Search Results (75)

The severity of cardiovascular disease is linked to C-reactive protein, interleukin 6, and C-type natriuretic peptide levels, stressing the need for a sensitive sensor that can detect these biomarkers at ultralow levels in real time. Whole blood samples from confirmed cardiovascular patients were analyzed for C-type natriuretic peptide, C-reactive protein, and interleukin 6 using three stochastic sensors. These sensors were designed using carbon paste matrices decorated with Ag nanoparticles (AgNPs), on which different phthalocyanines were physically immobilized. The sensors exhibited exceptionally low detection limits (1 × 10⁻²¹ g mL⁻¹) and broad linear concentration ranges (1 × 10⁻²¹ to 1 × 10⁻⁶ g mL⁻¹). The analysis conducted using the Student t-test indicated that there is no statistically significant difference between the results obtained from the three stochastic sensors used in the screening tests of whole blood, with ELISA at a confidence level of 99%. Full article

Posidonia oceanica (L.) Delile, an endemic seagrass of the Mediterranean Sea, has been increasingly recognized not only for its ecological significance but also for its potential as a source of bioactive compounds in human health. Over the past decade, scientific studies have identified diverse constituents of P. oceanica, including polyphenols, peptides, and polysaccharides, which exhibit antioxidant, anti-inflammatory, cytotoxic, and metabolic regulatory activities. Evidence from in vitro and in vivo models demonstrates its ability to influence key cellular processes such as apoptosis, autophagy, and enzyme inhibition, suggesting therapeutic promise in cancer, skin aging, inflammatory conditions, and metabolic disorders like type 2 diabetes. Recent advances in delivery technologies, such as nanoparticles, micelles, and liposomes, have improved the stability and bioavailability of P. oceanica extracts, enhancing their potential application in pharmaceuticals and cosmeceuticals. Additionally, its antimicrobial and antibiofilm properties suggest applications in food preservation and infection control. By bridging traditional uses with modern scientific validation, P. oceanica exemplifies the emerging potential of marine phytotherapy. As interest grows in nature-derived therapeutics, further research is essential to translate these preclinical findings into clinical applications while ensuring sustainable management and the conservation of this valuable marine resource. Full article

Dye-sensitized solar cells (DSSCs) are considered a prospective alternative to silicon-based solar cells due to their lower production cost and simpler fabrication process than conventional solar cells. DSSCs’ adjustable optical properties enable them to function effectively under diverse illumination conditions, making them ideal for powering small electronic devices in indoor environments. In DSSCs, silver nanoparticles (AgNPs) are incorporated into titanium dioxide (TiO₂) photoanodes due to their localized surface plasmon resonance (LSPR) effect, which enhances scattering and absorbing incident light and creates a strong electromagnetic field near the surface. There are diverse manufacturing methods for DSSCs, while the screen printing method is preferred because the area of the TiO₂ film can be easily customized to effectively reduce human error and make the film highly stable. In this study, eight different stacked DSSC film structures were fabricated by adding AgNPs to TiO₂ films. The TiO₂ paste with a concentration of 3 mwt% (percentage by mass) of AgNPs performed best in this study. The photovoltaic performance was evaluated using power conversion efficiency (PCE), and the results showed that the AgNP-doped film on the surface of the fluorine-doped tin oxide (FTO) glass significantly improved the photovoltaic performance. The three layers of TiO₂ doped with AgNPs achieved the highest PCE. PCE was increased since the TiO₂ film containing AgNPs became thicker and closer to the FTO substrate. The PCE of DSSCs was compared using pure TiO₂ NPs and the AgNP-doped TiO₂ photoanode. The efficiency increased from 5.67% to a maximum of 6.13%. This enhanced efficiency, driven by LSPR and improved electron transport, confirms the viability of screen-printed, plasmon-enhanced photoanodes for high-efficiency DSSCs. Full article

This study aimed to assess the biocompatibility and bioactivity of three different silver nanoparticles (AgNPs) and calcium hydroxide [Ca(OH)₂] mixtures against human dental pulp stem cells (hDPSCs). hDPSCs were treated with one of the following medicaments: 2 nm mixture, 5 nm mixture, 10 nm mixture, Ca(OH)₂ alone, and triple antibiotic paste (TAP). Cell viability was evaluated using the Cell Counting Kit-8 and LIVE/DEAD Viability/Cytotoxicity Kit. Reactive oxygen species (ROS) were quantified using the 2′,7′-dichlorofluorescein diacetate redox probe. Transforming growth factor (TGF)-β1, interleukin (IL)-1β, tumor necrosis factor (TNF)-α>, and alkaline phosphatase (ALP) were quantified using enzyme-linked immunosorbent assays. Mineralization was assessed using Alizarin Red S staining. Data were compared across groups using the Kruskal–Wallis test and within groups using the Wilcoxon signed-rank test (p < 0.05). Ca(OH)₂ alone and the 10 nm mixture demonstrated the highest cell viability and lowest ROS release (p < 0.05), while the 2 nm and 5 nm mixtures resulted in decreased viability and significant morphological distortion of the cells. Ca(OH)₂ alone and the 10 nm mixture comparably demonstrated the highest production of anti-inflammatory cytokine TGF-β1 (p < 0.05), the lowest production of proinflammatory cytokines IL-1β and TNF-α (p < 0.05), and the highest ALP release and mineralization (p < 0.05). Within the limitations of this in vitro study, Ca(OH)₂ alone and the 10 nm mixture improved hDPSCs’ viability, proliferation, differentiation, and mineralization. Both illustrated a significantly higher anti-inflammatory response by the residing stem cell population. Full article

This study presents a compact, wideband fractal antenna fabricated using silver nanoparticles (AgNPs) and screen-printing technology. The antenna consists of a decagonal monopole patch and a mesh ground plane, both printed on a transparent polyethylene terephthalate (PET) substrate. The proposed antenna has a compact size of 18 × 16 × 0.55 mm³, achieved by stacking two PET layers joined using double-sided tape. The antenna covers both C- and X-bands, with measured optical transmittance of 68.1% and radiation efficiency of 72%. The simulated −10 dB bandwidth (without bending) spans 4–10.8 GHz and 11.2–12.5 GHz, while the measured −10 dB bandwidth is 3.8–11.2 GHz without bending, 3–11.4 GHz at 30° bending, and 3–11.2 GHz at 45° bending, confirming that there was stable performance under flexure. The conductive patterns were formed using silver nanoparticle paste with a sheet resistance of 0.2 Ω/sq, followed by annealing in a vacuum oven at 140 °C for 20 min. The proposed antenna was tested under 30° and 45° bending, and the measured S₁₁ remained stable, confirming flexibility. The use of a flexible, optically transparent PET substrate enables installation on curved or see-through surfaces. Combining compact size, wideband performance, cost-effective fabrication, and optical transparency, the antenna demonstrates strong potential for application in X-band radar, C-band satellite communications, and S-band Wi-Fi. Full article

Background/Objectives. This manuscript presents an overview of advances in oncological radiotherapy as an effective treatment method for cancerous tumors, focusing on mechanisms of action within metabolite–antimetabolite systems. The urgency of this topic is underscored by the fact that cancer remains one of the leading causes of death worldwide: as of 2022, approximately 20 million new cases were diagnosed globally, accounting for about 0.25% of the total population. Given prognostic models predicting a steady increase in cancer incidence to 35 million cases by 2050, there is an urgent need for the latest developments in physics, chemistry, molecular biology, pharmacy, and strict adherence to oncological vigilance. The purpose of this work is to demonstrate the relationship between the nature and mechanisms of past diagnostic and therapeutic oncology approaches, their current improvements, and future prospects. Particular emphasis is placed on isotope technologies in the production of therapeutic nuclides, focusing on the mechanisms of formation of simple and complex theranostic compounds and their classification according to target specificity. Methods. The methodology involved searching, selecting, and analyzing information from PubMed, Scopus, and Web of Science databases, as well as from available official online sources over the past 20 years. The search was structured around the structure–mechanism–effect relationship of active pharmaceutical ingredients (APIs). The manuscript, including graphic materials, was prepared using a narrative synthesis method. Results. The results present a sequential analysis of materials related to isotope technology, particularly nucleus stability and instability. An explanation of theranostic principles enabled a detailed description of the action mechanisms of radiopharmaceuticals on various receptors within the metabolite–antimetabolite system using specific drug models. Attention is also given to radioactive nanotheranostics, exemplified by the mechanisms of action of radioactive nanoparticles such as Tc-99m, AuNPs, wwAgNPs, FeNPs, and others. Conclusions. Radiotheranostics, which combines the diagnostic properties of unstable nuclei with therapeutic effects, serves as an effective adjunctive and/or independent method for treating cancer patients. Despite the emergence of resistance to both chemotherapy and radiotherapy, existing nuclide resources provide protection against subsequent tumor metastasis. However, given the unfavorable cancer incidence prognosis over the next 25 years, the development of “preventive” drugs is recommended. Progress in this area will be facilitated by modern medical knowledge and a deeper understanding of ligand–receptor interactions to trigger apoptosis in rapidly proliferating cells. Full article

A simple and easily applicable analytical method for the simultaneous determination of Cd²⁺, Pb²⁺, Zn²⁺, Cu^2+, and Cl⁻ by applying a modified carbon paste electrode with saffron-conjugated silver nanoparticles (AgNPs@Sa) is being presented. The modified CPE was then used for the simultaneous determination of Cd²⁺, Pb²⁺, Zn²⁺, and Cu²⁺ as well as chloride ions in soil and plants. The comparative analysis demonstrated a significant enhancement in the applicability of the modified electrode through the incorporation of silver nanoparticles (AgNPs) at the carbon paste electrode (CPE) surface, leading to the development of a poly-Sa-CPE. This newly proposed method offers notably superior qualitative performance compared to other metal nanoparticle-based modifications reported in the literature. The accordingly modified electrode was successfully applied in the development of a chloride ion. A novel sensor is being proposed that makes possible the determination of heavy metals and chlorides in the same solution, in soil and plant samples. The enhanced sensitivity and selectivity of the poly-Sa-CPE system highlights its potential as a more effective alternative for heavy metal and chloride analysis, further demonstrating its advantages in electrochemical applications. The LODs of Cd²⁺, Pb²⁺, Zn^2+, Cu²⁺, and Cl⁻ for their simultaneous determination are 0.38 μg·L⁻¹, 0.44 μg·L⁻¹, 0.72 μg·L⁻¹, 0.42 μg·L⁻¹, and 0.11 μg·L⁻¹, respectively, with comparably high relative standard deviations of about 8.1%, 9.4%, 8.3%, 7.6%, and 7.9%, respectively. Full article

Nanotechnology is an evolving field that presents extensive opportunities in antimicrobial and eco-friendly food packaging applications. Silver nanoparticles (AgNPs) are particularly valuable in this context due to their outstanding physicochemical properties and demonstrated biological and antimicrobial efficacy, rendering them highly effective in food packaging applications. Historically, nanoparticle synthesis has largely relied on synthetic chemicals and physical methods; however, growing awareness of their potential toxic impacts on human health and the environment has led researchers to reassess these conventional approaches. In response, green synthesis using plants or their metabolites to produce nanoparticles (NPs) has emerged as a focal point in recent research. This approach provides significant advantages, notably in reducing toxicity associated with traditionally synthesized nanoparticles. Silver, recognized for its non-toxic, safe profile as an inorganic antibacterial and antifungal agent, has been employed for centuries and exhibits remarkable potential in various biological applications in its nanoparticle form. Environmentally friendly synthesis techniques are increasingly prioritized within chemical sciences to reduce the harmful byproducts of reactions. Green synthesis methods also offer economic benefits due to their lower costs and the abundant availability of natural raw materials. In the past five years, concerted efforts have been made to develop new, sustainable, and cost-effective methodologies for nanoparticle synthesis. This review explains the green synthesis of silver nanoparticles from different sources along with their quantification techniques and application in food packaging. Full article

Silver nanoparticle-coated multi-walled carbon nanotube (Ag/MWNT) composites were prepared using a chemical plating method that effectively controls the overgrowth of silver nanoparticles, ensuring uniform particle size. Functionalization of the carbon nanotube surface with numerous functional groups facilitates the binding of silver ions to multi-walled carbon nanotubes (MWNTs). This process results in Ag/MWNT composites with a uniform distribution of silver nanoparticles, prepared through reduction via the silver mirror reaction. The impact of dispersants and reducing agents on the silver coating of carbon nanotubes was studied. The results revealed the formation of negatively charged functional groups (-COOH, -OH, -C=O, and -NH2) on the nanotube surface. These groups acted as nucleation sites for the formation of silver nanoparticles. These groups acted as nucleation sites for the formation of silver nanoparticles. Simultaneously, the Ag/MWNT composites demonstrated effective dispersion within the matrix, improving the electrical conductivity of the electronic paste by 32.1% and 33.1%. This improvement was attributed to the forming of a conductive pathway within the silver-modified composite. Ag/MWNT composites within the paste system improved interfacial contact between fillers and the matrix, enhancing their potential applications in thermal interface materials. Full article

This study investigated the effects of TiO₂ nanoparticles (TNPs) on the hydration and microstructure of cement. The primary experimental variable was the TNP content, which ranged from 0 to 10 wt% of the cement. Cement paste and mortar specimens incorporating TNPs were prepared to assess the hydration characteristics, microstructure, and mechanical properties of the cement composites. Hydration characteristics were evaluated using heat of hydration, setting time, and thermogravimetric (TG) analysis. The microstructure was assessed through mercury intrusion porosimetry (MIP). The results indicated that TNPs accelerated the hydration of cement and modified the matrix microstructure, decreasing porosity and improving early-age strength. However, their tendency to agglomerate makes proper dispersion crucial for their effective application in construction materials. Therefore, when developing new building materials incorporating TNPs, it is essential to consider the properties of the nanoparticles and their physical and chemical effects on cement. Full article

Nitrobenzene (NB) is one of the nitro-aromatic compounds that is extensively used in various chemical industries. Despite its potential applications, NB is considered to be a toxic compound that has significant hazardous effects on human health and the environment. Thus, it can be said that the NB level should be monitored to avoid its negative impacts on human health. In this vein, the electrochemical method has emerged as one of the most efficient sensing techniques for the determination of NB. The sensing performance of the electrochemical techniques depends on the electro-catalytic properties and conductivity of the electrode materials. In the past few years, various electrode materials, such as conductive metal ions, semiconducting metal oxides, metal–organic frameworks, and two-dimensional (2D) materials, have been used as the electrode material for the construction of the NB sensor. Thus, it is worth summarizing previous studies on the design and synthesis of electrode materials for the construction of the NB sensor. In this mini-review article, we summarize the previous reports on the synthesis of various advanced electrode materials, such as platinum (Pt) nanoparticles (NPs), silver (Ag) NPs, carbon dots (CDs), graphene, graphitic carbon nitride (g-C₃N₄), zinc stannate (ZnSnO₃), cerium oxide (CeO₂), zinc oxide (ZnO), and so on. Furthermore, the impacts of different electrode materials are systematically discussed for the sensing of NB. The advantages of, limitations of, and future perspectives on the construction of NB sensors are discussed. The aim of the present mini-review article is to enhance the knowledge and overall literature, working towards the construction of NB sensors. Full article

The dehydrocoupling reaction between alcohols and hydrosilanes is considered to be one of the most atom-economical ways to produce Si–O coupling compounds because its byproduct is only hydrogen (H₂), which make it extremely environmentally friendly. In past decades, various kinds of homogeneous catalysts for the dehydrocoupling of alcohols and hydrosilanes, such as transition metal complexes, alkaline earth metals, alkali metals, and noble metal complexes, have been reported for their good activity and selectivity. Nevertheless, the practical applications of these catalysts still remain unsatisfactory, which is mainly restricted by environmental impact and non-reusability. A facile and recyclable heterogeneous catalyst, ultra-small Ag nanoparticles supported on porous carbon (Ag/C) for the etherification of silanes, has been developed. It has high catalytic activity for the Si–O coupling reaction, and the apparent activation energy of the reaction is about 30 kJ/mol. The ultra-small Ag nanoparticles dispersed in the catalyst through the carrier C have an enrichment effect on all reactants, which makes the reactants reach the adsorption saturation state on the surface of Ag nanoparticles, thus accelerating the coupling reaction process and verifying that the kinetics of the reaction of the catalyst indicate a zero-grade reaction. Full article

With the development of microelectronics products with high density and high power, it is urgent to improve the electrical and thermal conductivity of electronic paste to achieve the new requirements of packaging materials. In this work, a new synthesis method of Ag-MWCNTs was designed: Firstly, carboxylated MWCNTs and stannous chloride were used as raw materials to prepare high-loading-rate Sn-MWCNT composite material to ensure the high loading rate of metal on the MWCNT surface. Then, Ag-MWCNT composite material was prepared by the chemical displacement method to solve the problem of the low loading rate of silver nanoparticles on the MWCNT surface. On the basis of this innovation, we analyzed and compared the electrical, thermal, and mechanical properties of Ag-MWCNT composite electronic paste. Compared with the electronic paste without adding Ag-MWCNTs, the resistivity was reduced by 77%, the thermal conductivity was increased by 66%, and the shear strength was increased by 15%. Therefore, the addition of Ag-MWCNTs effectively improves the electrical, thermal, and mechanical properties of the paste, making it a promising and competitive choice for new packaging materials in the future. Full article

The wide array of structures and characteristics found in ZnO-based nanostructures offers them a versatile range of uses. Over the past decade, significant attention has been drawn to the possible applications of these materials in the biomedical field, owing to their distinctive electronic, optical, catalytic, and antimicrobial attributes, alongside their exceptional biocompatibility and surface chemistry. With environmental degradation and an aging population contributing to escalating healthcare needs and costs, particularly in developing nations, there’s a growing demand for more effective and affordable biomedical devices with innovative functionalities. This review delves into particular essential facets of different synthetic approaches (chemical and green) that contribute to the production of effective multifunctional nano-ZnO particles for biomedical applications. Outlining the conjugation of ZnO nanoparticles highlights the enhancement of biomedical capacity while lowering toxicity. Additionally, recent progress in the study of ZnO-based nano-biomaterials tailored for biomedical purposes is explored, including biosensing, bioimaging, tissue regeneration, drug delivery, as well as vaccines and immunotherapy. The final section focuses on nano-ZnO particles’ toxicity mechanism with special emphasis to their neurotoxic potential, as well as the primary toxicity pathways, providing an overall review of the up-to-date development and future perspectives of nano-ZnO particles in the biomedicine field. Full article

Recently, the production of new photocatalytic materials has attracted considerable attention as a promising strategy to mitigate anthropogenic environmental degradation. In this study, cement paste composites (water/cement ratio = 0.5) were prepared using a coating based on nanoparticles of SnO₂ (SnO₂/cement paste) and SnO₂ decorated with Ag₂O (Ag₂O-decorated SnO₂/cement paste) for photocatalytic applications. These coatings were prepared in this study by using the hydrothermal method as the strategy. Thus, photocatalyst efficiency was evaluated through the degradation of methylene blue (MB) and methyl red (MR) as cationic and anionic dyes, respectively, and the simultaneous degradation of MB/MR (1:1 v/v) dyes. Moreover, the photocatalytic mechanism was investigated in the presence of scavengers. Notably, an increase in pH in the range of 2–6 resulted in selective degradation of the MB/MR dye mixtures. Overall, the photocatalytic performance of these materials provides a novel platform technology focused on advanced civil engineering applications, which consequently facilitates the mitigation of various environmental problems. Full article