Search Results (352)

The valence-shell electronic state spectroscopy of β-butyrolactone (CH₃CHCH₂CO₂) is comprehensively investigated by employing experimental and theoretical methods. We report a novel vacuum ultraviolet (VUV) absorption spectrum in the photon wavelength range from 115 to 320 nm (3.9–10.8 eV), together with ab initio quantum chemical calculations at the time-dependent density functional (TD-DFT) level of theory. The dominant electronic excitations are assigned to mixed valence-Rydberg and Rydberg transitions. The fine structure in the CH₃CHCH₂CO₂ photoabsorption spectrum has been assigned to C=O stretching, <!-- MathType@Translator@5@5@MathML2 (no namespace).tdl@MathML 2.0 (no namespace)@ --> Full article

In this study, three alternating donor–acceptor (D–A) type [12]cycloparaphenylene ([12]CPP) derivatives ([12]CPP 1a, 2a, and 3a) were designed through precise molecular engineering, and their multidimensional photophysical responses and chiroptical properties were systematically investigated. The effects of the alternating D–A architecture on electronic structure, excited-state dynamics, and optical behavior were elucidated through density functional theory (DFT) and time-dependent DFT (TD-DFT) calculations. The results show that the alternating D–A design significantly reduced the HOMO–LUMO energy gap (e.g., 3.11 eV for [12]CPP 2a), enhanced charge transfer characteristics, and induced pronounced red-shifted absorption. The introduction of an imide-based acceptor ([12]CPP 2a) further strengthened the electron push-pull interaction, exhibiting superior performance in two-photon absorption, while the symmetrically multifunctionalized structure ([12]CPP 3a) predominantly exhibited localized excitation with the highest absorption intensity but lacked charge transfer features. Chiral analysis reveals that the alternating D–A architecture modulated the distribution of chiral signals, with [12]CPP 1a displaying a strong Cotton effect in the low-wavelength region. These findings not only provide a theoretical basis for the molecular design of functionalized CPP derivatives, but also lay a solid theoretical foundation for expanding their application potential in optoelectronic devices and chiral functional materials. Full article

Access to clean water is a pressing global concern and membrane technologies play a vital role in addressing this challenge. Thin-film composite membranes prepared via interfacial polymerization (IPol) using meta-phenylenediamine (MPD) and trimesoyl chloride (TMC) exhibit excellent separation performance, but face limitations such as fouling and low hydrophilicity. This study investigated the interaction between MPD and sulfonated zinc phthalocyanine, Zn(SO₂⁻)₄Pc, as a potential strategy for enhancing membrane properties. Using Density Functional Theory (DFT) and Time-Dependent DFT (TD-DFT), we analyzed the optimized geometries, electronic structures, UV–Vis absorption spectra, FT-IR vibrational spectra, and molecular electrostatic potentials of MPD, Zn(SO₂⁻)₄Pc, and their complexes. The results show that MPD/Zn(SO₂⁻)₄Pc exhibits reduced HOMO-LUMO energy gaps and enhanced charge delocalization, particularly in aqueous environments, indicating improved stability and reactivity. Spectroscopic features confirmed strong interactions via hydrogen bonding and π–π stacking, suggesting that Zn(SO₂⁻)₄Pc can act as a co-monomer or additive during IPol to improve polyamide membrane functionality. A conformational analysis of MPD/Zn(SO₂⁻)₄Pc was conducted using density functional theory (DFT) to evaluate the impact of dihedral rotation on molecular stability. The 120° conformation was identified as the most stable, due to favorable π–π interactions and intramolecular hydrogen bonding. These findings offer computational evidence for the design of high-performance membranes with enhanced antifouling, selectivity, and structural integrity for sustainable water treatment applications. Full article

Monocular 3D object detection is a challenging task in autonomous systems due to the lack of explicit depth information in single-view images. Existing methods often depend on external depth estimators or expensive sensors, which increase computational complexity and complicate integration into existing systems. To overcome these limitations, we propose AuxDepthNet, an efficient framework for real-time monocular 3D object detection that eliminates the reliance on external depth maps or pre-trained depth models. AuxDepthNet introduces two key components: the Auxiliary Depth Feature (ADF) module, which implicitly learns depth-sensitive features to improve spatial reasoning and computational efficiency, and the Depth Position Mapping (DPM) module, which embeds depth positional information directly into the detection process to enable accurate object localization and 3D bounding box regression. Leveraging the DepthFusion Transformer (DFT) architecture, AuxDepthNet globally integrates visual and depth-sensitive features through depth-guided interactions, ensuring robust and efficient detection. Extensive experiments on the KITTI dataset show that AuxDepthNet achieves state-of-the-art performance, with ${AP}_{3D}$ scores of 24.72% (Easy), 18.63% (Moderate), and 15.31% (Hard), and ${AP}_{BEV}$ scores of 34.11% (Easy), 25.18% (Moderate), and 21.90% (Hard) at an IoU threshold of 0.7. Full article

Covalent organic frameworks (COFs) have emerged as unique catalysts for photocatalysis; however, the relationship between their building block units and optoelectronic properties remains elusive. Herein, we explored the influence of building blocks on the optoelectronic properties of benzotrithiophene-based COFs (BTT-COFs) using density functional theory (DFT) and time-dependent DFT (TD-DFT) calculations. The calculation results suggested that three critical factors—the conjugated structure, planarity, and the introduction of nitrogen heteroatoms—significantly influenced charge separation and transfer within BTT-COFs. Structure–property relationships were established through several critical quantitative parameters, such as Sr, t, and CT. Among seven BTT-COFs, BTT-Tpa (Tpa: 4,4′,4″-triaminotriphenylamine) exhibited the most efficient charge separation and the highest charge transfer capability due to the electronegativity of triphenylamine, the delocalization of its lone pair electrons, and its unique star-shaped configuration. These theoretical results will provide an essential foundation for selecting donor–acceptor units in the design of novel COF materials for photocatalytic reaction applications. Full article

Accurate multivariate time series forecasting remains a major challenge in various real-world applications, primarily due to the limitations of existing models in capturing multiscale temporal dependencies and effectively integrating external data. To address these issues, we propose MSP-EDA, a novel multivariate time series forecasting framework that integrates multiscale patching and external data enhancement. Specifically, MSP-EDA utilizes the Discrete Fourier Transform (DFT) to extract dominant global periodic patterns and employs an adaptive Continuous Wavelet Transform (CWT) to capture scale-sensitive local variations. In addition, multiscale patches are constructed to capture temporal patterns at different resolutions, and a specialized encoder is designed for each scale. Each encoder incorporates temporal attention, channel correlation attention, and cross-attention with external data to capture intra-scale temporal dependencies, inter-variable correlations, and external influences, respectively. To fuse information from different temporal scales, we introduce a trainable global token that serves as a variable-wise aggregator across scales. Extensive experiments on four public benchmark datasets and three real-world vector database datasets that we collect demonstrate that MSP-EDA consistently outperforms state-of-the-art methods, achieving particularly notable improvements on vector database workloads. Ablation studies further confirm the effectiveness of each module and the adaptability of MSP-EDA to complex forecasting scenarios involving external dependencies. Full article

This study presents an integrated experimental and theoretical investigation of two pharmacologically significant neolignans—magnolol and honokiol—with the aim of characterizing their structural and spectroscopic properties in detail. Experimental Fourier-transform infrared (FT-IR), ultraviolet–visible (UV-Vis), and nuclear magnetic resonance (¹H NMR) spectra were recorded and analyzed. To support and interpret these findings, a series of density functional theory (DFT) and time-dependent DFT (TD-DFT) calculations were conducted using several hybrid and long-range corrected functionals (B3LYP, CAM-B3LYP, M06X, PW6B95D3, and ωB97XD). Implicit solvation effects were modeled using the CPCM approach across a variety of solvents. The theoretical spectra were systematically compared to experimental data to determine the most reliable computational approaches. Additionally, natural bond orbital (NBO) analysis, molecular electrostatic potential (MEP) mapping, and frontier molecular orbital (FMO) visualization were performed to explore electronic properties and reactivity descriptors. The results provide valuable insight into the structure–spectrum relationships of magnolol and honokiol and establish a computational benchmark for further studies on neolignan analogues. Full article

This study introduces a newly synthesized Co(II) phthalocyanine complex (Co-Pc, 4) incorporating two (mercapto-terphenyl)thio-dione substituents, along with a detailed exploration of its structural, spectroscopic, and binding characteristics. The key precursor, 4-[(4′′-mercapto-[1,1′:4′,1′′-terphenyl]-4-yl)thio]phthalonitrile (compound 3), was first obtained and subsequently used to construct the phthalocyanine macrocycle through cyclotetramerization in the presence of cobalt and zinc salts under heat and vacuum in dimethylformamide. The resulting compounds (3 and 4) were characterized using a comprehensive array of analytical techniques, including elemental analysis, UV–Vis spectroscopy, FT-IR, ¹H-NMR, and Q-TOF mass spectrometry. Additionally, density functional theory (DFT) and time-dependent DFT (TD-DFT) calculations were employed to elucidate the electronic structure and geometrical features of Co-Pc 4, providing theoretical support for the experimental findings. The integration of theoretical and experimental findings provides in-depth insight into the electronic behavior and reactivity of compound 4, highlighting its promise as a candidate for photovoltaic applications. Further studies may investigate how structural modifications influence these properties, potentially leading to improved device performance. Full article

This study presents comprehensive DFT calculations to determine the structural, electronic, mechanical, and optical properties of the Ruddlesden–Popper Phase family member, La₂XO₄, which has an orthorhombic crystal structure with a Cmce space group. Ultrasoft pseudopotential plane wave and PBE-GGA approaches have been implemented using the CASTEP tool. The exchange–correlation approximation calculations show that the La₂XO₄ (where X = Ni, Fe, Ba, and Pb) compounds possess no band gap. The results indicate that the compounds are metallic, which are ideal for supercapacitor (SC) applications. The compound’s optical conductivity, dielectric function, extinction coefficients, absorption refractive index, loss function, and reflectivity are also analyzed for SC applications. UV spectra of the compounds observed high absorption coefficient (10⁵ cm⁻¹), dielectric function (9–10), optical conductivity (7 fs⁻¹), and refractive index (4) values. Furthermore, as B/G > 1.75, the mechanical (elastic) properties have shown ductile behavior and mechanical stability. Using the Born stability criteria, the mechanical stability of the compounds is examined. All of the compounds are ductile, according to Pugh’s and Frantesvich ratios. Finally, time-simulations-dependent temperature stability plots for the compounds are computed by employing dynamical stability with norm-conserved pseudopotential, which confirm their potential for SC applications. Full article

Five boron-centered spiro compounds with imidazo[1,5-a]pyridin-3-yl phenols as ligands were synthesized and thoroughly characterized through ¹H-NMR, ¹³C-NMR, infrared spectroscopy, and X-ray single crystal analysis. The fluorescence properties of these compounds in solution and in the solid state were investigated, revealing blue emission with wavelengths maxima dependent on the electronic properties of the substituents on the ligands in solution, and an orange-red emission in the solid state. Time-Dependent Density Functional Theory (TD-DFT) calculations were performed to describe the nature of the transitions Full article

Background/Objectives: D-lysergic acid diethylamide (D-LSD) is under investigation as a potential therapeutic strategy for alcohol use disorder (AUD). However, the extreme light sensitivity of D-LSD presents a significant challenge in developing suitable pharmaceutical forms, particularly for clinical trial settings. This study proposes a liquid-filled capsule formulation designed to provide accurate dosing while protecting D-LSD from photodegradation. Methods: To support formulation development and ensure its suitability as an investigational medicinal product, a multi-tiered analytical strategy was employed. This included liquid chromatography coupled with ion mobility spectrometry and mass spectrometry (LC-IM-MS), along with quantum chemical calculations (density functional theory (DFT) and time dependent-DFT (TD-DFT)), to ensure robust and orthogonal structural characterization of degradation products. Results: Photostress studies demonstrated that while D-LSD in solution rapidly degrades into photoisomers and photooxidative byproducts, the capsule formulation markedly mitigates these transformations under ICH-compliant conditions. Conclusions: These findings highlight the essential role of orthogonal stability profiling in guiding formulation development and demonstrate that this approach may offer a viable, photostable platform for future clinical investigation of D-LSD in the treatment of AUD. Full article

Background/Objective: Avapritinib is an orally bioavailable tyrosine kinase inhibitor and was approved by the FDA in 2020 for gastrointestinal stromal tumor treatments. Although avapritinib is known to be chiral, its stereochemistry was initially established randomly. This study aims to develop a definitive method for determining avapritinib’s absolute configuration and propose a universal methodology for stereochemical characterization of flexible chiral drugs. Methods: The absolute configuration of avapritinib was determined through an integrated approach combining chiral resolution, chiroptical spectroscopy and synthetic validation. Enantiomeric separation was achieved via chiral liquid chromatography, followed by comprehensive chiroptical characterization including electronic circular dichroism (ECD), specific optical rotation and optical rotatory dispersion. Conformational analysis and density functional theory (DFT) calculations correlated experimental spectra with theoretical predictions, facilitating definitive configurational assignment. The stereochemical determination were further verified through ECD derivatization and chemical synthesis. Finally, the enantiomers’ kinase inhibition profiles against c-KIT D816V were quantitatively assessed. Results: Two enantiomers of avapritinib were resolved via chiral HPLC and a Chiralpak IG column. Through combined experimental ECD spectra and time-dependent DFT calculations employing the core extraction method, the levo-isomer was unambiguously determined as S configuration. This stereochemical assignment was confirmed by p-cyanobenzaldehyde derivatization and de novo synthesis. Biological evaluation revealed (S)-(−)-avapritinib exhibited superior c-KIT D816V inhibitory activity compared to its (R)-(+)-counterpart, a finding corroborated by molecular docking studies elucidating their differential target interactions. Conclusions: This study advances avapritinib stereochemical understanding and establishes a definitive protocol for its absolute configuration assignment, serving as a paradigm for flexible chiral drug characterization. Full article

The impact of photoisomerization on antioxidant properties holds significant implications for fields such as medicine, chemistry, and consumer products. This investigation employs multistate complete active space second-order perturbation theory (MS-CASPT2), complemented by density functional theory (DFT) and time-dependent DFT (TD-DFT) methods, to examine the photoisomerization behavior of sinapic acid (SA) and methyl sinapate (MS) under ultraviolet (UV) irradiation, while systematically analyzing their antioxidant properties in the S₁ state. The computational results, validated by two independent theoretical approaches, confirm that both SA and MS can undergo photoisomerization through conical intersection pathways, providing crucial insights into their non-radiative transition mechanisms. In the S₀ state, cis-SA and cis-MS exhibit higher antioxidant activity, while in the S₁ state, antioxidant performance is strongly solvent-dependent: trans-SA outperforms in ethyl acetate (Eac) and water, whereas cis-SA is more effective in methanol (MeOH). Notably, the natural population analysis (NPA) charges of all four compounds increase upon photoexcitation, suggesting that photoexcitation enhances antioxidant properties. This study addresses a critical gap in our understanding of the relationship between photoisomerization and antioxidant activity in natural phenolic compounds. Full article

The chemical interaction of salicylic acid, formaldehyde, and sulfuric acid produced a disalicylic ligand (3,3′-dicarboxy-2,2′-dihydroxydiphenylmethane, DCM), which was then allowed to coordinate with copper (II) ions. The solid compounds’ chemical structures were determined using elemental analysis, UV-Vis, FT-IR, MS, ¹H-NMR, PXRD, SEM, TEM, magnetic studies, as well as molecular modeling based on DFT (density functional theory) calculations. It was proposed that the ligand coordinates in a tetradentate fashion with the copper ion to give a square-planar binuclear complex. A significant difference in the diffraction patterns between Cu(II)–DCM (amorphous) and DCM (crystalline) was displayed using an X-ray diffraction analysis. Spherical granules were identified throughout through morphology analysis using SEM and TEM. UV-Vis spectra were used to quantify the optical characteristics such as the energy gap, optical conductivity, refractive index, and penetration depth. The band gap values that lie within the semiconductor region suggested that the compounds could be used for electronic applications. The optimized structure of the synthesized Cu(II)–DCM complex was investigated using DFT and TD-DFT (time-dependent density functional theory) at the B3LYP/6-31G(d, p) level, with the LANL2DZ basis set for Cu in an ethanol solvent and the gas environment modeled by CPCM. The experimental data suggest a square-planar geometry of the Cu(II) binuclear complex. The theoretical calculations support the proposed structure of the compound. The cytotoxicity of the DCM against HCT–116 (human colon cancer) cells was tested, and the outcome exhibited good inhibitions of growth. A molecular docking (MD) examination was carried out to illustrate the binding mode/affinity of the prepared compounds (DCM and Cu(II)–DCM) in the active site of the receptor protein [CDK2 enzyme, PDB ID: 6GUE]. The compounds formed hydrogen bonds with the amino acid residues of the protein, increasing the binding affinity from −7.2 to −9.3 kcal/mol through the coordination process. The information from this current study, particularly the copper complex, is beneficial for exploring new compounds that have anticancer potential. Full article

Organic violet-blue fluorescent materials have garnered significant interest for a broad spectrum of applications. A series of triazine-based molecules, that is, 2,4,6-tri(9H-carbazol-9-yl)-1,3,5-triazine (TCZT), 2,4,6-tri(1H-indol-1-yl)-1,3,5-triazine (TIDT), and 2,4,6-tris(3,6-di-tert-butyl-9H-carbazol-9-yl)-1,3,5-triazine (TDBCZT), exhibiting violet-blue emission were synthesized via a catalyst-free aromatic nucleophilic substitution reaction. These compounds possess a non-planar and twisted structure with favorable charge-transfer characteristics, demonstrating excellent thermal stability (decomposition temperatures of 370 °C, 384 °C, and 230 °C, respectively). Cyclic voltammetry analysis, combined with time-dependent density functional theory (TD-DFT) calculations at the B3LYP/6-31G(d) level, offered detailed insights into their electronic structures and electrochemical properties. Optical properties were systematically characterized using Ultraviolet–visible (UV–Vis) absorption and photoluminescence (PL) spectroscopy. The compounds exhibited violet-blue luminescence with emission peaks located at 397 nm, 383 nm, and 402 nm in toluene, respectively. In their respective films, the compounds exhibited varying degrees of spectral shifts, with emission peaks at 408 nm, 381 nm, and 369 nm. Moreover, the CIE (Commission Internationale de l’Éclairage) coordinates of TIDT in toluene were (0.155, 0.067), indicative of excellent violet purity. These compounds demonstrated significant two-photon absorption (TPA) properties, with cross-sections of 4.6 GM, 15.3 GM, and 7.4 GM, respectively. Notably, they exhibited large molar absorptivities and substantial photoluminescence quantum yields (PLQYs), suggesting their potential for practical applications as violet-blue fluorescent materials. Full article