Search Results (32)

Organic solar cells (OSCs) have witnessed significant advancements in recent years, largely propelled by innovations in material design and device engineering. Among the emerging materials, dimerized small-molecule acceptors (DSMAs) have garnered considerable attention due to their unique advantages. For instance, DSMAs can directly inherit the excellent optoelectronic properties of corresponding small-molecule monomers. Moreover, their relatively larger molecular weight can effectively suppress molecular diffusion in the active layer, thereby enhancing the stability of OSCs. Compared to polymer acceptors, DSMAs have a well-defined structure, which is free from batch-to-batch variability, greatly enhancing the reproducibility of devices. This review comprehensively summarizes recent progress in DSMAs for OSCs, with a focus on their two primary linkage configurations: conjugative and non-conjugative connections. Additionally, the impact of various connection positions (including core-unit, end-group, and side-chain connection sites) on molecular packing, optoelectronic properties, and device performance is systematically reviewed. The review highlights the critical role of DSMAs in addressing key challenges in OSCs, such as photodegradation and morphological instability, while balancing power conversion efficiency and long-term stability. By consolidating recent breakthroughs and identifying future research directions, this work aims to provide valuable insights into the rational design of DSMAs, paving the way for the development of high-performance and commercially viable OSCs. Full article

Donor acceptor (D-$\mathsf{\pi }$-A) fluorophores containing a donor unit and an acceptor moiety at each end connected by a conjugated linker gained attention in the last decade due to their conjugated system and ease of tunability. These features make them good candidates for various applications such as bioimaging, photovoltaic devices and nonlinear optical materials. Upon excitation of the D-$\mathsf{\pi }$-A fluorophore, intramolecular charge transfer (ICT) occurs, and it polarizes the molecule resulting in the ‘push–pull’ system. The emission wavelengths of fluorophores can be altered from UV-vis to NIR region by modifying the donor unit, acceptor moiety and the $\mathsf{\pi }$ linker between them. The NIR emitting fluorophores with restricted molecular rotations are used in aggregation-induced emission (AIE). D-$\mathsf{\pi }$-A fluorophores with carboxylic acid and cyano groups are preferred in photovoltaic applications, and fluorophores with large surface area are used for two photon absorbing applications. Herein, we report the synthesis, optical properties, and applications of various D-$\mathsf{\pi }$-A fluorophores in UV-vis and NIR region. Full article

Organic solar cells (OSCs) are made from carbon-rich organic compounds with low environmental impacts, unlike the silicon in traditional solar panels. Some of these organic materials can be broken down and reprocessed, enabling the recovery of valuable components. Specifically, the active-layer materials that make up OSCs can be designed with sustainability in mind. However, it is important to note that practical active materials that can be used for the commercialization of OSCs are still an area of research and development due to their low efficiency/stability and processability. Herein, we designed and synthesized three A-D-A’-D-A-type long-conjugated non-fullerene acceptors (NFAs) by incorporating various electron-withdrawing groups into the benzothiadiazole-diindacenodithiophene core. These NFAs, by changing their end-capping groups, exhibit not only distinct physical, optical, and electrochemical properties, but also differences in crystallinity and exciton dissociation. As a result, they exhibited significant differences in photovoltaic performance in PM6 donor-based binary devices. The introduction of small amounts of NFAs as a third component in the PM6:BTP-eC9 blend significantly enhanced its photon harvesting capabilities and influenced its charge transfer dynamics. Finally, we achieved a remarkable power conversion efficiency of nearly 17% by utilizing an eco-friendly solvent. This study provides valuable insights for the development of NFAs in efficient and eco-friendly OSCs. Full article

This paper explores a novel group of D-π-A configurations that has been specifically created for organic solar cell applications. In these material compounds, the phenothiazine, the furan, and two derivatives of the thienyl-fused IC group act as the donor, the π-conjugated spacer, and the end-group acceptors, respectively. We assess the impact of substituents by introducing bromine atoms at two potential substitution sites on each end-group acceptor (EG1 and EG2). With the donor and π-bridge held constant, we have employed density functional theory and time-dependent DFT simulations to explore the photophysical and optoelectronic properties of tailored compounds (M1–M6). We have demonstrated how structural modifications influence the optoelectronic properties of materials for organic solar cells. Moreover, all proposed compounds exhibit a greater V_oc exceeding 1.5 V, a suitable HOMO-LUMO energy gap (2.14–2.30 eV), and higher dipole moments (9.23–10.90 D). Various decisive key factors that are crucial for exploring the properties of tailored compounds—frontier molecular orbitals, transition density matrix, electrostatic potential, open-circuit voltage, maximum absorption, reduced density gradient, and charge transfer length (D_index)—were also explored. Our analysis delivers profound insights into the design principles of optimizing the performance of organic solar cell applications based on halogenated material compounds. Full article

Efficient and stable hole-transport material (HTM) is essential for enhancing the efficiency and stability of high-efficiency perovskite solar cells (PSCs). The commonly used HTMs such as spiro-OMeTAD need dopants to produce high efficiency, but those dopants degrade the perovskite film and cause instability. Therefore, the development of dopant-free N,N′-bicarbazole-based HTM is receiving huge attention for preparing stable, cost-effective, and efficient PSCs. Herein, we designed and proposed seven distinct small-molecule-based HTMs (B1–B7), which are synthesized and do not require dopants to fabricate efficient PSCs. To design this new series, we performed synergistic side-chain engineering on the synthetic reference molecule (B) by replacing two methylthio (–SCH3) terminal groups with a thiophene bridge and electron-withdrawing acceptor. The enhanced phase inversion geometry of the proposed molecules resulted in reduced energy gaps and better electrical, optical, and optoelectronic properties. Density functional theory (DFT) and time-dependent DFT simulations have been used to study the precise photo-physical and optoelectronic properties. We also looked into the effects of holes and electrons and the materials’ structural and photovoltaic properties, including light harvesting energy, frontier molecular orbital, transition density matrix, density of states, electron density matrix, and natural population analysis. Electron density difference maps identify the interfacial charge transfer from the donor to the acceptor through the bridge, and natural population analysis measures the amount of charge on each portion of the donor, bridge, and acceptor, which most effectively represents the role of the end-capped moieties in facilitating charge transfer. Among these designed molecules, the B6 molecule has the greatest absorbance (λ_max of 444.93 nm in dichloromethane solvent) and a substantially shorter optical band gap of 3.93 eV. Furthermore, the charge transfer analysis reveals superior charge transfer with improved intrinsic characteristics. Furthermore, according to the photovoltaic analysis, the designed (B1–B7) HTMs have the potential to provide better fill factor and open-circuit voltages, which will ultimately increase the power conversion efficiency (PCE) of PSCs. Therefore, we recommend these molecules for the next-generation PSCs. Full article

We performed intra- and intermolecular charge transfer (CT) excitation energy calculations of (a) conjugated carbon chain [H₂N–(CH=CH)_n–X] and (b) its equidistant H₂NH∙∙∙HX (n = 2~8) with various electron acceptors (X = NH₂, OH, Cl, CHO, CN, and NO₂) using EOM-CCSD, time-dependent (TD) Hartree–Fock (HF) and various density functional theory (DFT) functionals, such as BLYP, B3LYP, long-range corrected (LC) DFT, and LC-DFT with an optimally tuned (OT) range separation parameter (µ) using Koopman’s theorem to investigate the effect of the electron-withdrawing (or -donating) strength of end-capped functional group (X) and CT distance (R) on intra- and intermolecular CT excitation energies. As the electron-withdrawing strength of X increases, both intra- and intermolecular CT excitation energies tend to decrease, since energy gaps between orbitals corresponding to CT excitations (e.g., HOMO and LUMO) decrease. However, the effect of the electron-withdrawing group on intramolecular CT excitation energy is negligible (at most 0.5 eV). OT-LC-DFT shows accurate intermolecular CT excitation energy, but worse results in intramolecular CT excitation energy than LC-DFT with the default µ value (0.47). Therefore, we conclude that the optimal tuning method is not effective in predicting intramolecular CT excitation energy. While intermolecular CT excitation energy has excitonic binding energy with asymptotic behavior to CT distance that is not affected by the choice of range separation parameter, intramolecular CT excitation energy is affected by orbital relaxation energy, which strongly depends on the choice of range separation parameter, which makes the OT method of range separation parameter ineffective in predicting intramolecular CT excitation energy as well as local excitation with high accuracy. Full article

A series of small molecules, T-2FB-T-ORH, T-2FB-T-BORH, and T-2FB-T-HDRH, were synthesized to have a thiophene-flanked difluorobenzene (T-2FB-T) core and alkyl-substituted rhodanine (RH) end groups for their use as nonfullerene acceptors (NFAs) in organic solar cells (OSCs). Octyl, 2-butyloctyl (BO), and 2-hexyldecyl (HD) alkyl side chains were introduced into RHs to control the material’s physical properties based on the length and size of the alkyl chains. The optical properties of the three NFAs were found to be almost the same, irrespective of the alkyl chain length, whereas the molecular crystallinity and material solubility significantly differed depending on the alkyl side chains. Owing to the sufficient solubility of T-2FB-T-HDRH, OSCs based on PTB7-Th and T-2FB-T-HDRH were fabricated. A power conversion efficiency of up to 4.49% was obtained by solvent vapor annealing (SVA). The AFM study revealed that improved charge mobility and a smooth and homogeneous film morphology without excessive aggregation could be obtained in the SVA-treated film. Full article

We have simulated the effect of changing the end groups in BTP core with five organic units of 1,3-Indandione (IN), 2-thioxothiazolidin-4-one (Rhodanine), propanedinitrile (Malononitrile), (2-(6-oxo-5,6-dihydro-4H-cyclopenta[c]thiophen-4-ylidene)malononitrile) (CPTCN) and 2-(3-oxo-2,3-dihydroinden-1-ylidene (IC), and two halogenated units of (4F) IC and (4Cl) IC on the optical and photovoltaic properties of the BTP DA’D core molecular unit. Thus modified, seven molecular structures are considered and their optical properties, including HOMO and LUMO energies and absorption spectra are simulated in this paper. On the basis of HOMO and LUMO energies, it is found that two of the seven molecules, BTP-IN and BTP-Rhodanine, can act as donors and the other four, BTP-(4F) IC, BTP-(4Cl) IC, BTP-CPTCN and BTP-IC, as acceptors in designing bulk heterojunction (BHJ) organic solar cells (OSCs). Using these combinations of donors and acceptors in the active layer, eight BHJ OSCs, such as BTP-IN: BTP-(4F) IC, BTP-IN: BTP-(4Cl) IC, BTP-IN: BTP-CPTCN, BTP-IN: BTP-IC, BTP-Rhodanine: BTP-(4F) IC, BTP-Rhodanine: BTP-(4Cl) IC, BTP-Rhodanine: BTP-CPTCN and BTP-Rhodanine: BTP-IC, are designed, and their photovoltaic performance is simulated. The photovoltaic parameters $J_{sc}$, $V_{oc}$ and FF for all eight BHJ OSCs and their power conversion efficiency (PCE) are simulated. It is found that the BHJ OSC of the BTP-IN: BTP-CPTCN donor–acceptor blend gives the highest PCE (14.73%) and that of BTP-Rhodanine: BTP-(4F) IC gives the lowest PCE (12.07%). These results offer promising prospects for the fabrication of high-efficiency BHJ OSCs with the blend of both donor and acceptor based on the same core structure. Full article

Among short donor–acceptor molecules with a central benzothiadiazole fragment, 4,7-di-2-thienyl-2,1,3-benzothiadiazole (T-BTD) is one of the most well-known compounds, valued for its photophysical and semiconductor properties. We have synthesized a derivative of 4,7-di-2-thienyl-2,1,3-benzothiadiazole with trimethylsilyl end-substituents, 4,7-bis(5-(trimethylsilyl)thiophen-2-yl)benzothiadiazole (TMS-T-BTD). The phase transition parameters and thermal stability of T-BTD and TMS-T-BTD were investigated using DSC and TGA methods. The presence of the trimethylsilyl end-groups in TMS-T-BTD significantly enhances solubility, increases the melting temperature, and improves the resistance of TMS-T-BTD to evaporation in the liquid state. Single crystals of T-BTD and TMS-T-BTD were grown from solutions, with the largest sizes being 7 × 2 × 0.5 mm³ and 8 × 1 × 0.45 mm³, respectively. Using single-crystal X-ray diffraction at 293 K, the crystal structure of T-BTD was refined in the rhombic system (sp.gr. P_cab, Z = 8), while for TMS-T-BTD, it was determined for the first time in the monoclinic system (sp.gr. P2₁/c, Z = 4). The relationship between observed growth anisotropy and molecular packing in the crystals was analyzed. The results of investigations into the spectral-fluorescent properties of solutions in hexane and THF are presented. The solvatochromic effect was studied in a series of solvents, including hexane, THF, dichloromethane, and acetonitrile. The photostability of the compounds in hexane solutions was examined. It was found that the quantum yield of photodestruction for T-BTD is 13 times higher than that of TMS-T-BTD. The fluorescent properties of T-BTD and TMS-T-BTD crystals were investigated. Full article

Due to their structural and property tunability, semiconductive conjugated polymers (CPs) have emerged as promising candidates for photocatalytic water splitting. Compared with inorganic materials, the photocatalytic performance of mono-component polymers was limited by the fast recombination of photoexcited charge carriers, and they always needed to catch up to expectations. To this end, researchers established molecular donor–acceptor heterostructures, which could notably promote oxygen production efficiency due to their more effective charge carrier separation. In this work, easy Schiff base reactions between side-chain -CHO groups and terminal -NH₂ groups were used to introduce benzene and perylene diimide (PDI) into the molecular heterostructure to serve as electron donors (D) and electron acceptors (A). In particular, for the first time, we employed the molecular heterostructures of CPs to promote photocatalytic O₂ production. One prepared molecular heterostructure was demonstrated to improve oxygen generation rate (up to 0.53 mmol g⁻¹ h⁻¹) through visible light-driven water splitting. Interestingly, based on the photoelectric properties, a stepwise two-electron/two-electron pathway constituted the photocatalytic mechanism for oxygen production with the molecular heterostructure. These results provide insights into designing and fabricating high-performance molecular heterostructures for photocatalytic oxygen production. Full article

Organic solar cells (OSCs) made of electron-acceptor and electron-donor materials have significantly developed in the last decade, demonstrating their enormous potential in cutting-edge optoelectronic applications. Consequently, we designed seven novel non-fused ring electron acceptors (NFREAs) (BTIC-U1 to BTIC-U7) using synthesized electron-deficient diketone units and reported end-capped acceptors, a viable route for augmented optoelectronic properties. The DFT and TDDFT approaches were used to measure the power conversion efficiency (PCE), open circuit voltage (Voc), reorganization energies (λ_h, λ_e), fill factor (FF), light harvesting efficiency (LHE) and to evaluate the potential usage of proposed compounds in solar cell applications. The findings confirmed that the photovoltaic, photophysical, and electronic properties of the designed molecules BTIC-U1 to BTIC-U7 are superior to those of reference BTIC-R. The TDM analysis demonstrates a smooth flow of charge from the core to the acceptor groups. Charge transfer analysis of the BTIC-U1:PTB7-Th blend revealed orbital superposition and successful charge transfer from HOMO (PTB7-Th) to LUMO (BTIC-U1). The BTIC-U5 and BTIC-U7 outperformed the reference BTIC-R and other developed molecules in terms of PCE (23.29% and 21.18%), FF (0.901 and 0.894), normalized Voc (48.674 and 44.597), and Voc (1.261 eV and 1.155 eV). The proposed compounds enclose high electron and hole transfer mobilities, making them the ideal candidate for use with PTB7-Th film. As a result, future SM-OSC design should prioritize using these constructed molecules, which exhibit excellent optoelectronic properties, as superior scaffolds. Full article

Heat stress is a major concern for the growth of cool-season creeping bentgrass (Agrostis stolonifera L.). Nonetheless, there is a lack in a clear and systematic understanding of thermotolerance mechanisms for this species. This study aimed to assess heat tolerance in experimental lines and cultivars to determine important physiological and biochemical traits responsible for improved tolerance, including the use of OJIP fluorescence. Ten creeping bentgrass lines were exposed to either control (20/15 °C day/night) or high temperature (38/33 °C day/night) conditions for 35 d via growth chambers at Griffin, GA. Principal component analysis and clustering analysis were performed to rank stress performance and divide lines into different groups according to their tolerance similarities, respectively. At the end of the trial, S11 729-10 and BTC032 were in the most thermotolerant group, followed by a group containing BTC011, AU Victory and Penncross. Crenshaw belonged to the most heat-sensitive group while S11 675-02 and Pure Eclipse were in the second most heat-sensitive group. The exceptional thermotolerance in S11 729-10 and BTC032 was associated with their abilities to maintain cell membrane stability and protein metabolism, plus minimize oxidative damages. Additionally, among various light-harvesting steps, energy trapping, dissipation and electron transport from Q_A to PQ were more heat-sensitive than electron transport from Q_A to final PSI acceptors. Along with the strong correlations between multiple OJIP parameters and other traits, it reveals that OJIP fluorescence could be a valuable tool for dissection of photosynthetic processes and identification of the critical steps responsible for photosynthetic declines, enabling a more targeted heat-stress screening. Our results indicated that variability in the level of heat tolerance and associated mechanisms in creeping bentgrass germplasm could be utilized to develop new cultivars with improved thermotolerance. Full article

The synthesis of some novel donor-acceptor and acceptor-donor-acceptor systems containing a 2,2′-bi[3,2-b]thienothiophene donor block and various electron-accepting units is described alongside their photophysical properties studied using electrochemistry, optical spectroscopy and theoretical calculations. The obtained results show that the energy levels can be modulated by changing the strength of the acceptor unit. Among the three investigated end-groups, 1,1-dicyanomethylene-3-indanone exhibited the largest bathochromic shift and the lowest band gap suggesting the strongest electron-withdrawing character. Moreover, the emissive properties of the investigated systems vary greatly with the nature of the terminal group and are generally lower compared to their precursor aldehyde derivatives. Full article

The ARH family of ADP-ribose-acceptor hydrolases consists of three 39-kDa members (ARH1-3), with similarities in amino acid sequence. ARH1 was identified based on its ability to cleave ADP-ribosyl-arginine synthesized by cholera toxin. Mammalian ADP-ribosyltransferases (ARTCs) mimicked the toxin reaction, with ARTC1 catalyzing the synthesis of ADP-ribosyl-arginine. ADP-ribosylation of arginine was stereospecific, with β-NAD⁺ as substrate and, α-anomeric ADP-ribose-arginine the reaction product. ARH1 hydrolyzed α-ADP-ribose-arginine, in addition to α-NAD⁺ and O-acetyl-ADP-ribose. Thus, ADP-ribose attached to oxygen-containing or nitrogen-containing functional groups was a substrate. Arh1 heterozygous and knockout (KO) mice developed tumors. Arh1-KO mice showed decreased cardiac contractility and developed myocardial fibrosis. In addition to Arh1-KO mice showed increased ADP-ribosylation of tripartite motif-containing protein 72 (TRIM72), a membrane-repair protein. ARH3 cleaved ADP-ribose from ends of the poly(ADP-ribose) (PAR) chain and released the terminal ADP-ribose attached to (serine)protein. ARH3 also hydrolyzed α-NAD⁺ and O-acetyl-ADP-ribose. Incubation of Arh3-KO cells with H₂O₂ resulted in activation of poly-ADP-ribose polymerase (PARP)-1, followed by increased nuclear PAR, increased cytoplasmic PAR, leading to release of Apoptosis Inducing Factor (AIF) from mitochondria. AIF, following nuclear translocation, stimulated endonucleases, resulting in cell death by Parthanatos. Human ARH3-deficiency is autosomal recessive, rare, and characterized by neurodegeneration and early death. Arh3-KO mice developed increased brain infarction following ischemia-reperfusion injury, which was reduced by PARP inhibitors. Similarly, PARP inhibitors improved survival of Arh3-KO cells treated with H₂O₂. ARH2 protein did not show activity in the in vitro assays described above for ARH1 and ARH3. ARH2 has a restricted tissue distribution, with primary involvement of cardiac and skeletal muscle. Overall, the ARH family has unique functions in biological processes and different enzymatic activities. Full article

New low-bandgap unimers, with the central thiophene-(1-thioxophosphole)-thiophene (TPT) ring sequence and 2,2′:6′,2″-terpyridin-4′-yl (tpy) end groups connected to the central unit via conjugated linkers of different size, are prepared and assembled with Zn(II) and Fe(II) ions to metallo-supramolecular polymers (MSPs) that are studied regarding their properties. The most interesting feature of Zn-MSPs is the luminescence extended deep into the NIR region. Fe-MSPs not only show the metal-to-ligand charge transfer (MLCT) manifested by the MLCT band (an expected feature) but also an as-yet-undescribed remarkable phenomenon: specific damping of the bands of the TPT sequence in the resonance Raman spectra taken from solid Fe-MSPs using the excitation to the MLCT band (532 nm). The damping is highly reversible at the low laser power of 0.1 mW but gradually becomes irreversible as the power reaches ca. 5 mW. The revealed phenomenon is not shown by the same Fe-MSPs in solutions, nor by Fe-MSPs containing no phosphole units. A hypothesis is proposed that explains this phenomenon and its dependence on the irradiation intensity as a result of the interplay of three factors: (i) enhancement of the MLCT process by excitation radiation, (ii) the electron-acceptor character of the 1-thioxophosphole ring, and (iii) morphological changes of the lattice and their dependence on the population of new structures in the lattice. Full article