Search Results (46)

Background/Objectives: The objective of this study was to analyze the profiles of sphingosine (Sph), sphinganine (SPA), sphingosine-1-phosphate (S1P), and ceramides (C14 Cer, C16 Cer, C18:1 Cer, C18 Cer, C20 Cer, C22 Cer, C24:1 Cer, and C24 Cer), along with caspases (CAS-3, CAS-6, and CAS-9), in serum and in the periosteum of the maxilla and mandible in patients with dentofacial deformities undergoing treatment with titanium fixations (miniplates and miniscrews). Methods: The study group comprised 20 patients who underwent bilateral jaw osteotomy due to dentofacial deformities. The osteotomy segments were stabilized with titanium alloy miniplates and screws. The control group consisted of 20 patients who had not yet received surgical treatment for maxillofacial defects. Results: Sphinganine (SPA) and ceramide C22 (C22 Cer) were the only compounds found to be significantly elevated in the serum of the study group compared to the control group. The concentrations of Sph, SPA, C14 Cer, C16 Cer, C18 1 Cer, C18 Cer, C22 Cer, C24 1 Cer, C24 Cer, and S1P were significantly lower in the maxillary periosteum of patients in the study group compared to those in the control group. The concentration of C20 Cer was significantly higher in the maxillary periosteum of patients in the study group compared to the control group. In contrast, the concentrations of Sph, SPA, C14 Cer, C16 Cer, C18 1 Cer, C22 Cer, C24 1 Cer, and C24 Cer were significantly lower in the mandibular periosteum of the study group compared to the control group. The concentrations of C20 Cer and S1P were significantly elevated in the mandibular periosteum of patients in the study group compared with the control group. The activity of CAS-3 was significantly higher in the mandibular periosteum of patients in the study group compared to those in the control group. Conclusions: Titanium fixations induce local changes in the sphingolipid profile within the periosteum of the maxilla and mandible, while no systemic impact on this metabolism was observed. Full article

Mental illnesses can have a significant impact on individuals experiencing acute coronary syndromes (ACS). Mental illnesses are associated with an increased cardiovascular risk profile and early onset of cardiovascular disease. A critical aspect of this interplay is the effect of psychiatric conditions on left ventricular ejection fraction (LVEF), a key parameter in evaluating cardiac function and predicting long-term outcomes in ACS patients. The present single-center, retrospective study investigated the associations between psychiatric conditions and cardiac function, with a focus on LVEF in ACS patients. The inclusion criteria were Italian nationality and 30 years or older. One hundred and sixty-four patients without (M_age = 68.8 ± 10.6, 62 females) and 161 patients with a psychiatric diagnosis (M_age = 68.4 ± 13.7, 63 females) were enrolled. The data collected included sociodemographic variables, psychiatric diagnoses, LVEF, ACS type (STEMI/NSTEMI), smoking status, previous interventions, and pharmacological treatments. Statistical analyses included chi-square, t-tests, ANOVAs, and ANCOVA to assess differences across groups. Findings revealed lower LVEF in patients with a psychiatric diagnosis compared to patients without a psychiatric diagnosis (p = 0.004, d = 0.36). Patients without a psychiatric diagnosis were associated with NSTEMI (p = 0.047, φ = 0.11), hypertension (p = 0.003, φ = −0.16), and dyslipidemia (p = 0.022, φ = −0.13). In contrast, patients with a psychiatric diagnosis were associated with STEMI (p = 0.047, φ = 0.11), neurological dysfunction (p = 0.014, φ = 0.14), and chronic obstructive pulmonary disease (p = 0.010, φ = 0.14). Among psychiatric diagnoses, anxiety disorders were associated with lower LVEF compared to substance abuse disorders (p = 0.012, d = −0.81). The findings underscore the complex relationship between mental illness and cardiac function, emphasising the need to integrate psychiatric evaluations into cardiology care to optimise the management of both mental and cardiovascular health. This study has several limitations, including its design, which prevents causal conclusions, and the use of convenience sampling, which limits the generalizability of the findings. Full article

Background: Hormonal, vascular, and behavioral changes during pregnancy can negatively impact a woman’s oral health, resulting in conditions such as gingivitis, dental sensitivity, and caries. Although oral health is critical during pregnancy, it remains frequently overlooked. In this study, the oral health status and hygiene practices of pregnant women attending two university hospitals in southern Italy were evaluated. Methods: A cross-sectional cohort study was conducted with 72 pregnant women. Data were collected through an anonymous questionnaire that evaluated oral hygiene habits, dental visits, and oral pathologies, followed by a clinical examination. The examination included the assessment of the Decayed, Missing, Filled Teeth (DMFT) index and the Oral Hygiene Index (OHI) scores. Results: Among the participants, 61% were in their 9th month of pregnancy. The mean DMFT score was 7.9, and the mean OHI score was 3.6. Only 19.4% of participants had visited a dentist in the past 6 months, while 97.2% reported brushing their teeth just once per day. Gingival bleeding was reported by 72.2% of the women, and 38.9% experienced dental sensitivity, with both conditions worsening during pregnancy. Conclusions: The need for greater oral hygiene education and regular dental care during pregnancy is highlighted in this study. Integrating oral health maintenance into prenatal care programs is essential for preventing pregnancy-related oral diseases and promoting maternal and fetal well-being. Full article

Artificial intelligence (AI), specifically Generative Pre-trained Transformer (GPT) technology, has revolutionized various fields, including medicine and dentistry. The AI model ChatGPT, developed by OpenAI, mimics human language on a large scale, generating coherent and contextually appropriate responses. ChatGPT serves as an auxiliary resource for diagnosis and decision-making across various medical disciplines. This comprehensive narrative review aims to explore how ChatGPT can assist the dental sector, highlighting its potential to enhance various aspects of the discipline. This review includes a literature search on the application of ChatGPT in dentistry, with a focus on the differences between the free version, ChatGPT 3.5, and the more advanced subscription-based version, ChatGPT 4. Specifically, ChatGPT has proven to be effective in enhancing user interaction, providing fast and accurate information and improving the accessibility of knowledge. However, despite these advantages, several limitations are identified, including concerns regarding the accuracy of responses in complex scenarios, ethical considerations surrounding its use, and the need for improved training to handle highly specialized queries. In conclusion, while ChatGPT offers numerous benefits in terms of efficiency and scalability, further research and development are needed to address these limitations, particularly in areas requiring greater precision, ethical oversight, and specialized expertise. Full article

Background: Augmented reality (AR) enhances sensory perception by adding extra information, improving anatomical localization and simplifying treatment views. In dentistry, digital planning on bidimensional screens lacks real-time feedback, leading to potential errors. However, it is not clear if AR can improve the clinical treatment precision. The aim of this research is to evaluate if the use of AR-based instruments could improve dental procedure precision. Methods: This review covered studies from January 2018 to June 2023, focusing on AR in dentistry. The PICO question was “Does AR increase the precision of dental interventions compared to non-AR techniques?”. The systematic review was carried out on electronic databases, including Ovid MEDLINE, PubMed, and the Web of Science, with the following inclusion criteria: studies comparing the variation in the precision of interventions carried out with AR instruments and non-AR techniques. Results: Thirteen studies were included. Conclusions: The results of this systematic review demonstrate that AR enhances the precision of various dental procedures. The authors advise clinicians to use AR-based tools in order to improve the precision of their therapies. Full article

Background: The new frontiers of computer-based surgery, technology, and material advances, have allowed for customized 3D printed manufacturing to become widespread in guided bone regeneration (GBR) in oral implantology. The shape, structural, mechanical, and biological manufacturing characteristics achieved through 3D printing technologies allow for the customization of implant-prosthetic rehabilitations and GBR procedures according to patient-specific needs, reducing complications and surgery time. Therefore, the present narrative review aims to elucidate the 3D-printing digital radiographic process, materials, indications, 3D printed manufacturing-controlled characteristics, histological findings, complications, patient-reported outcomes, and short- and long-term clinical considerations of customized 3D printed mesh, membranes, bone substitutes, and dental implants applied to GBR in oral implantology. Methods: An electronic search was performed through MEDLINE/PubMed, Scopus, BioMed Central, and Web of Science until 30 June 2024. Results: Three-dimensionally printed titanium meshes and bone substitutes registered successful outcomes in vertical/horizontal bone defect regeneration. Three-dimensionally printed polymeric membranes could link the advantages of conventional resorbable and non-resorbable membranes. Few data on customized 3D printed dental implants and abutments are available, but in vitro and animal studies have shown new promising designs that could improve their mechanical properties and tribocorrosion-associated complications. Conclusions: While 3D printing technology has demonstrated potential in GBR, additional human studies are needed to evaluate the short- and long-term follow-up of peri-implant bone levels and volumes following prosthetic functional loading. Full article

Background/Objectives: Lithium taken during pregnancy was linked in the past with increased risk for foetal/newborn malformations, but clinicians believe that it is worse for newborn children not to treat the mothers’ underlying psychiatric illness. We set to review the available evidence of adverse foetal outcomes in women who received lithium treatment for some time during their pregnancy. Methods: We searched four databases and a register to seek papers reporting neonatal outcomes of women who took lithium during their pregnancy by using the appropriate terms. We adopted the PRISMA statement and used Delphi rounds among all the authors to assess eligibility and the Cochrane Risk-of-Bias tool to evaluate the RoB of the included studies. Results: We found 28 eligible studies, 10 of which met the criteria for inclusion in the meta-analysis. The studies regarded 1402 newborn babies and 2595 women exposed to lithium. Overall, the systematic review found slightly increased adverse pregnancy outcomes for women taking lithium for both the first trimester only and any time during pregnancy, while the meta-analysis found increased odds for cardiac or other malformations, preterm birth, and a large size for gestational age with lithium at any time during pregnancy. Conclusions: Women with BD planning a pregnancy should consider discontinuing lithium when euthymic; lithium use during the first trimester and at any time during pregnancy increases the odds for some adverse pregnancy outcomes. Once the pregnancy has started, there is no reason for discontinuing lithium; close foetal monitoring and regular blood lithium levels may obviate some disadvantages of lithium administration during pregnancy. Full article

Aim: This study examines the prevalence and severity of orofacial disorders in patients with fibromyalgia syndrome (FMS). The research assesses the correlation with the Fibromyalgia Assessment Status (FAS) index. The goal is to improve the clinical approaches to these patients. Methods: A cross-sectional study was conducted using a structured questionnaire focused on the correlation between FMS and orofacial problems. The research involved 107 rheumatology patients diagnosed with FMS. Statistical analyses, including Spearman’s correlation, were utilized to investigate the relationships between the FAS index scores and various orofacial symptoms. Results: Of the participants, 11.2% responded that they were aware of the correlation between fibromyalgia and oral health. The statistical analysis showed statistically significant correlations between the FAS index and symptoms such as gum bleeding, teeth grinding during the day, and neck pain (p < 0.05). The correlation between the FAS index and joint noise upon opening the mouth, as well as dissatisfaction with one’s smile, also proved to be highly significant (p < 0.001). Conclusion: The outcomes demonstrate that, as the FAS index increases, the likelihood of developing orofacial disorders also increases among FMS patients. This highlights the importance of a multidisciplinary treatment approach. Full article

Background: The aim of this systematic review was to evaluate the therapeutic potential of probiotics in patients with halitosis and to assess whether probiotics can also be implemented as a preventative tool in oral health. Secondary objectives included the effect of probiotics on oral-health-related quality of life, as well as their safety. Materials and methods: An electronic literature search in Medline (PubMed), Scopus, Web of Science, and the Cochrane library was carried out for the identification and selection of relevant randomized controlled trials. Eligibility was based on inclusion criteria, which included RCTs published after 2013, and the outcome variables were volatile sulfur compound (VSC) levels, organoleptic scores, plaque, or saliva samples to assess cariogenic bacteria counts and/or pH levels. Results: Out of 192 identified records, 16 randomized controlled trials were included. Ten of those studied the effects of probiotics on halitosis and the other six analyzed the effect of probiotics on oral health parameters, such as cariogenic bacteria counts, pH levels, and salivary flow and quality. A total of 921 patients were evaluated. The risk of bias was assessed using the Cochrane risk-of-bias assessment tool version 2. Conclusions: Probiotics exhibit the potential for oral health management by reducing VSC levels, improving saliva quality, and enhancing oral-health-related quality of life. Combining probiotics with tongue scraping may sustain VSC reduction, while symbiotics show potential in reducing tongue coating. However, different bacterial strains have been used in the included studies; hence, the conclusions cannot be generalized, being one of the main limitations of this review. Future research should explore the probiotics’ potential to persist in the oral cavity post-treatment and employ standardized methodologies for conclusive efficacy assessment. Full article

Background: the purpose of this systematic review was to assess the clinical and radiographic effect of subgingival-administered statins as an adjunct periodontal treatment in patients with periodontitis. Methods: Electronic literature searches in Medline/PubMed and the Cochrane Library were conducted to identify all relevant articles. Eligibility was based on inclusion criteria which included Randomized Controlled Trials (RCTs) published after 2010, where the periodontal variables were assessed before and after periodontal treatment in combination with a statin administration. The risk of bias was assessed with the ROBINS-2 tool. The outcome variables were probing depth, clinical attachment level, bleeding on probing, and bone fill in systematically healthy patients, patients with type 2 diabetes, and smokers. Results: Out of 119 potentially eligible articles, 18 randomized controlled trials were included with a total of 1171 participants. The data retrieved from the meta-analysis showed the positive effect that statins have as an adjunctive periodontal disease treatment. When comparing the different types of statins, the PD reduction in the Simvastatin group was significantly higher than the Atorvastatin group at 6 months and at 9 months, while no differences between statins were found for the rest of the outcomes. Over 66% of the articles presented an overall risk of bias with some concerns, making this a limitation of this present RCT. Conclusions: The adjunct administration of statins has proven to have a positive effect on the periodontium by improving both clinical and radiographic parameters by a considerable margin. Full article

Background: All endodontic treatment techniques are associated with the extrusion of debris into periradicular tissues through the apex. The extrusion of apical debris can lead to delayed healing or even therapy failure. It is possible to reduce the extrusion into periapical tissues through various approaches. The objective of this systematic review is to evaluate whether, in cases of non-surgical endodontic retreatment, reciprocating instruments cause greater extrusion of debris compared to instruments with continuous rotation. Methods: A search was conducted on PubMed, Ovid MEDLINE, and the Web of Science. The inclusion criterion was in vitro studies comparing apical extrusion in endodontically treated elements using continuously rotating and reciprocating files. Results: The search on scientific databases yielded 164 results, out of which only 16 were eligible for evaluation after screening. Conclusions: The authors of the research included in this review do not agree on the results obtained. Based on the articles analyzed in this systematic review, it remains unclear whether continuous rotation or reciprocating movement of the endodontic instrument can lead to significant differences in apical debris extrusion; it is not possible to provide a clear clinical recommendation regarding the choice of instrument movement for endodontic procedures. Full article

This paper focuses on autism spectrum disorder (ASD) and food selectivity, both of which are prevalent in the pediatric population. In this context, the authors paid attention to food selectivity and its possible correlation with the atypicality of sensory processes, outlining the useful rehabilitation treatments to draw on. This research included the parents or caregivers of pediatric patients diagnosed with autism spectrum disorder and placed within a therapeutic clinic. The sample is composed of 111 children, males and females, aged between 2 and 10 years, and includes 60 children diagnosed with autism and 51 children with normotypical development, similar in characteristics but without the disorder. The standardized questionnaire, “Brief Autism Mealtime Behavior Inventory”, was developed to examine behavior during meals, especially in children with ASD. The “Brief Sensory Profile”, and the “Child Oral and Motor Proficiency Scale”, were also administered. The results obtained from the analysis lead to evidence of eating and food selectivity difficulty. Additionally, our study demonstrates that food selectivity can be caused by extreme sensory modulation and sensory problems related to the smell, texture, color, and temperature of food. In fact, the results obtained emphasize the correlation between food selectivity and the sensory domains of taste and smell. Furthermore, this research highlights a correlation between motor skills and eating skills, particularly regarding food selectivity, which is closely associated with atypical and disruptive behaviors during meals. Full article

Background: The phenomenon of vapor lock, characterized by the formation of gas bubbles, poses challenges in achieving effective cleaning and debridement during endodontic treatments. This study aimed to evaluate the presence of vapor lock and to quantify its volume in the root canal system. Methods: Ten single-rooted teeth were selected, and their root canals were shaped using the Protaper Next system and irrigated with 5% NaOCl and 17% EDTA. Then, the canals were irrigated with a solution made of contrast medium (8 M cesium chloride solution) mixed in equal proportions with 5% sodium hypochlorite. CBCT scans were performed to analyze the presence and volume of bubbles in different canal thirds. Statistical analysis was conducted to compare the number of bubbles and the percentage of space occupied by them. Results: The results demonstrated the presence of vapor lock in all treated teeth, with a higher concentration of gas bubbles in the apical canal third. The formation of gas bubbles hindered the cleaning and debridement procedures, particularly in the apical region. Conclusions: This study provides evidence of the occurrence of vapor lock and highlights the importance of enhancing the cleaning phase in endodontic treatments to minimize bubble formation or eliminate them once formed. These findings contribute to a better understanding of the challenges posed by vapor lock and suggest avenues for optimizing endodontic procedures. Full article

Despite the high biocompatibility of titanium and its alloys, the need to remove titanium implants is increasingly being debated due to the potential for adverse effects associated with long-term retention. Therefore, new solutions are being sought to enhance the biocompatibility of titanium implants. One of them is to increase the thickness of the passive layer of the implant made of titanium dioxide. We were the first to evaluate the effect of hard-anodized (type II) Ti-6Al-4V alloy discs on the cytotoxicity, mitochondrial function, and redox balance of fibroblasts mitochondria compared to standard-anodized (type III) and non-anodized discs. The study used fibroblasts obtained from human gingival tissue. The test discs were applied to the bottom of 12-well plates. Cells were cultured for 24 h and 7, 14, and 21 days and mitochondria were isolated. We demonstrated the occurrence of oxidative stress in the mitochondria of fibroblasts of all tested groups, regardless of the presence and type of anodization. Type II anodization prevented changes in complex II activity (vs. control). The lowest degree of citrate synthase inhibition occurred in mitochondria exposed to titanium discs with type II anodization. In the last phase of culture, the presence of type II anodization reduced the degree of cytochrome c oxidase inhibition compared to the other tests groups and the control group, and prevented apoptosis. Throughout the experiment, the release of titanium, aluminium, and vanadium ions from titanium discs with a hard-anodized passive layer was higher than from the other titanium discs, but decreased with time. The obtained results proved the existence of dysfunction and redox imbalance in the mitochondria of fibroblasts exposed to hard-anodized titanium discs, suggesting the need to search for new materials perhaps biodegradable in tissues of the human body. Full article

The aim of this study was to evaluate and compare the stress concentration of short dental implants supporting different conical abutments using 3D finite element analysis (3D-FEA). A tridimensional model of single-unit short dental implants (5.2 mm × 5 mm) was designed using the computer-aided design (CAD) software based on the manufacturer’s stereolithography. The short implants were positioned in a bone model to support titanium or ceramic-reinforced PEEK conical abutments considering different bone levels (supra-crestal, crestal or sub-crestal). With the aid of a computer-aided engineering (CAE) software, the finite element model was created and an axial load of 500 N was applied. Observing the mechanical response of the implant, abutment and screw, both evaluated materials resulted in homogeneous stress and could be indicated for implant-supported restorations with short fixtures. However, aiming to decrease the strain in the bone tissue, placing the implant in the sub-crestal position is a preferable option; while the supra-crestal placement decreases the stress at the screw and implant. Full article