Search Results (639)

With global climate change, urbanization, and agricultural resource limitations, precision agriculture and crop monitoring are crucial worldwide. Integrating multi-source remote sensing data with deep learning enables accurate crop mapping, but selecting optimal network architectures remains challenging. To improve remote sensing-based fruit planting classification and support orchard management and rural revitalization, this study explored feature selection and network optimization. We proposed an improved CF-EfficientNet model (incorporating FGMF and CGAR modules) for fruit planting classification. Multi-source remote sensing data (Sentinel-1, Sentinel-2, and SRTM) were used to extract spectral, vegetation, polarization, terrain, and texture features, thereby constructing a high-dimensional feature space. Feature selection identified 13 highly discriminative bands, forming an optimal dataset, namely the preferred bands (PBs). At the same time, two classification datasets—multi-spectral bands (MS) and preferred bands (PBs)—were constructed, and five typical deep learning models were introduced to compare performance: (1) EfficientNetB0, (2) AlexNet, (3) VGG16, (4) ResNet18, (5) RepVGG. The experimental results showed that the EfficientNetB0 model based on the preferred band performed best in terms of overall accuracy (87.1%) and Kappa coefficient (0.677). Furthermore, a Fine-Grained Multi-scale Fusion (FGMF) and a Condition-Guided Attention Refinement (CGAR) were incorporated into EfficientNetB0, and the traditional SGD optimizer was replaced with Adam to construct the CF-EfficientNet architecture. The results indicated that the improved CF-EfficientNet model achieved high performance in crop classification, with an overall accuracy of 92.6% and a Kappa coefficient of 0.830. These represent improvements of 5.5 percentage points and 0.153, compared with the baseline model, demonstrating superiority in both classification accuracy and stability. Full article

This study introduces the Normalized Difference Gamma Ray Index (NDGRI), a novel spectral composite derived from Sentinel 2 imagery for mapping elevated natural gamma radiation in semi-arid and arid basins. We hypothesized that water-sensitive spectral indices correlate with gamma-ray hotspots in arid regions of Mongolia, where natural radionuclide distribution is influenced by hydrological processes. Leveraging historical car-borne gamma spectrometry data collected in 2008 across the Sainshand and Zuunbayan uranium project areas, we evaluated twelve spectral bands and five established moisture-sensitive indices against radiation heatmaps in Naarst and Zuunbayan. Using Pearson and Spearman correlations alongside two percentile-based overlap metrics, indices were weighted to yield a composite performance score. The best performing indices (MI—Moisture Index and NDSII_1—Normalized Difference Snow and Ice Index) guided the derivation of ten new ND constructs incorporating SWIR bands (B11, B12) and visible bands (B4, B8A). The top performer, NDGRI = (B4 − B12)/(B4 + B12) achieved a precision of 62.8% for detecting high gamma-radiation areas and outperformed benchmarks of other indices. We established climatological screening criteria to ensure NDGRI reliability. Validation at two independent sites (Erdene, Khuvsgul) using 2008 airborne gamma ray heatmaps yielded 76.41% and 85.55% spatial overlap accuracy, respectively. Our results demonstrate that NDGRI effectively delineates gamma radiation hotspots where moisture-controlled spectral contrasts prevail. The index’s stringent acquisition constraints, however, limit the temporal availability of usable scenes. NDGRI offers a rapid, cost-effective remote sensing tool to prioritize ground surveys in uranium prospective basins and may be adapted for other radiometric applications in semi-arid and arid regions. Full article

The emergence of H5N1 highly pathogenic avian influenza virus (HPAIV) clade 2.3.4.4b in dairy cattle across multiple U.S. states in early 2024 marks a major shift in the virus’s host range and epidemiological profile. Traditionally limited to bird species, the ongoing detection of H5N1 in cattle, a mammalian host not previously considered vulnerable, raises urgent animal and human health concerns about zoonoses and mammalian adaptation. We assessed the feasibility of using commercially available pasteurized milk as a sentinel matrix for the molecular detection and genetic characterization of H5N1 HPAIV. Our aim was to determine whether retail milk could serve as a practical tool for virological monitoring and to evaluate the use of full-length genome segment amplification for extracting genomic sequence information from this highly processed matrix. Our results link HPAIV sequences in store-bought milk to the cattle outbreak and highlight both the potential and the limitations of retail milk as a surveillance window. Together, these findings provide evidence that influenza A virus RNA can be repeatedly detected in retail milk in patterns linked to specific supply chains, with genomic data confirming close relationships with the viruses circulating in cattle. Full article

Parametric optimization/inversion of Interferometric Synthetic Aperture Radar (InSAR) measurements enables the modeling of the volcanic deformation source by considering the approximation of the analytic formulations or by defining refined scenarios within a Finite Element (FE) framework. However, the geodetic data modeling can lead to ambiguous solutions when constraints are unavailable, turning out to be time-consuming. In this work, we use an integrated multiscale approach for retrieving the geometric parameters of volcanic deformation sources and then constraining a Monte Carlo optimization of FE parametric modeling. This approach allows for contemplating more physically complex scenarios and more robust statistical solutions, and significantly decreasing computing time. We propose the Campi Flegrei caldera (CFc) case study, considering the 2019–2022 uplift phenomenon observed using Sentinel-1 satellite images. The workflow firstly consists of applying the Multiridge and ScalFun methods, and Total Horizontal Derivative (THD) technique to determine the position and horizontal sizes of the deformation source. We then perform two independent cycles of parametric FE optimization by keeping (I) all the parameters unconstrained and (II) constraining the source geometric parameters. The results show that the innovative application of the integrated multiscale approach improves the performance of the FE parametric optimization in proposing a reliable interpretation of volcanic deformations, revealing that (II) yields statistically more reliable solutions than (I) in an extraordinary tenfold reduction in computing time. Finally, the retrieved solution at CFc is an oblate-like source at approximately 3 km b.s.l. embedded in a heterogeneous crust. Full article

Synthetic Aperture Radar (SAR) is one of the few instruments capable of providing high-resolution global two-dimensional (2D) measurements of ocean waves. Since 2014 and then 2016, the Sentinel-1A/B satellites, whenever operating in a specific wave mode (WV), have been providing ocean swell spectrum data as Level-2 (L2) OCeaN products (OCN), derived through a quasi-linear inversion process. This WV acquires small SAR images of 20 × 20 km footprints alternating between two sub-beams, WV1 and WV2, with incidence angles of approximately 23° and 36°, respectively, to capture ocean surface dynamics. The SAR imaging process is influenced by various modulations, including hydrodynamic, tilt, and velocity bunching. While hydrodynamic and tilt modulations can be approximated as linear processes, velocity bunching introduces significant distortion due to the satellite’s relative motion with respect to the ocean surface and leads to constructive but also destructive effects on the wave imaging process. Due to the associated azimuth cut-off, the quasi-linear inversion primarily detects ocean swells with, on average, wavelengths longer than 200 m in the SAR azimuth direction, limiting the resolution of smaller-scale wave features in azimuth but reaching 10 m resolution along range. The 2D spectral partitioning technique used in the Sentinel-1 WV OCN product separates different swell systems, known as partitions, based on their frequency, directional, and spectral characteristics. The accuracy of these partitions can be affected by several factors, including non-linear effects, large-scale surface features, and the relative direction of the swell peak to the satellite’s flight path. To address these challenges, this study proposes a novel quality control framework using a machine learning (ML) approach to develop a quality flag (QF) parameter associated with each swell partition provided in the OCN products. By pairing collocated data from Sentinel-1 (S1) and WaveWatch III (WW3) partitions, the QF parameter assigns each SAR-derived swell partition one of five quality levels: “very good,” “good,” “medium,” “low,” or “poor”. This ML-based method enhances the accuracy of wave partitions, especially in cases where non-linear effects or large-scale oceanic features distort the data. The proposed algorithm provides a robust tool for filtering out problematic partitions, improving the overall quality of ocean wave measurements obtained from SAR. Moreover, the variability in the accuracy of swell partitions, depending on the swell direction relative to the satellite’s flight heading, is effectively addressed, enabling more reliable data for oceanographic studies. This work contributes to a better understanding of ocean swell dynamics derived from SAR observations and supports the numerical swell modeling community by aiding in the refinement of models and their integration into operational systems, thereby advancing both theoretical and practical aspects of ocean wave forecasting. Full article

Remote sensing offers an effective alternative for estimating mangrove carbon stocks by analyzing the relationship between satellite pixel values and field-based carbon measurements. This research was carried out in the mangrove forests of western Bali, Indonesia, encompassing three areas situated in a non-conservation mangrove forest area. This study assessed 32 remote sensing vegetation indices derived from Sentinel-2 satellite imagery to identify the optimal model for quantifying the above-ground carbon (Cag) content in mangrove ecosystems. Field data were collected using stratified random sampling and were used to develop regression models linking the Cag with vegetation indices. The Simple Ratio (SR) index exhibited the highest correlation (r = 0.847, R² = 0.707), while the Three Index Vegetation Above-Ground Carbon (TrIVCag) model, combining the SR, Specific Leaf Area Vegetation Index (SLAVI), and Transformed Ratio Vegetation Index (TRVI) indices, achieved the best performance (r = 0.870, R² = 0.728). The model validation results confirmed the reliability of the TrIVCag model, as indicated by a correlation of 0.852 between the model estimates and measured Cag values from independent field data. In 2023, the mangrove area in western Bali (excluding West Bali National Park) was estimated at 376.85 ha, with a total above-ground carbon stock of 34,994.55 tonC/ha. Region A had the highest average Cag at 98.97 tonC/ha, followed by Regions B (66.58 tonC/ha) and C (86.98 tonC/ha). This model offers a practical and scalable approach to carbon monitoring and is expected to play a valuable role in supporting blue carbon conservation efforts and contributing to climate change mitigation. Full article

Aboveground biomass (AGB) serves as a crucial indicator for assessing vegetation carbon sequestration capacity. While AGB levels vary significantly across different vegetation types and regions, the spatial distribution of AGB for specific wetland communities remains poorly characterized. To address this, we integrated field-collected data with Sentinel-2 spectral bands and remote sensing indices, employing random forest (RF) regression and Backpropagation Neural Network (BPNN) for AGB modeling. Through comparative evaluation of their inversion performance, the optimal model was selected to estimate vegetation AGB in the Nanji Wetland. By incorporating wetland classification data, we further generated spatial distribution maps of AGB for four dominant vegetation types during the dry season. The main findings are as follows. Important variables for the RF model included spectral bands B12, B11, B3, B2, B9, B1, B8, B6, and B4 and the Modified Normalized Difference Water Index (MNDWI), Normalized Difference Water Index (NDWI), Kernel Normalized Difference Vegetation Index (KNDVI), and Simple Ratio Index (SR). RF demonstrated significantly higher predictive accuracy (R² = 0.945, RMSE = 109.205 g·m⁻²) compared to the BPNN (R² = 0.821, RMSE = 176.025 g·m⁻²). The total estimated AGB reached 4.03 × 10⁹ g; Carex spp. dominated AGB accumulation (1.49 × 10⁹ g), followed by P. australis spp. (6.69 × 10⁸ g), M. lutarioriparius spp. (4.60 × 10⁸ g), and Polygonum spp. (3.61 × 10⁸ g). The AGB exhibited a clear spatial gradient, decreasing from higher-elevation lakeshore areas towards the central lake. The results provide detailed spatial quantification of AGB stocks across dominant vegetation types, revealing distinct spatial characteristics and interspecies variations in AGB. This study offers a valuable baseline and methodological framework for monitoring wetland carbon dynamics. Full article

Air moving-target detection is crucial for national defense, civil aviation, and airspace supervision. Spaceborne synthetic aperture radar (SAR) provides high-resolution, continuous observations for this task, but faces challenges including target attitude variation-induced weak signals and Doppler defocusing from targets’ high-speed motion, which hinder target-background separation. To address this, we propose a novel method combining sub-aperture segmentation with GoDec+ low-rank decomposition to enhance signal-to-noise ratio and suppress defocusing. Critically, ADS-B flight data is integrated as ground truth for spatio-temporal validation. Experiments using Sentinel-1 SM mode SLC imagery across farmland, forest, and mountainous regions confirm the method’s effectiveness and robustness in real airspace scenarios. Full article

Bathymetry, the measurement of water depth and underwater terrain, is vital for scientific, commercial, and environmental applications. Traditional methods like shipborne echosounders are costly and inefficient in shallow waters due to limited spatial coverage and accessibility. Emerging technologies such as satellite imagery, drones, and spaceborne LiDAR offer cost-effective and efficient alternatives. This research explores integrating multi-sensor datasets to enhance bathymetric mapping in coastal and inland waters by leveraging each sensor’s strengths. The goal is to improve spatial coverage, resolution, and accuracy over traditional methods using data fusion and machine learning. Gülbahçe Bay in İzmir, Turkey, serves as the study area. Bathymetric modeling uses Sentinel-2, Göktürk-1, and aerial imagery with varying resolutions and sensor characteristics. Model calibration evaluates independent and integrated use of single-beam echosounder (SBE) and satellite-based LiDAR (ICESat-2) during training. After preprocessing, Random Forest and Extreme Gradient Boosting algorithms are applied for bathymetric inference. Results are assessed using accuracy metrics and IHO CATZOC standards, achieving A1 level for 0–10 m, A2/B for 0–15 m, and C level for 0–20 m depth intervals. Full article

Addressing limitations in remote sensing irrigation monitoring (insufficient resolution, single-source constraints, poor terrain adaptability), this study developed a high-precision identification framework for Jianping County, China, a semi-arid region. We integrated Sentinel-1 SAR (VV/VH), Sentinel-2 multispectral, and MOD11A1 land surface temperature data. Savitzky–Golay (S-G) filtering reconstructed time-series datasets for NDVI, SAVI, TVDI, and VV/VH backscatter coefficients. Irrigation mapping employed random forest (RF), Support Vector Machine (SVM), and K-Nearest Neighbors (KNN) algorithms. Key results demonstrate the following. (1) RF achieved superior performance with overall accuracies of 91.00% (2022), 88.33% (2023), and 87.78% (2024), and Kappa coefficients of 86.37%, 80.96%, and 80.40%, showing minimal deviation (0.66–3.44%) from statistical data; (2) SAVI and VH exhibited high irrigation sensitivity, with peak differences between irrigated/non-irrigated areas reaching 0.48 units (SAVI, July–August) and 2.78 dB (VH); (3) cropland extraction accuracy showed <3% discrepancy versus governmental statistics. The “Multi-temporal Feature Fusion + S-G Filtering + RF Optimization” framework provides an effective solution for precision irrigation monitoring in complex semi-arid environments. Full article

In satellite altimetry calibration, the atmosphere’s integrated water vapor content has been customarily derived through the Global Navigation Satellite Systems (GNSS), principally over land where the satellite radiometer is not operational. Progressively, several alternative methods have emerged to estimate this wet troposphere component with ground instruments, alternative satellite sensors, and global models. For any ground calibration facility, integration of various approaches is required to arrive at an optimum value of a calibration constituent and in accordance with the strategy of Fiducial Reference Measurements (FRM). In this work, different estimation methods and instruments are evaluated for wet troposphere delays, especially when transponder and corner reflectors are employed at the Permanent Facility for Altimetry Calibration of the European Space Agency. Evaluation includes, first, ground instruments with microwave radiometers and radiosondes; second, satellite sensors with the Ocean Land Color Instrument (OLCI) and the Sea Land Surface Temperature Radiometer (SLSTR) of the Copernicus Sentinel-3 altimeter, as well as the TROPOMI spectrometer on the Sentinel-5P satellite; and finally with global atmospheric models, such as the European Center for Medium-Range Weather Forecasts. Along these lines, multi-sensor and redundant values for the troposphere delays are thus integrated and used for the calibration of Sentinel-6 MF and Sentinel-3A/B satellite altimeters. All in all, the integrated water vapor value of the troposphere is estimated with an FRM uncertainty of ±15 mm. In the absence of GNSS stations, it is recommended that the OLCI and SLSTR measurements be used for determining tropospheric delays in daylight and night operations, respectively. Ground microwave radiometers can also be used to retrieve tropospheric data with high temporal resolution and accuracy, provided that they are properly installed and calibrated and operated with site-specific parameters. Finally, the synergy of ground radiometers with instruments on board other Copernicus satellites should be further investigated to ensure redundancy and diversity of the produced values for the integrated water vapor. Full article

Sandy beaches are vital geomorphic units with ecological, social, and economic significance, playing a key role in coastal protection and ecosystem regulation. However, they are increasingly threatened by climate change and human activities, highlighting the need for large-scale, high-precision monitoring to support sustainable management. Existing remote-sensing-based sandy beach extraction methods face challenges such as suboptimal feature selection and reliance on single data sources, limiting their generalization and accuracy. This study proposes a novel sandy beach extraction framework that integrates multi-source data, feature optimization, and collaborative modeling, with Fujian Province, China, as the study area. The framework combines Sentinel-1/2 imagery, nighttime light data, and terrain data to construct a comprehensive feature set containing 44 spectrum, index, polarization, texture, and terrain variables. The optimal feature subsets are selected using the Recursive Feature Elimination (RFE) algorithm. Six machine learning models—Random Forest (RF), Extreme Gradient Boosting (XGBoost), Light Gradient Boosting Machine (LGBM), Gradient Boosting Machine (GBM), Adaptive Boosting (AdaBoost), and Categorical Boosting (CatBoost)—along with an ensemble learning model, are employed for comparative analysis and performance optimization. The results indicate the following. (1) All models achieved the best performance when integrating all five types of features, with the average overall F1-score and accuracy reaching 0.9714 and 0.9733, respectively. (2) The number of optimal features selected by RFE varied by model, ranging from 19 to 36. The ten most important features across models were Band 2 (B2), Elevation, Band 3 (B3), VVVH_SUM, Spatial Average (SAVG), VH, Enhanced Water Index (EWI), Slope, Variance (VAR), and Normalized Difference Vegetation Index (NDVI). (3) The ensemble learning model outperformed all others, achieving an average overall accuracy, precision, recall, and F1-score of 0.9750, 0.9733, 0.9725, and 0.9734, respectively, under the optimal feature subset. A total of 555 sandy beaches were extracted in Fujian Province, covering an area of 43.60 km² with a total perimeter of 1263.59 km. This framework demonstrates strong adaptability and robustness in complex coastal environments, providing a scalable solution for intelligent sandy beach monitoring and refined resource management. Full article

This study pioneers the integration of Sentinel-2 satellite imagery with Kolmogorov–Arnold networks (KAN) for the evaluation of chlorophyll-a (Chl-a) concentrations in inland lakes. Using Baiyangdian Lake in Hebei Province, China, as a case study, a specialized KAN architecture was designed to extract spectral features from Sentinel-2 data, and a robust algorithm was developed for Chl-a estimation. The results demonstrate that the KAN model outperformed traditional feature-engineering-based machine learning (ML) methods and standard multilayer perceptron (MLP) deep learning approaches, achieving an R² of 0.8451, with MAE and RMSE as low as 1.1920 μg/L and 1.6705 μg/L, respectively. Furthermore, attribution analysis was conducted to quantify the importance of individual features, highlighting the pivotal role of bands B3 and B5 in Chl-a retrieval. Furthermore, spatio-temporal distributions of Chl-a concentrations in Baiyangdian Lake from 2020 to 2024 were generated leveraging the KAN model, further elucidating the underlying causes of water quality changes and examining the driving factors. Compared to previous studies, the proposed approach leverages the high spatial resolution of Sentinel-2 imagery and the accuracy and interpretability of the KAN model, offering a novel framework for monitoring water quality parameters in inland lakes. These findings may guide similar research endeavors and provide valuable decision-making support for environmental agencies. Full article

Aquatic vegetation plays a crucial role in freshwater ecosystems by providing habitats, regulating water quality, and supporting biodiversity. This study aims to monitor and analyze the dynamics of aquatic vegetation in Chimaditida Shallow Lake, Greece, using Sentinel-2 satellite imagery, with validation from field measurements. Data processing was performed using Google Earth Engine and QGIS. The study focuses on discriminating and mapping two classes of aquatic surface conditions: areas covered with Floating and Emergent Aquatic Vegetation and open water, covering all seasons from 1 March 2024, to 28 February 2025. Spectral bands such as B04 (red), B08 (near infrared), B03 (green), and B11 (shortwave infrared) were used, along with indices like the Modified Normalized Difference Water Index and Normalized Difference Vegetation Index. The classification was enhanced using Otsu’s thresholding technique to distinguish accurately between Floating and Emergent Aquatic Vegetation and open water. Seasonal fluctuations were observed, with significant peaks in vegetation growth during the summer and autumn months, including a peak coverage of 2.08 km² on 9 September 2024 and a low of 0.00068 km² on 28 December 2024. These variations correspond to the seasonal growth patterns of Floating and Emergent Aquatic Vegetation, driven by temperature and nutrient availability. The study achieved a high overall classification accuracy of 89.31%, with producer accuracy for Floating and Emergent Aquatic Vegetation at 97.42% and user accuracy at 95.38%. Validation with Unmanned Aerial Vehicle-based aerial surveys showed a strong correlation (R² = 0.88) between satellite-derived and field data, underscoring the reliability of Sentinel-2 for aquatic vegetation monitoring. Findings highlight the potential of satellite-based remote sensing to monitor vegetation health and dynamics, offering valuable insights for the management and conservation of freshwater ecosystems. The results are particularly useful for governmental authorities and natural park administrations, enabling near-real-time monitoring to mitigate the impacts of overgrowth on water quality, biodiversity, and ecosystem services. This methodology provides a cost-effective alternative for long-term environmental monitoring, especially in regions where traditional methods are impractical or costly. Full article

Ultrahigh resolution fine particulate matter (PM_2.5) mass concentration remote sensing products are crucial for atmospheric environmental monitoring, pollution source verification, health exposure risk assessment, and other fine-scale applications in urban environments. This study developed an ultrahigh resolution retrieval algorithm to estimate 30 m resolution PM_2.5 mass concentrations over urban areas from Landsat-8 and Sentinel-2A/B satellite measurements. The algorithm utilized aerosol optical depth (AOD) products retrieved from the Landsat-8 OLI and Sentinel-2 MSI measurements from 2017 to 2020, combined with multi-source auxiliary data to establish a PM_2.5-AOD relationship model across China. The results showed an overall high coefficient of determination (R²) of 0.82 and 0.76 for the model training accuracy based on samples and stations, respectively. The model prediction accuracy in Beijing and Wuhan reached R² values of 0.86 and 0.85. Applications in both cities demonstrated that ultrahigh resolution PM_2.5 has significant advantages in resolving fine-scale spatial patterns of urban air pollution and pinpointing pollution hotspots. Furthermore, an analysis of point source pollution at a typical heavy pollution emission enterprise confirmed that ultrahigh spatial resolution PM_2.5 can accurately identify the diffusion trend of point source pollution, providing fundamental data support for refined monitoring of urban air pollution and air pollution prevention and control. Full article