Search Results (120)

The report of the first room-temperature, ambient-pressure superconductivity in copper-doped lead apatite Pb_10−xCu_x(PO₄)₆O has attracted lots of attention. However, subsequent studies revealed the presence of numerous impurity phases in the polycrystalline sample, and the sharp superconducting-like transition is not due to a superconducting transition but most likely due to a reduction in resistivity caused by the first-order structural phase transition of Cu₂S at around 385 K from the β phase at high temperature to the γ phase at low temperature. Before now, only bulk measurements have been performed on a Pb_10−xCu_x(PO₄)₆O powder sample, which could be affected by the impurity phases, masking the intrinsic properties of Pb_10−xCu_x(PO₄)₆O. In this study, ³¹P and ^63/65Cu nuclear magnetic resonance (NMR) measurements have been performed on a Pb_10−xCu_x(PO₄)₆O powder sample to investigate its physical properties from a microscopic point of view. Our NMR data evidence the non-magnetic insulating nature of Pb_10−xCu_x(PO₄)₆O without any trace of electron correlation effects. Furthermore, the ^63/65Cu NMR results suggest that no copper or very little copper is substituted for Pb in Pb₁₀(PO₄)₆O prepared by sintering Pb₂SO₅ and Cu₃P. Full article

Salinomycin is a polyether ionophorous antibiotic with promising antineoplastic properties. Published studies have revealed that the compound also exerts pronounced antidotal activity against cadmium (Cd) and lead (Pb) intoxications. It has been proven that salinomycin with Cd(II) forms a coordination compound of a composition [Cd(C₄₂H₆₉O₁₁)₂(H₂O)₂] and an octahedral molecular geometry, while the coordination compound of the antibiotic with Pb(II) has a square pyramidal structure and composition [Pb(C₄₂H₆₉O₁₁)(NO₃)]. To date, there is no published information about the ability of salinomycin to form complexes with the mercury ion (Hg(II)). Herein, we report, for the first time, a synthetic procedure for a complex compound of salinomycin with Hg(II). The coordination compound was characterized by a variety of methods, such as elemental analysis, attenuated total reflectance–Fourier transform infrared spectroscopy (ATR-FTIR), electrospray ionization–mass spectrometry (ESI-MS), powder X-ray diffraction, nuclear magnetic resonance spectroscopy (NMR), thermogravimetry with differential thermal analysis (TG-DTA), and thermogravimetry with mass spectrometry (TG-MS). The elemental analysis data revealed that the new compound is of the chemical composition [Hg(C₄₂H₆₉O₁₁)(H₂O)(OH)]. Based on the results from the spectral analyses, the most probable structure of the complex was proposed. Full article

The interaction between cucurbit[8]uril (Q[8]) and the guest 1-methyl-4-(4-(1-methylpyridin-1-ium-4-yl)benzamido)pyridin-1-ium (PB²⁺) has been thoroughly investigated. Multiple techniques were employed, including ¹H NMR spectroscopy, mass spectrometry, isothermal titration calorimetry (ITC), UV–vis absorption spectrophotometry, and quantum chemistry calculations. The experimental results and calculation analysis have clearly shown that in aqueous solution, the host Q[8] preferentially encapsulates the phenylpyridinium salt moiety of the PB²⁺ guest within its hydrophobic cavity, forming a 1:2 inclusion complex. Full article

The full chemical shift tensor of ²⁰⁷Pb (spin $I=1/2$) in the natural mineral crocoite, PbCrO₄, has been determined using single-crystal NMR spectroscopy at room temperature. The eigenvalues of the tensor in its principal axes system are ${\delta }_{11}=-2720\pm 2$ ppm, ${\delta }_{22}=-2319\pm 4$ ppm, and ${\delta }_{33}=-1830\pm 5$ ppm, resulting in an isotropic chemical shift of ${\delta }_{\mathrm{iso}}=-2289\pm 2$ ppm. Additionally, these values were verified using a Herzfeld–Berger analysis of a polycrystalline sample under magic-angle spinning (MAS) conditions. Full article

The application of biochar to traditional soil and soilless growth media in agriculture has been reported to increase plant production. However, it remains unclear which biochar component drives this process or which biogeochemical process is attributed to better plant productivity. Therefore, this study aims to determine how biochar organic carbon (C) composition and thermal stability influence nitrogen availability and tomato production. Soilless growth media composed of a mixture of 60% and 40% coconut coir (CC) (Cocos nucifera L.) and fine pine bark (PB) (Pinus genus), respectively, was amended with 0, 1, 2, 3, 4, 6, 8, 10, and 12% biochar per dry weight. The amended media were used to grow Red Bounty tomatoes (Lycopersicum esculentum) for three months. After harvesting tomatoes and determining yield, organic C composition and C thermal stability of the biochar amended soilless growth media mixtures were determined using solid-state ¹³C nuclear magnetic resonance (¹³C NMR) and multi-elemental scanning thermal analysis (MESTA), respectively. Thermal stability data were used to determine the “R400 index”, and nitrate (NO₃⁻) concentration was determined using the water extractable method. Results showed that biochar-amended media significantly increased pH (p < 0.0001) and NO₃⁻ (p = 0.0386) compared to the no-char control. Biochar amended soilless media organic C composition was dominated by O-alkyl-C as a result of a higher fraction of soilless media; however, total C, carboxyl-C, phenolic-C, and aromatic-C increased with increasing biochar content and related negatively to R400, which decreased with increasing biochar content. Nitrate retention and tomato yield increased with increasing total C, carboxyl-C, phenolic-C, and aromatic-C and decreasing R400. This indicates that the stable form of C, carboxyl-C, phenolic-C, aromatic-C, and low R400 enhanced NO₃⁻ sorption, reducing leaching and enhancing its availability for tomato growth. Full article

This study investigates the functionalization of a poplar biochar (PB), obtained by high-temperature pyrolysis, under oxidative conditions typically used in organic synthesis. In particular, concentrated nitric acid, a sulfonitric mixture and a piranha mixture were applied as oxidants at different temperatures and reaction times. In order to assess the outcome of the reaction conditions on the characteristics of the resultant products, these were characterized by a combination of imaging (SEM), spectroscopic (ATR-FTIR, RAMAN) and FFC-NMR relaxometric techniques. The latter techniques, rationalized in terms of the Kohlrausch-type stretched exponential kinetic model, were analyzed using a recently developed heuristic Monte Carlo method, providing insights into the water dynamics within material pore networks. Additionally, the water-holding capacity of the modified biochars and their abilities to adsorb some model dyes were evaluated. The results clarify the relationship between oxidative treatment conditions and biochar properties, highlighting their impact on both structural modifications and water dynamics within the porous network, and enabling us to identify the best reaction conditions for optimizing the features of the oxidized product. Full article

Background/Objectives: Dithiocarbazates (DTCs) and their metal complexes have been studied regarding their property as anticancer activities. In this work, using S-benzyl-5-hydroxy-3-methyl-5-phenyl-4,5-dihydro-1H-pirazol-1-carbodithionate (H₂bdtc), we prepared [ReO(bdtc)(Hbdtc)] and [[^99mTc]TcO(bdtc)(Hbdtc)] complexes for tumor uptake and animal biodistribution studies. Methods: Re complex was prepared by a reaction of H2bdtc and (NBu₄)[ReOCl₄], the final product was characterized by IR, ¹H NMR, CHN, and MS-ESI. ^99mTc complex was prepared by the reaction of H2bdtc and [[^99mTc]TcO₄⁻ and analyzed by planar and HPLC radiochromatography, and the stability was evaluated against amino acids and plasma. Biodistribution was performed in C57B/6 mice with B16F10 and TM1M implanted tumor. Results: Re is asymmetric coordinated by two dithiocarbazate ligands, one with O,N,S chelation, and the other with N,S chelation; [[^99mTc]TcO(bdtc)(Hbdtc)] was prepared with a radiochemical yield of around 93%. The radioactive complex is hydrophobic (LogP = 1.03), stable for 6 h in PBS and L-histidine solution; stable for 1 h in plasma, but unstable in the presence of L-cysteine. Ex vivo biodistribution demonstrated that the compound has a fast and persistent (until 2 h) uptake by the spleen (55.46%), and tumor B16F10 and TM1M uptake is lower than 1%. In vivo SPECT/CT imaging confirmed ex vivo biodistribution, except by heterogenous TM1M accumulation but not in the B16-F10 lineage. Conclusions: H₂bdtc proved to be an interesting chelator for rhenium or [^99mTc]technetium. The right spleen uptake opened the opportunity to deepen the study of the molecule in this tissue and justifies future studies to identify the reason of heterogenous uptake in TM1M tumor uptake. Full article

A Black Hole Quencher-3 (BHQ-3) derivative was synthesized through an azo-coupling reaction between Methylene Violet 3RAX and a tertiary aniline functionalized with a pendant primary amine, allowing subsequent peptide conjugation. The synthesized compounds were characterized using NMR, UV–vis absorption, fluorescence spectroscopy, and mass spectrometry. The spectral properties of a Cy5/BHQ-3 amine pair were investigated through titration experiments in PBS (pH 7.4). The results confirmed Förster Resonance Energy Transfer (FRET), along with additional dynamic quenching, as evidenced by the Stern–Volmer analysis. The Stern–Volmer constant (K_SV) was determined to be 1.40 × 10⁵ M⁻¹. These findings confirm the potential of this system for use in molecular probes and bioimaging applications. Full article

We discussed and summarized the latest data from the global literature on the action of polyphenolic antioxidants and their metal complexes. The review also includes a summary of the outcomes of theoretical computations and our many years of experimental experience. We employed various methods, including spectroscopy (FT-IR, FT-Raman, NMR, UV/Vis), X-ray diffraction, thermal analysis, quantum calculations, and biological assays (DPPH, ABTS, FRAP, cytotoxicity, and genotoxicity tests). According to our research, the number and position of hydroxyl groups in aromatic rings, as well as the delocalization of electron charge and conjugated double bonds, have a major impact on the antioxidant effectiveness of the studied compounds. Another important factor is metal complexation, whereby high ionic potential metals (e.g., Fe(III), Cr(III), Cu(II)) enhance antioxidant properties by stabilizing electron charge, while the low ionic potential metals (e.g., Ag(I), Hg(II), Pb(II)) reduce efficacy by disrupting electron distribution. However, we observed no simple correlation between ionic potential and antioxidant capacity. This paper gives insights that will aid in identifying new, effective antioxidants, which are vital for nutrition and the prevention of neurodegenerative illnesses. Our results outline the connections between biological activity and molecular structure, offering a foundation for the methodical design of antioxidants. Our review also shows in detail how we use various complementary methods to assess the impact of metals on the electronic systems of ligands. This approach moves beyond the traditional “trial and error” method, allowing for the more efficient and rational development of future antioxidants. Full article

Background/Objectives: Magnetic Fe₃O₄ nanoparticles (MNPs) are becoming more important every day. We prepared MNPs in a simple one-step reaction by following the solvothermal method, assisted by azide and alkyne functionalized polyethylene glycol (PEG400) polymers, as well as by PEG6000 and the polyol β-cyclodextrin (βCD), which played a crucial role as electrostatic stabilizers, providing polymeric/polyol coatings around the magnetic cores. Methods: The composition, morphology, and magnetic properties of the nanospheres were analyzed using Transmission Electron and Atomic Force Microscopies (TEM, AFM), Nuclear Magnetic Resonance (NMR), X-ray Diffraction Diffractometry (XRD), Fourier-Transform Infrared Spectroscopy (FT-IR), Matrix-Assisted Laser Desorption/Ionization (MALDI) and Vibrating Sample Magnetometry (VSM). Results: The obtained nanoparticles (@Fe₃O₄-PEGs and @Fe₃O₄-βCD) showed diameters between 90 and 250 nm, depending on the polymer used and the Fe₃O₄·6H₂O precursor concentration, typically, 0.13 M at 200 °C and 24 h of reaction. MNPs exhibited superparamagnetism with high saturation mass magnetization at room temperature, reaching values of 59.9 emu/g (@Fe₃O₄-PEG6000), and no ferromagnetism. Likewise, they showed temperature elevation after applying an alternating magnetic field (AMF), obtaining Specific Absorption Rate (SAR) values of up to 51.87 ± 2.23 W/g for @Fe₃O₄-PEG6000. Additionally, the formed systems are susceptible to click chemistry, as was demonstrated in the case of the cannabidiol-propargyl derivative (CBD-Pro), which was synthesized and covalently attached to the azide functionalized surface of @Fe₃O₄-PEG400-N₃. Prepared MNPs are highly dispersible in water, PBS, and citrate buffer, remaining in suspension for over 2 weeks, and non-toxic in the T84 human colon cancer cell line, Conclusions: indicating that they are ideal candidates for biomedical applications. Full article

Using an endogenous carrier is the best method to address the biocompatibility of carriers in the drug delivery field. Herein, we prepared a glutathione-responsive paclitaxel prodrug micelle based on an endogenous molecule of L-glutathione oxidized (GSSG) for cancer therapy using one-pot synthesis. The carboxyl groups in L-glutathione oxidized were reacted with the hydroxyl group in paclitaxel (PTX) using the catalysts dicyclohexylcarbodiimide (DCC) and 4-dimethylaminopyridine (DMAP). Then, the amino-polyethylene glycol monomethyl ether (mPEG-NH₂) was conjugated with GSSG to prepare PTX-GSSG-PEG. The structure of PTX-GSSG-PEG was characterized using infrared spectroscopy (FT-IR), nuclear magnetic resonance spectroscopy (NMR), and mass spectrometry (MS). The drug release kinetics of PTX within PTX-GSSG-PEG were quantified using ultraviolet spectroscopy (UV-Vis). The size of the PTX-GSSG-PEG micelles was 83 nm, as evaluated using dynamic light scattering (DLS), and their particle size remained stable in a pH 7.4 PBS for 7 days. Moreover, the micelles could responsively degrade and release PTX in a reduced glutathione environment. The drug loading of PTX in PTX-GSSG-PEG was 13%, as determined using NMR. Furthermore, the cumulative drug release rate of PTX from the micelles reached 72.1% in a reduced glutathione environment of 5 mg/mL at 120 h. Cell viability experiments demonstrated that the PTX-GSSG-PEG micelles could induce the apoptosis of MCF-7 cells. Additionally, cell uptake showed that the micelles could distribute to the cell nuclei within 7 h. To sum up, with this glutathione-responsive paclitaxel prodrug micelle based on the endogenous molecule GSSG, it may be possible to develop novel nanomedicines in the future. Full article

A three-dimensional porous bacterial cellulose/graphene oxide (BC/GO) composite hydrogel (BC/GO) was synthesized with multi-layer graphene oxide (GO) as the modifier and bacterial cellulose as the skeleton via an ultrasonic shaking process to absorb lead ions effectively. The characteristics of BC/GO were investigated through TEM, SEM, FT-IR, NMR and Zeta potential experiments. Compared to bacterial cellulose, the ultrasonic method and the carboxyl groups stemming from GO helped to enhance the availability of O(3)H of BC, in addition to the looser three-dimensional structure and enriched oxygen-containing groups, leading to a significantly higher adsorption capacity for Pb(II). In this paper, the adsorption behavior of BC/GO is influenced by the GO concentration, adsorption time, and initial concentration. The highest adsorption capacity for Pb(II) on BC/GO found in this study was 224.5 mg/g. The findings implied that the pseudo-second-order model explained the BC/GO adsorption dynamics and that the data of its adsorption isotherm fit the Freundlich model. Because of the looser three-dimensional structure, the complexation of carboxyl groups, and the enhanced availability of O(3)H, bacterial cellulose exhibited a much better adsorption capacity. Full article

Driven by concerns over polluted industrial wastewater, particularly heavy metals and dyes, this study explores biosorption using chemically cross-link chitosan derivatives as a sustainable and cost-effective depollution method. Chitosan cross-linking employs either water-soluble polymers and agents like glutaraldehyde or copolymerization of hydrophilic monomers with a cross-linker. Chemical cross-linking of polymers has emerged as a promising approach to enhance the wet-strength properties of materials. The chitosan thus extracted, as powder or gel, was used to adsorb heavy metals (lead (Pb²⁺) and copper (Cu²⁺)) and dyes (methylene blue (MB) and crystal violet (CV)). Extensive analysis of the physicochemical properties of both the powder and hydrogel adsorbents was conducted using a range of analytical techniques, including Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), Brunauer–Emmett–Teller (BET), and scanning electron microscopy (SEM), as well as ¹H and ¹³C nuclear magnetic resonance (NMR). To gain a comprehensive understanding of the sorption process, the effect of contact time, pH, concentration, and temperature was investigated. The adsorption capacity of chitosan powder for Cu(II), Pb(II), methylene blue (MB), and crystal violet (CV) was subsequently determined as follows: 99, 75, 98, and 80%, respectively. In addition, the adsorption capacity of chitosan hydrogel for Cu(II), Pb(II), MB, and CV was as follows: 85, 95, 85, and 98%, respectively. The experimental data obtained were analyzed using the Langmuir, Freundlich, and Dubinin–Radushkevich isotherm models. The isotherm study revealed that the adsorption equilibrium is well fitted to the Freundlich isotherm (R² = 0.998), and the sorption capacity of both chitosan powder and hydrogel was found to be exceptionally high (approximately 98%) with the adsorbent favoring multilayer adsorption. Besides, Dubinin has given an indication that the sorption process was dominated by Van der Waals physical forces at all studied temperatures. Full article

This manuscript serves as the starting point for in-depth research of multicomponent, statistical, methacrylate-based copolymers that potentially mimic the behavior of proteins in aqueous solutions. These synthetic macromolecules are composed of specially chosen comonomers: methacrylic acid (MAA), oligoethylene glycol methyl ether methacrylate (OEGMA₄₇₅), 2-(dimethylamino)ethyl methacrylate (DMAEMA) and benzyl methacrylate (BzMA). Monomer choice was based on factors such as the chemical nature of pendant functional groups, the polyelectrolyte/polyampholyte and amphiphilic character and the overall hydrophobic–hydrophilic balance (HLB) of the obtained quaterpolymers. Their synthesis was achieved via a one-pot reversible addition fragmentation chain transfer (RAFT) polymerization in two distinct compositions and molecular architectures, linear and hyperbranched, respectively, in order to explore the effects of macromolecular topology. The resulting statistical quaterpolymers were characterized via ¹H-NMR and ATR-FTIR spectroscopies. Their behavior in aqueous solutions was studied by dynamic (DLS) and electrophoretic light scattering (ELS) and fluorescence spectroscopy (FS), producing vital information concerning their self-assembly and the structure of the formed aggregates. The physicochemical studies were extended by tuning parameters such as the solution pH and ionic strength. Finally, the quaterpolymer behavior in FBS/PBS solutions was investigated to test their colloid stability and biocompatibility in an in vivo-mimicking, biological fluid environment. Full article

Inorganic–organic hybrid biomaterials have been proposed for bone tissue repair, with improved mechanical flexibility compared with scaffolds fabricated from bioceramics. However, obtaining hybrids with osteoinductive properties equivalent to those of bioceramics is still a challenge. In this work, we present for the first time the synthesis of a class II hybrid modified with bioactive glass nanoparticles (nBGs) with osteoinductive properties. The nanocomposite hybrids were produced by incorporating nBGs in situ into a polytetrahydrofuran (PTHF) and silica (SiO₂) hybrid synthesis mixture using a combined sol–gel and cationic polymerization method. nBGs ~80 nm in size were synthesized using the sol–gel technique. The structure, composition, morphology, and mechanical properties of the resulting materials were characterized using ATR-FTIR, ²⁹Si MAS NMR, SEM-EDX, AFM, TGA, DSC, mechanical, and DMA testing. The in vitro bioactivity and degradability of the hybrids were assessed in simulated body fluid (SBF) and PBS, respectively. Cytocompatibility with mesenchymal stem cells was assessed using MTS and cell adhesion assays. Osteogenic differentiation was determined using the alkaline phosphatase activity (ALP), as well as the gene expression of Runx2 and Osterix markers. Hybrids loaded with 5, 10, and 15% of nBGs retained the mechanical flexibility of the PTHF–SiO₂ matrix and improved its ability to promote the formation of bone-like apatite in SBF. The nBGs did not impair cell viability, increased the ALP activity, and upregulated the expression of Runx2 and Osterix. These results demonstrate that nBGs are an effective osteoinductive nanoadditive for the production of class II hybrid materials with enhanced properties for bone tissue regeneration. Full article