Search Results (1,315)

Modern agriculture depends heavily on machinery to maximize operational efficiency and, consequently, profitability, but the wear-and-tear on the mechanical components of machinery due to ageing can lead to reduced efficiency, more downtime, and higher maintenance expenses, thus raising the operative costs. These problems have been addressed by the use of specific lubricant additives for machinery; however, additives have known disadvantages, such as compatibility restrictions and environmental concerns, which represent critical issues especially in case of possible dispersion in the environment. Modern industry is always looking for techniques and solutions to increase efficiency and productivity, and this study investigates the possible advantages of employing nanotechnology in lubricant formulations. Amongst all possible substances, SiO₂ nanoparticles are increasingly promising as lubricant additives due to their unique properties, which include heat resistance, high levels of stability, and good biocompatibility. Moreover, biolubricants, derived from renewable sources, offer an environmentally friendly alternative to conventional lubricants. This article contributes to the field of agricultural technology by demonstrating the potential of SiO₂ nanoparticles in formulations of biolubricants thought to be used in agricultural machines. Key degradation parameters, including density, viscosity, total acid number (TAN), total base number (TBN), oxidation, and elemental composition, were systematically analysed. The results showed that SiO₂ nanoparticles mitigate viscosity loss and density increase, optimize TAN and TBN, reduce oxidation of the biolubricants by up to 17.7% at 1.00 wt% SiO₂, and stabilize elemental composition during ageing. Nanoparticles remained uniformly dispersed without sedimentation for over 30 days. This provides insights that can prevent machinery performance degradation over time, reduce lubricant changes, and suggest a more sustainable and environmentally friendly lubrication solution, thus promoting more sustainable industry. Full article

With the rapid development of electronic devices and wireless communication systems, electromagnetic interference pollution has become a critical concern, driving the urgent demand for high-performance, lightweight, and flexible electromagnetic interference (EMI) shielding materials. To endow fabrics with excellent electromagnetic shielding, a Fe₃O₄/Ag/RGO ternary nanocomposite-coated cotton fabric for electrical conductivity and EMI shielding application was developed. The cotton fabric pretreated with dopamine was coated with graphene oxide (GO), followed by silver nanoparticles (Ag) via a microwave-assisted chemical reduction method, and Ag/reduced graphene oxide (RGO)-coated cotton. Subsequently, nano-ferroferric oxide was deposited on Ag/RGO-coated cotton fabric using a coprecipitation method. The results show that the surface resistance of Fe₃O₄/Ag/RGO-coated cotton fabric arrives at 1.68 Ω/sq, demonstrating excellent electrically conductive performance. Fe₃O₄/Ag/RGO-coated cotton fabric demonstrates outstanding electromagnetic shielding performance, with SE values exceeding 45 dB across the entire 1–18 GHz range. The flexibility and superior electromagnetic shielding performance of Fe₃O₄/Ag/RGO-coated cotton fabric render it a promising candidate for applications in wearable electronics, aerospace, advanced protective systems, and military protective clothing. Full article

The efficient on-demand generation of ClO₂ is critical for disinfection and food preservation. However, the development of safe and efficient strategies for gaseous ClO₂ production remains challenging. Herein, we report a stable and efficient electrochemical system for ClO₂ production based on rutile TiO₂ nanorod arrays (TiO₂ NAs). Electrochemical optimization suggests that a cathodic potential of −0.10 V (vs. Ag/AgCl) in an electrolyte solution of 1 M NaClO₃ with 5 M H₂SO₄ achieves the highest ClO₂ production efficiency. Mechanistic studies reveal that ClO₂ generation proceeds via an O₂-induced pathway, in which electrochemically generated H₂O₂ from 2-e⁻ O₂ reduction reacts in situ with ClO₃⁻ to form ClO₂, eliminating the need for external H₂O₂ storage and significantly improving operational safety. Furthermore, when decorated with RuO_x nanoparticles, TiO₂ NA cathodes achieve enhanced catalytic performance and excellent stability. In addition, the generated ClO₂ in the electrolyte solution can be delivered via gas pumping. This ClO₂ atmosphere exhibits antibacterial efficiencies exceeding 99% against Escherichia coli and Staphylococcus aureus, and significantly reduced weight loss and preserved fruit hardness in longan samples during 8 days of storage. Overall, this work presents a safe, efficient approach for ClO₂ generation with strong potential for practical disinfection in the food preservation field. Full article

In this study, a cellulose nanocrystal (CNC)-supported Ag–ZnO nanocomposite was synthesized via a hydrothermal route as a polymeric photocatalyst for efficient UV-A light-driven dye degradation. The renewable CNC framework provides abundant hydroxyl functional groups for nanoparticle anchoring, enhancing dispersion and interfacial charge transfer. Structural (XRD, FTIR, TEM, PL, and XPS) and thermal (TGA and DTG) analyses confirm successful incorporation of Ag nanoparticles and retention of CNC crystallinity. The composite exhibits a reduced optical bandgap (3.02 eV) and demonstrates superior photocatalytic activity, achieving 96% methylene blue (MB) degradation within 120 min. Enhanced performance is attributed to the synergistic effect of Ag-induced plasmonic excitation and CNC-facilitated charge migration, effectively suppressing ZnO photocorrosion. Moreover, the optimization of the parameters was conducted and found to be pH 7, a catalyst dose of 0.3 g L⁻¹, and an initial MB concentration of 10 ppm, which shows the best photocatalytic degradation reaction. The CNC/Ag–ZnO catalyst maintains 87% activity after five reuse cycles, showing good stability and reusability. The photostability of the CNC/Ag–ZnO catalyst was evaluated by ICP-MS, which measured Zn²⁺ concentration in the aqueous solution. Additionally, the degraded MB compounds were identified using GC-MS/MS analysis. This work highlights the potential of polymer-based biogenic supports for sustainable photocatalyst design and bridges polymer science with environmental remediation technology. Full article

Surface discharge-induced degradation poses a significant threat to the operational reliability of high-voltage insulation systems. This research investigates the dielectric endurance of polyester-based nanocomposites reinforced with seven distinct nano-additives: iron oxide (Fe₃O₄), copper oxide (CuO), titanium oxide (TiO₂), aluminum oxide (Al₂O₃), silicon dioxide (SiO₂), zinc borate (ZnB) and graphene oxide (GO). Specimens were fabricated at 0.5% and 0.75% weight concentrations and subjected to constant AC electrical stress of 4.5 kV at 50 Hz until failure using the first-plane tracking method. To accurately monitor the aging process, a sophisticated signal processing framework involving Hankel-matrix-enhanced Robust Principal Component Analysis (RPCA) was developed to extract high-frequency discharge features from captured leakage current signals. The degradation characteristics were quantified using various statistical metrics, including Kurtosis, RMS and Burst Discharge Index (BDI). Experimental findings demonstrate that the incorporation of nanoparticles significantly extends the time-to-failure compared to neat polyester, although the effectiveness is highly dependent on both additive type and concentration. At 0.5 wt.%, ZnB exhibited the superior performance in delaying carbonized track formation. However, at 0.75 wt.%, Al₂O₃ emerged as the most effective additive, achieving a maximum endurance time of 31.61 min. In contrast, certain additives like TiO₂ showed a performance decline at higher loadings, likely due to nanoparticle agglomeration. The Hankel-RPCA methodology successfully isolated discharge-specific signatures from background noise, establishing a strong correlation between signal features and material failure stages. This study confirms that the synergy between advanced nanomaterial modification and robust signal processing provides an effective diagnostic tool for monitoring insulation health, offering a vital pathway for the designing of high-performance dielectrics for real-world power system applications. Full article

Despite the growing adoption of Ti6Al4V-ELI made by Laser Powder Bed Fusion (LPBF) in tribologically demanding applications, the influence of hybrid nanoparticle additives on its lubrication behavior under starved contact conditions remains insufficiently explored. The tribological performance of Ti6Al4V was investigated under starved boundary-to-mixed lubrication conditions using engine oil modified with Ag-doped TiO₂ nanoparticles. Double-scan LPBF-fabricated discs were tested in a ball-on-disc configuration against AISI 52100 bearing steel using a TRB³ tribometer. Nanolubricants were prepared by dispersing TiO₂ and Ag–TiO₂ nanopowders with different Ag⁺/Ti⁴⁺ ratios (0.5%, 1.5%, and 2.5%) in SAE 10W-40 engine oil at a constant nanoparticle concentration of 0.05 wt%. Comprehensive physicochemical characterization of the nanopowders and nanolubricants was performed through structural, chemical, optical, morphological, rheological, and stability analyses. Tribological experiments were conducted following a full-factorial design combining three normal loads (5–15 N), three sliding speeds (0.10–0.20 m·s⁻¹), and four lubricant formulations. The steady-state coefficient of friction ranged between 0.281 and 0.359, while the specific wear rate varied from 2.81 × 10⁻⁴ to 4.83 × 10⁻⁴ mm³·N⁻¹·m⁻¹. The contact temperature rise remained relatively moderate, within the interval of 1.9–9.4 °C. Among the investigated formulations, the lubricant containing 1.5% Ag–TiO₂ exhibited the lowest friction coefficient, whereas the formulation with the highest Ag content showed improved stability of tribological performance across the investigated operating domain. These results indicate that Ag-modified TiO₂ nanoparticles are consistent with the formation of protective tribofilms and contribute to the stabilization of friction, wear, and thermal behavior under starved lubrication conditions. ANOVA confirmed that sliding speed and the load–lubricant interaction are the dominant factors governing friction and wear, while normal load controls the thermal response. These findings support the use of Ag–TiO₂ nanolubricants as a viable strategy for stabilizing interfacial behavior in LPBF-fabricated titanium components operating under starved lubrication conditions. Full article

Zinc oxide (ZnO) is a semiconductor with photocatalytic activity, although it presents limitations due to its band gap and the rapid recombination of the electron–hole pair; therefore, strategies such as doping have been explored. In this work, ZnO nanoparticles doped with 3% and 5% silver (Ag) were synthesized using a Cylindropuntia cholla root extract as a reducing and stabilizing agent. The structural, chemical, and optical properties of the synthesized nanoparticles were investigated using Fourier Transform Infrared Spectroscopy (FT-IR), X-ray Diffraction (XRD), Cathodoluminescence (CL), X-ray Photoelectron Spectroscopy (XPS), and Energy-Dispersive X-ray Spectroscopy (EDS). FT-IR shows that the nanoparticles have peaks between 400 cm⁻¹ and 406 cm⁻¹, attributed to the Zn–O bond. XRD characterization confirmed the formation of the wurtzite crystalline phase of ZnO, as well as the cubic phase of Ag. CL reveals two peaks: one attributed to the ultraviolet (UV) region and another in the visible region, which is associated with defects in the lattice. XPS and EDS confirm the presence of Zn, O, and Ag in the samples. The degradation of methylene blue was 90.9%, 96.4%, and 97.0% for ZnO, 3AgZnO, and 5AgZnO, respectively, demonstrating an improvement in dye degradation efficiency when doping ZnO nanoparticles with Ag. Full article

Nanosomes—lipid vesicles at the nanoscale—enable the encapsulation of both hydrophilic and lipophilic actives and are increasingly used as skin delivery systems in cosmetic products. Alongside nanoemulsions, polymer nanocapsules, and inorganic nanoparticles (e.g., TiO₂, ZnO, Ag), they can enhance solubility, stability, residence time, and local bioavailability while enabling controlled release. This review summarizes nanocarrier structures, preparation concepts, and skin penetration pathways (transepidermal intercellular/transcellular and transappendageal), and discusses formulation factors that modulate delivery. We highlight applications in UV protection, anti-aging, and fragrance retention, focusing on lipid-based systems (liposomes/nanosomes, ethosomes, niosomes). Safety considerations are critically appraised with reference to EU and FDA frameworks, including physicochemical characterization, dermal penetration, irritation/sensitization, and genotoxicity testing. While most data indicate limited penetration through intact skin for particles ≥20 nm, enhanced uptake may occur under specific conditions (very small size, barrier impairment, mechanical stress), warranting careful risk assessment. We conclude with regulatory and sustainability perspectives and outline research priorities for long-term toxicology, in-use exposure, and standardization of methods. Full article

Contamination of water resources by organic pollutants is a major environmental issue. Utilizing photocatalytic materials for the degradation of these pollutants presents a viable strategy for environmental clean-up. This study introduces the synthesis of an organic/inorganic hybrid photocatalyst of β-cyclodextrin (β-CD)/reduced graphene oxide (rGO) and titanium oxide (TiO₂) nanoparticles. The nanocomposite was characterized by using FT-IR, XRD, SEM, and EDAX, and the photocatalytic activity was studied by measuring the photodegradation of methylene blue (MB) under simulated solar radiation. The synthesized nanocomposite showed excellent stability and performance, with up to 92% photodegradation of MB. To further enhance the photocatalytic activity, the synthesized nanocomposite underwent modification with Ag and Pt nanoparticles. Within 90 min, photodegradation rates of 100% and 97% for MB were attained with Pt and Ag nanoparticles that were loaded at 5 wt.%, respectively. The photocatalyst’s reusability was evaluated through multiple usage cycles. Additionally, the impact of functionalization on the band gap alteration of TiO₂ is reported. Full article

Zinc oxide (ZnO), silver (Ag) and titanium dioxide (TiO₂) nanoparticles (NPs), are three of the most widely manufactured NPs, while composite NPs have gained popularity due to their enhanced properties. NP release in environmental matrices increases chances of bioavailability and subsequent impact on human health. The current study focuses on manufacturing, characterization and cyto-genotoxic assessment of Ag, ZnO/Ag, TiO₂ and TiO₂/Ag NPs with and without humic acids (HAs), aiming for a holistic approach that leads to a comprehensive profile of said NPs. It entails (a) the synthesis of the aforementioned NPs via single-nozzle Flame Spray Pyrolysis (SN-FSP); (b) the characterization of NPs (in powder form and in dispersion media) using Powder X-ray Diffraction (PXRD), Transmission Electron Microscopy (TEM) and Dynamic Light Scattering (DLS); and (c) the assessment of their genotoxicity and cytotoxicity against human lymphocytes in presence of two HAs, thus simulating actual environmental conditions, and without HAs, through the cytokinesis block micronucleus assay (CBMN) with cytochalasin-B. No genotoxicity was observed in any case, whereas cytotoxicity induction varied depending on the NP and the presence or absence of the two HAs. Therefore, it is indispensable to evaluate the toxic profile of NPs considering different environmental scenarios, while conducting an integrated characterization of NPs. Full article

Although teixobactin, a promising cyclic undecadepsipeptide, exhibits efficacy against Gram-positive bacteria due to its novel mode of action and low potential for resistance, its clinical application is limited by two key shortcomings: ineffectiveness against Gram-negative bacteria and poor penetration of the protective extracellular polymeric substance (EPS) in biofilms. This renders it unsuitable for targeting the polymicrobial biofilms, which are the cause of periodontitis and peri-implantitis. We designed a modified teixobactin analog by integrating rhamnolipid, Ag@Fe₃O₄ nanoparticles, and _L-Chg₁₀-teixobactin to obtain a novel magnetic nanoparticle (MNP). The MNP demonstrates the ability to simultaneously degrade EPS, penetrate biofilm structures, and eliminate both G⁺ and G⁻ pathogens under a rotating magnetic field (RMF). Rhamnolipid grafting degraded 52.5% of biofilm EPS. MNPs showed broad-spectrum antimicrobial activity, with minimal inhibitory concentrations from 100 to 200 µg/mL. Combined with RMF, biofilm eradication rates reached 97.0% (E. faecalis), 97.7% (S. gordonii), 88.4% (P. gingivalis), and 74.2% (F. nucleatum). The biofilm thickness was reduced from 19.4 ± 2.9 µm to 7.4 ± 1.0 µm, and the biofilm biomass was reduced by 68.5%. This combined strategy integrates enzymatic EPS degradation, magneto-mechanical disruption, and dual antimicrobial action, offering a promising topical therapy for periodontitis and peri-implantitis. Full article

Naked oat (Avena nuda L.) is an important dual-purpose crop for grain and forage in cold regions; however, its high fatty acid content renders seeds prone to deterioration during storage. This study aimed to investigate the protective effects of zinc oxide nanoparticles (ZnO NPs) on artificially aged naked oat seeds and elucidate the underlying molecular mechanisms. Non-aged seeds (Naged) were subjected to artificial aging at 45 °C and 100% relative humidity for 24 h (Aged), followed by priming with 30 mg L⁻¹ ZnO NPs for 6 h (Daged). Antioxidant enzyme activities were determined spectrophotometrically, and transcriptome sequencing was performed on an Illumina platform to identify differentially expressed genes (DEGs) and enriched pathways. We found that ZnO NPs increased catalase (CAT), peroxidase (POD) and superoxide dismutase (SOD) activities by 3–4-fold, restored germination rate from 75% to 98%, and enhanced seed vigor index. A total of 21,403 DEGs were detected, with 15,841 stably expressed in response to nano-priming. Reactive oxygen species (ROS) burst rapidly induced up-regulation of AP2/EREBP transcription factor family members, which subsequently activated antioxidant enzyme genes to maintain cellular redox homeostasis. Metabolic pathway analysis demonstrated that the phenylpropanoid pathway was reprogrammed, characterized by down-regulated lignin biosynthesis and up-regulated flavonoid production, thereby enhancing ROS scavenging capacity. Additionally, the pentose phosphate pathway was activated to provide additional NADPH for antioxidant defense, and up-regulated ADP-glucose pyrophosphorylase (AGPase) facilitated starch accumulation. Notably, the 40S ribosomal protein S13 exhibited the highest connectivity in protein–protein interaction networks, was up-regulated 2.1-fold, and was enriched in post-translational modification processes. These findings suggest that nano-priming with ZnO NPs represents a promising biotechnological strategy for enhancing seed vigor and storability in naked oat, with potential applications in sustainable agriculture and the seed industry. Full article

The use of nanoparticles (NPs) synthesized from plant extracts is an alternative to conventional pesticides for the control of agricultural pests. This study aimed to optimize the conditions of synthesis of silver–zinc nanoparticles (Ag-ZnNPs) using extracts of Ocimum basilicum L. and Crotalaria longirostrata Hook. & Arn. and to evaluate their phytotoxic impact on maize seedlings. The Ag-ZnNPs (Ag-Zn nanoparticles) were synthesized by redox reaction between metal ions and reducing metabolites present in the extracts. A response surface methodology (RSM) with three factors (extract concentration, heating time and pressure) was applied to determine the optimal synthesis conditions. The phytotoxicity of nanoparticles (NPs) on maize seedlings was subsequently evaluated on root growth, oxidative stress enzymes (CAT, POD, and APX), and physiology of seedlings. Nanoparticles synthesized from C. longirostrata extract demonstrated superior properties, with an optimization of synthesis (R² = 95.3%) where the extract concentration (1:4 v/v; p < 0.01) was the critical factor influencing the reduction of metallic ions to nanoparticles. These NPs exhibited superior stability, smaller size (<100 nm), and zeta potential greater than 30 mV compared with O. basilicum extracts. Their NPs exhibited poorer optimization of synthesis (R² = 43.8%) without the effect of any of the variables evaluated. Essentially, C. longirostrata NPs showed no phytotoxic effects on maize seedlings’ physiological parameters and enhanced root growth (117.2 mm) without negatively affecting photosynthesis (PSII 70-81 FvFm). Ag-ZnNPs synthesized with C. longirostrata exhibited optimal stability and size, along with no observed possible phytotoxicity effects, unlike O. basilicum NPs, which cause stress on maize seedlings. Therefore, Crotalaria longirostrata NPs could represent a promising material for agricultural pest control, with no apparent adverse effect on maize crops. Full article

Pesticides are a major cause of water contamination, making this issue a major environmental and public health concern. In this context, the development of advanced and effective remediation materials is needed. In this study, a titanium-functionalized magnetic silica aerogel (AG-Ti@Fe₃O₄-SA) was successfully prepared via microfluidics and evaluated for water decontamination. The structural and compositional features of the aerogel were determined using XRD, FT-IR, RAMAN, SEM, TEM, BET, and DLS, confirming the formation of the aerogel with dispersed Fe₃O₄-SA nanoparticles and the successful incorporation of titanium within the aerogel matrix. Regarding decontamination potential, the aerogel was tested against a pesticide mixture, yielding pesticide-dependent removal efficiencies (16–100%). Notably, the aerogel exhibited a high affinity for organophosphorus pesticides and a moderate affinity for polar compounds, whereas bulky hydrophobic pesticides showed lower adsorption. In vitro, the aerogel induced a moderate decrease in HaCaT cell viability after 48 h of exposure, accompanied by a slight increase in lactate dehydrogenase release, while HEK293 cells remained largely unaffected, indicating a cell-type-dependent biological response. Overall, the findings from this screening-level study recommend AG-Ti@Fe₃O₄-SA aerogel as a promising selective adsorbent for pesticide removal. Full article

Background: Viral infections represent a major challenge in modern medicine, including diseases caused by human papillomavirus (HPV), cytomegalovirus (CMV), and rotavirus, which are among the most prevalent viral pathogens. The rapid transmission and high mutation rates of these viruses contribute to substantial health burdens and socio economic consequences. Silver nanoparticles (Ag NPs) and titanium dioxide nanoparticles (TiO₂-NPs) are effective antiviral agents. The major objective of this investigation was to measure the antiviral activity of titanium dioxide nanoparticles (TiO₂-NPs) and green-produced silver nanoparticles (Ag NPs) against rotavirus, HPV, and CMV. Methods: UV-Vis spectroscopy, transmission electron microscopy (TEM), Fourier transform infrared (FTIR) spectroscopy, and X-ray diffraction (XRD) were used to characterize the nanoparticles. Cytotoxicity and antiviral activity were evaluated using a crystal violet assay in infected cell cultures. Results: The main findings indicate that both Ag NPs and TiO₂-NPs exhibited pronounced antiviral activity against HPV, CMV, and rotavirus. Ag NPs exhibited strong antiviral activity, with lower IC₅₀ values against HPV and CMV; however, this effect was associated with lower cytotoxic concentration (CC₅₀) and selectivity index (SI) values, indicating higher cytotoxicity. In contrast, TiO₂-NPs demonstrated a favorable safety profile, as indicated by higher CC₅₀ value particularly against CMV (863.90 µg/mL) and rotavirus (386.84 µg/mL)—and low cytotoxicity toward host cells—highlighting their strong antiviral selectivity and therapeutic potential. Conclusions: Overall, these findings suggest that, while Ag-NPs possess strong antiviral efficacy, TiO₂ NPs offer a more balanced combination of antiviral effectiveness and biosafety and may therefore be more promising candidates for antiviral applications. Full article