Search Results (59)

Bacterial cellulose (BC) is a highly pure and crystalline cellulose produced via bacterial fermentation. However, due to its chemical structure made of strong hydrogen bonds and its high molecular weight, BC can neither be melted nor dissolved by common solvents. Therefore, processing BC implies the use of very strong, often toxic and dangerous chemicals. In this study, we proved a green method to produce electrospun BC fibers by testing different ionic liquids (ILs), namely, 1-butyl-3-methylimidazolium acetate (BmimAc), 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide (EmimTFSI) and 1-ethyl-3-methylimidazolium dicyanamide (EmimDCA), either individually or as binary mixtures. Moreover, γ-valerolactone (GVL) was tested as a co-solvent derived from renewable sources to replace dimethyl sulfoxide (DMSO), aimed at making the viscosity of the cellulose solutions suitable for electrospinning. A BmimAc and BmimAc/EmimTFSI (1:1 w/w) mixture could dissolve BC up to 3 w%. GVL was successfully applied in combination with BmimAc as an alternative to DMSO. By optimizing the electrospinning parameters, meshes of continuous BC fibers, with average diameters ~0.5 μm, were produced, showing well-defined pore structures and higher water absorption capacity than pristine BC. The results demonstrated that BC could be dissolved and electrospun via a BmimAc/GVL solvent system, obtaining ultrafine fibers with defined morphology, thus suggesting possible greener methods for cellulose processing. Full article

The cyclization of propargyl alcohols with CO₂ represents a highly significant method for the utilization of CO₂. The resulting cyclic carbonates possesses high chemical value and hold great potential for applications in battery electrolytes, polymer precursors, and pharmaceutical intermediates. However, most existing reports on this cyclization have been limited to simple propargyl alcohol substrates that are substituted with inert alkyl, cycloalkyl, and phenyl groups. For functionalized propargyl alcohols, such as alkyne-1,2-diols, only a single report has been documented thus far. In this study, we have developed an innovative catalytic system comprising cost-effective copper salts and environmentally friendly ionic liquids (CuCl/1-ethyl-3-methylimidazolium acetate) for the cyclization of alkyne-1,2-diols with CO₂. Compared to the previously reported AgF/bulky monophosphine ligand (BrettPhos) system, our system is free of traditional volatile solvents, phosphine ligands, and additives. Notably, this is the first reported Cu(I)-catalyzed system for this cyclization, offering significant advantages in terms of cost-effectiveness and reduced toxicity compared to silver salts. Moreover, the use of ionic liquids ensures considerable recyclability, further enhancing the sustainability and practicality of this approach. Full article

The use of ionic liquids in biomass pretreatment for ethanol production has seen increased attention in recent years. In this work, 1-butyl-3-methylimidazolium chloride ([Bmim]Cl), 1-allyl-3-methylimidazolium chloride ([Amim]Cl), and 1-ethyl-3-methylimidazolium acetate ([Emim]Ac) were used to regenerate and recover significant amount of hemicellulose and lignin from soybean meal, flakes, and hulls. The regenerated lignin and hemicellulose were characterized using Fourier-transform infrared (FTIR) spectroscopy and pyrolysis-gas chromatography/mass spectrometry (Py-GC/MS). For all three ionic liquids, the amount of regenerated hemicellulose and lignin ranged from approximately 6 to 12% and 8 to 19%, respectively. Lignin characteristic bands 1738.8, 1652.6, 1516.4, 1455.2, and 1174.9 cm⁻¹ were identified in the FTIR spectrum. The regenerated hemicellulose showed the characteristic bands 1658.31, 1434.14, 1167.98, and 865.20 cm⁻¹. The Py-GC/MS analysis of the regenerated lignin showed the characteristic grass lignin pyrolyzates phenol, 2-methoxyphenol, 4-methylphenol, 2-benzaldehyde, 2-methoxy-4-vinylphenol, phenol-2,6-dimethoxy, and ethylvanillin. Full article

Cellulose, a sustainable raw material, holds great promise as an ideal candidate for membrane materials. In this work, we focused on establishing a low-cost route for producing cellulose microfiltration membranes by adopting a co-solvent system comprising the ionic liquid 1-ethyl-3-methylimidazolium acetate ([EMIM]OAc) and acetone. The introduction of acetone as a co-solvent into the casting solution allowed control over the viscosity, thereby significantly enhancing the morphologies and filtration performances of the resulting cellulose membranes. Indeed, applying this co-solvent allowed the water permeability to be significantly increased, while maintaining high rejections. Furthermore, the prepared cellulose membrane demonstrated excellent fouling resistance behavior and flux recovery behavior during a challenging oil-in-water emulsion filtration. These results highlight a promising approach to fabricate high-performance cellulose membranes. Full article

The solvolysis reaction with ionic liquids is one of the most frequently used methods for producing nanometer-sized cellulose. In this study, the nanocellulose was obtained by reacting microcrystalline cellulose with 1-ethyl-3-methylimidazolium acetate (EmimOAc). The aim of this research was to determine the influence of various antisolvents used in the regeneration of cellulose after treatment with ionic liquid on its properties. The following antisolvents were used in this research: acetone, acetonitrile, water, ethanol and a mixture of acetone and water in a 1:1 v/v ratio. The nanocellulose was characterized by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), dynamic light scattering (DLS), scanning electron microscopy (SEM) and elemental analysis (EA). The results show that the antisolvent used to regenerate cellulose after the solvolysis reaction with EmimOAc affects its properties. Water, ethanol and a mixture of acetone and water successfully removed the used ionic liquid from the cellulose structure, while acetone and acetonitrile were unable to completely remove EmimOAc from the cellulosic material. The results of the XRD analysis indicate that there is a correlation between the ionic liquid content in the regenerated cellulose and its degree of crystallinity. Among the tested solvents, water leads to the effective removal of EmimOAc from the cellulose structure, which is additionally characterized by the smallest particle size and non-formation of agglomerates. Full article

The dissolution of wool yarns in the ionic liquid 1-ethyl-3-methyl-imidazolium acetate [C2mim][OAc] has been investigated. Wool yarns were submerged into [C2mim][OAc] and dissolved for various times and temperatures before coagulating with water. Optical microscopy was used to track the yarn’s cross-sectional area. We propose that there are two competing dissolution processes, one rate-limited by disulfide bonds at low temperatures (LTs), and a second by hydrogen bonds at high temperatures (HTs), with a crossover point between the two regimes at 70 ℃. The corresponding activation energies were E_LT = 127 ± 9 kJ/mol and E_HT = 34 ± 1 kJ/mol. The remaining area of the dissolved wool yarn could be shifted via time–temperature superposition to plot a single master curve of area against time for both regions. Finally, the dissolution could be modelled by a diffusion process, giving self-diffusion coefficients for the [C2mim][OAc] ions (0.64–15.31 × 10⁻¹³ m²/s). Full article

We present an extension of our previously developed all-atom force field BILFF (Bio-polymers in Ionic Liquids Force Field) to three different ionic liquids: 1-ethyl-3-methyl-1,2,3-triazolium acetate ([EMTr][OAc]), 1-ethyl-3-methyl-1,2,3-triazolium benzoate ([EMTr][OBz]), and 1-ethyl-3-methylimidazolium benzoate ([EMIm][OBz]). These ionic liquids are of practical importance as they have the ability to dissolve significant amounts of cellulose even at room temperature. Our force field is optimized to accurately reproduce the strong hydrogen bonding in the system with nearly quantum chemical accuracy. A very good agreement between the microstructure of the quantum chemical simulations over a wide temperature range and experimental density data with the results of BILFF were observed. Non-trivial effects, such as the solvation shell structure and $\pi$–$\pi$ stacking of the cations, are also accurately reproduced. Our force field enables accurate simulations of larger systems, such as solvated cellulose in different (aqueous) ionic liquids, and is the first to present the optimized parameters for mixtures of these solvents and water. Full article

Amyloid fibrils have immense potential to become the basis of modern biomaterials. The formation of amyloid fibrils in vitro strongly depends on the solvent properties. Ionic liquids (ILs), alternative solvents with tunable properties, have been shown to modulate amyloid fibrillization. In this work, we studied the impact of five ILs with 1-ethyl-3-methylimidazolium cation [EMIM⁺] and anions of Hofmeisterseries hydrogen sulfate [HSO₄⁻], acetate [AC⁻], chloride [Cl⁻], nitrate [NO₃⁻], and tetrafluoroborate [BF₄⁻] on the kinetics of insulin fibrillization and morphology, and the structure of insulin fibrils when applying fluorescence spectroscopy, AFM and ATR-FTIR spectroscopy. We found that the studied ILs were able to speed up the fibrillization process in an anion- and IL-concentration-dependent manner. At an IL concentration of 100 mM, the efficiency of the anions at promoting insulin amyloid fibrillization followed the reverse Hofmeister series, indicating the direct binding of ions with the protein surface. At a concentration of 25 mM, fibrils with different morphologies were formed, yet with similar secondary structure content. Moreover, no correlation with the Hofmeister ranking was detected for kinetics parameters. IL with the kosmotropic strongly hydrated [HSO₄⁻] anion induced the formation of large amyloid fibril clusters, while the other kosmotropic anion [AC⁻] along with [Cl⁻] led to the formation of fibrils with similar needle-like morphologies to those formed in the IL-free solvent. The presence of the ILs with the chaotropic anions [NO₃⁻] and [BF₄⁻] resulted in longer laterally associated fibrils. The effect of the selected ILs was driven by a sensitive balance and interplay between specific protein–ion and ion–water interactions and non-specific long-range electrostatic shielding. Full article

Natural astaxanthin has been widely used in the food, cosmetic, and medicine industries due to its exceptional biological activity. Shrimp shell is one of the primary natural biological sources of astaxanthin. However, after astaxanthin recovery, there is still a lot of chitin contained in the residues. In this study, the residue from shrimp (Penaeus vannamei) shells after astaxanthin extraction using ionic liquid (IL) 1-ethyl-3-methyl-imidazolium acetate ([Emim]Ac) was used as a bioadsorbent to remove fluoride from the aqueous solution. The results show the IL extraction conditions, including the solid/liquid ratio, temperature, time, and particle size, all played important roles in the removal of fluoride by the shrimp shell residue. The shrimp shells treated using [Emim]Ac at 100 °C for 2 h exhibited an obvious porous structure, and the porosity showed a positive linear correlation with defluorination (D_F, %). Moreover, the adsorption process of fluoride was nonspontaneous and endothermic, which fits well with both the pseudo-second-order and Langmuir models. The maximum adsorption capacity calculated according to the Langmuir model is 3.29 mg/g, which is better than most bioadsorbents. This study provides a low-cost and efficient method for the preparation of adsorbents from shrimp processing waste to remove fluoride from wastewater. Full article

The first step towards the production and marketing of bioplastics based on renewable and sustainable materials is to know their behavior at a semi-industrial scale. For this reason, in this work, the properties of thermoplastic starch (TPS)/polyvinyl alcohol (PVA) films plasticized by a green solvent, as the 1-ethyl-3-methylimidazolium acetate ([Emim⁺][Ac⁻]) ionic liquid, produced by melt-mixing were studied. These blends were prepared with a different content of [Emim⁺][Ac⁻] (27.5–42.5 %wt.) as a unique plasticizer. According to the results, this ionic liquid is an excellent plasticizer due to the transformation of the crystalline structure of the starch to an amorphous state, the increase in flexibility, and the drop in T_g, as the [Emim⁺][Ac⁻] amount increases. These findings show that the properties of these biomaterials could be modified in the function of [Emim⁺][Ac⁻] content in the formulations of TPS, depending on their final use, thus becoming a functional alternative to conventional polymers. Full article

A simple analytical method was developed and evaluated for the determination of two antifouling biocides using an ionic liquid-dispersive liquid–liquid micro-extraction (IL-DLLME) and a high-performance liquid chromatography–electrospray ionization mass spectrometry (LC-ESI-MS) analysis. Irgarol 1051 and Sea-Nine 211 were extracted from deionized water, lake water, and seawater using IL 1-hexyl-3-methylimidazolium hexafluorophosphate ([HMIm][PF6]) and ethyl acetate as the extraction solvent and the dispersion solvent. Several factors were considered, including the type and volume of extraction and dispersive solvent, IL amount, sample pH, salt effect, and cooling temperature. The developed method resulted in a recovery range of 78.7–90.3%, with a relative standard deviation (RSD, n = 3) less than 7.5%. The analytes were enriched greater than 40-fold, and the limits of detection (LOD) for two antifouling biocides were 0.01–0.1 μg L⁻¹. The method was effectively applied for the analysis of real samples of freshwater as well as samples of seawater. Full article

Ionic liquids (ILs) are recyclable, non-volatile, and can dissolve cellulose, a natural polymer that is insoluble in versatile solvents. Therefore, ILs have been used to modify cellulose. However, 1-ethyl-3-methylimidazolium acetate (EmimOAc), a commercially available IL often used to dissolve and modify cellulose to prepare cellulose-based materials, causes the undesired introduction of an acetyl group derived from the acetate anion of EmimOAc onto the hydroxy group of cellulose during esterification. In this study, for cellulose esterification, we prepared aryloxy ILs as non-carboxylate-type and basic ILs, which can theoretically prevent the undesired introduction of an acyl group from the IL onto the hydroxy group of cellulose. The optimized 1-ethyl-3-methylimidazolium 2-pyridinolate (Emim2OPy) and mixed solvent system achieved rapid cellulose esterification (within 30 min) with an excellent degree of substitution (DS) value (up to >2.9) derived from the employed low-reactive vinyl esters and bio-based unsaturated aldehydes, without any undesired substituent introduction from side reactions. Full article

A method for the synthesis of cellulose nanoparticles using the ionic liquid 1-ethyl-3-methylimidazolium acetate has been optimised. The use of a highly biocompatible biopolymer such as cellulose, together with the use of an ionic liquid, makes this method a promising way to obtain nanoparticles with good capability for drug carrying. The operating conditions of the synthesis have been optimised based on the average hydrodynamic diameter, the polydispersity index, determined by Dynamic Light Scattering (DLS) and the Z-potential, obtained by phase analysis light scattering (PALS), to obtain cellulose nanoparticles suitable for use in biomedicine. The obtained cellulose nanoparticles have been characterised by Fourier transform infrared spectroscopy (FTIR) with attenuated total reflectance (ATR), field emission scanning electron microscopy (FESEM) and thermogravimetric analysis (TGA/DTA). Finally, cell viability studies have been performed with a cancer cell line (HeLa) and with a healthy cell line (EA.hy926). These have shown that the cellulose nanoparticles obtained are not cytotoxic in the concentration range of the studied nanoparticles. The results obtained in this work constitute a starting point for future studies on the use of cellulose nanoparticles, synthesised from ionic liquids, for biomedical applications such as targeted drug release or controlled drug release. Full article

In this work, by combining maleic anhydride-grafted polypropylene (PPgMA) and three different ionic liquids (ILs), i.e., tributyl (ethyl) phosphonium diethyl phosphate (denoted P⁺DEP), 1-ethyl-3-methylimidazolium diethyl phosphate (denoted EMIM DEP), and 1-ethyl-3-methylimidazolium acetate (denoted EMIM Ac), new ionic PP/IL polymer materials are generated and denoted as LIonomers. The structuration of ILs in LIonomers occurs from a nano/microphase separation process proved by TEM. NMR analyses reveal the existence of ionic–ionic and ionic–dipolar interactions between PPgMA and ILs within LIonomers. The rheological behavior of such IL/polymer combinations interpret the existence of interactions between maleic anhydride group and cation or anion composing the ionic liquid. These interactions can be tuned by the nature of cation (P⁺DEP vs. EMIM DEP) and anion (EMIM DEP vs. EMIM Ac) but also depend on the IL content. Thermal analyses demonstrate that IL could affect the crystallization process according to different pathways. Thanks to the maleic anhydride/IL interactions, an excellent compromise between stiffness and stretchability is obtained paving the way for processing new polyolefin-based materials. Full article

In this report, 1-ethyl-3-methylimidazolium acetate, [EMIM][AcO] ionic liquid (IL) and acetic acid (AA) comprised solvents were used for the thermal treatment of poly (vinylidene difluoride), PVDF. Here, besides the various combinations of IL and AA in solvents, the pure IL and AA were also applied as a solvent upon thermal treatments. The samples obtained after the treatment were analysed for structural and crystalline phase changes, porosity, and molecular weight distribution with various analytical techniques. The Kamlet-Taft parameters measurement of the IL and AA containing solvents with different solvatochromic dyes was also performed to examine their solvent properties and correlate with the properties of the treated PVDF materials. The treatment of PVDF with pure IL results in the formation of highly carbonaceous material due to extensive dehydroflurination (DHF) as well as possibly successive cross-linking in the polymer chains. Upon IL and AA combined solvent treatment, the neat PVDF which composed of both α- and β crystalline phases was transformed to porous and β-phase rich material whereas in case of pure AA the non-porous and pure α-phase polymeric entity was obtained. A combined mixture of IL and AA resulted in a limited the DHF process and subsequent cross-linking in the polymer chains of PVDF allowed the formation of a porous material. It was observed that the porosity of the thermally treated materials was steadily decreasing with increase in the amount of AA in solvents composition and solvent with an AA:IL mole ratio of 2:1 resulted in a PVDF material with the highest porosity amongst the applied solvents. A recovery method for the IL and AA combined solvent after the thermal treatment of PVDF was also established. Hence, with varying the type of solvents in terms of composition, the highly carbonaceous materials as well as materials with different porosities as well as crystalline phases can be obtained. Most importantly here, we introduced new IL and AA containing recoverable solvents for the synthesis of porous PVDF material with the electroactive β-phase. Full article