Search Results (42)

This paper provides a comprehensive overview of the progress in fiber-optic gyroscope technology, covering 260 key studies of the last ten years. A critical comparative analysis of fiber-optic gyroscope with alternative inertial sensors (Micro-Electro-Mechanical Systems, Hemispherical Resonator Gyroscope, Ring Laser Gyroscope) has been carried out. Confirming the unique advantages of fiber-optic gyroscope for autonomous navigation. Fundamental limitations of accuracy are considered in detail: temperature drifts, polarization noise, and Rayleigh backscattering. Modern hardware methods for suppressing these errors, including the use of photonic crystal and hollow fibers (Air-Core/Hollow-Core), are also considered in this work. The central place in the review is occupied by the analysis of the technological paradigm shift from bulky discrete circuits to hybrid integrated photonics (Indium Phosphide, Silicon Nitride, Lithium Niobate) and hybrid architectures to reduce weight and size characteristics. The role of artificial intelligence (Deep Learning, Long Short-Term Memory) methods in nonlinear drift compensation and calibration is discussed. The usage of the Brillouin effect and optomechanics promising areas are outlined, necessary to create a new generation of navigation systems operating in the absence of Global Navigation Satellite Systems signals. Full article

This work demonstrates the potential of fiber optic sensors for measuring thermal effects in lithium-ion batteries, using a fiber optic measurement method of Optical Frequency Domain Reflectometry (OFDR). The innovative application of fiber sensors allows for spatially resolved temperature measurement, particularly emphasizing the importance of monitoring not just the exterior but also the internal conditions within battery cells. Utilizing inert glass fibers as sensors, which exhibit minimal sensitivity to electric fields, opens up new pathways for their implementation in a wide range of applications, such as battery monitoring. The sensors used in this work provide real-time information along the entire length of the fiber. It is shown that using the herein presented novel sensors in a temperature range of 0–$80°\mathrm{C}$ reveals a linear, high-sensitivity thermal measurement characteristic with a local resolution of a few centimeters. Furthermore, this study presents preliminary findings on the potential application of fiber optic sensors in lithium-ion battery (LIB) cells, demonstrating that the steps required for battery integration do not impose any restrictive effects on thermal measurements. Full article

Distributed Acoustic Sensing (DAS) transforms conventional optical fibres into large-scale acoustic sensor arrays. While existing telecommunication cables are increasingly considered for DAS-based monitoring, their performance depends strongly on cable construction and strain transfer efficiency. In this study, the relative DAS signal amplitudes of three commercial telecommunication optical cables were experimentally compared using a benchtop Rayleigh backscattering-based interrogator under controlled laboratory conditions. By maintaining a constant temperature and ensuring no additional strain changes from the outside environment, we guaranteed that only strain-induced variations from acoustic excitations were measured. The results show clear differences in signal amplitude and signal-to-noise ratio (SNR) among the tested cables. The Microcable consistently produced the highest spatial peak amplitude (up to 0.029 a.u.) and SNR (up to 79), while the Duct cable reached 0.00268 a.u. with mean SNR ≈ 32. The Anti-Rodent cable showed low signal amplitude (0.0018 a.u.) but exhibited a high mean SNR (≈111) driven by an exceptional low noise floor in one of the runs. These findings reflect the variations in mechanical coupling between the fibre core and external perturbations and provide practical insights into the suitability of different telecom cable types for DAS applications, supporting informed choices for future deployments. Full article

Operation time and variability in structural, thermal, and environmental loads are important factors affecting the operational safety of power plant structures. Although conventional testing techniques are usually used to assess the level of damage introduced to a structure due to prolonged service, most of them are destructive and time- and cost-intensive. Therefore, in this paper, a novel approach consisting of Rayleigh optic strain sensors for deformation monitoring under creep conditions is proposed. The suitability of this methodology was assessed during quasi-static loading tests at room temperature, as well as during a long-term creep test at 540 °C under constant stress of 130 MPa, which was performed on a specimen made of 13HMF power engineering steel. The sensor attached to the specimen’s surface was used to monitor strain evolution during 678 days of high-temperature exposure under creep conditions. It was confirmed that the methodology proposed could be successfully used to monitor strain changes under quasi-static and creep conditions, as an excellent agreement between the fiber optic strain sensors and conventional strain recorders was achieved. Full article

With accelerating urbanization and the exponential growth in vehicle populations, high-precision traffic monitoring has become indispensable for intelligent transportation systems (ITSs). Conventional sensing technologies—including inductive loops, cameras, and radar—suffer from inherent limitations: restrictive spatial coverage, prohibitive installation costs, and vulnerability to adverse weather. Distributed Acoustic Sensing (DAS), leveraging Rayleigh backscattering to convert standard optical fibers into kilometer-scale, real-time vibration sensor networks, presents a transformative alternative. This paper provides a comprehensive review of the principles and system architecture of DAS for roadway traffic monitoring, with a focus on signal processing techniques, feature extraction methods, and recent advances in vehicle detection, classification, and speed/flow estimation. Special attention is given to the integration of deep learning approaches, which enhance noise suppression and feature recognition under complex, multi-lane traffic conditions. Real-world deployment cases on highways, urban roads, and bridges are analyzed to demonstrate DAS’s practical value. Finally, this paper delineates emerging research trends and technical hurdles, providing actionable insights for the scalable implementation of DAS-enhanced ITS infrastructures. Full article

In optical frequency domain reflectometry (OFDR), the random optical noise in Rayleigh backscattering and the sliding window length in the algorithm cause a trade-off between sensing spatial resolution and accuracy. This paper proposes a novel high-spatial-resolution high-accuracy OFDR distributed sensor based on a seamless femtosecond weak fiber Bragg grating (WFBG) array. Using femtosecond laser point-by-point (PbP) inscription technology, a 5 cm long seamless weak grating array was successfully fabricated on a polyimide fiber, consisting of ten 5 mm long WFBGs. The experimental results demonstrate that a sensing spatial resolution of 533 μm and a wavelength demodulation accuracy of ±2.05 pm were achieved for the first time. Full article

The application of distributed fiber optic strain and temperature measurement can be utilized to address a multitude of measurement tasks across a diverse range of fields, particularly in the context of structural health monitoring in the domains of building construction, civil engineering, and special foundation engineering. However, a comprehensive understanding of the influences on the measurement method and the sensors is essential to prevent misinterpretations or measurement deviations. In this context, this study investigated the effects of moisture exposure, including various salt solutions and a high pH value, on a distributed strain measurement using Rayleigh backscattering. Three fiber optic sensors with different coating materials and one uncoated fiber were exposed to five different solutions for 24 h. The study revealed significant discrepancies (∼38%) in deformation between the three coating types depending on the surrounding solution. Furthermore, in contrast to the prevailing literature, which predominantly describes swelling effects, a negative deformation (∼−47 $\mathsf{\mu }\mathsf{\epsilon }$) was observed in a magnesium chloride solution. The findings of this study indicate that corresponding effects can impact the precision of measurement, potentially leading to misinterpretations. Conversely, these effects could be used to conduct large-scale monitoring of chemical components using distributed fiber optic sensing. Full article

The properties of the state of polarization (SOP) and the degree of polarization (DOP) of Rayleigh backscattered light (RBL) in single-mode fibers (SMF) are investigated theoretically and experimentally when the incident probe is a perfectly coherent continuous-wave (CW) light. It is concluded that the instantaneous DOP of the coherently superposed RBL is always 100%, and the instantaneous SOP is determined by the distributions of the birefringence and the optical phase along the SMF. Therefore, the instantaneous SOP of the coherently superposed RBL does not have a constant relationship with the SOP of the incident CW probe. Furthermore, the instantaneous SOP varies randomly with time because the optical phase is very sensitive to ambient temperature and vibration even in the lab environment. Further theoretical derivation and experimental verification demonstrate, for the first time, that the temporally averaged SOP of the coherently superposed RBL has a simple constant relationship with the SOP of the incident CW probe, and the temporally averaged DOP is 1/3 in an SMF with low and randomly distributed birefringence. The derived formulas and obtained findings can be used to enhance the modelling and improve the performances of phase-sensitive optical time-domain reflectometry and other Rayleigh backscattering based fiber-optic sensors. Full article

This paper addresses the challenge of strain measurement using distributed fiber-optic sensors based on Rayleigh scattering in the presence of fiber Bragg gratings (FBGs) with a reflectivity level of 70% within the optical fiber. The reflectivity of such FBGs complicates distributed strain measurements that rely on the cross-correlation algorithm. The cases where the scanning ranges of a backscatter reflectometer include the resonant wavelengths of the FBGs and those beyond their limits, resulting in either a complete absence of a useful signal or the emergence of insensitive zones near the FBGs, are considered. An approach is proposed that employs a windowed Fourier transform with Hann window function for signal processing. This method effectively eliminates insensitive zones in distributed strain measurements based on Rayleigh scattering. Full article

Determination of the poloidal magnetic field distribution in tokamaks is of prime importance for the successful operation of tokamaks. In this paper, we propose a polarization-sensitive reflectometry-based optical fiber sensor for measuring the spatial distribution of the poloidal magnetic field in tokamaks. The measurement method exploits the Rayleigh backscattering and Faraday magneto-optic effect in optical fibers. The former is an intrinsic property of optical fibers and enables distributed polarization measurements, while the latter arises in the presence of a magnetic field parallel to the optical fiber axis and rotates the polarization state of the light. When an optical fiber is looped around a toroidal section of the vacuum vessel, the local polarization rotation of the light is proportional to the local poloidal magnetic field in the tokamak. The proposed method is discussed theoretically and experimentally using the results from JET. The obtained magnetic field measurement shows a good agreement with that of the internal discrete coils. A potential solution to recover the magnetic field data from the noise-affected region of the optical measurement is proposed and is demonstrated through simulations using the JET magnetic field configuration. Full article

In the paper, the effect of spontaneous Brillouin scattering (SpBS) is analyzed as a noise source in distributed acoustic sensors (DAS). The intensity of the SpBS wave fluctuates over time, and these fluctuations increase the noise power in DAS. Based on experimental data, the probability density function (PDF) of the spectrally selected SpBS Stokes wave intensity is negative exponential, which corresponds to the known theoretical conception. Based on this statement, an estimation of the average noise power induced by the SpBS wave is given. This noise power equals the square of the average power of the SpBS Stokes wave, which in turn is approximately 18 dB lower than the Rayleigh backscattering power. The noise composition in DAS is determined for two configurations, the first for the initial backscattering spectrum and the second for the spectrum in which the SpBS Stokes and anti-Stokes waves are rejected. It is established that in the analyzed particular case, the SpBS noise power is dominant and exceeds the powers of the thermal, shot, and phase noises in DAS. Accordingly, by rejecting the SpBS waves at the photodetector input, it is possible to reduce the noise power in DAS. In our case, this rejection is carried out by an asymmetric Mach-Zehnder interferometer (MZI). The rejection of the SpBS wave is most relevant for broadband photodetectors, which are associated with the use of short probing pulses to achieve short gauge lengths in DAS. Full article

The primary objective of this study was to evaluate the capability of a distributed fiber optic sensor to capture in situ dynamic transient strain formation during and post-weldment on the surface of a steel plate. The study involved a vertical manual weld of a bead on a plate on a 300 mm × 300 mm × 6.35 mm A36 steel plate (European equivalent S235J2; Chinese equivalent Q235B) clamped at the corners. A fiber optic distributed sensor was used to measure the surface total and thermal strains on the welded side of the plate adjacent to the weld path. Experimental results show a complex behavior of strain changes during the welding process and the residual strain formation post-welding. This study aims to document the use of distributed fiber optic sensing techniques in welding applications. Validations of the experimental data were performed using VrWeld, a commercial software framework for computational weld mechanics, and an iPhone FLIR One Pro. thermographic camera. The experimental results demonstrated that although distributed fiber optic sensing based on Rayleigh backscattering is an appropriate and useful technique for total strain measurements, the manufacturing and the materials used for the thermal sensors are critical in obtaining optimal results. Finally, this study highlights the challenges encountered in synchronizing large experimental data sets captured with different instruments with computational welding mechanic (CWM) models. Full article

This paper presents a real-time remote water level monitoring system based on dense wavelength division multiplexing (DWDM)-passive optical fiber sensor (OFS) network for the application of the Internet of Things (IoT). This network employs a broadband light source based on amplified spontaneous emission (ASE) as a seed light. This ASE light is spectrum-sliced by an athermal type arrayed waveguide grating (200 GHz × 16 channel), then distributed towards multiple sensing units (SU). Here, 16 SUs are installed vertically at the specified height in the water pool according to the design specification (i.e., spatial resolution). Then, each SU reflects an optical spectrum having a different reflection coefficient depending on the surrounding medium (e.g., air or water). By measuring these reflected optical spectra with an optical spectrum analyzer, the water level can be easily recognized in real time. However, as the sensing distance increases, system performance is severely degraded due to the Rayleigh Back-Scattering of the ASE light. As a result, the remote sensing capability is limited at a short distance (i.e., <10 km). To overcome this limitation, we propose a simple signal processing technique based on feature extraction of received optical spectra, which includes embedding a peak detection algorithm with a signal validation check. For the specific, the proposed signal processing performs the peak power detection, signal quality monitoring, and determination/display of the actual water level through three function modules, i.e., data save/load module, signal processing module, and Human–Machine Interface display module. In particular, the signal quality of the remote sensing network can be easily monitored through several factors, such as the number of spectral peaks, the wavelength spacing between neighboring peaks and the pattern of detected peak power. Moreover, by using this validation check algorithm, it is also possible to diagnose various error types (such as peak detection error, loss of data and so on) according to the pattern of measured optical spectra. As a result, the IoT sensor network can recognize 17 different level statuses for the water level measurement from a distance of about 25 km away without active devices such as optical amplifiers (i.e., passive remote sensing). Full article

Optical fiber sensors are used for partial discharge detection in many applications due their advantage of strong anti-electromagnetic interference capability. Multi-point distributed partial discharge detection and location are important for electrical equipment. In this paper, a distributed partial discharge location and detection scheme based on optical fiber Rayleigh backscattering light interference is experimentally demonstrated. At the same time, the location and extraction algorithm is used to demodulate the partial discharge signal; furthermore, the high-pass filter is used to reduce the system low-frequency noise and environment noise. It is clear that the proposed system can detect a partial discharge signal generated by metal needle sensitivity, and the detectable frequency range is 0–2.5 kHz. We carried out 10 locating tests for two sensing units, the experimental results show that the maximum location error is 1.0 m, and the maximum standard deviation is 0.3795. At same time, the signal-to-noise ratio (SNR) of sensing unit 1 and sensing unit 2 are greatly improved after demodulation, which are 39.7 and 38.8, respectively. This provides a new method for a multipoint-distributed optical fiber sensor used for detecting and locating a long-distance electrical equipment partial discharge signal. Full article

This paper presents the measurement methodology of diameter reduction monitoring of micro-tunnel structures used for radioactive waste storage based on distributed strain measurements along fiber optic sensors installed on the circumference. The whole measurement procedure is described: the calibration of the sensors for use in harsh environment (temperature and radioactivity), the measurement analysis technique, the performance assessment of different measurement systems on a surface mock-up and the in-situ validation on an underground structure. The performances of Brillouin and Rayleigh backscattering measurements are compared, as well as different fixation technologies. Distributed measurements are compared to alternative measurements: displacement sensors, Bragg grating extensometers and MEMS accelerometers. The distributed Rayleigh backscattering measurement performed on optical cables bonded to the surface of the structure appears to be the best solution for monitoring the convergence of micro-tunnels and offers comparable performance to alternative technologies tested on the surface demonstrator. Full article