Search Results (15)

Genu valgum (GV) is a common lower limb deformity that may increase the risk of anterior cruciate ligament (ACL) injury. This study used OpenSim musculoskeletal modeling and kinematic analysis to investigate the mechanical responses of the ACL under fatigue in females with GV. Eight females with GV and eight healthy controls completed a running-induced fatigue protocol. Lower limb kinematic and kinetic data were collected and used to simulate stress and strain in the anteromedial ACL (A–ACL) and posterolateral ACL (P–ACL) bundles, as well as peak joint angles and knee joint stiffness. The results showed a significant interaction effect between group and fatigue condition on A–ACL stress. In the GV group, A–ACL stress was significantly higher than in the healthy group both before and after fatigue (p < 0.001) and further increased following fatigue (p < 0.001). In the pre-fatigued state, A–ACL strain was significantly higher during the late stance phase in the GV group (p = 0.036), while P–ACL strain significantly decreased post-fatigue (p = 0.005). Additionally, post-fatigue peak hip extension and knee flexion angles, as well as pre-fatigue knee abduction angles, showed significant differences between groups. Fatigue also led to substantial changes in knee flexion, adduction, abduction, and hip/knee external rotation angles within the GV group. Notably, knee joint stiffness in this group was significantly lower than in controls and decreased further post-fatigue. These findings suggest that the structural characteristics of GV, combined with exercise-induced fatigue, exacerbate A–ACL loading and compromise knee joint stability, indicating a higher risk of ACL injury in fatigued females with GV. Full article

Background: The open-stance forehand is a fundamental technique in tennis, playing a crucial role in competitive performance. Its execution depends heavily on lower limb coordination and neuromuscular control. Athletes of different skill levels often display distinct muscle activation strategies. This study employs non-negative matrix factorization (NMF) to analyze lower limb muscle synergy patterns during the forehand open stance across skill levels and explores their potential influence on stroke performance. Methods: A total of 30 tennis players, including 15 elite and 15 amateur athletes, participated in this study. Surface electromyography (sEMG) was used to record the activity of major lower limb muscles during the forehand open stance. Muscle synergy patterns were extracted using NMF, and K-means clustering was applied to classify synergy patterns. Independent sample t-tests were conducted to examine differences between muscle synergies. Results: Significant differences (p < 0.05) were observed in the spatial characteristics of each synergy component across different movement phases. However, temporal characteristics showed a significant difference only in Syn2 during the mid-phase of the backswing (BS) (56.2–60.4%) (p = 0.033). Conclusions: Elite athletes exhibited more optimized and stable muscle activation patterns, enabling more efficient coordination of major muscle groups. Based on sEMG decomposition and muscle synergy analysis, these activation patterns may contribute to improved stroke efficiency and energy transfer and potentially reduce the risk of sports-related injuries. Full article

The kinematic and kinetic performance of tennis players differs across skill levels, with joint range of motion (ROM), moments, and stiffness being strongly linked to injury risk. Focusing on the biomechanical characteristics of lower-limb joints throughout the landing stage, especially among athletes of different skill levels, aids in understanding the link between injury risk and performance level. This study recruited 15 male campus tennis enthusiasts and 15 male professional tennis players. The kinematic and kinetic differences between amateur and professional players during the landing phase of the tennis serve were analyzed using SPM1D 0.4.11 and SPSS 27.0.1, with independent-sample t-tests applied in both cases. Throughout the tennis serve’s landing stage, the professional group exhibited significantly greater sagittal plane hip-joint stiffness (p < 0.001), horizontal plane moment (59~91%; p = 0.036), and a significantly higher peak moment (p = 0.029) in comparison with the amateur group. For the knee joint, the professional group exhibited significantly larger ROM in flexion–extension (0~82%; p = 0.003); along with greater ROM (0~29%; p = 0.042), moment (12~100%; p < 0.001), peak moment (p < 0.001) in adduction-abduction; and internal–external rotational moments (19~100%; p < 0.001) were markedly higher. The professional group showed significantly higher ankle joint ROM (p < 0.001) and moments (6~74%; p = 0.004) in the sagittal plane, as well as greater horizontal-plane ROM (27~67%; p = 0.041) and peak moments (p < 0.001). Compared with amateur tennis players, professional tennis players exhibit greater ROM, joint moments, and stiffness in specific planes, potentially increasing their risk of injury during the landing phase. Full article

(1) Background: The pull-up jump shot is a commonly used scoring technique in basketball. This study aimed to investigate the biomechanical effects of knee brace stiffness on knee joint mechanics during the pull-up jump shot in female basketball players and to evaluate the potential risk of non-contact anterior cruciate ligament (ACL) injuries associated with different stiffness levels. (2) Methods: Sixty-six female basketball players performed pull-up jump shot drills while kinematic and kinetic data were collected using a Vicon motion capture system and a Kistler ground reaction force (GRF) plate. (3) Results: A one-way analysis of variance (ANOVA) revealed that both low-stiffness and high-stiffness knee braces significantly reduced knee flexion angles (p = 0.001) but increased indirect contact forces in the sagittal plane (p < 0.01). Notable differences were observed between low-stiffness and high-stiffness braces, as well as between braced and unbraced conditions. However, no significant differences were detected between the effects of low-stiffness and high-stiffness braces. (4) Conclusions: Athletes should select knee braces based on the intensity of competition and training, and those with ACL concerns should opt for high-stiffness knee braces for enhanced joint stability. Full article

To compare the efficacy of different recovery strategies (sitting; cold water immersion, CWI; vibration foam rolling, VFR) on the lower extremities of amateur basketball players after the simulated load of a basketball game, we assessed the power, agility, and dynamic balance before and after interventions. Ten amateur basketball players alternately underwent 12 min of sitting, 12 min of CWI at 5 °C, and 12 min of VFR. The power, agility, and dynamic balance were measured immediately post-warm-up, immediately post-game, immediately post-intervention, 1 h after interventions, and 24 h after interventions. To simulate the load of a basketball game, specific movements were designed and implemented. Jump height was measured using a Kistler force plate. Reaction time and dynamic balance score were assessed using the Pavigym agility response system and the Y balance test, respectively. The data were analyzed with a two-way repeated measures analysis of variance (ANOVA). The results showed that the vertical jump height significantly decreased after the CWI intervention compared to the CON and VFR groups (p < 0.001). At 1 h after the intervention, the vertical jump height in the CON group showed delayed recovery compared to the CWI and VFR groups (p = 0.007; p < 0.001). At 24 h after the intervention, the vertical jump height in the CWI group further increased and was significantly different from the CON and VFR groups (p < 0.001; p = 0.005). Additionally, reaction times significantly increased immediately after the CWI intervention (p = 0.004) but showed further recovery at 24 h compared to the CON group (p < 0.001). The dynamic balance score significantly rebounded after the CWI intervention compared to the CON group (p = 0.021), with further improvement at 24 h (p < 0.001). CWI initially showed negative effects, but over time, its recovery effect was superior and more long-lasting. VFR had the best immediate effect on lower limb recovery after the game. Full article

This study compares foot–ankle temporal kinematics characteristics during planned and unplanned gait termination (PGT and UGT) in subjects with different arch stiffnesses (ASs) based on the statistical nonparametric mapping (SnPM) method. By measuring three-dimensional arch morphological parameters under different loading conditions, 28 healthy male subjects were classified and participated in gait termination (GT) tests to collect metatarsophalangeal (MTP) and ankle-joint kinematics data. The two-way repeated-measures ANOVA using SnPM was employed to assess the impacts of AS on foot–ankle kinematics during PGT and UGT. Our results show that joint angles (MTP and ankle joints) were altered owing to AS and GT factors. The flexible arches hahadve periods of significantly greater MTP and ankle joint angles than those of stiff arches during the stance phase of GT, whereas subjects exhibited significantly smaller ankle and MTP joint angles during UGT. These results add additional insights into the morphological arch biomechanical function, and the comprehensive compensatory adjustment of lower-limb joints during gait stopping caused by unplanned stimulation. Full article

Nowadays, footwear serves an essential role in improving athletic performance and decreasing the risk of unexpected injuries in sports games. Finite element (FE) modeling is a powerful tool to reveal the biomechanical interactions between foot and footwear, and establishing a coupled foot-shoe model is the prerequisite. The purpose of this pilot study was to develop and validate a 3D FE coupled model of the foot and sports shoe complex during balanced standing. All major foot and shoe structures were constructed based on the participant’s medical CT images, and 3D gait analysis was conducted to define the loading and boundary conditions. Sensitivity analysis was applied to determine the optimum material property for shoe sole. Both the plantar and shoe sole areas were further divided into four regions for model validation, and the Bland–Altman method was used for consistency analysis between methods. The simulated peak plantar and sole pressure distribution showed good consistency with experimental pressure data, and the prediction errors were all less than 10% during balanced standing with only two exceptions (medial and lateral forefoot regions). Meanwhile, the Bland–Altman analysis demonstrated a good agreement between the two approaches. The sensitivity analysis suggested that shoe sole with Young’s modulus of 2.739 MPa presented the greatest consistency with the measured data in our scenario. The established model could be used for investing the complex biomechanical interactions between the foot and sports shoe and optimizing footwear design, after it has been fully validated in the subsequent works under different conditions. Full article

Although various sports footwear demonstrated marked changes in running biomechanical variables, few studies have yielded definitive findings on the underlying mechanisms of shoe constructions affecting running-related performance and injuries. Therefore, this study focused on examining the effect of basic shoe constructions on running biomechanics and assessing the current state of sports shoe production in terms of injury and efficiency. Relevant literature was searched on five databases using Boolean logic operation and then screened by eligibility criteria. A total of 1260 related articles were retrieved in this review, and 41 articles that met the requirements were finally included, mainly covering the influence of midsole, longitudinal bending stiffness, heel-toe drop, shoe mass, heel flare, and heel stabilizer on running-related performance and injuries. The results of this review study were: (1) The functional positioning of running shoe design and the target groups tend to influence running performance and injury risk; (2) Thickness of 15–20 mm, hardness of Asker C50-C55 of the midsole, the design of the medial or lateral heel flares of 15°, the curved carbon plate, and the 3D printed heel cup may be beneficial to optimize performance and reduce running-related injuries; (3) The update of research and development concepts in sports biomechanics may further contribute to the development of running shoes; (4) Footwear design and optimization should also consider the influences of runners’ strike patterns. Full article

The aim of this study was to assess the stiffness of each lower limb joint in healthy persons walking at varying speeds when fatigued. The study included 24 subjects (all male; age: 28.16 ± 7.10 years; height: 1.75 ± 0.04 m; weight: 70.62 ± 4.70 kg). A Vicon three-dimensional analysis system and a force plate were used to collect lower extremity kinematic and kinetic data from the participants before and after walking training under various walking situations. Least-squares linear regression equations were utilized to evaluate joint stiffness during single-leg support. Three velocities significantly affected the stiffness of the knee and hip joint (p < 0.001), with a positive correlation. However, ankle joint stiffness was significantly lower only at maximum speed (p < 0.001). Hip stiffness was significantly higher after walking training than that before training (p < 0.001). In contrast, knee stiffness after training was significantly lower than pre-training stiffness in the same walking condition (p < 0.001). Ankle stiffness differed only at maximum speed, and it was significantly higher than pre-training stiffness (p < 0.001). Walking fatigue appeared to change the mechanical properties of the joint. Remarkably, at the maximum walking velocity in exhaustion, when the load on the hip joint was significantly increased, the knee joint’s stiffness decreased, possibly leading to joint instability that results in exercise injury. Full article

As a simple and beneficial way of exercise, rope skipping is favored by the majority of teenagers, but incorrect rope skipping may lead to the risk of injury. In this study, 16 male adolescent subjects were tested for bounced jump skipping and alternating jump rope skipping. The kinematic data of the hip, knee, ankle and metatarsophalangeal joint of lower extremities and the kinetics data of lower extremity touching the ground during rope skipping were collected, respectively. Moreover, the electromyography (EMG) data of multiple muscles of the lower extremity were collected by Delsys wireless surface EMG tester. Results revealed that bounced jump (BJ) depicted a significantly smaller vertical ground reaction force (VGRF) than alternate jump (AJ) during the 11–82% of the ground-contact stage (p < 0.001), and the peak ground reaction force and average loading rate were significantly smaller than AJ. From the kinematic perspective, in the sagittal plane, when using BJ, the flexion angle of the hip joint was comparably larger at 12–76% of the ground-contact stage (p < 0.01) and the flexion angle of the knee joint was significantly larger at 13–72% of the ground-contact stage (p < 0.001). When using two rope skipping methods, the minimum dorsal extension angle of the metatarsophalangeal joint was more than 25°, and the maximum was even higher than 50°. In the frontal plane, when using AJ, the valgus angle of the knee joint was significantly larger during the whole ground-contact stage (p < 0.001), and the adduction angle of the metatarsophalangeal joint (MPJ) was significantly larger at 0–97% of the ground-contact stage (p = 0.001). EMG data showed that the standardized value of root mean square amplitude of the tibialis anterior and gastrocnemius lateral head of BJ was significantly higher than AJ. At the same time, that of semitendinosus and iliopsoas muscle was significantly lower. According to the above results, compared with AJ, teenagers receive less GRF and have a better landing buffer strategy to reduce load, and have less risk of injury during BJ. In addition, in BJ rope skipping, the lower limbs are more inclined to the calf muscle group force, while AJ is more inclined to the thigh muscle group force. We also found that in using two ways of rope skipping, the extreme metatarsophalangeal joint back extension angle could be a potential risk of injury for rope skipping. Full article

Objective: The efficacy of arch orthoses in posture adjustment and joint coordination improvement during steady-state gait is well documented; however, the biomechanical changes of gait sub-tasks caused by arch support (AS), especially during gait termination, are poorly understood. Hence, this study aimed to investigate how the acute arch-supporting intervention affects foot–ankle coordination and coordination variability (CV) in individuals with flatfoot during unplanned gait termination (UGT). Methods: Twenty-five male patients with flatfoot were selected as subjects participated in this AS manipulation study. A motion capture system was used for the collection of the metatarsophalangeal joint (MPJ) and ankle kinematics during UGT. MPJ-Ankle coordination and CV were quantified using an optimized vector coding technique during the three sub-phases of UGT. A paired-sample t-test from the one-dimensional statistical parametric mapping of one-dimensional was applied to examine the data significance. Results: Significant differences for the joint kinematics between non-arch-support (NAS) and AS were exhibited only in the MPJ transverse plane during the middle and later periods of UGT (p = 0.04–0.026). Frontal plane MPJ-ankle coordination under AS during stimulus delay significantly decreased from 177.16 ± 27.41° to 157.75 ± 32.54° compared with under NAS (p = 0.026); however, the coordination pattern had not changed. Moreover, no significant difference was found in the coupling angle variability between NAS and AS in three planes during sub-phases of UGT (all p > 0.5). Conclusions: The detailed intrinsic characteristic of AS induced acute changes in lower extremity segment coordination in patients with mild flatfoot has been recorded. This dataset on foot-ankle coordination characteristics during UGT is essential for explaining foot function and injury prediction concerning AS manipulation. Further studies are expected to reflect lower limb inter-joint coordination during gait termination through the long-term effects of AS orthoses. Full article

Although values of arch stiffness index (ASI) have been used to evaluate arch structure and injury susceptibility, investigations are limited regarding the influence of ASI on biomechanical characteristics during gait termination, which involves a challenging balance transition from walking to standing. This study aimed to explore plantar pressure distribution and lower extremity joint kinematic differences between individuals with both a stiff and flexible arch (SA and FA, respectively) during planned and unplanned gait termination (PGT and UGT, respectively). Following the calculation of ASI, sixty-five asymptomatic male subjects were classified and participated in two types of gait termination tests to acquire kinematic and plantar pressure data. Parameters were compared between SA and FA using a two-way ANOVA during PGT and UGT, respectively. UGT was found to have a larger range of motion on the hip joint in the sagittal plane and the knee joint in the transverse plane when compared with PGT. The differences in the kinematic characteristics of the lower limb joints caused by the difference in arch stiffness are mainly concentrated in the ankle and metatarsophalangeal joints. Plantar pressure data, represented by the maximum pressure, showed significant differences in the forefoot and rearfoot areas. These results suggest that ASI could change freedom of motion of the lower limb joints, and UGT tends to conduct a compensatory adjustment for the lower extremity kinetic chain. An understanding of the biomechanical characteristics of arch structures may provide additional insights into foot function and injury prediction during gait termination. Full article

Volleyball players often land on a single leg following a spike shot due to a shift in the center of gravity and loss of balance. Landing on a single leg following a spike may increase the probability of non-contact anterior cruciate ligament (ACL) injuries. The purpose of this study was to compare and analyze the kinematics and kinetics differences during the landing phase of volleyball players using a single leg (SL) and double-leg landing (DL) following a spike shot. The data for vertical ground reaction forces (VGRF) and sagittal plane were collected. SPM analysis revealed that SL depicted a smaller knee flexion angle (about 13.8°) and hip flexion angle (about 10.8°) during the whole landing phase, a greater knee and hip power during the 16.83–20.45% (p = 0.006) and 13.01–16.26% (p = 0.008) landing phase, a greater ankle plantarflexion angle and moment during the 0–41.07% (p < 0.001) and 2.76–79.45% (p < 0.001) landing phase, a greater VGRF during the 5.87–8.25% (p = 0.029), 19.75–24.14% (p = 0.003) landing phase when compared to DL. Most of these differences fall within the time range of ACL injury (30–50 milliseconds after landing). To reduce non-contact ACL injuries, a landing strategy of consciously increasing the hip and knee flexion, and plantarflexion of the ankle should be considered by volleyball players. Full article

Backward jump-landing during sports performance will result in dynamic postural instability with a greater risk of injury, and most research studies have focused on forward landing. Differences in kinematic temporal characteristics between single-leg and double-leg backward jump-landing are seldom researched and understood. The purpose of this study was to compare and analyze lower extremity kinematic differences throughout the landing phases of forward and backward jumping using single-leg and double-leg landings (FS and BS, FD and BD). Kinematic data were collected during the landing phases of FS and BS, FD and BD in 45 participants. Through statistical parametric mapping (SPM) analysis, we found that the BS showed smaller hip and knee flexion and greater vertical ground reactive force (VGRF) than the FS during 0–37.42% (p = 0.031), 16.07–32.11% (p = 0.045), and 23.03–17.32% (p = 0.041) landing phases. The BD showed smaller hip and knee flexion than the FD during 0–20.66% (p = 0.047) and 0–100% (p < 0.001) landing phases. Most differences appeared within a time frame during the landing phase at 30–50 ms in which non-contact anterior cruciate ligament (ACL) injuries are thought to occur and are consistent with the identification of risk in biomechanical analysis. A landing strategy that consciously increases the knee and hip flexion angles during backward landing should be considered for people as a measure to avoid injury during the performance of this type of physical activity. Full article

The purpose of this study was to determine relationships between arch stiffness and relative regional impulse during walking, running, and stopping. A total of 61 asymptomatic male subjects volunteered to participate in the study. All were classified by calculating the arch stiffness index using 3-dimensional foot morphological scanning. Plantar pressure distribution data were collected from participants using a Footscan pressure platform during gait tests that included walking, running, and gait termination. The stiff arches group (n = 19) and flexible arches group (n = 17) were included in the following data analysis. The results suggested that subjects with stiffer arches had a larger and smaller percentage of plantar impulse in the forefoot and rearfoot, respectively, than subjects with more flexible arches during walking and running. However, during gait termination, which included planned and unplanned gait stopping, the plantar impulse distribution pattern was found to be reversed. The current findings demonstrate that the distributional changes of plantar loading follow unidirectional transfer between the forefoot and the rearfoot on the plantar longitudinal axis. Moreover, the patterns of impulse distribution are also different based on different gait task mechanisms. Full article