Search Results (18)

Background/Objectives: This study was aimed to investigate the safety profile of traditional Montenegrin Njeguški cheese by quantifying genes associated with resistance to clinically important antibiotics. Methods: Samples of Njeguški cheese were sourced from three artisan producers in Montenegro, identified as A, B, and C, with three individual batches selected per producer. Quantitative PCR (qPCR) was performed on bacterial DNA extracted directly from samples to detect genes encoding resistance to macrolide–lincosamide–streptogramin B (MLS_B) [erm(A), erm(B), erm(C)], vancomycin (vanA, vanB), tetracyclines [tet(M), tet(O), tet(S), tet(K), tet(W)], β-lactams (mecA, blaZ), aminoglycosides [aac (6′)-Ie aph (2″)-Ia], and carbapenems (bla_KPC, bla_OXA-48, bla_NDM-1, bla_GES, and bla_VIM). Results: Among the MLS_B resistance genes, erm(B) was detected in all samples, erm(C) was present only in those from producer B, while erm(A) was found exclusively in batch 3 from producer C. Tetracycline resistance genes were widely distributed, except for tet(O), which was absent in batch 3 from producers A and B. Regarding β-lactam resistance, both blaZ and mecA were consistently detected across all samples, with statistically significant differences observed between producers. None of the samples tested positive for vancomycin resistance genes or the aminoglycoside resistance gene, regardless of producer. Among the carbapenemase genes analyzed, bla_NDM-1 was the only one detected, found in most samples from producers B and C. Conclusions: This research provides the first risk assessment of artisanal and commercial Njeguški cheese regarding antimicrobial resistance genes. The findings offer valuable insights to enhance the microbiological safety of traditional Montenegrin cheeses, supporting consumer confidence in local and international markets. Full article

A pilot-scale (4000 L) continuous flow electromethanogenic reactor (EMR), also known as a microbial electrochemical cell coupled with an anaerobic digester (MEC-AD), treating brewery wastewater was designed and installed at Hepworth’s Brewery, UK. This investigation presents a 4-fold increase in size compared to the next largest pilot-scale MEC-AD system presented in the literature, providing findings to inform the operation of a 52,000 L MEC-AD system (currently under construction). Housed in a 20 ft shipping container, the pilot system features four 1000 L reaction vessels arranged in series, each with a working volume of 900 L. Each reaction vessel contained 8 electrode modules. The system was tested over varying organic loading rates (OLRs), achieved through systematic reductions in hydraulic retention time (HRT). HRTs between 24 and 1.8 days were investigated to align with commercial viability targets. OLRs were observed from 0.4 to 7.5 kgCOD/m³/d. A maximum stable OLR of 6.75 kgCOD/m³/d at a HRT of 2.3 days was observed while maintaining COD removal of 65 and 88% over the first two vessels. This pilot demonstrated commercially viable performance of an EMR at a brewery, resulting in the purchase of the technology at commercial scale (52,000 L) to form part of a wastewater treatment system. Full article

The integration of a microbial electrolysis cell (MEC) is an effective strategy for enhancing the efficiency and stability of an anaerobic digestion (AD) system for energy recovery from waste-activated sludge (WAS). Typically, electrodes are arranged as separate components, potentially disrupting mixing and complicating the reactor configuration, posing challenges for the scaling up of AD-MEC coupling systems. In this study, electrodes were introduced into a continuous stirring tank reactor (CSTR) in a “stealth” manner by integrating them with the inner wall and stirring paddle. This electrode arrangement approach was validated through a sequential batch digestion experiment, resulting in a remarkable 1.5-fold increase in cumulative methane production and a shortened lag period compared to the traditional CSTR with a nonconductive inner wall and stirring paddle. Both the conductive materials (CMs) employed in the electrodes and the electrochemical processes equally contributed to the observed enhancement effect of the electrodes by regulating the evolution of the microbial community within the electrode biofilms, with a specific emphasis on the enrichment of methanogens (primarily Methanobacterium). This research offers a potential avenue to solve the contradiction between the electrode introduction and the mixing operation in AD-MEC coupling systems and to contribute to its future commercial application. Full article

Electrophotographic printing and copying processes primarily use toner, which is a mixture of colorant, polymer, and additives. Toner can be made using traditional mechanical milling techniques or more contemporary chemical polymerization techniques. Suspension polymerization provides spherical particles with less stabilizer adsorption, homogeneous monomers, higher purity, and easier control of the reaction temperature. In contrast to these advantages, however, the particle size resulting from suspension polymerization is too large for toner. To overcome this disadvantage, devices such as high-speed stirrers and homogenizers can be used to reduce the size of the droplets. This research investigated the use of carbon nanotubes (CNTs) instead of carbon black as the pigment in toner development. We succeeded in achieving a good dispersion of four different types of CNT, specifically modified with NH₂ and Boron or unmodified with long or short chains in water rather than chloroform, using sodium n-dodecyl sulfate as a stabilizer. We then performed polymerization of the monomers styrene and butyl acrylate in the presence of the different CNT types and found that the best monomer conversion and largest particles (in the micron range) occurred with CNTs modified with boron. The insertion of a charge control agent into the polymerized particles was achieved. Monomer conversion of over 90% was realized with all concentrations of MEP-51, whereas conversion was under 70% with all concentrations of MEC-88. Furthermore, analysis with dynamic light scattering and scanning electron microscopy (SEM) indicated that all polymerized particles were in the micron size range, suggesting that our newly developed toner particles were less harmful and environmentally friendly products than those typically and commercially available. The SEM micrographs clearly showed good dispersion and attachment of the CNTs on the polymerized particles (no CNT aggregation was found), which has never been published before. Full article

Methicillin-resistant Staphylococcus aureus (MRSA) is responsible for skin and soft tissue infections with multi-resistance to many antibiotics. It is thus imperative to explore alternative antimicrobial treatments to ensure future treatment options. Nisin (NIS), an antibacterial peptide produced by Lactococcus lactis, was selected to combine with Oxacillin (OX), to evaluate the antimicrobial effect and potential mechanism against MRSA. The synergistic antimicrobial effect of OX and NIS was verified by Minimal Inhibitory Concentration (MIC) assays, checkerboard analysis, time-kill curve, biofilm producing ability, and mice skin infection model in vivo. For the potential synergistic antimicrobial mechanism, the microstructure and integrity change of MRSA cells were determined by Scanning and Transmission Electron Microscope (SEM and TEM), intracellular alkaline phosphatase activity and propidium iodide staining were assayed; And transcription of mecA, main gene of MRSA resistant to OX, were detected by qRT-PCR. The results showed NIS could restore the sensitivity of MRSA to OX and inhibit biofilm production; OX + NIS can make MRSA cell deform; NIS may recover OX sensitivity by inhibiting the transcription of mecA. In vivo, mice skin infection models indicate that OX + NIS can substantially alleviate MRSA infections. As a safe commercially available biological compound, NIS and the combination of antibiotics are worth developing as new anti-MRSA biomaterials. Full article

Most large commercial vessels are propelled by low-speed two-stroke diesel engines due to their fuel economy and reliability. With increasing international concern about emissions and the rise in oil prices, improvements in engine efficiency are urgently needed. In the present work, a zero-dimensional model for a low-speed two-stroke diesel engine is developed that considers the exhaust gas bypass and geometry structures for the gas exchange model. The model was applied to a low-speed two-stroke 7G80 ME-C9 marine diesel engine and validated with engine shop test data, which consisted of the main engine performance parameters and cylinder pressure diagrams at different loads. The simulation results were in good agreement with the experimental data. Thus, the model has the ability to predict engine performance with good accuracy. After model validation, the variations in compression ratio, fuel injection timing, exhaust gas bypass valve opening portion, exhaust valve opening timing, and exhaust valve closing timing effects on engine performance were tested. Finally, the influence level of different parameters on engine performance was summarized, which can be used as a reference to determine the reasons for high fuel consumption in some cases. The developed engine performance model is considerable in digital twins for performance simulation, health management, and optimization. Full article

Lignite is an obsolete and less commercially circulated natural resource due to its low calorific value worldwide. The effective conversion of lignite into methane is important considering the global energy crunch. This study reported the effective bioconversion of organic matter released from chemically solubilized lignite to methane using two methanogenic consortia types: mixed methanogenic enrichment culture (mMEC) and SAL25-2. We demonstrated in a microcosm study that the start of methane generation was observed within seven days. Furthermore, the methane yield increased as the total organic carbon concentration of the chemically solubilized lignite solution increased. Surprisingly, methane production using mMEC was drastically enhanced by approximately 50–fold when pulverized lignite was added as conductive material (CM) to the microcosms. To the best of our knowledge, this is the highest number of times methane production increased relative to the control. Our results demonstrated that bioaugmentation using a methanogenic consortium and adding pulverized lignite as CM could facilitate the bioconversion of chemically solubilized lignite solution to methane and lead to effective utilization of subterranean lignite, regarded as a neglected natural resource, without any further excavation processes. Full article

Benefiting from the large-scale commercial use of 5G, smart campuses have attracted increasing research attention in recent years and are expected to revolutionize traditional campus activities. However, there are some obstacles that hinder the practical deployment of MEC (multi-access edge computing). First, traditional information infrastructures on campus cannot support latency-sensitive and computing-intensive smart applications, such as AR/VR, live interactive lectures and digital twin experiments. In addition, the mixture of old and new applications, isolated data islands and heterogeneous equipment management introduce more challenges. Moreover, the existing MEC framework proposed by ETSI and 3GPP cannot meet the specific deployment requirements of smart campuses, e.g., educational data security, real-time interactive applications, heterogeneous connections, and others. In this paper, we propose a 5G-based architecture for smart education information infrastructure; a new dedicated cloud architecture eMEC (educational multi-access edge computing) is defined. It consists of a UGW (universal access gateway) and an eMEP (educational multi-access edge computing platform), making it possible to satisfy education-specific requirements and long-term evolution. Furthermore, we implement the framework and conduct real-world field tests for eMEC in a university campus. Based on the framework and practical field tests, we also conduct a measurement study to unveil the spatial-temporal characteristics of mobile users in the smart campus and discuss exploiting them for better network performance. The experimental results show that the system achieves satisfactory performance in terms of both throughput and latency. Full article

Microbial electrolysis cells (MECs) have attracted significant interest as sustainable green hydrogen production devices because they utilize the environmentally friendly biocatalytic oxidation of organic wastes and electrochemical proton reduction with the support of relatively lower external power compared to that used by water electrolysis. However, the commercialization of MEC technology has stagnated owing to several critical technological challenges. Recently, many attempts have been made to utilize nanomaterials in MECs owing to the unique physicochemical properties of nanomaterials originating from their extremely small size (at least <100 nm in one dimension). The extraordinary properties of nanomaterials have provided great clues to overcome the technological hurdles in MECs. Nanomaterials are believed to play a crucial role in the commercialization of MECs. Thus, understanding the technological challenges of MECs, the characteristics of nanomaterials, and the employment of nanomaterials in MECs could be helpful in realizing commercial MEC technologies. Herein, the critical challenges that need to be addressed for MECs are highlighted, and then previous studies that used nanomaterials to overcome the technological difficulties of MECs are reviewed. Full article

Susceptibility testing can yield variable results because it is method (commercial or reference), agent, and species dependent. Therefore, in order for results to be clinically relevant, MICs (minimal inhibitory concentrations) or MECs (minimal effective concentrations) should help in selecting the best treatment agent in the clinical setting. This is accomplished by categorical endpoints, ideally, breakpoints (BPs) and/or ECVs/ECOFFs (epidemiological cutoff values). BPs and ECVs are available by the reference methods (CLSI [Clinical and Laboratory Standards Institute] and EUCAST [European Committee on Antifungal Susceptibility Testing]) for a variety of species/agent combinations. The lack of clinical data precludes establishment of BPs for susceptibility testing by the commercial methods and ECVs have only been calculated for the Etest and SYO assays. The goal of this review is to summarize the variety of commercial methods for antifungal susceptibility testing and the potential value of Etest and SYO ECVs for detecting mutants/non-wild type (NWT) Candida isolates. Therefore, the literature search focused on publications where the commercial method, meaning MICs and ECVs, were reported for specific NWT isolates; genetic mutations have also been listed. For the Etest, the best performers recognizing the NWT were anidulafungin ECVs: 92% for the common species; 97% for C. glabrata and fluconazole ECVs, mostly for C. parapsilosis (45 NWT isolates). By the SYO, posaconazole ECVs recognized 93% of the C. albicans and 96% of the C. parapsilosis NWT isolates and micafungin ECVs 94% (mostly C. albicans and C. glabrata). Smaller sets, some with clinical data, were also listed. These are promising results for the use of both commercial methods to identify antifungal resistance (NWT isolates). However, ECVs for other species and methods need to be defined, including the C. neoformans complex and emerging species. Full article

Coagulase-negative staphylococci are commensals that are known to be prevalent in most environments, and they are also an important reservoir of antimicrobial-resistant genes. Staphylococcal infections in animal husbandry are a high economic burden. Thus, we aimed to determine the prevalence and species diversity of methicillin-resistant coagulase-negative staphylococci (MRCoNS) in poultry slaughtered for human consumption and to study the antimicrobial resistance of the isolates. Swab samples were recovered from 220 commercial chickens, homebred chickens and quails. Species identification was performed using MALDI-TOF. Antimicrobial susceptibility testing was performed by the disc diffusion method against 14 antimicrobials. The presence of antimicrobial-resistant genes was investigated by polymerase chain reaction. Totals of 11 (19.6%), 13 (20.3%), and 51 (51%) MRCoNS were isolated from commercial chickens, homebred chickens and quails, respectively. S. lentus was isolated from all homebred chickens, whereas 11 S. lentus and 2 S. urealyticus were isolated from commercial chickens. As for quails, the most prevalent MRCoNS were S. urealyticus. Almost all isolates had a multidrug-resistant profile and carried the mecA gene. Most isolates showed resistance to erythromycin, clindamycin, penicillin, tetracycline, ciprofloxacin and fusidic acid and harbored the ermA, ermB, ermC, mphC tetK, tetL, tetM and tetO genes. This study showed a frequent occurrence of multidrug resistance in MRCoNS isolated from healthy poultry in Portugal. Full article

The aim of the study was to assess the effect of anode materials, namely a carbon nanotube (CNT)-buckypaper and a commercial carbon paper (CP) on the performance of a two-chamber microbial electrolysis cell (MEC), in terms of hydrogen production and main electrochemical characteristics. The experiments were performed using both acetate-based synthetic wastewater and real wastewater, specifically the effluent of a dark fermentative hydrogenogenic reactor (fermentation effluent), using cheese whey (CW) as substrate. The results showed that CP led to higher hydrogen production efficiency and current density compared to the CNT-buckypaper anode, which was attributed to the better colonization of the CP electrode with electroactive microorganisms, due to the negative effects of CNT-based materials on the bacteria metabolism. By using the fermentation effluent as substrate, a two-stage process is developed, where dark fermentation (DF) of CW for hydrogen production occurs in the first step, while the DF effluent is used as substrate in the MEC, in the second step, to further increase hydrogen production. By coupling DF-MEC, a dual environmental benefit is provided, combining sustainable bioenergy generation together with wastewater treatment, a fact that is also reinforced by the toxicity data of the current study. Full article

Carbon constraints, as well as the growing hazard of greenhouse gas emissions, have accelerated research into all possible renewable energy and fuel sources. Microbial electrolysis cells (MECs), a novel technology able to convert soluble organic matter into energy such as hydrogen gas, represent the most recent breakthrough. While research into energy recovery from wastewater using microbial electrolysis cells is fascinating and a carbon-neutral technology that is still mostly limited to lab-scale applications, much more work on improving the function of microbial electrolysis cells would be required to expand their use in many of these applications. The present limiting issues for effective scaling up of the manufacturing process include the high manufacturing costs of microbial electrolysis cells, their high internal resistance and methanogenesis, and membrane/cathode biofouling. This paper examines the evolution of microbial electrolysis cell technology in terms of hydrogen yield, operational aspects that impact total hydrogen output in optimization studies, and important information on the efficiency of the processes. Moreover, life-cycle assessment of MEC technology in comparison to other technologies has been discussed. According to the results, MEC is at technology readiness level (TRL) 5, which means that it is ready for industrial development, and, according to the techno-economics, it may be commercialized soon due to its carbon-neutral qualities. Full article

The use of microbial fuel cells (MFCs) is quickly spreading in the fields of bioenergy generation and wastewater treatment, as well as in the biosynthesis of valuable compounds for microbial electrolysis cells (MECs). MFCs and MECs have not been able to penetrate the market as economic feasibility is lost when their performances are boosted by nanomaterials. The nanoparticles used to realize or decorate the components (electrodes or the membrane) have expensive processing, purification, and raw resource costs. In recent decades, many studies have approached the problem of finding green synthesis routes and cheap sources for the most common nanoparticles employed in MFCs and MECs. These nanoparticles are essentially made of carbon, noble metals, and non-noble metals, together with a few other few doping elements. In this review, the most recent findings regarding the sustainable preparation of nanoparticles, in terms of syntheses and sources, are collected, commented, and proposed for applications in MFC and MEC devices. The use of naturally occurring, recycled, and alternative raw materials for nanoparticle synthesis is showcased in detail here. Several examples of how these naturally derived or sustainable nanoparticles have been employed in microbial devices are also examined. The results demonstrate that this approach is valuable and could represent a solid alternative to the expensive use of commercial nanoparticles. Full article

Homogeneous olefin polymerization catalysts are activated in situ with a co-catalyst ([PhN(Me)₂-H]⁺[B(C₆F₅)₄]⁻ or [Ph₃C]⁺[B(C₆F₅)₄]⁻) in bulk polymerization media. These co-catalysts are insoluble in hydrocarbon solvents, requiring excess co-catalyst (>3 eq.). Feeding the activated species as a solution in an aliphatic hydrocarbon solvent may be advantageous over the in situ activation method. In this study, highly pure and soluble ammonium tetrakis(pentafluorophenyl)borates ([Me(C₁₈H₃₇)₂N-H]⁺[B(C₆F₅)₄]⁻ and [(C₁₈H₃₇)₂NH₂]⁺[B(C₆F₅)₄]⁻) containing neither water nor Cl⁻ salt impurities were prepared easily via the acid–base reaction of [PhN(Me)₂-H]⁺[B(C₆F₅)₄]⁻ and the corresponding amine. Using the prepared ammonium salts, the activation reactions of commercial-process-relevant metallocene (rac-[ethylenebis(tetrahydroindenyl)]Zr(Me)₂ (1-ZrMe₂), [Ph₂C(Cp)(3,6-^tBu₂Flu)]Hf(Me)₂ (3-HfMe₂), [Ph₂C(Cp)(2,7-^tBu₂Flu)]Hf(Me)₂ (4-HfMe₂)) and half-metallocene complexes ([(η⁵-Me₄C₅)Si(Me)₂(κ-N^tBu)]Ti(Me)₂ (5-TiMe₂), [(η⁵-Me₄C₅)(C₉H₉(κ-N))]Ti(Me)₂ (6-TiMe₂), and [(η⁵-Me₃C₇H₁S)(C₁₀H₁₁(κ-N))]Ti(Me)₂ (7-TiMe₂)) were monitored in C₆D₁₂ with ¹H NMR spectroscopy. Stable [L-M(Me)(NMe(C₁₈H₃₇)₂)]⁺[B(C₆F₅)₄]⁻ species were cleanly generated from 1-ZrMe₂, 3-HfMe₂, and 4-HfMe₂, while the species types generated from 5-TiMe₂, 6-TiMe₂, and 7-TiMe₂ were unstable for subsequent transformation to other species (presumably, [L-Ti(CH₂N(C₁₈H₃₇)₂)]⁺[B(C₆F₅)₄]⁻-type species). [L-TiCl(N(H)(C₁₈H₃₇)₂)]⁺[B(C₆F₅)₄]⁻-type species were also prepared from 5-TiCl(Me) and 6-TiCl(Me), which were newly prepared in this study. The prepared [L-M(Me)(NMe(C₁₈H₃₇)₂)]⁺[B(C₆F₅)₄]⁻-, [L-Ti(CH₂N(C₁₈H₃₇)₂)]⁺[B(C₆F₅)₄]⁻-, and [L-TiCl(N(H)(C₁₈H₃₇)₂)]⁺[B(C₆F₅)₄]⁻-type species, which are soluble and stable in aliphatic hydrocarbon solvents, were highly active in ethylene/1-octene copolymerization performed in aliphatic hydrocarbon solvents. Full article