Search Results (36)

Accurate estimation of erupted lava volumes is essential for understanding volcanic processes, interpreting eruptive cycles, and assessing volcanic hazards. Traditional methods based on Mid-Infrared (MIR) satellite imagery require clear-sky conditions during eruptions and are prone to sensor saturation, limiting data availability. Here, we present an alternative approach based on the post-eruptive Thermal InfraRed (TIR) signal, using the recently proposed VRP_TIR method to quantify radiative energy loss during lava flow cooling. We identify thermally anomalous pixels in VIIRS I5 scenes (11.45 µm, 375 m resolution) using the TIRVolcH algorithm, this allowing the detection of subtle thermal anomalies throughout the cooling phase, and retrieve lava flow area by fitting theoretical cooling curves to observed VRP_TIR time series. Collating a dataset of 191 mafic eruptions that occurred between 2010 and 2025 at (i) Etna and Stromboli (Italy); (ii) Piton de la Fournaise (France); (iii) Bárðarbunga, Fagradalsfjall, and Sundhnúkagígar (Iceland); (iv) Kīlauea and Mauna Loa (United States); (v) Wolf, Fernandina, and Sierra Negra (Ecuador); (vi) Nyamuragira and Nyiragongo (DRC); (vii) Fogo (Cape Verde); and (viii) La Palma (Spain), we derive a new power-law equation describing mafic lava flow thickening as a function of time across five orders of magnitude (from 0.02 Mm³ to 5.5 km³). Finally, from knowledge of areas and episode durations, we estimate erupted volumes. The method is validated against 68 eruptions with known volumes, yielding high agreement (R² = 0.947; ρ = 0.96; MAPE = 28.60%), a negligible bias (MPE = −0.85%), and uncertainties within ±50%. Application to the February-March 2025 Etna eruption further corroborates the robustness of our workflow, from which we estimate a bulk erupted volume of 4.23 ± 2.12 × 10⁶ m³, in close agreement with preliminary estimates from independent data. Beyond volume estimation, we show that VRP_TIR cooling curves follow a consistent decay pattern that aligns with established theoretical thermal models, indicating a stable conductive regime during the cooling stage. This scale-invariant pattern suggests that crustal insulation and heat transfer across a solidifying boundary govern the thermal evolution of cooling basaltic flows. Full article

Every year about fifty volcanoes erupt on average, posing a serious threat for populations living in the neighboring areas. To mitigate the volcanic risk, many satellite monitoring systems have been developed. Information from the medium infrared (MIR) and thermal infrared (TIR) bands of sensors such as the Moderate Resolution Imaging Spectroradiometer (MODIS) and the Visible Infrared Imaging Radiometer Suite (VIIRS) is commonly exploited for this purpose. However, the potential of daytime shortwave infrared (SWIR) observations from the Sea and Land Surface Temperature Radiometer (SLSTR) aboard Sentinel-3 satellites in supporting the near-real-time monitoring of thermal volcanic activity has not been fully evaluated so far. In this work, we assess this potential by exploring the contribution of a normalized hotspot index (NHI) in the monitoring of the recent Home Reef (Tonga Islands) eruption. By analyzing the time series of the maximum NHI_SWIR value, computed over the Home Reef area, we inferred information about the waxing/waning phases of lava effusion during four distinct subaerial eruptions. The results indicate that the first eruption phase (September–October 2022) was more intense than the second one (September–November 2023) and comparable with the fourth eruptive phase (June–August 2024) in terms of intensity level; the third eruption phase (January 2024) was more difficult to investigate because of cloudy conditions. Moreover, by adapting the NHI algorithm to daytime SLSTR SWIR data, we found that the detected thermal anomalies complemented those in night-time conditions identified and quantified by the operational Level 2 SLSTR fire radiative power (FRP) product. This study demonstrates that NHI-based algorithms may contribute to investigating active volcanoes located even in remote areas through SWIR data at 500 m spatial resolution, encouraging the development of an automated processing chain for the near-real-time monitoring of thermal volcanic activity by means of night-time/daytime Sentinel-3 SLSTR data. Full article

In volcanic regions, the analysis of Thermal InfraRed (TIR) satellite imagery for Land Surface Temperature (LST) retrieval is a valid technique to detect ground thermal anomalies. This allows us to achieve rapid characterization of the shallow thermal field, supporting ground surveillance networks in monitoring volcanic activity. However, surface temperature can be influenced by processes of different natures, which interact and mutually interfere, making it challenging to interpret the spatio-temporal variations in the LST parameter. In this paper, we use a workflow to detect the main thermal patterns in active volcanic areas by analyzing the Independent Component Analysis (ICA) results applied to satellite nighttime TIR imagery time series. We employed the proposed approach to study the surface temperature distribution at the Campi Flegrei caldera volcanic site (Southern Italy, Naples) during the 2013–2022 time interval. The results revealed the contribution of four main distinctive thermal patterns, which reflect the endogenous processes occurring at the Solfatara crater, the environmental processes affecting the Agnano plain, the unique microclimate of the Astroni crater, and the morphoclimatic aspects of the entire volcanic area. Full article

Naples is the most densely populated Italian city (7744 inhabitants per km²). It is located in a particular geological context: the presence of Mt Vesuvius characterizes the eastern part, and the western part is characterized by the presence of the Phlegrean Fields, making Naples a high-geothermal-gradient region. This endogenous heat, combined with the anthropogenic heat due to intense urbanization, has defined Naples as an ideal location for Surface Urban Heat Island (SUHI) analysis. SUHI analysis was effectuated by acquiring the Land Surface Temperature (LST) over Naples municipality by processing Landsat 8 (L8) Thermal Infrared Sensor (TIRS) images in the 2013–2023 time series by employing Google Earth Engine (GEE). In GEE, two different approaches have been followed to analyze thermal images, starting from the Statistical Mono Window (SMW) algorithm, which computes the LST based on the brightness temperature (Tb), the emissivity value, and the atmospheric correction coefficients. The first one is used for the LST retrieval from daytime images; here, the emissivity component is derived using, firstly, the Normalized Difference Vegetation Index (NDVI) and then the Vegetation Cover Method (VCM), defining the Land Surface Emissivity (LSɛ), which considers solar radiation as the main source of energy. The second approach is used for the LST retrieval from nighttime images, where the emissivity is directly estimated from the Advance Spaceborne Thermal Emission Radiometer database (ASTER-GED), as, during nighttime without solar radiation, the main source of energy is the energy emitted by the Earth’s surface. From these two different algorithms, 123 usable daytime and nighttime LST images were downloaded from GEE and analyzed in Quantum GIS (QGIS). The results show that the SUHI is more concentrated in the eastern part, characterized by intense urbanization, as shown by the Corine Land Cover (CLC). At the same time, lower SUHI intensity is detected in the western part, defined by the Land Cover (LC) vegetated class. Also, in the analysis, we highlighted 40 spots (10 hotspots and 10 coldspots, both for daytime and nighttime collection) that present positive or negative temperature peaks for all the time series. Due to the huge amount of data, this work considered only the five representative spots that were most representative for SUHI analysis and determination of thermal anomalies in the urban environment. Full article

The management of the increasing volume of municipal solid waste is an essential activity for the health of the environment and of the population. The organic matter of waste deposited in landfills is subject to aerobic decomposition processes, bacterial aerobic decomposition, and chemical reactions that release large amounts of heat, biogas, and leachates at high temperatures. The control of these by-products enables their recovery, utilization, and treatment for energy use, avoiding emissions to the environment. UAVs with low-cost thermal sensors are a tool that enables the representation of temperature distributions for the thermal control of landfills. This study focuses on the development of a methodology for the generation of 3D thermal models through the projection of TIR image information onto a 3D model generated from RGB images and the identification of thermal anomalies by means of photointerpretation and GIS analysis. The novel methodological approach was implemented at the Meruelo landfill for validation. At the facility, a 4D model (X,Y,Z-temperature) and a 13.8 cm/px GSD thermal orthoimage were generated with a thermal accuracy of 1.63 °C, which enabled the identification of at least five areas of high temperatures associated with possible biogas emissions, decomposing organic matter, or underground fires, which were verified by on-site measurements and photointerpretation of the RGB model, in order to take and assess specific corrective measures. Full article

The latest generation of high-spatial-resolution satellites produces measurements of high-temperature volcanic features at global scale, which are valuable to monitor volcanic activity. Recent advances in technology and increased computational resources have resulted in an extraordinary amount of monitoring data, which can no longer be so readily examined. Here, we present an automatic detection algorithm based on a deep convolutional neural network (CNN) that uses infrared satellite data to automatically determine the presence of volcanic thermal activity. We exploit the potentiality of the transfer learning technique to retrain a pre-trained SqueezeNet CNN to a new domain. We fine-tune the weights of the network over a new dataset opportunely created with images related to thermal anomalies of different active volcanoes around the world. Furthermore, an ensemble approach is employed to enhance accuracy and robustness when compared to using individual models. We chose a balanced training dataset with two classes, one containing volcanic thermal anomalies (erupting volcanoes) and the other containing no thermal anomalies (non-erupting volcanoes), to differentiate between volcanic scenes with eruptive and non-eruptive activity. We used satellite images acquired in the infrared bands by ESA Sentinel-2 Multispectral Instrument (MSI) and NASA & USGS Landsat 8 Operational Land Imager and Thermal InfraRed Sensor (OLI/TIRS). This deep learning approach makes the model capable of identifying the appearance of a volcanic thermal anomaly in the images belonging to the volcanic domain with an overall accuracy of 98.3%, recognizing the scene with active flows and erupting vents (i.e., eruptive activity) and the volcanoes at rest. This model is generalizable, and has the capability to analyze every image captured by these satellites over volcanoes around the world. Full article

Hyperspectral anomaly detection (HAD), which is widely used in military and civilian fields, aims to detect the pixels with large spectral deviation from the background. Recently, collaborative representation using union dictionary (CRUD) was proved to be effective for achieving HAD. However, the existing CRUD detectors generally only use the spatial or spectral information to construct the union dictionary (UD), which possibly causes a suboptimal performance and may be hard to use in actual scenarios. Additionally, the anomalies are treated as salient relative to the background in a hyperspectral image (HSI). In this article, a HAD method using spatial–spectral-based UD and improved saliency weight (SSUD-ISW) is proposed. To construct robust UD for each testing pixel, a spatial-based detector, a spectral-based detector and superpixel segmentation are jointly considered to yield the background set and anomaly set, which provides pure and representative pixels to form a robust UD. Differently from the conventional operation that uses the dual windows to construct the background dictionary in the local region and employs the RX detector to construct the anomaly dictionary in a global scope, we developed a robust UD construction strategy in a nonglobal range by sifting the pixels closest to the testing pixel from the background set and anomaly set to form the UD. With a preconstructed UD, a CRUD is performed, and the product of the anomaly dictionary and corresponding representation coefficient is explored to yield the response map. Moreover, an improved saliency weight is proposed to fully mine the saliency characteristic of the anomalies. To further improve the performance, the response map and saliency weight are combined with a nonlinear fusion strategy. Extensive experiments performed on five datasets (i.e., Salinas, Texas Coast, Gainesville, San Diego and SpecTIR datasets) demonstrate that the proposed SSUD-ISW detector achieves the satisfactory AUC_df values (i.e., 0.9988, 0.9986, 0.9939, 0.9945 and 0.9997), as compared to the comparative detectors whose best AUC_df values are 0.9938, 0.9956, 0.9833, 0.9919 and 0.9991. Full article

Fire is one of the natural agents with the greatest impact on the terrestrial ecosystem and plays an important ecological role in a large part of the terrestrial surface. Remote sensing is an important technique applied in mapping and monitoring changes in forest landscapes affected by fires. This study presents a spectral separability analysis for the detection of burned areas using Landsat-8 OLI/TIRS images in the context of fires that occurred in different biomes of Brazil (dry ecosystem) and Portugal (temperate forest). The research is based on a fusion of spectral indices and automatic classification algorithms scientifically proven to be effective with as little human interaction as possible. The separability index (M) and the Reed–Xiaoli automatic anomaly detection classifier (RXD) allowed the evaluation of the spectral separability and the thematic accuracy of the burned areas for the different spectral indices tested (Burn Area Index (BAI), Normalized Burn Ratio (NBR), Mid-Infrared Burn Index (MIRBI), Normalized Burn Ratio 2 (NBR2), Normalized Burned Index (NBI), and Normalized Burn Ratio Thermal (NBRT)). The analysis parameters were based on spatial dispersion with validation data, commission error (CE), omission error (OE), and the Sørensen–Dice coefficient (DC). The results indicated that the indices based exclusively on the SWIR1 and SWIR2 bands showed a high degree of separability and were more suitable for detecting burned areas, although it was observed that the characteristics of the soil affected the performance of the indices. The classification method based on bitemporal anomalous changes using the RXD anomaly proved to be effective in increasing the burned area in terms of temporal alteration and performing unsupervised detection without relying on the ground truth. On the other hand, the main limitations of RXD were observed in non-abrupt changes, which is very common in fires with low spectral signal, especially in the context of using Landsat-8 images with a 16-day revisit period. The results obtained in this work were able to provide critical information for fire mapping algorithms and for an accurate post-fire spatial estimation in dry ecosystems and temperate forests. The study presents a new comparative approach to classify burned areas in dry ecosystems and temperate forests with the least possible human interference, thus helping investigations when there is little available data on fires in addition to favoring a reduction in fieldwork and gross errors in the classification of burned areas. Full article

The harsh environment of high-latitude areas with large amounts of snow and ice cover makes it difficult to carry out full geological field surveys. Uranium resources are abundant within the Ilimaussaq Complex in the Narsaq region of Greenland, where the uranium ore body is strictly controlled by the Lujavrite formation, which is the main ore-bearing rock in the complex rock mass. Further, large aggregations of radioactive minerals appear as thermal anomalies on remote sensing thermal infrared imagery, which is indicative of deposits of highly radioactive elements. Using a weight-of-evidence analysis method that combines machine-learned lithological classification information with information on surface temperature thermal anomalies, the prediction of radioactive element-bearing deposits at high latitudes was carried out. Through the use of Worldview-2 (WV-2) remote sensing images, support vector machine algorithms based on texture features and topographic features were used to identify Lujavrite. In addition, the distribution of thermal anomalies associated with radioactive elements was inverted using Landsat 8 TIRS thermal infrared data. From the results, it was found that the overall accuracy of the SVM algorithm-based lithology mapping was 89.57%. The surface temperature thermal anomaly had a Spearman correlation coefficient of 0.63 with the total airborne measured uranium gamma radiation. The lithological classification information was integrated with surface temperature thermal anomalies and other multi-source remote sensing mineralization elements to calculate mineralization-favorable areas through a weight-of-evidence model, with high-value mineralization probability areas being spatially consistent with known mineralization areas. In conclusion, a multifaceted remote sensing information finding method, focusing on surface temperature thermal anomalies in high-latitude areas, provides guidance and has reference value for the exploration of potential mineralization areas for deposits containing radioactive elements. Full article

Spaceborne detection and measurements of high-temperature thermal anomalies enable monitoring and forecasts of lava flow propagation. The accuracy of such thermal estimates relies on the knowledge of input parameters, such as emissivity, which notably affects computation of temperature, radiant heat flux, and subsequent analyses (e.g., effusion rate and lava flow distance to run) that rely on the accuracy of observations. To address the deficit of field and laboratory-based emissivity data for inverse and forward modelling, we measured the emissivity of ‘a’a lava samples from the 2001 Mt. Etna eruption, over the wide range of temperatures (773 to 1373 K) and wavelengths (2.17 to 21.0 µm). The results show that emissivity is not only wavelength dependent, but it also increases non-linearly with cooling, revealing considerably lower values than those typically assumed for basalts. This new evidence showed the largest and smallest increase in average emissivity during cooling in the MIR and TIR regions (~30% and ~8% respectively), whereas the shorter wavelengths of the SWIR region showed a moderate increase (~15%). These results applied to spaceborne data confirm that the variable emissivity-derived radiant heat flux is greater than the constant emissivity assumption. For the differences between the radiant heat flux in the case of variable and constant emissivity, we found the median value is 0.06, whereas the 25th and the 75th percentiles are 0.014 and 0.161, respectively. This new evidence has significant impacts on the modelling of lava flow simulations, causing a dissimilarity between the two emissivity approaches of ~16% in the final area and ~7% in the maximum thickness. The multicomponent emissivity input provides means for ‘best practice’ scenario when accurate data required. The novel approach developed here can be used to test an improved version of existing multi-platform, multi-payload volcano monitoring systems. Full article

Submarine Groundwater Discharge (SGD) is an essential process of the hydrological cycle by hydraulically connecting the land and sea. However, the occurrence, importance and effects of SGD remain largely underexplored. Here, we developed and validated a straightforward tool for mapping potential SGD areas in coastal ecosystems of Portugal. Our approach was based on the premise that relatively cooler groundwater discharging to warmer coastal waters manifests in the thermal band of satellite imagery acquired during the summer months. We then used Landsat 8 thermal infrared imagery (TIR) to derive sea surface temperature and standardized temperature anomalies maps. The results confirmed the capacity of TIR remote sensing for identifying SGD areas. The thermal analysis enabled us to acquire a useful visual-spatial correlation between the location of thermal anomalies and potentiometric surfaces of coastal aquifers. This way, over 20 potential SGD areas were identified. Our study makes an important contribute to our current SGD research status by developing a cost-efficient tool which can be used as a first level approach for large areas. Further investigation is needed to quantify the SGD and its potential effect in the receiving ecosystems, especially those located within environmentally protected areas. Full article

The paper provides, for the first time, a long-term (>10 years) analysis of anomalous transients in Earth’s emitted radiation over Turkey and neighbouring regions. The RST (Robust Satellite Techniques) approach is used to identify Significant Sequences of Thermal Anomalies (SSTAs) over about 12 years (May 2004 to October 2015) of night-time MSG-SEVIRI satellite images. The correlation analysis is performed with earthquakes with M ≥ 4, which occurred in the investigated period/region within a pre-defined space-time volume around SSTA occurrences. It confirms, also for Turkey, the possibility to qualify SSTAs among the candidate parameters of a multi-parametric system for time-Dependent Assessment of Seismic Hazard (t-DASH). After analysing about 4000 images (about 400 million of single satellite records), just 155 SSTAs (about 4 every 100 images) were isolated; 115 (74% out of the total) resulted in earthquake-related (false-positive rate 26%). Results of the error diagram confirms a non-casual correlation between RST-based SSTAs and earthquake occurrences, with probability gain values up to 2.2 in comparison with the random guess. The analysis, separately performed on Turkish areas characterized by different faults and earthquakes densities, demonstrates the SSTA correlation with a dynamic seismicity more than with static tectonic settings. Full article

One of the most prominent tourist destinations in the Adriatic coast, the city of Opatija, is facing a problem concerning seasonal drinking water shortages. The existing water resources are no longer sufficient, and attention is being given to alternative resources such as the underlying karstic aquifer and several coastal springs in the city itself. However, the water potential of the area still cannot be estimated due to the insufficient hydrological data. The goal of this research was to evaluate the use of thermal infrared (TIR) remote sensing as the source of valuable information that will improve our understanding of the groundwater discharge dynamics. Ten Landsat ETM+ (enhanced thematic mapper plus) and two Landsat TM (thematic mapper) images of the north Adriatic, recorded during 1999–2004 at the same time as the field discharge measurements, were used to derive sea surface temperature (SST) and to analyze freshwater outflows seen as the thermal anomaly in the TIR images. The approach is based on finding the functional relationship between the size of the freshwater thermal signatures and the measured discharge data, and to estimate the water potential of the underlying aquifer. It also involved analyzing the possible connection between the adjusted size of the spring’s thermal signatures and groundwater level fluctuations in the deeper karst hinterland. The proposed methodology resulted in realistic discharge estimates, as well as a good fit between thermal anomalies with measured discharges and the groundwater level. It should be emphasized that the results are site specific and based on a limited data set. However, they confirm that the proposed method can provide additional information on groundwater outflow dynamics and coastal springs’ freshwater quantification. Full article

In this work, the land surface temperature time series derived using Thermal InfraRed (TIR) satellite data offers the possibility to detect thermal anomalies by using the PCA method. This approach produces very detailed maps of thermal anomalies, both in geothermal areas and in urban areas. Tests were conducted on the following three Italian sites: Solfatara-Campi Flegrei (Naples), Parco delle Biancane (Grosseto) and Modena city. Full article

The RST (Robust Satellite Techniques) approach is a multi-temporal scheme of satellite data analysis widely used to investigate and monitor thermal volcanic activity from space through high temporal resolution data from sensors such as the Moderate Resolution Imaging Spectroradiometer (MODIS), and the Spinning Enhanced Visible and Infrared Imager (SEVIRI). In this work, we present the results of the preliminary RST algorithm implementation to thermal infrared (TIR) data, at 90 m spatial resolution, from the Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER). Results achieved under the Google Earth Engine (GEE) environment, by analyzing 20 years of satellite observations over three active volcanoes (i.e., Etna, Shishaldin and Shinmoedake) located in different geographic areas, show that the RST-based system, hereafter named RASTer, detected a higher (around 25% more) number of thermal anomalies than the well-established ASTER Volcano Archive (AVA). Despite the availability of a less populated dataset than other sensors, the RST implementation on ASTER data guarantees an efficient identification and mapping of volcanic thermal features even of a low intensity level. To improve the temporal continuity of the active volcanoes monitoring, the possibility of exploiting RASTer is here addressed, in the perspective of an operational multi-satellite observing system. The latter could include mid-high spatial resolution satellite data (e.g., Sentinel-2/MSI, Landsat-8/OLI), as well as those at higher-temporal (lower-spatial) resolution (e.g., EOS/MODIS, Suomi-NPP/VIIRS, Sentinel-3/SLSTR), for which RASTer could provide useful algorithm’s validation and training dataset. Full article