Search Results (93)

Glaciers are significant sources of fresh water on planet Earth. The Hindukush–Karakoram–Himalayan (HKH) glaciers provide the water supply to more than half of the human population of the globe, for agricultural activities, biodiversity survival, and ecosystem services. In recent years, the loss of glacial ice has been forecasted to cause problems such as sea level rise, changes in water availability, and release of contaminants that reside in the surfaces of glaciers or within them. In this regard, mineralogical sediments play a significant role in the geochemistry of glaciers and element cycling. This study analyzed elemental pollutants found in the glaciers of Pakistan and investigated the diverse bacterial communities residing therein. Samples of ice and sediments were collected from the Gilgit, Hunza, and Swat glaciers in northern Pakistan. Nine elements, including co-factors, heavy metals, and nutrients, were assessed using atomic absorption spectrophotometry. The research findings indicate higher concentrations of the elements K, Fe, Cu, and Cr in Hunza glacier ice (Hgi) and Ni, Zn, As, and Cd in Gilgit glacier ice (Ggi). In terms of glacier sediments, Swat (Sgs), Gilgit (Ggs), and Hunza (Hgs) samples showed the highest concentrations of K, Cu, Ni, Zn, As, Pb, Cd, and, respectively, of Fe, and Cr. The amount of Cu and Cr is the same in Swat glacier ice and Swat glacier foot. However, the concentration of some elements (As, K, Pb, Zn) is higher in Swat glacier ice, while the amount of some elements (Cd, Ni) is greater in Swat glacier foot. Furthermore, microbial cultivation techniques revealed diverse bacterial communities inhabiting the sampled glaciers. Phylogenetic analysis of the bacterial isolates, based on 16S rRNA gene sequences, showed high homology (99–100%) with previously reported species. The resultant phylogenetic tree grouped the bacterial isolates, such as Serratia marcescens, Cupriavidus sp., and Bacillus cereus, with closely related species known for their roles in nutrient cycling, environmental resilience, and metal tolerance. These findings highlight the ecological significance and adaptive potential of microbial communities in glacier environments, emphasizing their role in elemental cycling and environmental resilience. Full article

In this study, kaolinite-based clay (Ka-Clay) was used as an adsorbent for the efficient removal of Pb(II), Cd(II) and Hg(II) ions from aqueous media. The selection of Pb(II), Cd(II) and Hg(II) ions for experimental studies took into account their high toxicity, while the choice of Ka-Clay, the ease of preparation and high availability of this material were the most important arguments. Ka-Clay exhibits high adsorption performance, with removal percents over 98% for Pb(II) and 93% for Cd(II), even at high concentrations of metal ions (over 150 mg/L, pH = 6.5, 4 g adsorbent/L, 21 ± 1 °C). For Hg(II) ions, the adsorption percent does not exceed 55%, and this moderate value is mainly due to the significant change in pH. The adsorption behavior was in accordance with the Langmuir model (R² > 0.95) and the pseudo-second order kinetic model (R² > 0.99), indicating an adsorption process that occurs mainly through chemical interactions at the adsorbent surface between the metal ions and the functional groups. Adsorption processes are spontaneous (ΔG = −8.66 ÷ −15.76 kJ/mol) and endothermic (ΔH = 7.09 ÷ 21.81 kJ/mol), and the adsorption mechanism is the results of elementary processes of electrostatic attraction, ion exchange and superficial complexation. The insignificant effect of other ions (Ca(II), Mg(II), Na(I), K(I)) present in real wastewater samples as well as the desorption behavior of exhausted adsorbent highlight the practical utility of this adsorbent on a large scale. The experimental results included in this study suggest that Ka-Clay can be used as a promising adsorbent for the removal of high concentrations of toxic heavy metals with low cost and high efficiency, and this can contribute to the design of a sustainable wastewater treatment method. Full article

This study was realized in the frame of an IAEA Coordinated Research Project for the evaluation of sediment dynamics, applying in-situ radiometric methods accompanied with a theoretical model. The in-situ methods were validated using lab-based high-resolution gamma-ray spectrometry. Sediment dynamics assessments were performed based on the measured and mapped activity concentrations of specific ²³⁸U progenies (²¹⁴Bi or ²¹⁴Pb), ²³²Th progenies (²⁰⁸Tl and ²²⁸Ac), and ⁴⁰K along the shoreline of the beach. The maps of the activity concentrations of natural radionuclides were produced rapidly using software tools (R language v4.5). The sediment dynamics of the studied area were also investigated through numerical simulations, applying an open source model considering land–sea interactions and meteorological conditions and the corresponding sediment processes. The assessments, which were conducted utilizing the detailed data from the natural radioactivity maps, were validated by the simulation results, since both were found to be in agreement. Generally, it was confirmed that the distribution of radionuclides reflects the selective transport processes of sediments, which are related to the corresponding processes that occur in the study area. Legrena Beach in Attica, Greece, served as a pilot area for the comparative analysis of methods and demonstration of their relevance and applicability for studying coastal processes. Full article

The study examines the biosorption potential of Ulva intestinalis (UI) and calcium oxide-modified Ulva intestinalis (CaO-UI) for the environmentally favorable removal of cadmium (Cd²⁺), nickel (Ni²⁺), and lead (Pb²⁺) from aqueous solutions. This research addresses the critical need for sustainable water treatment solutions by developing a green-synthesized biosorbent that combines renewable biomass with enhanced adsorption properties. The adsorption properties of the biomass were improved by preparing calcium oxide (CaO) using Ulva intestinalis extract by green synthesis. Langmuir, Freundlich, and Temkin isotherms were employed to model the results of adsorption experiments that were conducted under a variety of conditions, such as contact time, biosorbent dose, and initial metal ion concentration. Langmuir (R² = 0.999) and Freundlich (R² = 0.999) models both provided an exceptionally well-fitted model for the adsorption isotherms, suggesting a hybrid mechanism that integrates monolayer chemisorption at CaO-active sites and multilayer adsorption on the heterogeneous algal matrix. Key findings demonstrate that the maximum adsorption capacity (qm) of CaO-UI was substantially higher than that of UI, with values of 571.21 mg/g for Cd²⁺, 665.51 mg/g for Ni²⁺, and 577.87 mg/g for Pb²⁺, respectively, in comparison to 432.47 mg/g, 335.75 mg/g, and 446.65 mg/g for UI. The adsorption process was dominated by pseudo-second-order (PSO) chemisorption, as evidenced by kinetic studies (R² = 0.949–0.993). CaO-UI exhibited substantially higher rate constants (k₂ = 9.00–10.15 mg/mg·min) than raw UI (k₂ = 4.72–5.71 mg/mg·min). The green synthesis of calcium oxide has resulted in an increase in surface area, porosity, and functional group density, which is responsible for the enhanced performance of CaO-UI. The adsorption efficacy of Pb²⁺ was the highest, followed by Cd²⁺ and Ni²⁺, which was indicative of the differences in metal ion affinity and hydration energy. These results underscore the potential of CaO-UI as a biosorbent that is both cost-effective and sustainable for the removal of heavy metals in wastewater treatment applications. Full article

In ultra-relativistic heavy-ion collisions, the study of muons from kaon (K) and pion ($\pi$) decays provides insights into hadron production and propagation in the Quark–Gluon Plasma (QGP). This paper investigates muon yields from K and $\pi$ decays in Pb–Pb collisions at $\sqrt{s_{\mathrm{NN}}}=2.76$ TeV using a fast simulation method. We employ a fast Monte Carlo procedure to estimate muon yields from charged kaons and pions. The simulation involves generating pions and kaons with uniform $p_{\mathrm{T}}$ and y distributions, simulating their decay kinematics via PYTHIA, and reweighting to match the physical spectra. Our results show the transverse momentum distributions of muons from K and $\pi$ decays at forward rapidity ($2.5<y<4.0$) for different centrality classes. The systematic uncertainties are primarily from the mid-rapidity charged K/$\pi$ spectra and rapidity-dependent $R_{\mathrm{AA}}$ uncertainties. The muon yields from pion and kaon decays exhibit consistency across centrality classes in the $p_{\mathrm{T}}$ range of 3–10 GeV/c. This study contributes to understanding hadronic interactions and decay kinematics in heavy-ion collisions, offering references for investigating pion and kaon decay channels and hot medium effects. Full article

To achieve the resource utilization of iron ore tailings (IOTs), two different IOTs were investigated as sustainable adsorbents for ciprofloxacin (CIP) removal from aqueous systems. Through systematic batch experiments, key adsorption parameters including initial pH, adsorbent dosage, contact time, ionic strength, and temperature were comprehensively evaluated. The results showed that CIP adsorption by IOTs remained relatively stable across a broad initial pH range (2–10), with maximum adsorption capacities of 5-IOT and 14-IOT observed at the initial pH values of 10.1 and 9.16, respectively. Competitive ion experiments revealed a gradual decrease in CIP adsorption capacity with increasing ionic strength (Na⁺, Mg²⁺, and Ca²⁺). Thermodynamic analyses indicated an inverse relationship between adsorption capacity and temperature, yielding maximum adsorption capacities (Q_max) of 16.64 mg/g (5-IOT) and 13.68 mg/g (14-IOT) at 288.15 K. Mechanistic investigations combining material characterization and adsorption modeling identified ion exchange as the predominant interaction mechanism. Notably, trace elements (Cd, Co, Cr, Cu, Fe, Ni, Pb, and Zn) were released during leaching tests, with concentrations consistently below environmental safety thresholds. A back-propagation artificial neural network (BP-ANN) with optimized architecture (8-11-1 topology) demonstrated high predictive accuracy (MSE = 0.0031, R² = 0.9907) for adsorption behavior. These findings suggested IOTs as cost-effective, environmentally compatible adsorbents for CIP remediation, offering the dual advantages of pharmaceutical pollutant removal and industrial waste valorization. Full article

Four quaternary Zintl phase thermoelectric (TE) materials belonging to the Ba_1-xEu_xZn₂Sb₂ (x = 0.02(1), 0.04(1), 0.08(1), 0.15(1)) system were successfully synthesized using the molten Pb-flux or the conventional high-temperature reaction methods. Their crystal structures were characterized by both powder and single-crystal X-ray diffraction analyses, and all four isotypic title compounds adopted the orthorhombic BaCu₂S₂-type (Pnma, Z = 4, Pearson code oP20) structure. The radius ratio criterion, based on the cationic and anionic elements (i.e., r₊/r₋), was successfully verified in the title system, as in our previous reports, where r₊/r₋ > 1 for the BaCu₂S₂-type structure. A series of density functional theory calculations were performed using a hypothetical model with the idealized compositions of Ba_0.75Eu_0.25Zn₂Sb₂, and the results were compared with the ternary parental compound BaZn₂Sb₂ to understand the influence of Eu substituents in the Ba_1-xEu_xZn₂Sb₂ system. A similar overall shape of the density of states (DOS) curves and the near-constant DOS values at E_F before and after the cationic substitution suggest only marginal changes in the carrier concentration. Therefore, carrier mobility has a dominant role in rationalizing the observed variations in the electrical transport properties of the title system. Temperature-dependent TE property measurements proved that an increase in the Seebeck coefficient S and a decrease in electrical conductivity σ were observed as the Eu substituents gradually increased in the Ba_1-xEu_xZn₂Sb₂ system, although the overall S and σ values were lower than those in the parental compound BaZn₂Sb₂. The thermal conductivities of these title compounds were successfully lowered by phonon scattering, but due to the overall smaller electrical transport properties, the observed maximum ZT was 0.49 at 773 K for Ba_0.98(1)Eu_0.02Zn₂Sb₂. Full article

Due to the frequent occurrence of forest fires worldwide, which cause severe economic losses and casualties, it is essential to explore the mechanisms of forest fires. In this study, seven common broadleaf plant species from southern China were selected to observe their microscopic structural parameters. The combustion performance parameters of the leaves of these seven species were measured using a cone calorimeter, and the relationship between the microscopic structure and combustion performance was analyzed. Additionally, factor analysis was used to study the combustion intensity factor (F1), fire resistance intensity factor (F2), and the comprehensive fire risk degree (F) of the leaves of the seven plant species. Finally, regression analysis was performed between the microscopic structural parameters and the comprehensive fire risk factor. The results show the following: (1) The ratio of spongy mesophyll to palisade cells (S/P) affects the combustion performance of plant leaves. (2) The ranking of the comprehensive fire risk factor for the leaves of the seven plant species is as follows: Osmanthus fragrans var. semperflorens (OFS) > Cinnamomum camphora (CC) > Loropetalum chinense (R. Br.) Oliv. (LC) > Pterocarya stenoptera C. DC. (PS) > Loropetalum chinense var. rubrum (LCVR) > Photinia beauverdiana C. K Schneid. (PB) > Styphnolobium japonicum (L.) Schott (SJ). (3) There is a strong exponential relationship between the comprehensive fire risk factor and the microscopic structural parameters. This study is beneficial for selecting fire-resistant tree species and monitoring species with higher comprehensive fire risk. Full article

Dust containing lead and zinc is a harmful contaminant, which causes serious harm to the natural environment and human health. At present, it is believed that the microscopic morphology of lead-zinc dust is intimately related to its biological toxicity. Chemical composition serves as a pivotal factor influencing the structural characteristics of dust. However, research on the impact of chemical composition variations on the microscopic morphology of dust containing lead and zinc remains inadequate. The particle size analysis reveals that as PbO content increases and ZnO content decreases, the particle size of the dust diminishes, but some samples exhibit a larger agglomeration structure. Combined with the results of the box number method, it is evident that at lower magnifications, an increase in PbO content leads to a decrease in image complexity and a loosening of aggregated structures. The similarity in pile shapes amplifies this trend, resulting in a decline in the box-counting dimension (D value) within the PbO/ZnO ratio range of 26.45 to 138, accompanied by an inverse change in the corresponding goodness of fit R-sq value. At the observation multiple of 30,000 times (30 K), smaller particles within the sample become visible, and the presence of relatively larger particles and complex sizes enhances the fractal characteristics of the sample, leading to a higher D value. Within the PbO/ZnO ratio range of 90/10 to 99/1, a coupling relationship exists between the chemical composition of the sample and the morphology of the dust. Specifically, the PbO/ZnO ratio exhibits a positive correlation with the D value. Conversely, the diversity of corresponding fractal features is negatively correlated with the D value. When the PbO content surpasses 99%, this correlation weakens, and the diversity of graphical representations displays an alternating pattern of growth and decrease. Notably, the D value and the goodness of fit (R-sq) of the D value are negatively correlated, indicating that as the complexity of the graph increases, the goodness of fit decreases. Full article

Plant–soil interactions in semi-desert conditions elicit the development of plant-specific adaptation strategies, including selective accumulation of macro- and microelements. Using an ICP-MS analysis of 12 plant species belonging to Asteraceae, Fabaceae, Poaceae, Ephedraceae, Amarantaceae, and Lamiaceae families of the Baskunchak Nature Reserve, remarkable species differences in accumulation of 22 macro- and microelements were recorded. The most common Artemisia species and Poaceae representatives belong to two different groups of plants with high content of Na, K, Zn, Cu, V and high antioxidant status and low Si typical for the former group and the opposite characteristics for the latter one. The mentioned phenomenon indicates two diverse powerful adaptation mechanisms based on the antioxidant defense and Si protection, respectively. The high frequency of remarkable levels of Se in plants with BCF exceeding 1 (Glycyrrhiza aspera, Phlomis pungens, Tanacetum nullifolium, Helichrysum nogaicum, and Jurinea ewersmannii), Zn in all species except Poa angustifolia, and Cu in the Asteraceae plants Phlomis pungens and Krascheninnikovia ceratoides suggests the significance of these elements in plant tolerance to environmental stresses. Plant–soil positive correlations were recorded for Sr (r = 0.866; p < 0.001); plant Sr, Fe, Co, Pb levels and soil salinity (r = 0.763, p < 0.001; r = 0.606, p < 0.03; r = 0.627, p < 0.02; r = 0.548, p < 0.05, respectively); and Cr only for Asteraceae species (r = 0.986, p < 0.001). The results obtained in this research may be used in plant adaptability evaluation in conditions of environmental stress. Full article

Electrical and thermal transport measurements on quenched NaCl-type Ag_1/3Pb_1/3Sb_1/3Se reveal an n-type semiconductor with a Seebeck coefficient up to −140 μVK⁻¹ and a thermal conductivity as low as 0.52 WmK⁻¹. Short-range order is indicated by disorder diffuse scattering in electron diffraction patterns. In contrast, ⁴L-Ag_0.61Pb_1.79Sb_2.61Se₆ (space group Cmcm with a = 4.2129(1) Å, b = 13.852(1) Å, and c = 20.866(1) Å, Z = 4) features the first lillianite-type structure in the system Ag/Pb/Sb/Se. It consists of slab-like NaCl-type building blocks that are interconnected via trigonal [PbSe₆] prisms. As such structures typically do not form with Te as an anion, the first “sulfosalt-like” compound, Ag_0.38Pb_0.25Sb_2.38Te₄, in the system Ag/Pb/Sb/Te forms a layered tetradymite-like structure (space group R$\stackrel{-}{3}$m with a = 4.2887(1) Å, c = 41.544(1) Å, Z = 3). Its slabs, which are separated by van der Waals gaps, are built up from three layers of distorted [MTe₆] octahedra. Crystals of Ag_0.38Pb_0.25Sb_2.38Te₄ were grown by chemical transport. Full article

Escherichia coli (E. coli) was among the first organisms to have its complete genome published (Genome Sequence of E. coli 1997 Science). It is used as a model system in microbiology research. E. coli can cause life-threatening illnesses, particularly in children and the elderly. Possible contamination by the bacteria also results in product recalls, which, alongside the potential danger posed to individuals, can have significant financial consequences. We report the detection of live Escherichia coli (E. coli) in liquid samples using a biosensor based on a field-effect transistor (FET) biosensor with B/N co-coped reduced graphene oxide (rGO) gel (BN-rGO) as the transducer material. The FET was functionalized with antibodies to detect E. coli K12 O-antigens in phosphate-buffered saline (PBS). The biosensor detected the presence of planktonic E. coli bacterial cells within a mere 2 min. The biosensor exhibited a limit of detection (LOD) of 10 cells per sample, which can be extrapolated to a limit of detection at the level of a single cell per sample and a detection range of at least 10–10⁸ CFU/mL. The selectivity of the biosensor for E. coli was demonstrated using Bacillus thuringiensis (B. thuringiensis) as a sample contaminant. We also present a comparison of our functionalized BN-rGO FET biosensor with established detection methods of E. coli k12 bacteria, as well as with state-of-the-art detection mechanisms. Full article

Swine influenza viruses (SIVs) have been circulating in swine globally and are potential threats to human health. During the surveillance of SIVs in Shandong Province, China, from 2019 to 2022, 21 reassortant G4 genotype Eurasian avian-like (EA) H1N1 subtypes containing genes from the EA H1N1 (HA and NA), 2009 pandemic (pdm/09) H1N1 virus (PB2, PB1, PA, NP, and M), and classical swine (CS) H1N1 (NS) lineages were isolated. The analysis of the key functional amino acid sites in the isolated viruses showed that two mutation sites (190D and 225E) that preferentially bind to the human α2-6 sialic acid receptor were found in HA. In PB2, three mutation sites (271A, 590S, and 591R) that may increase mammalian fitness and a mutation site (431M) that increases pathogenicity in mice were found. A typical human signature marker that may promote infection in humans, 357K, was found in NP. The viruses could replicate efficiently in mouse lungs and turbinates, and one of the H1N1 isolates could replicate in mouse kidneys and brains without prior adaption, which indicates that the viruses potentially pose a threat to human health. Histopathological results showed that the isolated viruses caused typical bronchopneumonia and encephalitis in mice. The results indicate that G4 genotype H1N1 has potential transmissibility to humans, and surveillance should be enhanced, which could provide important information for assessing the pandemic potential of the viruses. Full article

The versatile electrocaloric (EC) behaviors of the (1-x)Pb(Mg_1/3Nb_2/3)O₃-xPT (PMN-100xPT) single crystal are closely related to the multiple phase transitions under the multiple fields of electric field and temperature. In this work, the EC effect of <001>-oriented PMN-30PT single crystals with chemical composition at morphotropic phase boundary has been studied during the phase transformation process from the ferroelectric rhombohedral (R) phase to the tetragonal (T) phase. Two consecutive negative EC peaks have been achieved for the first time. Based on the projection of the EC effect in the electric field-temperature phase diagram, the relationship between the EC behaviors and the phase transitions is further established. It was found that the monoclinic (M) phase actually existed during the transformation from the R phase to the T phase, and the related R-M phase transition and M-T phase transition could both induce negative EC peaks. Under the electric field of E = 10 kV/cm, the first negative EC peaks induced by the R-M phase transition is at 57 °C with ΔT_max = −0.11 K. And the M-T phase transition can produce a higher negative EC peak, and its value can reach −0.22 K at 68 °C. Based on thermodynamic calculations, the relationship between the entropy change in different phase transitions and the EC behaviors has been further elucidated. The negative EC effect originates from the structural entropy increase in the electric field-induced phase transition process. This work not only advances the research on the electrical properties of relaxor ferroelectric single crystals but also provides a new insight into high-performance ferroelectric materials design. Full article

African swine fever virus (ASFV) poses a significant threat to the global pig industry, necessitating accurate and efficient diagnostic methods for its infection. Previous studies have often focused on a limited number of epitopes from a few proteins for detecting antibodies against ASFV. Therefore, the current study aimed to use multiple B-cell epitopes in developing an indirect Enzyme-Linked Immunosorbent Assay (ELISA) for enhanced detection of ASFV antibodies. For the expression of recombinant protein, k3 derived from 27 multiple peptides of 11 ASFV proteins, such as p72, pA104R, pB602L, p12, p14.5, p49, pE248R, p30, p54, pp62, and pp220, was used. To confirm the expression of the recombinant protein, we used the Western blotting analysis. The purified recombinant K3 protein served as the antigen in our study, and we employed the indirect ELISA technique to detect anti-ASFV antibodies. The present finding showed that there was no cross-reactivity with antibodies targeting Foot-and-mouth disease virus (FMDV), Porcine circovirus type 2 (PCV2), Pseudorabies virus (PRV), Porcine reproductive and respiratory syndrome virus (PRRSV), and Classical swine fever virus (CSFV). Moreover, the current finding was sensitive enough to find anti-ASFV in serum samples that had been diluted up to 32 times. The test (k3-iELISA) showed diagnostic specificity and sensitivity of 98.41% and 97.40%, respectively. Moreover, during the present investigation, we compared the Ingenasa kit and the k3-iELISA to test clinical pig serum, and the results revealed that there was 99.00% agreement between the two tests, showing good detection capability of the k3-iELISA method. Hence, the current finding showed that the ELISA kit we developed can be used for the rapid detection of ASFV antibodies and used as an alternative during serological investigation of ASF in endemic areas. Full article