction monitoring, deploying machine learning algorithms to bridge atomistic simulations with structural-scale predictions, and establishing long-term field performance databases to validate laboratory-derived degradation models. Full article

To investigate the effects of incorporating nanomaterials—carbon nanotubes (CNTs) and graphene oxide (GO)—on the axial compressive mechanical properties of alkali-activated recycled aggregate concrete (AARAC) after high-temperature exposure, this study designed 51 sets of specimens with recycled coarse aggregate replacement rate, nanomaterial content, and temperature as the main parameters. Compression tests were conducted to analyze the failure mode and strength variation in AARAC specimens after heating. In addition, microscopic tests, including X-ray diffraction, scanning electron microscopy, and computed tomography (CT scanning), were performed to analyze the microstructural characteristics of the post-heated AARAC specimens. The results indicate that as the replacement rate of recycled coarse aggregate increased from 0% to 100%, the residual compressive strength after exposure to 600 °C decreased from 33.6 MPa to 19 MPa. When 0.1 wt% of CNTs is added, the compressive strength of AARAC after exposure to a high temperature of 600 °C increases by approximately 30.4% compared to that of AARAC without nanomaterial addition. When 0.1 wt% of CNTs and 0.05 wt% of GO are added, the compressive strength after exposure to a high temperature of 600 °C increases by approximately 44.3%, while the size of scattered fragments upon failure increased, and the failure mode appeared more complete. Microscopic test results indicate that the high-temperature treatment did not cause significant changes in the main phase composition of AARAC. The synergistic effect of the nanomaterials CNTs and GO can fully utilize their functions as nucleation sites, pore fillers, and crack bridging agents. By strengthening the Interfacial Transition Zone between the recycled coarse aggregate and the cement paste, refining the Matrix Pore Structure, dispersing local thermal stress, and suppressing the propagation of high-temperature cracks, the mechanical properties of AARAC after high-temperature exposure can be effectively maintained. Full article

This study investigates the inhibitory effects of alkali metal chlorides lithium chloride, sodium chloride and potassium chloride (LiCl, NaCl, and KCl) on sodium dodecyl sulfate (SDS) foams, focusing on the transition from interfacial to bulk-driven destabilization mechanisms. The research demonstrates that foam collapse at high electrolyte concentrations is governed by a massive increase in bulk cohesive pressure and specific ion-pairing (SIP), which leads to interfacial dehydration and the mechanical decoupling of the surface from the bulk phase. It is shown that while surface adsorption reaches a plateau, the thermodynamic state of the solvent becomes the primary driver for film drainage. The results indicate that KCl acts as the most potent defoamer due to its optimal matching of water affinities with the surfactant head groups. These findings provide a new theoretical framework for understanding foam stability in concentrated electrolytic environments, emphasizing the role of bulk cohesive stress over traditional interfacial elasticity. Full article

Apolygus lucorum, a phytozoophagous mirid bug, plays an important role in the species interactions within fruit tree and cotton ecosystems. Previous research has mainly focused on the phytophagous damage that it causes to crops, while its role as a predator of arthropods remains poorly understood. In this study, we systematically investigated the functional responses of A. lucorum to three crop pests: eggs of Helicoverpa armigera, nymphs of Aphis gossypii, and nymphs of Bemisia tabaci. The results show that the predatory behavior of A. lucorum towards all three prey species followed a Holling type II functional response model. Predatory performance varied significantly depending on prey species, developmental stage, and sex of the mirid. The theoretical maximum predation rate was highest for A. gossypii (833.33 individuals/day) and lowest for B. tabaci nymphs. Adult mirids and older nymphs (4th instar) exhibited higher predation rates than younger nymphs. Field-collected A. lucorum from Bt cotton fields were analyzed using molecular diagnostics, and the result confirmed natural predation on A. gossypii, which was consistent with observed pest occurrence patterns in the field. Overall, this study clarifies the prey selectivity and stage-dependent predatory strategies of A. lucorum, providing insights into its trophic flexibility as a facultative predator. These findings contribute to a more comprehensive understanding of its ecological role in agricultural ecosystems, but do not support its use as a biological control agent given its predominantly phytophagous nature and documented pest status. Full article

As the demand for sustainable and bio-based alternatives to petroleum-derived membranes grows, polysaccharides have emerged as promising candidates. In this study, we fabricated free-standing membranes from konjac glucomannan (KGM), a neutral polysaccharide, using a simple base-induced insolubilization process. Fourier transform infrared spectroscopy revealed that the deacetylation of KGM chains promotes extensive intermolecular hydrogen bonding, creating a robust and stable three-dimensional network without the need for chemical cross-linkers. The resulting KGM free-standing membranes exhibited excellent mechanical properties, characterized by high tensile strength in the dry state and remarkable flexibility when hydrated. Furthermore, the membranes demonstrated superior chemical resistance to organic solvents such as acetone and n-hexane. Transport studies showed that the membranes possess a highly dense structure with no detectable pressure-driven pure-water permeation up to 0.25 MPa. Solute permeation experiments using eight model molecules (molecular weight = 144–14,600 Da) indicated that transport behavior is consistent with diffusion through a hydrated polymer network. The effective diffusion coefficient D_eff showed a strong correlation with molecular weight M, following the relationship D_eff ∝ M^−1.7. Furthermore, the permeation behavior remained stable across a wide pH range (2–12), and, within the investigated range of monovalent solutes, D_eff was insensitive to solute charge, indicating that mass transport is dominated by size-based diffusion rather than electrostatic interactions. These findings suggest that KGM free-standing membranes enable reliable molecular fractionation based on size-dependent diffusion within a stable, neutral matrix, offering significant potential for sustainable separation technologies and biomedical applications. Full article

To reduce staining, paper conservators have increasingly treated artworks on paper with enhanced washing using chelating agents, which form complexes with metallic ions, thus facilitating the removal of stains. However, questions remain regarding the efficacy of the method and its impact on the long-term preservation of paper. A treatment of enhanced washing was undertaken on a nineteenth-century mezzotint printed using the chine collé technique, by David Lucas after a painting by John Constable, which was disfigured by significant foxing stains. This intervention provided the opportunity to investigate the mechanism and efficacy of the treatment and whether an alkali reserve could successfully be reintroduced. The print was analysed before, during, and after treatment with a Bruker M6 Jetstream scanning X-ray fluorescence (XRF) spectrometer. The results provided spatially resolved information on the effects of the treatment and gave new insights into the heavily debated causes of foxing on paper, challenging the link with iron contamination. Instead, the distribution of foxing stains showed a correlation with the presence of potassium and calcium, and their reduction during washing corresponded with an improvement in appearance. Calcium replenishment proved only partially successful. Finally, scanning XRF has rarely been used for the analysis of artworks on paper; this study proves its value for research. Full article

Alkali-activated solid waste-based geopolymer represents a novel form of inorganic cementitious material, which is one of the key research directions in the building materials field to achieve the targets of carbon peak and carbon neutrality. Therefore, taking solid waste materials as raw materials to prepare the alkali-activated solid waste-based geopolymers with better mechanical properties is of significant importance for expanding the utilization channels of industrial solid waste materials in Hebei Province. In this study, three solid waste materials, slag, iron tailings sand and coal gangue powder, were used as the precursors of geopolymer, and solid sodium silicate was used as the activator to prepare the solid waste-based geopolymer. Response surface methodology was adopted to design the composition of the geopolymer, and the dosages of slag, Na₂O and coal gangue powder were taken as design variables, and the compressive strength of the geopolymer at 7 days and 28 days were taken as response variables. The results show that it is feasible to optimize the composition of solid sodium silicate-activated solid waste-based geopolymer (SSG) by using response surface methodology. The error value of the SSG-mortar compressive strength prediction model is below 2.0%. The slag contents exhibit a positive correlation with the compressive strength of SSG-mortar, but the coal gangue powder contents and Na₂O contents have a negative correlation. The optimized compositions of SSG-mortar are 20% iron tailings sand, 26% coal gangue powder, 54% slag, and 6.41% Na₂O (regulated by 6.23% solid sodium silicate and 6.23% solid NaOH granules), and the corresponding compressive strengths of SSG-mortar at 7 days and 28 days are 37.1 MPa and 44.9 MPa, respectively. In addition, dry shrinkage tests, wet–dry cycling tests, freeze–thaw cycling tests, salt corrosion tests, SEM analysis and XRD analysis were conducted on the SSG-mortar with the optimal composition to evaluate its shrinkage behavior, freeze–thaw resistance, salt corrosion resistance and microstructural strengthening mechanisms. The results show that SSG-mortar has relatively good frost resistance and salt erosion resistance. The mass loss rate value and compressive strength loss rate value of SSG-mortar are 1.67% and 18.7%, respectively, after 100 freeze–thaw cycles. Furthermore, the corrosion resistance coefficient value of SSG-mortar is greater than 92%, and the mass loss rate value is lower than 2.4%. The SEM and XRD test results display that, in an alkaline environment, the interwoven consolidation of hydrated gels (including C-S-H gel, C-A-S-H gel, C-(N)-A-S-H gel and N-A-S-H gel) and the filling effect of solid wastes jointly achieve an improvement in the properties of SSG-mortar. Full article

Background/Objectives: Vascular inflammation and impaired endothelial regeneration contribute to chronic degenerative disorders, including ocular neovascularization and retinal degeneration. Nutritional bioactives that modulate molecular pathways governing angiogenesis and tissue remodeling represent promising adjunct strategies for vascular health. This study investigated whether cocoa powder (CP) regulates hypoxia-driven molecular signaling and attenuates vascular inflammation and degeneration. Methods: The vascular-modulatory effects of CP were examined in human umbilical vein endothelial cells (HUVECs) and in murine models of alkali-induced corneal neovascularization and N-methyl-N-nitrosourea (MNU)-induced retinal degeneration. Hypoxia-inducible factor-1α (HIF-1α) signaling and downstream angiogenic targets were assessed by Western blotting and quantitative PCR. Endothelial migration, tube formation, and transwell assays were performed to evaluate angiogenic responses. In vivo, oral CP (50 or 200 mg/kg) was administered, and vascular growth, inflammatory and remodeling markers, and retinal structural integrity were analyzed by histology, immunofluorescence, and protein expression. Results: At non-cytotoxic concentrations (0.1–1.0 μg/mL), CP suppressed hypoxia-induced HIF-1α protein stabilization without altering HIF-1α mRNA levels and reduced expression of VEGFA, EPO, and GLUT1. CP significantly inhibited VEGF-A-induced endothelial migration, network formation, and chemotactic invasion. In alkali-injured corneas, CP reduced the neovascularized area and downregulated VEGF, MMP2, MMP9, α-smooth muscle actin, and Ninj1, indicating attenuation of vascular inflammation and fibrotic remodeling. In the MNU model, CP preserved outer nuclear layer thickness, reduced glial activation (GFAP), maintained rhodopsin expression, and decreased MMP9 induction. Conclusions: CP functions as a nutritional modulator of hypoxia-responsive and inflammatory pathways, suppressing pathological angiogenesis while supporting structural preservation in degenerative vascular conditions. These findings highlight the translational potential of dietary polyphenol-rich interventions in regulating vascular inflammation and regeneration. Full article