Search Results (14)

Over the past two decades, the application of photocatalytic reactions in organic synthesis has increased remarkably. Porphyrins, renowned for their exceptional photophysical properties, photostability, and prevalence in natural catalytic processes, are attracting significant attention as promising photocatalysts for reactions proceeding through energy transfer and one-electron transfer. In this work, we synthesized the indium(III) complex of 2-[4-(diethoxyphosphoryl)phenyl]-1H-imidazo[4,5-b]-5,10,15,20-tetramesitylporphyrin (InTMPIP) and explored its application as a photocatalyst for the oxidation of sulfides by dioxygen or air. Complex InTMPIP was found to generate singlet oxygen with quantum yield of 0.92 (toluene) and enables efficient photooxidation of sulfides to sulfoxides by dioxygen in “green” acetonitrile/water (4:1 v/v) or methanol/chloroform (2:1 v/v) solvent mixtures with almost quantitative yield. Furthermore, InTMPIP was grafted onto hydrated mesoporous titania and materials InTMPIP/TiO₂-1 and InTMPIP/TiO₂-2 with different In/Ti ratios were obtained and investigated. The composition and structure of the materials were studied using a combination of elemental analysis, various spectroscopic methods, gas adsorption measurements, and SEM imaging. Finally, the photocatalytic efficiency of InTMPIP/TiO₂-2 was explored in aerobic photooxidation of sulfides. The heterogenized complex enables selective synthesis of sulfoxides under “green” conditions; however, it is prone to leaching into the solution when irradiated with both blue and red LEDs. Full article

The new copper(II) complexes [Cu₄(pa)₄(Bae)₄]·H₂O (1) and [Cu₄(eba)₄(Buae)₄]·H₂O (2) (Hpa = propionic acid, HBae = 2-benzylaminoethanol, Heba = 2-ethylbutyric acid and HBuae = 2-butylaminoethanol) were synthesizsed by the interaction of a copper salt with a methanol solution of the respective ligands. The single-crystal X-ray diffraction analysis reveals that both compounds have a {Cu₄(μ₃-O)₄} cubane-like core. Both compounds show pronounced phenoxazinone synthase-like activity towards the aerobic oxidation of o-aminophenol to phenoxazinone chromophore, with the maximum initial rates W₀ up to 3.5 × 10⁻⁷ M s⁻¹, and exhibit complex non-linear W₀ vs. [catalyst]₀ dependences. DFT//CCSD theoretical calculations (B3LYP/ma-def2-TZVP//DLPNO-CCSD(T)/ma-def2-TZVPP) were employed to investigate the most challenging steps of catalyst-free and copper-catalysed o-aminophenol oxidation (formation of o-aminophenoxyl radical). QTAIM analysis was used to study the key intermediates and weak interactions. Geometries and energies of intermediates and transition states were benchmarked against a series of popular DFT functionals. The results of the calculations demonstrate that a Cu^II–OO• copper-superoxo model catalyst decreases the calculated activation barrier from 28.7 to 19.9 kcal mol⁻¹ for the catalyst-free and copper-catalysed abstraction of the H atom from the hydroxyl group of o-aminophenol, respectively. Finally, both complexes 1 and 2 were studied as catalysts in the amidation of cyclohexane with benzamide to give N-cyclohexyl benzamide and N-methyl benzamide employing di-tert-butyl peroxide (DTBP) as the oxidant, with a conversion of 16%, and in the oxidation of cyclohexane to cyclohexanol with aq. H₂O₂, with a conversion of 12%. Full article

Five different (commercial and self-synthesized) titania samples were mixed with NaBH₄ and then heated to obtain black titania samples. The change in synthesis conditions resulted in the preparation of nine different photocatalysts, most of which were black in color. The photocatalysts were characterized by various methods, including X-ray diffraction (XRD), diffuse reflectance spectroscopy (DRS), X-ray photoelectron spectroscopy (XPS), scanning transmission electron microscopy (STEM), photoacoustic and reverse-double beam photoacoustic spectroscopy (PAS/RDB-PAS). The photocatalytic activity was tested for oxidative decomposition of acetic acid, methanol dehydrogenation, phenol degradation and bacteria inactivation (Escherichia coli) under different conditions, i.e., irradiation with UV, vis, and NIR, and in the dark. It was found that the properties of the obtained samples depended on the features of the original titania materials. A shift in XRD peaks was observed only in the case of the commercial titania samples, indicating self-doping, whereas faceted anatase samples (self-synthesized) showed high resistance towards bulk modification. Independent of the type and degree of modification, all modified samples exhibited much worse activity under UV irradiation than original titania photocatalysts both under aerobic and anaerobic conditions. It is proposed that the strong reduction conditions during the samples’ preparation resulted in the partial destruction of the titania surface, as evidenced by both microscopic observation and crystallographic data (an increase in amorphous content), and thus the formation of deep electron traps (bulk defects as oxygen vacancies) increasing the charge carriers’ recombination. Under vis irradiation, a slight increase in photocatalytic performance (phenol degradation) was obtained for only four samples, while two samples also exhibited slight activity under NIR. In the case of bacteria inactivation, some modified samples exhibited higher activity under both vis and NIR than respective pristine titania, which could be useful for disinfection, cancer treatment and other purposes. However, considering the overall performance of the black titania samples in this study, it is difficult to recommend them for broad environmental applications. Full article

Aerobic photo-oxidation is a kind of green catalytic process that give valuable chemicals because of its mild reaction conditions and high product selectivity. Recently, small-sized IB metal nanoparticles (NPs; e.g., Cu, Ag, and Au, sized 1–3 nm) upon the surface of titanium oxide show excellent photocatalytic performance. The introduction of IB metal NPs can enhance the separation of photo-generated holes/electrons during photo-oxidations. In this account, we summarize the recent progress of small-sized IB metal NPs catalyzed by aerobic photo-oxidations, including the conversion of methanol, ethanol, sulfide, and benzylamine. More importantly, the structure–property correlations at the atomic level are detailed and discussed, e.g., the insights into the activation of oxygen and the identification of catalytic active sites. Future investigations are needed to carry out and reveal the catalytic mechanisms and conversion pathways. Full article

The aerobic oxidation of biomass transformations into valuable chemical products via a green catalytic process is one of the most important protocols because of its low reaction temperature and high productivity rate. Recently, the introduction of small-sized Cu and Au nanoparticles (e.g., 1–3 nm) upon the surface of oxides can provide more catalytic active sites and then enhance the catalytic activity of aerobic oxidations significantly. The introduction of these metal nanoparticles is a kind of perfect catalyst for enhancing the efficiency of the activation of oxygen molecules and the separation of photo-generated holes and electrons during the photo-oxidation reactions. In this account, we summarize recent progress of the aerobic oxidation of biomass alcohol toward the production of highly valuable chemicals over supported catalysts of metal nanoparticles (NPs), including methanol conversion into methyl formate via photo-oxidation over CuO_x/TiO₂ nanocomposites, biomass ethanol transformation with biomass furfural to produce hydrocarbons biofuels over Au/NiO catalysts, and glucose oxidation to gluconic acid using Au/activated carbon (Au/AC) as catalysts. Furthermore, at the atomic level, to understand the structure-property correlations, insights into molecular activations of oxygen and biomass, and the investigation of active catalytic sites on photo/catalysts will be detailed and discussed. Finally, future studies are needed to achieve more exciting progress in the fundamental revealing of the catalytic reaction mechanisms and conversion pathway and the future perspective in industrial applications. Full article

Although the study of aerobic methane-oxidizing bacteria (MOB, methanotrophs) has been carried out for more than a hundred years, there are many uncultivated methanotrophic lineages whose metabolism is largely unknown. Here, we reconstructed a nearly complete genome of a Beijerinckiaceae methanotroph from the enrichment of paddy soil by using nitrogen-free M2 medium. The methanotroph labeled as MO3_YZ.1 had a size of 3.83 Mb, GC content of 65.6%, and 3442 gene-coding regions. Based on phylogeny of pmoA gene and genome and the genomic average nucleotide identity, we confirmed its affiliation to the MO3 lineage and a close relationship to Methylocapsa. MO3_YZ.1 contained mxaF- and xoxF-type methanol dehydrogenase. MO3_YZ.1 used the serine cycle to assimilate carbon and regenerated glyoxylate through the glyoxylate shunt as it contained isocitrate lyase and complete tricarboxylic acid cycle-coding genes. The ethylmalonyl-CoA pathway and Calvin–Benson–Bassham cycle were incomplete in MO3_YZ.1. Three acetate utilization enzyme-coding genes were identified, suggesting its potential ability to utilize acetate. The presence of genes for N₂ fixation, sulfur transformation, and poly-β-hydroxybutyrate synthesis enable its survival in heterogeneous habitats with fluctuating supplies of carbon, nitrogen, and sulfur. Full article

Hypoxia in tumors results in resistance to both chemotherapy and radiotherapy treatments but affords an environment in which hypoxia-activated prodrugs (HAP) are activated upon bioreduction to release targeted cytotoxins. The benzotriazine 1,4-di-N-oxide (BTO) HAP, tirapazamine (TPZ, 1), has undergone extensive clinical evaluation in combination with radiotherapy to assist in the killing of hypoxic tumor cells. Although compound 1 did not gain approval for clinical use, it has spurred on the development of other BTOs, such as the 3-alkyl analogue, SN30000, 2. There is general agreement that the cytotoxin(s) from BTOs arise from the one-electron reduced form of the compounds. Identifying the cytotoxic radicals, and whether they play a role in the selective killing of hypoxic tumor cells, is important for continued development of the BTO class of anticancer prodrugs. In this study, nitrone spin-traps, combined with electron spin resonance, give evidence for the formation of aryl radicals from compounds 1, 2 and 3-phenyl analogues, compounds 3 and 4, which form carbon C-centered radicals. In addition, high concentrations of DEPMPO (5-(diethoxyphosphoryl)-5-methyl-1-pyrroline N-oxide) spin-trap the •OH radical. The combination of spin-traps with high concentrations of DMSO and methanol also give evidence for the involvement of strongly oxidizing radicals. The failure to spin-trap methyl radicals with PBN (N-tert-butylphenylnitrone) on the bioreduction of compound 2, in the presence of DMSO, implies that free •OH radicals are not released from the protonated radical anions of compound 2. The spin-trapping of •OH radicals by high concentrations of DEPMPO, and the radical species arising from DMSO and methanol give both direct and indirect evidence for the scavenging of •OH radicals that are involved in an intramolecular process. Hypoxia-selective cytotoxicity is not related to the formation of aryl radicals from the BTO compounds as they are associated with high aerobic cytotoxicity. Full article

Au nanoparticles bound to crystalline CeO₂ nanograins that were dispersed on the nanoplate-like Mg(OH)₂, denoted as Au/CeO₂-Mg(OH)₂, were developed as the highly active and selective multifunctional heterogeneous catalyst for direct oxidative esterification of aldehydes with alcohols to produce alkyl esters under base-free aerobic conditions using oxygen or air as the green oxidants. Au/CeO₂-Mg(OH)₂ converted 93.3% of methacrylaldehyde (MACR) to methyl methacrylate (MMA, monomer of poly(methyl methacrylate)) with 98.2% selectivity within 1 h, and was repeatedly used over eight recycle runs without regeneration. The catalyst was extensively applied to other aldehydes and alcohols to produce desirable alkyl esters. Comprehensive characterization analyses revealed that the strong metal–support interaction (SMSI) among the three catalytic components (Au, CeO₂, and Mg(OH)₂), and the proximity and strong contact between Au/CeO₂ and the Mg(OH)₂ surface were prominent factors that accelerated the reaction toward a desirable oxidative esterification pathway. During the reaction, MACR was adsorbed on the surface of CeO₂-Mg(OH)₂, upon which methanol was simultaneously activated for esterifying the adsorbed MACR. Hemiacetal-form intermediate species were subsequently produced and oxidized to MMA on the surface of the electron-rich Au nanoparticles bound to partially reduced CeO_2−x with electron-donating properties. The present study provides new insights into the design of SMSI-induced supported-metal-nanoparticles for the development of novel, multifunctional, and heterogeneous catalysts. Full article

Aerobic moderately thermophilic and thermophilic methane-oxidizing bacteria make a substantial contribution in the control of global warming through biological reduction of methane emissions and have a unique capability of utilizing methane as their sole carbon and energy source. Here, we report a novel moderately thermophilic Methylococcus-like Type Ib methanotroph recovered from an alkaline thermal spring (55.4 °C and pH 8.82) in the Ethiopian Rift Valley. The isolate, designated LS7-MC, most probably represents a novel species of a new genus in the family Methylococcaceae of the class Gammaproteobacteria. The 16S rRNA gene phylogeny indicated that strain LS7-MC is distantly related to the closest described relative, Methylococcus capsulatus (92.7% sequence identity). Growth was observed at temperatures of 30–60 °C (optimal, 51–55 °C), and the cells possessed Type I intracellular membrane (ICM). The comparison of the pmoA gene sequences showed that the strain was most closely related to M. capsulatus (87.8%). Soluble methane monooxygenase (sMMO) was not detected, signifying the biological oxidation process from methane to methanol by the particulate methane monooxygenase (pMMO). The other functional genes mxaF, cbbL and nifH were detected by PCR. To our knowledge, the new strain is the first isolated moderately thermophilic methanotroph from an alkaline thermal spring of the family Methylococcaceae. Furthermore, LS7-MC represents a previously unrecognized biological methane sink in thermal habitats, expanding our knowledge of its ecological role in methane cycling and aerobic methanotrophy. Full article

Modified titania photocatalyst powder samples were prepared using the sol-gel method for copper (Cu) and cerium (Ce) doping and impregnation for platinum (Pt) loading. Their bulk crystalline structures were investigated using X-ray diffractometry (XRD) with the Rietveld analysis. The surface/bulk structure, surface properties, and morphologies were observed using reversed double-beam photoacoustic spectroscopy (RDB-PAS), nitrogen adsorption, and scanning electron microscopy, respectively. The results from the XRD revealed that all samples were mainly anatase (ca. 80% or higher) with small amounts of rutile and non-crystalline components. The specific surface areas of all samples were in the range of 115–155 m² g⁻¹. Ce and Cu species were mainly distributed, while Pt was potentially loaded as a partially oxidized form on the titania surface. The results from the RDB-PAS indicated the changing of the energy-resolved distribution of electron traps (ERDT) from the original titania surface upon doping of the metals (Cu, Ce, and Pt), which altered their catalytic activities. The metals photocatalytic activities with UV irradiation were measured in two representative reactions; (a) CO₂ evolution from acetic acid under the aerobic condition and (b) H₂ evolution from deaerated aqueous methanol. In reaction (a), the Cu and/or Ce modification gave almost the same or slightly lower activity compared to the non-modified titania samples, while platinum loading yielded ca. 5–6 times higher activity. For reaction (b), the photocatalytic tests were divided into two sets; without (b₁) and with (b₂) Pt deposition during the reaction. Similar enhancements of activity from the Pt loading sample (and by Cu modification) were observed in reaction (b₁) without in-situ platinum deposition, while the unmodified and Ce-doped samples were almost inactive. For the activities of reaction (b₂) with in-situ platinum deposition, the unmodified samples showed the highest activity while the Cu-modified samples showed significantly lower activity. Full article

We developed a lab-scale aerobic–methane oxidation bioreactor (MOB)–anoxic system, combining a MOB and the aerobic–anoxic denitrification process, and evaluated its potential for advanced nitrogen treatment in wastewater treatment plants (WWTPs). The MOB used biogas generated from a WWTP and secondary-treated wastewater to support mixed methanotroph cultures, which mediated the simultaneous direct denitrification by methanotrophs and methanol production necessary for denitrifying bacteria in the anoxic chamber for denitrification. Compared to the aerobic–anoxic process, the aerobic–MOB–anoxic system with an influent concentration of 4.8 L·day⁻¹ showed a marked increase in the reduction efficiency for total nitrogen (41.9% vs. 85.9%) and PO₄⁻³-P (41.1% vs. 69.5%). However, the integrated actions of high nitrogen and phosphorus consumption are required for methanotroph growth, as well as the production and supply of methanol as a carbon source for denitrification and methane monooxygenase-mediated oxidation of NH₃ into N₂O by methanotrophs. After three months of continuous operation using actual wastewater, the total nitrogen removal rate was 76.3%, equivalent to the rate observed in a tertiary-advanced WWTP, while the total phosphorus removal rate reached 83.7%. Full article

We studied the aerobic oxidation of methanol over nanoporous gold catalysts under neutral and alkaline conditions. We find that under neutral conditions the catalyst has an activation period of about 10 h while upon addition of a base the catalyst becomes active right away. After this activation period, however, the activity of the catalyst is in both cases similar. Moreover, the selectivity was not affected by the base. We tested different bases and found the largest effect when adding OH⁻. The cation, however, does not play a role. We conclude that it is OH⁻, which is impacting the reaction and propose a mechanism for the suppression of the activation period. While the catalytic cycle, i.e., the reaction of methanol on the catalyst surface seems unaffected, the transient adsorption of OH⁻ onto the surface can facilitate the activation of molecular oxygen by donating electrons to the surface. Due to the intermediate formation of oxidic Ag species, an effective segregation of surface-near Ag can be induced, which increases the abundance of Ag being essential for the activation of oxygen at the surface. In this way, a more efficient pathway for the generation of active oxygen is opened, allowing the reaction to set in faster. Full article

Vanadium supported on pure (Al₂O₃, ZrO₂) or mixed zirconia-alumina (with Al/(Al + Zr) ratio of 0.75 or 0.25) catalysts have been prepared by wet impregnation, using homemade prepared supports. The catalysts have been characterized and tested in the oxidative dehydrogenation (ODH) of ethane and in the methanol aerobic transformation. The catalytic performance strongly depends on the nature of the metal oxide support. Thus, activity decreases in the order: VOx/ZrO₂ > VOx/(Al,Zr-oxides) > VOx/Al₂O₃. On the other hand, at low and medium ethane conversions, the selectivity to ethylene presents an opposite trend: VOx/Al₂O₃ > VOx/(Al,Zr-oxides) > VOx/ZrO₂. The different selectivity to ethylene at high conversion is due to the lower/higher initial ethylene formation and to the extent of the ethylene decomposition. Interestingly, VOx/(Al,Zr-oxides) with low Zr-loading present the lowest ethylene decomposition. The catalytic results obtained mainly depend on the nature of the supports whereas the role of the dispersion of vanadium species is unclear. In methanol oxidation, the catalysts tested present similar catalytic activity regardless of the support (Al₂O₃, ZrO₂ or mixed Al₂O₃-ZrO₂) but strong differences in the selectivity to the reaction products. Thus, dimethyl ether was mainly observed on alumina-supported vanadium oxide catalysts (which is associated to the presence of acidic sites on the surface of the catalyst, as determined by TPD-NH₃). Formaldehyde was the main reaction product on catalysts supported on Zr-containing oxides (which can be related to a low presence of acid sites). In this article, the importance of the presence of acid sites in ethane ODH, which can be estimated using the methanol transformation reaction, is also discussed. Full article

This review covers some recent advances in application of omics technologies to studying methylotrophs, with special reference to their activities in natural environments. Some of the developments highlighted in this review are the new outlook at the role of the XoxF-type, lanthanide-dependent methanol dehydrogenase in natural habitats, new mechanistic details of methane oxidation through the reverse methanogenesis pathway, propensity of 'aerobic' methanotrophs to thrive in hypoxic environments and potential connection of this process to denitrification, and a novel outlook at methane oxidation as a community function. Full article