Search Results (20)

Recently, the potential of recycled materials to improve the performance of concrete and other building materials has become an important research topic. It is known that various methods are applied to improve the tensile strength and energy absorption capacity of cementitious systems. One of the most common of these methods is the addition of fibers to the mixture. In this study, the effects of surface-modified polypropylene (PP) fibers obtained from recycled masks on the mechanical properties of mortar mixtures were investigated. In order to improve the matrix–fiber interface performance, 6 mm and 12 mm long recycled PP fibers were chemically coated within the scope of surface modification using 1-Vinyl-1,2,4-Triazole and Vinyl Acetate. With this modification made on the surface of PP fibers, we aimed to increase the surface roughness of the fibers and improve their adhesion to the matrix. Thus, we aimed to increase the mechanical properties of mortar mixtures as a result of the fibers performing more effectively in the concrete matrix. FTIR AND SEM-EDS analyses confirmed the success of the modification and the applicability of 1-Vinyl-1,2,4-Triazole and Vinyl Acetate to the fiber surface and showed that the fibers were successfully modified. It is seen that the fibers modified with Vinyl Acetate exhibit superior performance in terms of both the workability and strength performance of cementitious systems compared to the fibers modified with 1-Vinyl-1,2,4-Triazole. This study provides a significant contribution to sustainable construction materials by revealing the potential of using recycled materials in cementitious systems. Full article

New furan, thiophene, and triazole oximes were synthesized through several-step reaction paths to investigate their potential for the development of central nervous systems (CNS)-active and cholinesterase-targeted therapeutics in organophosphorus compound (OP) poisonings. Treating patients with acute OP poisoning is still a challenge despite the development of a large number of oxime compounds that should have the capacity to reactivate acetylcholinesterase (AChE) and butyrylcholinesterase (BChE). The activity of these two enzymes, crucial for neurotransmission, is blocked by OP, which has the consequence of disturbing normal cholinergic nerve signal transduction in the peripheral and CNS, leading to a cholinergic crisis. The oximes in use have one or two pyridinium rings and cross the brain–blood barrier poorly due to the quaternary nitrogen. Following our recent study on 2-thienostilbene oximes, in this paper, we described the synthesis of 63 heterostilbene derivatives, of which 26 oximes were tested as inhibitors and reactivators of AChE and BChE inhibited by OP nerve agents–sarin and cyclosarin. While the majority of oximes were potent inhibitors of both enzymes in the micromolar range, we identified several oximes as BChE or AChE selective inhibitors with the potential for drug development. Furthermore, the oximes were poor reactivators of AChE; four heterocyclic derivatives reactivated cyclosarin-inhibited BChE up to 70%, and cis,trans-5 [2-((Z)-2-(5-((E)-(hydroxyimino)methyl)thiophen-2-yl)vinyl)benzonitrile] had a reactivation efficacy comparable to the standard oxime HI-6. In silico analysis and molecular docking studies, including molecular dynamics simulation, connected kinetic data to the structural features of these oximes and confirmed their productive interactions with the active site of cyclosarin-inhibited BChE. Based on inhibition and reactivation and their ADMET properties regarding lipophilicity, CNS activity, and hepatotoxicity, these compounds could be considered for further development of CNS-active reactivators in OP poisoning as well as cholinesterase-targeted therapeutics in neurodegenerative diseases such as Alzheimer’s and Parkinson’s. Full article

New composite hydrogels (CH) based on bacterial cellulose (BC) and poly-1-vinyl-1,2,4-triazole (PVT) doped with orthophosphoric acid (oPA), presenting interpenetrating polymeric networks (IPN), have been synthesized. The mesoscopic study of the supramolecular structure (SMS) of both native cellulose, produced by the strain Komagataeibacter rhaeticus, and the CH based on BC and containing PVT/oPA complex were carried out in a wide range of momentum transfer using ultra- and classical small-angle neutron scattering techniques. The two SMS hierarchical levels were revealed from 1.6 nm to 2.5 μm for the objects under investigation. In addition, it was shown that the native BC had a correlation peak on the small-angle scattering curves at 0.00124 Å⁻¹, with the correlation length ξ being equal to ca. 510 nm. This motive was also retained in the IPN. The data obtained allowed the estimation of the fractal dimensions and ranges of self-similarity and gave new information about the BC mesostructure and its CH. Furthermore, we revealed them to be in coincidence with Brown’s BC model, which was earlier supported by Fink’s results. Full article

New water-soluble nanocomposites with cobalt oxide nanoparticles (Co₃O₄NPs) in a poly(1-vinyl-1,2,4-triazole) (PVT) matrix have been synthesized. The PVT used as a stabilizing polymer matrix was obtained by radical polymerization of 1-vinyl-1,2,4-triazole (VT). The polymer nanocomposites with Co₃O₄ nanoparticles were characterized by ultraviolet–visible, Fourier-transform infrared spectroscopy, atomic absorption spectroscopy, transmission electron microscopy, dynamic light scattering, gel permeation chromatography, and simultaneous thermogravimetric analysis. The resulting polymer nanocomposites consist of spherical isolated cobalt nanoparticles with a diameter of 1 to 13 nm. The average hydrodynamic diameters of macromolecular coils are 15–112 nm. The cobalt content in nanocomposites ranges from 1.5 to 11.0 wt.%. The thermal stability of nanocomposites is up to 320 °C. Full article

In this work, the structural characteristics and DC electrical conductivity of firstly synthesized organic–inorganic nanocomposites of thermoelectric Te⁰ nanoparticles (1.4, 2.8, 4.3 wt%) and poly(1-vinyl-1,2,4-triazole) (PVT) were analyzed. The composites were characterized by high-resolution transmission electron microscopy, X-ray diffractometry, UV-Vis spectroscopy, and dynamic light scattering analysis. The study results showed that the nanocomposite nanoparticles distributed in the polymer matrix had a shape close to spherical and an average size of 4–18 nm. The average size of the nanoparticles was determined using the Brus model relation. The optical band gap applied in the model was determined on the basis of UV-Vis data by the Tauc method and the 10% absorption method. The values obtained varied between 2.9 and 5.1 nm. These values are in good agreement with the values of the nanoparticle size, which are typical for their fractions presented in the nanocomposite. The characteristic sizes of the nanoparticles in the fractions obtained from the Pesika size distribution data were 4.6, 4.9, and 5.0 nm for the nanocomposites with percentages of 1.4, 2.8, and 4.3%, respectively. The DC electrical conductivity of the nanocomposites was measured by a two-probe method in the temperature range of 25–80 °C. It was found that the formation of an inorganic nanophase in the PVT polymer as well as an increase in the average size of nanoparticles led to an increase in the DC conductivity over the entire temperature range. The results revealed that the DC electrical conductivity of nanocomposites with a Tellurium content of 2.8, 4.3 wt% at 80 °C becomes higher than the conventional boundary of 10⁻¹⁰ S/cm separating dielectrics and semiconductors. Full article

Functional copolymers of 1-vinyl-1,2,4-triazole (VT) and N-vinylcarbazole (VK) were synthesized using a free-radical polymerization. The content of hole-conducting N-vinylcarbazole units was found to be 9, 16, and 37 mol. %. Fourier transform infrared spectroscopy, ¹H-NMR spectroscopy, gel permeation chromatography, thermogravimetric analysis, and differential scanning were applied to characterize the poly(VT–co–VK). Based on a polymer ligand, metal−polymer complexes with Tb³⁺ ions were obtained in a polymethyl methacrylate matrix, and their luminescent properties were studied. The maximum photoluminescence of the complex can be achieved when using 16 mol. % of N-vinylcarbazole units. This is because two photoprocesses (excimer formation and excitation energy transfer) occur simultaneously and competitively. Full article

In this review, a comparative analysis of the literature and our own results obtained in the study of the physicochemical, dielectric, and proton-conducting properties of composite polymer materials based on 1H-1,2,4-triazole has been carried out. It has been established that 1H-1,2,4-triazole and homopolymers and copolymers of 1-vinyl-1,2,4-triazole are promising for the development of proton-conducting fuel cell membranes. They significantly improve the basic characteristics of electrolyte membranes, increase their film-forming ability, increase thermal stability up to 300–330 °C, increase the electrochemical stability region up to 3–4 V, promote high mechanical strength and morphological stability of membranes, and provide high ionic conductivity (up to 10⁻³–10⁻¹ S/cm) under anhydrous conditions at temperatures above 100 °C. There is also an improvement in the solubility and a decrease in the glass transition temperature of polymers based on 1-vinyl-1,2,4-triazole, which facilitates the processing and formation of membrane films. The results obtained demonstrate the uniqueness of 1H-1,2,4-triazole and (co)polymers based on 1-vinyl-1,2,4-triazole and the promise of their use for the creation of heat-resistant plastic and electrochemically stable, mechanically strong proton-conducting membranes with high ionic conductivity under anhydrous conditions and at high temperatures. Full article

Gold nanoparticles (AuNPs) stabilized with poly(1-vinyl-1,2,4-triazole) (PVT) have been synthesized via a one-pot manner in irradiated solutions of 1-vinyl-1,2,4-triazole (VT) and Au(III) ions. The transmission electron microscopy examinations have shown that the sizes of nanoparticles formed range from 1 to 11 nm and are affected by the ratio of VT to gold ions. To study the kinetics peculiarities of the VT polymerization and assembling of AuNPs, UV-Vis spectroscopy was used. The analysis of the data obtained reveals that an inhibition period, influenced by Au(III) concentration, is followed by the polymerization of a monomer. Importantly, the absorbed doses, corresponding to the onset of rapid polymerization, correlate with the doses at which the accelerated formation of AuNPs begins. The kinetics aspects, which could lead to such an effect, are discussed. Full article

Narrow dispersed poly(1-vinyl-1,2,4-triazole) (PVT) was synthesized by reversible addition–fragmentation chain transfer (RAFT) polymerization of 1-vinyl-1,2,4-triazole (VT). AIBN as the initiator and dithiocarbamates, xanthates, and trithiocarbonates as the chain transfer agents (CTA) were used. Dithiocarbamates proved to be the most efficient in VT polymerization. Gel permeation chromatography was used to determine the molecular weight distribution and polydispersity of the synthesized polymers. The presence of the CTA stabilizing and leaving groups in the PVT was confirmed by ¹H and ¹³C NMR spectroscopy. The linear dependence of the degree of polymerization on time confirms the conduct of radical polymerization in a controlled mode. The VT conversion was over 98% and the PVT number average molecular weight ranged from 11 to 61 kDa. The polydispersity of the synthesized polymers reached 1.16. The occurrence of the controlled radical polymerization was confirmed by monitoring the degree of polymerization over time. Full article

A new hydrophilic polymeric nanocomposite containing AgNPs was synthesized by chemical reduction of metal ions in an aqueous medium in the presence of the copolymer. A new water-soluble copolymer of 1-vinyl-1,2,4-triazole and vinylsulfonic acid sodium salt (poly(VT-co-Na-VSA)) was obtained by free-radical copolymerization and was used as a stabilizing precursor agent. The structural, dimensional, and morphological properties of the nanocomposite were studied by UV–Vis, FTIR, X-ray diffraction, atomic absorption, transmission and scanning electron microscopy, dynamic and electrophoretic light scattering, gel permeation chromatography, thermogravimetric analysis, and differential scanning calorimetry. Hydrodynamic diameter of macroclubs for the copolymer was 171 nm, and for the nanocomposite it was 694 nm. Zeta potential for the copolymer was −63.8 mV, and for the nanocomposite it was −70.4 mV. The nanocomposite had strong antimicrobial activity towards Gram-negative and Gram-positive microorganisms: MIC and MBC values were in the range of 0.25–4.0 and 0.5–8.0 μg/mL, respectively. Full article

The aim of our investigation was to make a comparative assessment of the biological effects of silver nanoparticles encapsulated in a natural and synthetic polymer matrix. We carried out a comparative assessment of the biological effect of silver nanocomposites on natural (arabinogalactan) and synthetic (poly-1-vinyl-1,2,4-triazole) matrices. We used 144 three-month-old white outbred male rats, which were divided into six groups. Substances were administered orally for 9 days at a dose 500 μg/kg. Twelve rats from each group were withdrawn from the experiment immediately after nine days of exposure (early period), and the remaining 12 rats were withdrawn from the experiment 6 months after the end of the nine-day exposure (long-term period). We investigated the parietal–temporal area of the cerebral cortex using histological (morphological assessments of nervous tissue), electron microscopic (calculation of mitochondrial areas and assessment of the quality of the cell nucleus), and immunohistochemical methods (study of the expression of proteins regulating apoptosis bcl-2 and caspase 3). We found that the effect of the nanocomposite on the arabinogalactan matrix causes a disturbance in the nervous tissue structure, an increase in the area of mitochondria, a disturbance of the structure of nerve cells, and activation of the process of apoptosis. Full article

Metal–polymer nanocomposite polyvinyltriazole–silver nanoparticles were obtained using one-pot synthesis in irradiated aqueous solutions of 1-vinyl-1,2,4-triazole (VT) and silver ions. Gel permeation chromatography data show that upon radiation initiation, the molecular weight of poly(1-vinyl-1,2,4-triazole) increases with increasing monomer concentration. To study the kinetics of polymerization and the features of the radiation–chemical formation of nanoparticles, UV-Vis spectroscopy was used. TEM images show a relatively small average size of the forming nanoparticles (2–3 nm) and a narrow size distribution, which shows the effective stabilization of nanoparticles by triazole substituents at a molar ratio of VT and silver ions of 25/1. The addition of ethyl alcohol was used to increase the efficiency of synthesis and suppress the crosslinking of macromolecules in solution. The results of the work show that aqueous–alcoholic solutions of 1 wt.% VT can be used to obtain soluble nanocomposite materials. 10 wt.% monomer solutions have prospects for use in the preparation of polymer gels filled with nanoparticles. Full article

Microwave irradiation has become a popular heating technique in organic synthesis, mainly due to its short reaction times, solventless reactions, and, sometimes, higher yields. Additionally, microwave irradiation lowers energy consumption and, consequently, is ideal for optimization processes. Moreover, there is evidence that microwave irradiation can improve the regioselectivity and stereoselectivity aspects of vital importance in synthesizing bioactive compounds. These crucial features of microwave irradiation contribute to its inclusion in green chemistry procedures. Since 2003, the use of microwave-assisted organic synthesis has become common in our laboratory, making our group one of the first Portuguese research groups to implement this heating source in organic synthesis. Our achievements in the transformation of heterocyclic compounds, such as (E/Z)-3-styryl-4H-chromen-4-ones, (E)-3-(2-hydroxyphenyl)-4-styryl-1H-pyrazole, (E)-2-(4-arylbut-1-en-3-yn-1-yl)-4H-chromen-4-ones, or (E)-2-[2-(5-aryl-2-methyl-2H-1,2,3-triazol-4-yl)vinyl]-4H-chromen-4-ones, will be discussed in this review, highlighting the benefits of microwave irradiation use in organic synthesis. Full article

Herein we report the synthesis of some new 1H-1,2,4-triazole functionalized chromenols (3a–3n) via tandem reactions of 1-(alkyl/aryl)-2-(1H-1,2,4-triazole-1-yl) with salicylic aldehydes and the evaluation of their antifungal activity. In silico prediction of biological activity with computer program PASS indicate that the compounds have a high novelty compared to the known antifungal agents. We did not find any close analog among the over 580,000 pharmaceutical agents in the Cortellis Drug Discovery Intelligence database at the similarity cutoff of 70%. The evaluation of antifungal activity in vitro revealed that the highest activity was exhibited by compound 3k, followed by 3n. Their MIC values for different fungi were 22.1–184.2 and 71.3–199.8 µM, respectively. Twelve from fourteen tested compounds were more active than the reference drugs ketoconazole and bifonazole. The most sensitive fungus appeared to be Trichoderma viride, while Aspergillus fumigatus was the most resistant one. It was found that the presence of the 2-(tert-butyl)-2H-chromen-2-ol substituent on the 4th position of the triazole ring is very beneficial for antifungal activity. Molecular docking studies on C. albicans sterol 14α-demethylase (CYP51) and DNA topoisomerase IV were used to predict the mechanism of antifungal activities. According to the docking results, the inhibition of CYP51 is a putative mechanism of antifungal activity of the novel chromenol derivatives. We also showed that most active compounds have a low cytotoxicity, which allows us to consider them promising antifungal agents for the subsequent testing activity in in vivo assays. Full article

Polymer electrolyte membrane (PEM) composed of polymer or polymer blend is a vital element in PEM fuel cell that allows proton transport and serves as a barrier between fuel and oxygen. Understanding the microscopic phase behavior in polymer blends is very crucial to design alternative cost-effective proton-conducting materials. In this study, the mesoscale morphologies of Nafion/poly(1-vinyl-1,2,4-triazole) (Nafion-PVTri) and Nafion/poly(vinyl phosphonic acid) (Nafion-PVPA) blend membranes were studied by dissipative particle dynamics (DPD) simulation technique. Simulation results indicate that both blend membranes can form a phase-separated microstructure due to the different hydrophobic and hydrophilic character of different polymer chains and different segments in the same polymer chain. There is a strong, attractive interaction between the phosphonic acid and sulfonic acid groups and a very strong repulsive interaction between the fluorinated and phosphonic acid groups in the Nafion-PVPA blend membrane. By increasing the PVPA content in the blend membrane, the PVPA clusters’ size gradually increases and forms a continuous phase. On the other hand, repulsive interaction between fluorinated and triazole units in the Nafion-PVTri blend is not very strong compared to the Nafion-PVPA blend, which results in different phase behavior in Nafion-PVTri blend membrane. This relatively lower repulsive interaction causes Nafion-PVTri blend membrane to have non-continuous phases regardless of the composition. Full article