Search Results (382)

Enhancing the real-world performance of sustainably designed and certified green buildings remains a significant challenge, particularly in hot climates where efforts to improve thermal comfort often conflict with energy efficiency goals. In the United Arab Emirates (UAE), even newly constructed facilities with green building certifications present opportunities for retrofitting and performance optimization. This study investigates the energy and thermal comfort performance of a LEED Gold-certified, mixed-use university campus in Dubai through a calibrated digital twin developed using IES thermal modelling software. The analysis evaluated existing sustainable design strategies alongside three retrofit energy conservation measures (ECMs): (1) improved building envelope U-values, (2) installation of additional daylight sensors, and (3) optimization of fan coil unit efficiency. Simulation results demonstrated that the three ECMs collectively achieved a total reduction of 15% in annual energy consumption. Thermal comfort was assessed using operative temperature distributions, Predicted Mean Vote (PMV), and Predicted Percentage of Dissatisfaction (PPD) metrics. While fan coil optimization yielded the highest energy savings, it led to less favorable comfort outcomes. In contrast, enhancing envelope U-values maintained indoor conditions consistently within ASHRAE-recommended comfort zones. To further support energy reduction and progress toward Net Zero targets, the study also evaluated the integration of a 228.87 kW rooftop solar photovoltaic (PV) system, which offset 8.09% of the campus’s annual energy demand. By applying data-driven thermal modelling to assess retrofit impacts on both energy performance and occupant comfort in a certified green building, this study addresses a critical gap in the literature and offers a replicable framework for advancing building performance in hot climate regions. Full article

Developing a more efficient, cleaner, and energy-saving pretreatment process is the primary goal for lignocellulosic biofuels production. This study demonstrated the feasibility of circulating high-concentration acetone–butanol–ethanol (ABE) obtained via in situ product recovery (ISPR) as a pretreatment liquor. Taking ABE solvent separated from pervaporation (PV) and gas stripping (GS) as examples, results indicated that under dilute alkaline (1% NaOH) catalysis, the highly recalcitrant lignocellulosic matrices can be efficiently depolymerized, thereby improving fermentable sugars recovery in saccharification stage and ABE yield in subsequent fermentation stage. Results also revealed delignification of 91.5% (stream from PV) and 94.3% (stream from GS), with total monosaccharides recovery rates of 56.5% and 57.1%, respectively, can be realized when using corn stover as feedstock. Coupled with ABE fermentation, mass balance indicated a maximal 106.6 g of ABE (65.8 g butanol) can be produced from 1 kg of dry corn stover by circulating the GS condensate in pretreatment (the optimized pretreatment conditions were 1% w/v alkali and 160 °C for 1 h). Additionally, technical lignin with low molecular weight and narrow distribution was isolated, which enabled further side-stream valorisation. Therefore, integrating ISPR product circulation with lignocellulosic biobutanol shows strong potential for application under the concept of biorefinery. Full article

As the global energy transition accelerates, the integration of solar power and artificial intelligence (AI) technologies offers new pathways for sustainable local development. This study examines four Serbian municipalities—Šabac, Sombor, Pirot, and Čačak—to assess how AI-enabled solar power systems can enhance energy resilience, reduce emissions, and support community-level sustainability goals. Using a mixed-method approach combining spatial analysis, predictive modeling, and stakeholder interviews, this research study evaluates the performance and institutional readiness of local governments in terms of implementing intelligent solar infrastructure. Key AI applications included solar potential mapping, demand-side management, and predictive maintenance of photovoltaic (PV) systems. Quantitative results show an improvement >60% in forecasting accuracy, a 64% reduction in system downtime, and a 9.7% increase in energy cost savings. These technical gains were accompanied by positive trends in SDG-aligned indicators, such as improved electricity access and local job creation in the green economy. Despite challenges related to data infrastructure, regulatory gaps, and limited AI literacy, this study finds that institutional coordination and leadership commitment are decisive for successful implementation. The proposed AI–Solar Integration for Local Sustainability (AISILS) framework offers a replicable model for emerging economies. Policy recommendations include investing in foundational digital infrastructure, promoting low-code AI platforms, and aligning AI–solar projects with SDG targets to attract EU and national funding. This study contributes new empirical evidence on the digital–renewable energy nexus in Southeast Europe and underscores the strategic role of AI in accelerating inclusive, data-driven energy transitions at the municipal level. Full article

With the increasing integration of renewable energy and smart technologies in residential energy systems, proactive household energy management (HEM) have become critical for reducing costs, enhancing grid stability, and achieving sustainability goals. This study proposes a ultra-short-term forecasting-driven proactive energy consumption optimization strategy that integrates advanced forecasting models with multi-objective scheduling algorithms. By leveraging deep learning techniques like Graph Attention Network (GAT) architectures, the system predicts ultra-short-term household load profiles with high accuracy, addressing the volatility of residential energy use. Then, based on the predicted data, a comprehensive consideration of electricity costs, user comfort, carbon emission pricing, and grid load balance indicators is undertaken. This study proposes an enhanced mixed-integer optimization algorithm to collaboratively optimize multiple objective functions, thereby refining appliance scheduling, energy storage utilization, and grid interaction. Case studies demonstrate that integrating photovoltaic (PV) power generation forecasting and load forecasting models into a home energy management system, and adjusting the original power usage schedule based on predicted PV output and water heater demand, can effectively reduce electricity costs and carbon emissions without compromising user engagement in optimization. This approach helps promote energy-saving and low-carbon electricity consumption habits among users. Full article

Global building energy consumption is significantly increasing. Utilizing renewable energy sources may be an effective approach to achieving low-carbon and energy-efficient buildings. A combined system incorporating solar photovoltaic–thermal (PV/T) components with an air-source heat pump (ASHP) was studied for simultaneous heating and power generation in a real residential building. The back panel of the PV/T component featured a novel polygonal Freon circulation channel design. A prototype of the combined heating and power supply system was constructed and tested in Fuzhou City, China. The results indicate that the average coefficient of performance (COP) of the system is 4.66 when the ASHP operates independently. When the PV/T component is integrated with the ASHP, the average COP increases to 5.37. On sunny days, the daily average thermal output of 32 PV/T components reaches 24 kW, while the daily average electricity generation is 64 kW·h. On cloudy days, the average daily power generation is 15.6 kW·h; however, the residual power stored in the battery from the previous day could be utilized to ensure the energy demand in the system. Compared to conventional photovoltaic (PV) systems, the overall energy utilization efficiency improves from 5.68% to 17.76%. The hot water temperature stored in the tank can reach 46.8 °C, satisfying typical household hot water requirements. In comparison to standard PV modules, the system achieves an average cooling efficiency of 45.02%. The variation rate of the system’s thermal loss coefficient is relatively low at 5.07%. The optimal water tank capacity for the system is determined to be 450 L. This system demonstrates significant potential for providing efficient combined heat and power supply for buildings, offering considerable economic and environmental benefits, thereby serving as a reference for the future development of low-carbon and energy-saving building technologies. Full article

With rising energy costs and the need for sustainable power solutions in urban South African settings, grid-tied renewable energy systems have become viable alternatives for reducing dependence on traditional grid supply. This study investigates the techno-economic feasibility of a grid-connected hybrid photovoltaic (PV) and battery storage system designed for a commercial facility located in Johannesburg, South Africa—an area characterized by a subtropical highland climate. We conducted the analysis using the HOMER Grid software and evaluated the performance of the proposed PV/battery system against the baseline grid-only configuration. Simulation results indicate that the optimal systems, comprising 337 kW of flat-plate PV and 901 kWh of lithium-ion battery storage, offers a significant reduction in electricity expenditure, lowering the annual utility cost from $39,229 to $897. The system demonstrates a simple payback period of less than two years and achieves a net present value (NPV) of approximately $449,491 over a 25-year project lifespan. In addition to delivering substantial cost savings, the proposed configuration also enhances energy resilience. Sensitivity analyses were conducted to assess the impact of variables such as inflation rate, discount rate, and load profile fluctuations on system performance and economic returns. The results affirm the suitability of hybrid grid-tied PV/battery systems for cost-effective, sustainable urban energy solutions in climates with high solar potential. Full article

This study presents an optimization approach for sizing photovoltaic (PV) and battery energy storage systems (BESSs) within a DC microgrid, aiming to enhance cost-effectiveness, energy reliability, and environmental sustainability. PV generation is modeled based on environmental parameters such as solar irradiance and ambient temperature, while battery charging and discharging operations are managed according to real-time demand. A simulation framework is developed in MATLAB 2021b to analyze PV output, battery state of charge (SOC), and grid energy exchange. For demand-side management, the Long Short-Term Memory (LSTM) deep learning model is employed to forecast future load profiles using historical consumption data. Moreover, a Multi-Layer Perceptron (MLP) neural network is designed for comparison purposes. The dynamic load prediction, provided by LSTM in particular, improves system responsiveness and efficiency compared to MLP. Simulation results indicate that optimal sizing of PV and storage units significantly reduces energy costs and dependency on the main grid for both forecasting methods; however, the LSTM-based approach consistently achieves higher annual savings, self-sufficiency, and Net Present Value (NPV) than the MLP-based approach. The proposed method supports the design of more resilient and sustainable DC microgrids through data-driven forecasting and system-level optimization, with LSTM-based forecasting offering the greatest benefits. Full article

This study evaluates and compares centralized and distributed reactive power compensation strategies using Static Var Compensators (SVCs) to enhance the performance of a high-voltage transmission system in the Caribbean region of Colombia. The methodology comprises four stages: system characterization, assessment of the uncompensated condition under peak demand, definition of four SVC-based scenarios, and steady-state analysis through power flow simulations using DIgSILENT PowerFactory. SVCs were modeled as Thyristor-Controlled Devices (“SVC Type 1”) operating as PV nodes for voltage regulation. The evaluated scenarios include centralized SVCs at the Slack node, node N4, and node N20, as well as a distributed scheme across load nodes N51 to N55. Node selection was guided by power flow analysis, identifying voltage drops below 0.9 pu and overloads above 125%. Technically, the distributed strategy outperformed the centralized alternatives, reducing active power losses by 37.5%, reactive power exchange by 46.1%, and improving node voltages from 0.71 pu to values above 0.92 pu while requiring only 437 MVAr of compensation compared to 600 MVAr in centralized cases. Economically, the distributed configuration achieved the highest annual energy savings (36 GWh), the greatest financial return (USD 5.94 M/year), and the shortest payback period (7.4 years), highlighting its cost-effectiveness. This study’s novelty lies in its system-level comparison of SVC deployment strategies under real operating constraints. The results demonstrate that distributed compensation not only improves technical performance but also provides a financially viable solution for enhancing grid reliability in infrastructure-limited transmission systems. Full article

Rooftop photovoltaic (PV) panel systems have become a key component in green building design, driven by new building sustainability measures advocated worldwide. The shading generated by the rooftop PV panel arrays can impact their annual heating and cooling load, as well as their overall thermal performance. This paper presents a long-term experimental investigation into the changes in roof temperature caused by PV panels. The experiment was conducted over the course of a year, with measurements taken on four sample days each month. The study is based on measurements of the covered roof temperature, the uncovered roof temperature, PV surface temperature, ambient air temperature, as well as solar irradiation, wind speed, and rainfall. The results reveal that the annual energy savings (MJ/m²) in the cooling load due to the covered roof are about 26% higher than the energy loss from the heating load due to shading. The study shows that the effect of the rooftop PV panels on the house’s total heating and cooling load savings is between 5.3 to 6.1%. This difference is significant in thermal performance analyses, especially if most of the roof is covered by PV panels. Full article

The growing global demand for sustainable energy solutions has spurred interest in hybrid renewable energy systems, particularly those combining photovoltaic (PV) solar and wind power. This study records the technical and financial feasibility of establishing hybrid solar photovoltaic and wind power stations in Iraq, Al-Rutbah and Al-Nasiriya, with a total power of 60 MW for each, focusing on optimizing energy output and cost-efficiency. The analysis evaluates key technical factors, such as resource availability, system design, and integration challenges, alongside financial considerations, including capital costs, operational expenses, and return on investment (ROI). Using the RETScreen program, the research explores potential locations and configurations for maximizing energy production and minimizing costs, and the evaluation is performed through the calculation Internal Rate of Return (IRR) on equity (%), the Simple Payback (year), the Net Present Value (NPV), and the Annual Life Cycle Savings (ALCSs). The results show that both PV and wind technologies demonstrate significant energy export potential, with PV plants exporting slightly more electricity than their wind counterparts. Al Nasiriya Wind had the highest output, indicating favorable wind conditions or better system performance at that site. The results show that the analysis of the proposed hybrid system has a standardizing effect on emissions, reducing variability and environmental impact regardless of location. The results demonstrate that solar PV is significantly more financially favorable in terms of capital recovery time at both sites, and that financial incentives, especially grants, are essential to improve project attractiveness, particularly for wind power. The analysis underscores the superior financial viability of solar PV projects in both regions. It highlights the critical role of financial support, particularly capital grants, in turning renewable energy investments into economically attractive opportunities. Full article

Lipases are important industrial enzymes with a wide range of applications across various sectors. Cold-active lipases are particularly well suited for industrial processes that operate at low temperatures (such as food processing and environmental remediation) due to their high catalytic efficiency and energy-saving benefits. In this study, a novel lipase—LipU (GenBank accession: PV094892)—was heterologously expressed from Bacillus cereus U2 and characterized for its low-temperature adaptability and alkaline resistance. LipU belongs to the lipase Subfamily I.5 and shares the highest amino acid sequence identity (53.32%) with known homologs. Enzymatic assays revealed that LipU exhibits optimal activity at 20 °C and pH 11. It retained 95% of its initial activity after 24 h of incubation at 4 °C and pH 11.0. Furthermore, the activity of LipU was enhanced by Ca²⁺, Na⁺, Tween 20, and Tween 80, whereas it was inhibited by Cu²⁺, Zn²⁺, Mn²⁺, and sodium dodecyl sulfate (SDS). LipU demonstrated tolerance to various organic solvents of differing polarity; after 1 h of exposure to 15% (v/v) ethanol, n-butanol, isoamyl alcohol, dimethyl sulfoxide, or glycerol, it retained over 78.6% of its activity. These properties make LipU a promising candidate for industrial applications, including for leather degreasing, alkaline wastewater treatment, and low-temperature biocatalysis. Full article

According to the International Institute of Refrigeration (IIR), 20% of worldwide electricity consumption is for refrigeration, with domestic refrigeration appliances comprising a fifth of this demand. As the uptake of renewable energy sources for on-grid and isolated electricity supply increases, the need for mechanisms to match demand and supply better and increase power system flexibility has led to enhanced attention on demand-side management (DSM) practices to boost technology, infrastructure, and market efficiencies. Refrigeration requirements will continue to rise with development and climate change. In this work, particle swarm optimization (PSO) is used to evaluate energy saving and load factor improvement possibilities for refrigeration devices at a site in Kenya, using a combination of DSM load shifting and strategic conservation, and based on appliance temperature evolution measurements. Refrigeration energy savings of up to 18% are obtained, and the load factor is reduced. Modeling is done for a hybrid system with grid, solar PV, and battery, showing a marginal increase in solar energy supply to the load relative to the no DSM case, while the grid portion of the load supply reduces by almost 25% for DSM relative to No DSM. Full article

This paper presents SEAMS (Solar Energy Aggregator Management System), an optimization-based framework for managing solar energy trading in smart communities under Thailand’s regulatory constraints. A major challenge is the prohibition of residential grid feed-in, which limits the use of conventional peer-to-peer energy models. Additionally, fixed pricing is required to ensure simplicity and trust among users. SEAMS coordinates prosumer and consumer households, a shared battery energy storage system (BESS), and a centralized aggregator (AGG) to minimize total electricity costs while maintaining financial neutrality for the aggregator. A mixed-integer linear programming (MILP) model is developed to jointly optimize PV sizing, BESS capacity, and internal buying price, accounting for Time-of-Use (TOU) tariffs and local policy limitations. Simulation results show that a 6 kW PV system and a 70–75 kWh shared BESS offer optimal performance. A 60:40 prosumer-to-consumer ratio yields the lowest total cost, with up to 49 percent savings compared to grid-only systems. SEAMS demonstrates a scalable and policy-aligned approach to support Thailand’s transition toward decentralized solar energy adoption and improved energy affordability. Full article

In response to rising energy consumption in buildings, this study proposes a solar-tracking movable louver integrated with a photovoltaic (PV) module and evaluates its performance to verify its energy-saving potential. First, the louver system can be configured as either vertical or horizontal by modularizing and rotating its slats. A solar-tracking mechanism for single-axis louver control was also developed and proven effective. Second, for optimal energy-saving performance, the louver operation must respond to external environmental conditions. Its control should account for PV power generation and building energy demands for heating, cooling, and lighting to maintain comfortable indoor and outdoor environments. Third, the proposed louver system achieved a building energy reduction of 4.7–8.8% compared to conventional fixed technologies. However, in winter, the louver may obstruct solar gains, potentially diminishing its effectiveness in reducing energy consumption. While this study demonstrates the potential of the proposed louver technology for energy efficiency, it is limited by the scope of environmental and operational conditions considered in the performance evaluation. Further studies under diverse climatic scenarios are necessary to substantiate its broader applicability. Full article

Efficient scheduling of Energy Storage Systems (ESS) within microgrids has emerged as a critical issue to ensure energy cost reduction, peak shaving, and battery health management. For ESS scheduling, both single-agent and multi-agent deep reinforcement learning (DRL) approaches have been explored. However, the former has suffered from scalability to include multiple objectives while the latter lacks comprehensive consideration of diverse user objectives. To defeat the above issues, in this paper, we propose a new DRL-based scheduling algorithm using a multi-agent proximal policy optimization (MAPPO) framework that is combined with Pareto optimization. The proposed model employs two independent agents: one is to minimize electricity costs and the other does charge/discharge switching frequency to account for battery degradation. The candidate actions generated by the agents are evaluated through Pareto dominance, and the final action is selected via scalarization-reflecting operator-defined preferences. The simulation experiments were conducted using real industrial building load and photovoltaic (PV) generation data under realistic South Korean electricity tariff structures. The comparative evaluations against baseline DRL algorithms (TD3, SAC, PPO) demonstrate that the proposed MAPPO method significantly reduces electricity costs while minimizing battery-switching events. Furthermore, the results highlight that the proposed method achieves a balanced improvement in both economic efficiency and battery longevity, making it highly applicable to real-world dynamic microgrid environments. Specifically, the proposed MAPPO-based scheduling achieved a total electricity cost reduction of 14.68% compared to the No-ESS case and achieved 3.56% greater cost savings than other baseline reinforcement learning algorithms. Full article