Search Results (124)

Microalgae proteins are increasingly recognized in the food and nutraceutical industries for their functional versatility and high nutritional value. Mild alkaline treatment is commonly used for cell wall degradation and intracellular protein solubilization, consequently enhancing the protein extraction yield. The findings of this study reveal that alkaline treatment alone, even at higher NaOH concentration (up to 0.3 M) and treatment time (up to 90 min), was ineffective (max. 2.4% yield) for the extraction of protein from Auxenochlorella protothecoides biomass. This challenge was significantly reduced through synergistic application of mechanical cell disruption using high-pressure homogenization (HPH) and alkaline solubilization. Single-pass HPH (35 k psi) alone without alkaline treatment led to 52.3% protein solubilization from wet biomass directly harvested from culture broth, while it was only 18.5% for spray-dried biomass. The combined effect of HPH and alkaline (0.1 M NaOH) treatment significantly increased protein extraction yield to 68.0% for a spray-dried biomass loading of 50 g L⁻¹. Through replacing spray-dried biomass with wet biomass, the requirement of NaOH was reduced by 5-fold to 0.02 M to achieve a similar yield of 68.1%. The process integration of HPH with the mild alkaline solubilization and utilization of wet biomass from culture broth showed high potential for industrialization of microalgae protein extraction. This method achieves high extraction yield while reducing alkaline waste and eliminating the need for energy-consuming drying of biomass, thereby minimizing the environmental impact. Full article

Goat milk has lower allergenicity and high commercial value but faces storage limitations, often leading to waste. Converting it into powder increases costs, making blending with non-dairy ingredients, such as rice flour, a viable alternative to reduce costs and potentially improve nutrition. In this this study, we developed five dairy compounds by replacing 10–49% of goat milk powder with rice flour. We evaluated their nutritional and physical properties compared to pure goat milk powder and rice flour. Analyses included water activity, total solids, protein, lipids, energy value, color, flowability, wettability, polyphenol content, mineral profile, and morphology. Higher rice flour content increased water activity and improved wettability but reduced flowability, classifying most compounds as reasonable to fair in flow, except for the 10% rice flour sample. All samples met Brazilian standards, which require ≥13 g/100 g of protein. The dairy compounds showed a yellow-greenish color, with significant color differences compared to goat milk powder, particularly at 49% rice flour. Goat milk powder had higher mineral contents (Ca, K, Mg, Na, P, Zn). Total polyphenol content was highest in the 10% rice flour compound, while individual polyphenols were undetectable. Overall, the formulation proved viable for cost reduction while maintaining nutritional quality. Full article

Sulfion oxidation reaction (SOR) has great potential in replacing oxygen evolution reaction (OER) and boosting highly efficient hydrogen evolution. The development of highly active and stable SOR electrocatalysts is crucial for assisting hydrogen production with low energy consumption. In this work, multiphase NiCoFe-based layered double hydroxide (namely NiCoFe-LDH) has been synthesized via a facile seed-assisted heterogeneous nucleation method. Benefiting from its unique microsized hydrangea-like structure and synergistic active phases, the catalyst delivers substantial catalytic interfaces and reactive centers for SOR. Consequently, NiCoFe-LDH electrode achieves a remarkably low potential of 0.381 V at 10 mA cm⁻² in 1 M KOH + 0.1 M Na₂S, representing a significant reduction of 0.98 V compared to conventional OER. Notably, under harsh industrial conditions (6 M KOH + 0.1 M Na₂S, 80 °C), the electrolysis system based on NiCoFe-LDH||NF pair exhibits a cell potential of only 0.71 V at 100 mA cm⁻², which shows a greater decreasing amplitude of 1.05 V compared with that of traditional OER/HER systems. Meanwhile, the NiCoFe-LDH||NF couple could maintain operational stability for 100 h without obvious potential fluctuation, as well as possessing a lower energy consumption of 1.42 kWh m⁻³ H₂. Multiphase eletrocatalysis for SOR could indeed produce hydrogen with low-energy consumption. Full article

This study explores the use of embedded piezo sensor (EPS) employing the Electro-Mechanical Impedance (EMI) technique for real-time corrosion monitoring in reinforced E-waste concrete exposed to chloride-laden environments. With the growing environmental concerns over electronic waste (E-waste) and the demand for sustainable construction practices, printed circuit board (PCB) materials were incorporated as partial replacements for coarse aggregates in concrete. The experiment utilized M30-grade concrete mixes, substituting 15% of natural coarse aggregates with E-waste, aiming to assess both sustainability and structural performance without compromising durability. EPS configured with Lead Zirconate Titanate (PZT) patches were embedded into both conventional and E-waste concrete specimens. The EPS monitored the changes in the form of conductance and susceptance signatures across a 100–400 kHz frequency range during accelerated corrosion exposure over a 60-day period in a 3.5% NaCl solution. The corrosion progression was evaluated qualitatively through electrical impedance signatures, visually via rust formation and cracking, and quantitatively using the Root Mean Square Deviation (RMSD) of EMI signatures. The results showed that the EMI technique effectively captured the initiation and propagation stages of corrosion. E-waste concrete exhibited earlier and more severe signs of corrosion compared to conventional concrete, indicated by faster increases and subsequent declines in conductance and susceptance and higher RMSD values during the initiation phase. The EMI-based system demonstrated its capability to detect microstructural changes at early stages, making it a promising method for Structural Health Monitoring (SHM) of sustainable concretes. The study concludes that while the use of E-waste in concrete contributes positively to sustainability, it may compromise long-term durability in aggressive environments. However, the integration of EPS and EMI offers a reliable, non-destructive, and sensitive technique for real-time corrosion monitoring, supporting preventive maintenance and improved infrastructure longevity. Full article

The southeastern Hainan Island boasts abundant hydrothermal resources, most of which are exposed as thermal springs. Analyzing the hydrochemical characteristics, hydrochemical evolutionary mechanisms, and material transition of these resources is significant for their exploitation and utilization. This study investigated the Nanping geothermal field in southeastern Hainan Island, using five groups of geothermal water samples collected in 2022, as well as seven groups of geothermal water samples, one group of shallow groundwater samples, and one group of surface water samples taken in 2023. Specifically, this study examined water–rock interactions in the geothermal field using the Gibbs model, ion ratios, chloro-alkaline indices (CAIs), and the sodium adsorption ratio (SAR). Moreover, the mineral transfer process in groundwater was analyzed using inverse hydrogeochemical simulation. The results indicate that in the study area the geothermal water temperatures range from 64 °C to 80 °C, pH values from 8.32 to 8.64, and TDS concentrations from 431 mg/L to 623 mg/L. The primary hydrochemical types of geothermal water in the study area include Cl-Na and Cl·HCO₃-Na, suggesting low-temperature, slightly alkaline geothermal water. The hydrochemical components of geothermal water in the study area are primarily affected by water–rock interactions. Besides the dissolution of silicate minerals and halite, cation exchange reactions contribute greatly to the formation of Na⁺ and K⁺ in geothermal water. Geothermal water receives recharge from the atmospheric precipitation of the Diaoluo Shan area in the northwest of the study area, with the recharge elevation ranging from 967 to 1115 m. The inverse hydrogeochemical simulation results reveal that during the water–rock interactions, silicate minerals, clay minerals, gypsum, and halite dissolve, while quartz and carbonate minerals precipitate. Additionally, these processes are accompanied by cation exchange reactions dominated by the replacement of Na⁺ in surrounding rocks by Ca²⁺ in geothermal water. This study can provide a geological basis for the exploitation, utilization, and management of the Nanping geothermal field. Full article

This study evaluates the potential of biomass fuels (10 wt% and 20 wt%) as partial coal replacements in combustion and their effects on clinker performance. Cement was produced by co-grinding clinker with gypsum, and hydration products were analyzed. Potassium and sodium carbonates were introduced to create highly alkaline conditions, thereby simulating the effect of alkali metals in biomass-derived fuel ash on the mineral phases of clinker under high substitution ratios. The results showed biomass fuels’ low ignition point and high volatile matter content improved mixed fuels combustion, increasing the average combustion rate by 0.52%~2.28% and reducing the ignition temperature by up to 56 °C. At low substitution levels, biomass ash did not adversely affect clinker mineral composition or cement properties. However, the highly alkaline environment suppressed the formation of tricalcium silicate (C₃S) in the clinker, resulting in an increased content of free calcium oxide(f-CaO). Simultaneously, it promotes the formation of sulfates (K₂SO₄, Na₂SO₄) and sodium silicate (Na₂Si₂O₅). Full article

To address the demands of the low-carbon era, this study proposed a solution by using eggshell powder (ESP), fly ash, and ground granulated blast furnace slag together with alkaline solution in the preparation of lightweight geopolymer foam concrete (LWGFC). The aim of this study is to investigate the influence of replacing precursor materials with 5–20% ESP on the expansion behavior, physical, mechanical characteristics, and thermal conductivity of LWGFC. Additionally, the study examines the effect of varying the silicate modulus (SiO₂/Na₂O ratios of 1.0, 1.25, and 1.5) on the properties of LWGFC. Incorporating ESP from 5% to 20% with a constant SiO₂/Na₂O ratio reduced the initial setting time, while a high SiO₂/Na₂O ratio controlled the setting time and expansion volume. The high SiO₂/Na₂O ratio decreased the porosity and enhanced the compressive strength of the LWGFC but increased the thermal conductivity. The inclusion of more than 10% ESP content negatively affected compressive strength; however, a high SiO₂/Na₂O ratio can mitigate this detrimental effect. The thermal conductivity of optimal-content ESP mixtures with a SiO₂/Na₂O ratio of 1.0 was about 0.84 W/m·K, which is 2.1% lower than mixtures with a ratio of 1.25 and 18.6% lower than those with a ratio of 1.5. High-content ESP mixtures had a density of 1707 kg/m³, 0.97 W/m·K, and a compressive strength of 18.9 MPa at a low SiO₂/Na₂O ratio. Finally, the inclusion of ESP in the LWGFC, along with the use of an appropriate silicate modulus, resulted in improved strength development while decreasing porosity. Full article

This study investigated the effect of total substitution of NaCl with KCl and MgCl₂ on the physicochemical, microbiological, and textural characteristics of pickled apples during 35 days of fermentation. The results showed that the pH for all brine-pickled apples decreased significantly (p < 0.05) during the fermentation process. The highest quantity (1077.59 ± 17.56 mg lactic acid/100 g product) of lactic acid was detected on the 28th day for the samples fermented with NaCl. The concentration of metallic ions (Na⁺, K⁺, Mg²⁺) in the brine-pickled apple samples showed a peak on the 14th day of fermentation, followed by a decrease on the 21st day. The antioxidant activity for all types of saline solutions increased as fermentation progressed. The total LAB count increased rapidly until the seventh day for all the samples. At the end of the storage period, a decrease in LAB count was observed for all tested samples. The obtained results revealed that replacing NaCl with KCl or MgCl₂ led to small changes in the characteristics of the pickled apples, and is thus a promising option for dietary sodium reduction. Full article

We hypothesize that predictable variations in environmental conditions caused by night/day cycles created opportunities and hazards that initiated information dynamics central to life’s origin. Increased daytime temperatures accelerated key chemical reactions but also caused the separation of double-stranded polynucleotides, leading to hydrolysis, particularly of single-stranded RNA. Daytime solar UV radiation promoted the synthesis of organic molecules but caused broad damage to protocell macromolecules. We hypothesize that inter-related simultaneous adaptations to these hazards produced molecular dynamics necessary to store and use information. Self-replicating RNA heritably reduced the hydrolysis of single strands after separation during warmer daytime periods by promoting sequences that formed hairpin loops, generating precursors to transfer RNA (tRNA), and initiating tRNA-directed evolutionary dynamics. Protocell survival during daytime promoted sequences in self-replicating RNA within protocells that formed RNA–peptide hybrids capable of scavenging UV-induced free radicals or catalyzing melanin synthesis from tyrosine. The RNA–peptide hybrids are precursors to ribosomes and the triplet codes for RNA-directed protein synthesis. The protective effects of melanin production persist as melanosomes are found throughout the tree of life. Similarly, adaptations mitigating UV damage led to the replacement of Na⁺ by K⁺ as the dominant mobile cytoplasmic cation to promote diel vertical migration and selected for homochirality. We conclude that information dynamics emerged in early life through adaptations to predictably fluctuating opportunities and hazards during night/day cycles, and its legacy remains observable in extant life. Full article

A room-temperature synthesis was used to prepare ZIF-76 by combining the organic linker imidazole and 5-chlorobenzimidazole, with the addition of NaOH as a modulator. The synthesis process was optimized by modifying the existing method, which includes the introduction of heating, different types of solvent, and adjustment to the reactant ratio. The synthesized MOFs were characterized to evaluate their crystallinity, textural properties and surface morphology. The result demonstrated that the introduction of heat led to the formation of ZnO whereas the replacement of DEF–DMF with methanol resulted in the production of amorphous material. Moreover, a change in precursor ratio led to the production of ZIF-76 with a low yield and surface area. Meanwhile, CO₂ adsorption was performed in a pressure range of 0–1.2 bar at 298.15 K. Notably, ZIF-76_B with a low surface area exhibited a greater CO₂ uptake capacity of 1.43 mmol/g compared to ZIF-76_A, which recorded 1.29 mmol/g. Furthermore, the isotherm and kinetic models were applied to fit the experimental CO₂ adsorption data. The analysis of the adsorption models indicated that the CO₂ adsorption was primarily governed by a monolayer formation on a homogeneous surface. Nevertheless, there was a slight diversion in terms of predicted q_m with experimental data, which could be attributed to the adsorption not yet reaching equilibrium. Additionally, the kinetic model was applied to the initial stage of adsorption in the pressure range of 0–0.24 bar. The Elovich model was found to fit better with the CO₂ uptake capacity data of ZIF-76_A and ZIF-76_B suggesting that the adsorption process may involve multiple mechanisms. Full article

The mechanical properties of Mn- and Fe-doped Na_0.5Bi_0.5TiO₃ ceramics in unpoled and poled states were examined and analyzed for the first time through measurements of Young’s modulus, the elastic modulus, Poisson’s number, compressibility modulus K, hardness, fracture toughness and bending strength on one hand and by stress–strain measurements on the other hand. It was found that both the introduction of Fe and Mn ions into Na_0.5Bi_0.5TiO₃ and E-poling lead to improvements in their mechanical properties. The additives also cause improvement of the piezoelectric properties. The stress–strain curves revealed a changing mechanical response with the Mn and Fe doping of the NBT. With the doping, there was a decrease in coercive stress, which enhanced the remnant strain. In contrast, the E-poling led to an increase in the coercive stress, which reduced the remnant strain. Induced internal stresses associated with non-180° domain switching were determined. It was found that the investigated materials displayed significant ferroelastic deformation and large remnant polarization even under external stress of 180–250 MPa. Modification of NBT by Mn and Fe ions and E-poling were found to be effective ways of improving actuator performance and controlling operating stresses in order to minimize irreversible fatigue damage. The results suggest that the investigated materials could replace PZT ceramics in actuator applications where high blocking stress is required. Full article

Uranium mineralization related to Na-metasomatism is known as Na-metasomatite or albitite-type. They represent the fourth-largest uranium resource globally and constitute fifty thousand tons of U resources. The present work gives details about well-known Na-metasomatic uranium occurrences worldwide in terms of structures, metasomatic stages, geochemical characteristics, fluid inclusions, and compositions of stable isotopes. The host rocks are granite, granitoid, and metamorphosed volcano-sedimentary rocks, and these rocks experienced two/three deformational stages. U mineralization is mainly confined to faults and characterized by granitic intrusive, cataclasis, mylonitization, and albitization. The albitized rocks exhibit two to three metasomatic and late hydrothermal stages. The first stage is marked by the replacement of pre-existing host minerals during a ductile shear regime. The second stage is related to U mineralization contemporaneous with the brittle deformation. The albitized rocks exhibit depletion in Si, K, Ba, and heavy rare-earth elements relative to the host rocks and enrichments in Na, Ca, U, Zr, P, V, Sr, and light rare-earth elements. U-enrichment is positively correlated with Na, Mo, Cu, and high-field strength elements. The pressure–temperature (P-T) conditions of U mineralization are considered to be epithermal and mesothermal. Fluid inclusion studies indicate that the mineralizing fluids were rich in Na⁺, Mg²⁺, Cl⁻, CO₂, H₂O, F⁻, and PO₄³⁻ and meteoric–magmatic derived. The geological processes responsible for the genesis of Na-metasomatic U deposits of the North Delhi Fold Belt (India) are comparable with some international examples, i.e., Australia, Ukraine, Cameroon, Brazil, Guyana, China, and the USA. Full article

Mica is a kind of important rock-forming mineral in the lithosphere of Earth, which can be a superior tool used to trace the origin and late evolution of rock. The Jian forsterite jade (a kind of geological skarn) is an emerging kind of gemstone in China with a beautiful color and luster, discovered in Ji’an County, Jilin Province, Northeast China. It is mainly composed of rare Mg-rich forsterite (Mg^# (Mg/(Mg + Fe²⁺) up to 99), serpentine and brucite. The source of hydrothermal fluid triggering the late metamorphism (the serpentinization of forsterite) of forsterite jade deposits remains unclear. We report a series of phlogopites with a regular range of mineral compositions in the forsterite jade deposit. Micrographs show that the phlogopites are associated with forsterite and coexist with serpentine in forsterite jade, tourmaline and tremolite in the contact zone, and plagioclase in pegmatite, and the related replacement of phlogopite seems to have not occurred. The phlogopites that occurred as single grains or veinlets in forsterite jade named type I are characterized by high X_Mg, ranging from ~0.98 to ~0.95, and the phlogopites that occurred in the contact zone of forsterite jade and pegmatite named type II are rich in Fe, with a range of X_Mg from ~0.82 to ~0.66. Additionally, the type II phlogopites are also rich in Ti, Mn, Cl, Li, Rb, Zn, V, Co, Nb and Ta but poor in Na, Sr and F compared to the type I phlogopite. Petrological and mineralogical characteristics and geochemical compositions suggest that the phlogopites are crystallized from the corresponding fluid component by hydrothermal metasomatism. The abundant Mg of the fluid phase is produced during the serpentinization of forsterite, triggered by pegmatitic hydrothermal fluid, and other main materials like K, Al, Si and H₂O are provided by the intrusive pegmatite. With the occurrence of and regular compositional variation in phlogopites in the forsterite jade deposit, we suppose that the hydrothermal fluid triggering the serpentinization of the Jian forsterite jade is produced by the intrusive pegmatite. Full article

In the current work, aluminum dross from the aluminum industry and fired-clay brick waste (Homra) were combined with alkaline activators (Na₂SiO₃/NaOH) with varying molarities of NaOH to create insulating geopolymer bricks. An alkaline activator with an (S/L) ratio of 3/1 was combined with Homra to replace it partly. The mixture was then molded into 50 × 50 × 50 mm³ stainless steel molds. Water absorption, compressive strength, bulk density, and apparent porosity of the produced geopolymer were measured at various curing durations and NaOH molarities. The findings showed that adding more aluminum dross waste replacement leads to a decrease in bulk density and compressive strength and an increase in the creation of pores that improve the produced bricks’ ability to insulate against heat. Using 8 M of NaOH after 28 days, the findings revealed that 3% aluminum dross waste replacement has a compressive strength of about 8.6 MPa, water absorption of 14.6%, bulk density of 1.307 g/cm³, and thermal conductivity of 0.32 W/m·K. The Egyptian standard, ASTM C62, satisfies these outcomes. Using DesignBuilder energy simulation software version 6.1.06, the constructed insulating brick under ideal circumstances was utilized to calculate its contribution performance in energy consumption. The annual energy consumption was reduced by about 21% compared to traditional hollow cement bricks. Full article

The tetrazolium (TZ) test is a reliable but destructive method for identifying viable seeds. In this study, a non-destructive seed viability analysis method for Allium ulleungense was developed using multispectral imaging and stacking ensemble learning. Using the Videometerlab 4, multispectral imaging data were collected from 390 A. ulleungense seeds subjected to NaCl-accelerated aging treatments with three repetitions per treatment. Spectral values were obtained at 19 wavelengths (365–970 nm), and seed viability was determined using the TZ test. Next, 80% of spectral values were used to train Decision Tree, Random Forest, LightGBM, and XGBoost machine learning models, and 20% were used for testing. The models classified viable and non-viable seeds with an accuracy of 95–91% on the K-Fold value (n = 5) and 85–81% on the test data. A stacking ensemble model was developed using a Decision Tree as the meta-model, achieving an AUC of 0.93 and a test accuracy of 90%. Feature importance and SHAP value assessments identified 570, 645, and 940 nm wavelengths as critical for seed viability classification. These results demonstrate that machine learning-based spectral data analysis can be effectively used for seed viability assessment, potentially replacing the TZ test with a non-destructive method. Full article