Search Results (78)

The influence of 5-Methyl-1H-benzotriazole (MHBTZ) on the corrosion of pure iron (Fe) and aluminum (Al) in 1 M HCl was investigated in this study. The experimental and theoretical aspects of MHBTZ adsorption onto pure iron (Fe) and aluminum metal (Al) surfaces, as well as the stability of adsorbed layers based on the metal type, were also studied. Different electrochemical measurements were performed to explore the corrosion rates and inhibition efficiencies on the Fe and Al surfaces at 298 K. Optical profilometry was used to obtain the 3D surface topography of Fe and Al metals after immersion with and without the MHBTZ molecule. The results showed that MHBTZ exhibited excellent inhibition properties for both metals. Electrochemical impedance spectroscopy (EIS) achieved inhibition efficiencies of 98.1% and 98.5% for Fe and Al, respectively, at a concentration of 2500 ppm. Potentiodynamic polarization (PDP) indicated that MHBTZ acted as a mixed-type inhibitor. Density functional theory (DFT) analysis and molecular dynamics (MD) simulations were used to explore the relationship between the molecular structure of MHBTZ and its inhibition efficiency at the atomic level. Full article

This study presents evaluation of biochar derived from silkworm cocoons for the adsorption of organic and inorganic contaminants from rainwater. The material was characterised using BET surface area analysis, scanning electron microscopy (SEM), and the point of zero charge (pH_PZC). The prepared biochar exhibited a well-developed surface area and demonstrated adsorption capacity toward both heavy metals and benzotriazole. The model rainwater was prepared by spiking real rainwater samples with Cu(II), Ni(II), Zn(II) ions, and benzotriazole (BT). Adsorption experiments were carried out under laboratory conditions to evaluate the effects of contact time, pH, and sorbent dosage. The experimental data were fitted to pseudo-first-order and pseudo-second-order kinetic models, as well as Langmuir/and Freundlich isotherms. The results showed that the adsorption of Cu(II) followed the Langmuir/Freundlich model, while the adsorption of Ni(II) benzotriazole was more consistent with the Freundlich model. Adsorption kinetics were best described by the pseudo-second-order model. The highest removal efficiencies were observed for Cu(II) (96%) and Ni(II) (88.8%), while Zn(II) removal was limited. Benzotriazole was also effectively adsorbed (97%), rapid adsorption occurred mainly within the first minute. Overall, the study highlights the selective adsorption behaviour of silkworm cocoon biochar and provides a comparative insight into the removal of organic and inorganic pollutants using a waste-derived adsorbent with surface properties comparable to those of activated carbon. Full article

N-vinylindoles have attracted attention for their promising role in medicinal chemistry. Therefore, developing new synthetic methods that enable access to diverse functionalized N-vinylindoles with potential pharmacological properties is highly valuable. 1-[2-aryl-1-(4,5-dihydro-1H-imidazol-2-yl)vinyl]-1H-indoles 2a-i were prepared via Knoevenagel condensation promoted by 1H-benzotriazole, and characterized by IR, NMR, and MS spectroscopic data as well as a single-crystal X-ray diffraction-based study of the representative derivative 2g. The obtained compounds 2a-i were screened for their cytotoxic potency against human cancer cell lines (HeLa, SKOV-3, AGS) and non-cancerous cell line (HaCaT) using the MTT assay. Additional apoptosis analysis and cell cycle assay on SKOV-3 cells were conducted. Their antimicrobial activity was determined using reference strains of S. aureus, E. coli, C. albicans, and C. glabrata. The potent inhibitory activity against AGE2-BSA/sRAGE interaction of selected N-vinylindoles 2b, 2d-f, and 2h-i was evaluated by ELISA assay. A facile approach has been developed for the synthesis of a novel class of N-vinylindoles. The preliminary structure–activity considerations indicated that the presence of substituents R, such as 4-bromophenyl (compound 2f) or 2-naphthyl (compound 2i) is optimal for anticancer activity and the AGE2-BSA/sRAGE interaction inhibition. The most prominent (Z)-1-[1-(4,5-dihydro-1H-imidazol-2-yl)-2-(naphthalen-2-yl)vinyl]-1H-indole (2i) was found to strongly arrest cell cycle in the SKOV-3 cell line in the subG0 phase, inducing apoptosis. Notably, derivative 2i also exhibited the highest activity against S. aureus and C. albicans strains within the tested series. These findings highlight the substantial potential of N-vinylindole derivative 2i as a lead compound for the development of anticancer drugs with additional inhibitory activity on the AGE/RAGE interaction. Full article

Quinazolin-4(3H)-ones are nitrogen heterocycles that have attracted considerable interest over many years due to their important biological and pharmacological properties. It has been shown that quinazolinone derivatives exhibit, e.g., analgesic, anti-inflammatory, antibacterial, anticonvulsant, antifungal, and antitumor activities. Some of these compounds have found applications in medicine; for instance, Zydelig (Idelalisib) has been approved for the treatment of several types of blood cancers. Furthermore, the quinazolinone skeleton is an important structural moiety present in many naturally occurring alkaloids, such as Febrifugine, a potent anti-malarial agent. To date, numerous synthetic methods have been developed for the synthesis of quinazolinone derivatives. Among them, multicomponent reactions (MCRs) have emerged as a powerful tool, allowing for the rapid and straightforward construction of the quinazolinone scaffold from readily available substrates. This review article presents a concise overview of selected strategies for synthesizing quinazolinone frameworks via one-pot MCRs. The reported methods are categorized into three main groups: metal-catalyzed reactions; isatoic-anhydride-based strategies, utilizing isatoic anhydride as a key starting material, and alternative approaches involving, among others, the utilization of N-(2-aminobenzoyl)benzotriazoles or aryldiazonium salts as efficient building materials. Full article

This review supports formulation engineers in designing compatible and regulation-compliant additive systems. The integration of functional additives into polymer matrices plays a pivotal role in tailoring material properties to meet the demanding performance, safety, and sustainability criteria of the automotive industry. Key findings highlight that (1) optimal additive loadings are critical for balancing performance and mechanical integrity; (2) HALS and benzotriazole-based UV stabilizers extend service life by up to 3000 h in accelerated weathering without modulus loss; (3) bio-based plasticizers such as ESO and ATBC reduce migration rates by 30–40% compared to conventional phthalates; (4) phosphorus-based flame retardants and zinc borate synergistically achieve UL-94 V-0 ratings with minimal smoke release. This work introduces an integrative mapping of additive–polymer interactions under real-world conditions, coupled with synthesis tables that provide multi-criteria evaluations of performance, limitations, and sustainability—tools not present in prior literature. In contrast to previous reviews, this work introduces an integrative mapping of additive–polymer interactions under real-world automotive stressors, explicitly linking performance, compatibility, regulatory compliance, and sustainability. In addition, a series of synthesis consolidate multi-criteria evaluations—covering functional performance, technical limitations, regulatory risks, and sustainability potential—which provide practitioners with a decision-support tool not found in prior literature. These features constitute the primary methodological and practical contributions of this review. This review uniquely integrates an “evidence strength” assessment into synthesis tables and develops an integrative mapping of polymer–additive systems, offering actionable guidelines that go beyond prior literature reviews. Full article

The electrooxidation (EO) of three important environmental contaminants, anticorrosive 1H-benzotriazole (BTA), plasticizer dibutyl phthalate (DBP), and non-ionic surfactant Triton X-100 (tert-octylphenoxy[poly(ethoxy)] ethanol, t-OPPE), was studied as a possible means to improve their elimination from wastewaters, which are an important emission source. EO was performed in a batch reactor with a boron-doped diamond (BDD) anode and a stainless steel cathode. Different supporting electrolytes were tested: NaCl, H₂SO₄, and Na₂SO₄. Results were analysed from the point of their efficacy in terms of degradation rate, kinetics, energy consumption, and transformation products. The highest degradation rate, shortest half-life, and lowest energy consumption was observed in the electrolyte H₂SO₄, followed by Na₂SO₄ with only slightly less favourable characteristics. In both cases, degradation was probably due to the formation of persulphate or sulphate radicals. Transformation products (TPs) were studied mainly in the sulphate media and several oxidation products were identified with all three contaminants, while some evidence of progressive degradation, e.g., ring-opening products, was observed only with t-OPPE. The possible reasons for the lack of further degradation in BTA and DBP are too short of an EO treatment time and perhaps a lack of detection due to unsuitable analytical methods for more polar TPs. Results demonstrate that BDD-based EO is a robust method for the efficient removal of structurally diverse organic contaminants, making it a promising candidate for advanced water treatment technologies. Full article

The widespread discharge of industrial and urban waste has led to significant increases in the environmental concentrations of numerous chemical substances. This work presents the development of a simple and environmentally friendly dispersive liquid–liquid microextraction (DLLME) method based on a hydrophobic natural deep eutectic solvent (NADES) for the determination of selected compounds from benzotriazole, benzothiazole, paraben, and UV filter families in wastewater samples. Of the twelve NADES formulations evaluated, those composed of a 4:1 molar ratio of thymol and menthol presented the highest extraction efficiencies. The influence of key experimental variables such as the pH of the aqueous sample, the ratio of NADES phase to sample volume, and the extraction time on the extraction efficiency was investigated using a multivariate optimization. Under optimal conditions, relative standard deviations below 15% and recoveries for spiked wastewater samples ranged between 82 and 108%, demonstrating the suitability of the method for routine water-quality monitoring. The sustainability and practicality of the developed method was evaluated using the assessment tools ChlorTox, AGREEprep, AGRRE, and BAGI, obtaining scores of 0.005 g in the NADES-DLLME method, 0.70, 0.52, and 72.5, respectively, demonstrating that the method is green and reliable. Full article

To ensure the inherent safety of fine chemical nitration processes, the nitration reaction of benzotriazole ketone was selected as the research object. The thermal decomposition and reaction characteristics of the nitration system were studied using a combination of differential scanning calorimetry (DSC), reaction calorimetry (RC1), and accelerating rate calorimetry (ARC). The results showed that the nitration product released 455.77 kJ/kg of heat upon decomposition, significantly higher than the 306.86 kJ/kg of the original material, indicating increased thermal risk. Through process hazard analysis based on GB/T 42300-2022, key parameters such as the temperature at which the time to maximum rate is 24 h under adiabatic conditions (T_D24), maximum temperature of the synthesis reaction (MTSR), and maximum temperature for technical reason (MTT) were determined, and the reaction was classified as hazard level 5, suggesting a high risk of runaway and secondary explosion. Process intensification strategies were then proposed and verified by dynamic calorimetry: the adiabatic temperature increase (ΔT_ad) was reduced from 86.70 °C in the semi-batch reactor to 19.95 °C in the optimized continuous process, effectively improving thermal safety. These findings provide a reliable reference for the quantitative risk evaluation and safe design of nitration processes in fine chemical manufacturing. Full article

In this study, the removal of benzotriazole (BTA), a pervasive aquatic contaminant widely used for its anti-corrosion, UV-stabilizing, and antioxidant properties, by nanomagnetite, biochar, and nanomagnetite–biochar composite is investigated. Nanomagnetite and nanomagnetite–biochar composite were synthesized under anoxic conditions and tested for BTA removal efficiency at neutral pH under both oxic and anoxic conditions at different time scales. Within the short time scale (up to 8 h), the removal of BTA by nanomagnetite–biochar composite was shown to be due to BTA deprotonation by the nanomagnetite surface. Through proton liberation, Fe²⁺ is released in accordance with the reaction Fe₃O₄ + 2H⁺ → Fe₂O₃ + Fe²⁺ + H₂O, which likely influences BTA complexation and its possible redox degradation. On the longer time scale, biochar achieved higher removal efficiency: 50% BTA removed within 48 h, due to formation of a ternary complex with surface Ca²⁺ ions, or 75% BTA removed after HCl biochar acid wash followed by Ca²⁺ surface saturation. As BTA presents significant environmental risks due to its extensive industrial applications, the present study offers critical insights into the mechanisms of BTA removal by nanomagnetite–biochar composite, and highlights the potential of such materials for water treatment applications. Full article

This research focuses on the removal of emerging contaminants (CEC) present in synthetic aqueous matrices. Azole compounds were selected as CEC of interest due to their persistence and toxicity, particularly the triazole and oxazole groups. These compounds are also trace contaminants listed in the proposed revision of Directive 91/271/EEC on urban wastewater treatment and the 3rd European Union Observation List (Implementing Decision EU 2020/116), highlighting their regulatory importance. The draft Directive includes the implementation of quaternary treatments to achieve the highest possible removal rates of micropollutants. Among the technologies used on a large scale are some advanced oxidation processes (AOP), often combined with adsorption on activated carbon (AC). Laboratory-scale pilot plants have been designed and operated in this research, including UV photolysis and oxidation with H₂O₂ and adsorption with GAC. The results demonstrate that UV photolysis is able to remove all the selected CECs except fluconazole, reaching eliminations higher than 86% at high doses of 31.000 J/m². Treatment by H₂O₂ achieved removals of 4 to 55%, proving to be ineffective in the degradation of persistent compounds when acting as a single technology. Adsorption by AC is improved with longer contact times, reaching removals above 80% for benzotriazole and methyl benzotriazole at short contact times, followed by sulfamethoxazole and tebuconazole. Fluconazole had a mean adsorption capacity at low contact times, while metconazole and penconazole showed low adsorption capacities. Full article

Bionic superhydrophobic coatings were prepared on Q235 steel substrates by combining hexamethylenetetramine (HMTA) and benzotriazole (BTA) with methyltrimethoxysilane (MTMS), nano-silica, zinc oxide, and polydimethylsiloxane (PDMS). Three-dimensional morphology analysis revealed micro- and nanostructures in the coating. The coating’s corrosion resistance was demonstrated through electrochemical impedance spectroscopy (EIS). X-ray photoelectron spectroscopy (XPS) analysis confirmed zinc oxide embedding within the micro- and nano-rough structures. The optimized bionic coating achieved a contact angle (CA) of 161.2° and a sliding angle (SA) of 2.0°. The bionic coatings demonstrated low adhesion, dynamic hydrophobicity, and self-cleaning properties when exposed to various liquids and contaminants. The corrosion inhibition mechanism of BTA and HMTA in superhydrophobic coatings involves a synergistic combination of chemisorption, complexation, and physical barrier effects. This MTMS-SiO₂-ZnO-PDMS-HMTA-BTA coating demonstrated the highest protection efficiency among the tested formulations. The optimized coating achieved a protection efficiency of 92.12%. Additionally, the bionic coating demonstrated effective UV resistance, maintaining a contact angle of 153.7° after 120 h of UV exposure. Full article

Background: The increasing prevalence of antimicrobial resistant highlights the urgent need for the new therapeutic agents. This study aimed to design and synthesize fused tricyclic benzimidazole–thiazinone derivatives (CS1–CS10) through a convenient method and evaluate their antimicrobial activity against various microorganisms. Methods: A series of fused tricyclic benzimidazole–thiazinone derivatives was rationally designed and synthesized in one pot by the reaction between trans substituted acrylic acids and 1H-benzo[d]imidazole-2-thiol using coupling reagent TBTU (2-(1H-benzotriazol-1-yl)-1,1,3,3-tetramethyluronium tetrafluoroborate). The structure of these compounds was confirmed through various spectroscopic techniques like IR, ¹H and ¹³C NMR, the DEPT and 2D-HMQC NMR techniques were also performed to confirm the relation of both carbon and proton. Further, the compounds were in vitro evaluated for their effectiveness against the Candida species and a panel of standard bacterial isolates. Results: The synthesized compounds showed moderate antimicrobial activity. Among all of the compounds, CS4 exhibited potent inhibition against Pseudomonas aeruginosa and Escherichia coli at 256 and 512 μg/mL concentrations, respectively. Additional research indicated that compound CS4 demonstrated a synergistic effect after combining with the standard antibacterial drug ciprofloxacin. Conclusions: These results suggest that CS4 is the best-synthesized antibacterial agent particularly in combination therapies. These findings highlight its promise for further development as a novel antibacterial agent. Full article

Metal complexes of benzotriazole-type ligands continue to attract the intense interest of many inorganic chemistry groups around the world for a variety of reasons, including their aesthetically beautiful structures, physical properties and applications. 1-methylbenzotriazole (Mebta) is the N-substituted archetype of the parent 1H-benzotriazole. The first attempt to build a “periodic table” of Mebta, which includes its complexes with several metal ions, is described in this work. This, at first glance, trivial ligand has led to interesting results in terms of the chemistry, structures and properties of its metal complexes. This work reviews the to-date published coordination chemistry of Mebta with Mn(II), Fe(II), Fe(III), Co(II), Ni(II), Cu(I), Cu(II), Zn(II), Pd(II), Au(I) and {U^VIO₂}²⁺, with emphasis on their preparations, reactivity, structures and properties. Unpublished results from our group comprising other Co(II), Ni(II), Cu(II) and Zn(II) complexes, as well as Cd(II), Hg(II), Ag(I), In(III) and Sn(IV) ones are briefly reported. Mebta can also provide access to 1D and 3D heterometallic thiocyanato-bridged Co(II)/Hg(II) and Ni(II)/Hg(II) compounds. In almost all cases, Mebta behaves as a monodentate ligand with the nitrogen of position 3 of the azole ring as the donor atom. However, there are two copper complexes in which this molecule adopts a bidentate bridging coordination behavior. Our efforts to complete the “periodic table” of Mebta are continued. Full article

Despite the numerous benefits of intensive air transport development, many activities associated with the operation of airports contribute to environmental pollution. The purpose of this research was the development, optimization, and validation of a headspace–solid-phase microextraction–comprehensive two-dimensional gas chromatography–time of flight–mass spectrometry (HS-SPME-GC × GC-TOF-MS)-based procedure for determining anti-corrosive compounds in airport stormwater. Optimized HS-SPME conditions include: 45 min extraction time, 100 °C temperature, 1.0 g salt addition, and 10 min desorption time at 270 °C. The developed procedure is sensitive, selective, accurate (recoveries ≥ 80.0%), and precise (the coefficient of variation (CV) ≤ 14.9%), making it a highly suitable tool for extensive airport stormwater quality monitoring. The validated analytical protocol was successfully used to detect pollutants, including 1H-BT, 4-MeBT, 5-MeBT, and 5,6-diMe-1H-BT, in stormwater from various European airports with different flight capacities. Throughout the sampling period at the investigated airports, 1H-benzotriazole was found in the highest concentrations, ranging from below the MQL to 467 mg/L. An ecotoxicological risk assessment revealed that 69% of the sites exhibited high risk levels (Risk Quotient ≥ 1). The developed procedure and carried out environmental risk assessments of benzotriazoles in airport stormwater enable an evidence-based approach to sustainable airport stormwater management. Full article

Despite the increasing interest in enhancing the electrochemical stability of Al alloys through protective coatings, the role of electron donor agents during coating formation remains poorly understood in terms of morphological control and anticorrosion properties in aqueous environments. In this context, 1H-Benzotriazole (BTA) was utilized as a proof of concept to regulate the in situ reactive integration of V₂O₅ into the alumina layer via the plasma electrolytic oxidation of a 6061 Al alloy. BTA played a crucial role in chemically incorporating V₂O₅ into the alumina coating by supplying electrons to VO₃⁻ ions, facilitating their reduction. The quantity of BTA added to the electrolyte was found to influence defect morphology and concurrently enhance the chemical incorporation of V₂O₅. Notably, corrosion measurements revealed that the less porous hybrid film formed with higher corrosion resistance was associated with the utilization of increased concentrations of BTA. These findings highlight the potential of BTA in modifying the structure and improving the ability of alumina coatings to resist corrosion, enabling advanced applications in protecting Al alloys from corrosion. Full article