Search Results (18)

We investigate steady-state entanglement in a hybrid optomechanical cavity coupled to a Rydberg atomic ensemble confined within a single blockade region. The ensemble behaves as one superatom due to the rigid dipole blockade effect. Through optomechanical coupling, three types of bipartite entanglement emerge among the cavity, the Rydberg superatom, and the movable mirror. As the principal quantum number of the Rydberg atoms increases (leading to reduced atomic decay rates), the direct cavity–mirror coupling entanglement is redistributed into direct cavity–superatom coupling entanglement and indirect superatom–mirror coupling entanglement. Counterintuitively, this redistribution culminates in the complete suppression of two direct coupling entanglements, leaving only the indirect coupling entanglement persistent under resonant Stokes sideband conditions. Systematic parameter tuning reveals entanglement transfer pathways and establishes the preference of the superatom–mirror entanglement for specific principal quantum numbers. Furthermore, we demonstrate the thermal robustness of the surviving entanglement up to experimentally accessible temperatures. These findings advance the understanding of quantum entanglement in hybrid quantum systems and suggest applications in quantum information processing. Full article

The finite-difference time-domain (FDTD) method is a versatile electromagnetic simulation technique, widely used for solving various broadband problems. However, when dealing with complex structures and large dimensions, especially when applying perfectly matched layer (PML) absorbing boundaries, tremendous computational burdens will occur. To reduce the computational time and memory, this paper presents a Message Passing Interface (MPI) parallel scheme based on non-uniform conformal FDTD, which is suitable for convolutional perfectly matched layer (CPML) absorbing boundaries, and adopts a domain decomposition approach, dividing the entire computational domain into several subdomains. More importantly, only one magnetic field exchange is required during the iterations, and the electric field update is divided into internal and external parts, facilitating the synchronous communication of magnetic fields between adjacent subdomains and internal electric field updates. Finally, unmanned helicopters, helical antennas, 100-period folded waveguides, and 16 × 16 phased array antennas are designed to verify the accuracy and efficiency of the algorithm. Moreover, we conducted parallel tests on a supercomputing platform, showing its satisfactory reduction in computational time and excellent parallel efficiency. Full article

This study synthesized a novel oat β-glucan (OBG)-Cr(III) complex (OBG-Cr(III)) and explored its structure, inhibitory effects on α-amylase and α-glucosidase, and hypoglycemic activities and mechanism in vitro using an insulin-resistant HepG2 (IR-HepG2) cell model. The Cr(III) content in the complex was found to be 10.87%. The molecular weight of OBG-Cr(III) was determined to be 7.736 × 10⁴ Da with chromium ions binding to the hydroxyl groups of OBG. This binding resulted in the increased asymmetry and altered spatial conformation of the complex along with significant changes in morphology and crystallinity. Our findings demonstrated that OBG-Cr(III) exhibited inhibitory effects on α-amylase and α-glucosidase. Furthermore, OBG-Cr(III) enhanced the insulin sensitivity of IR-HepG2 cells, promoting glucose uptake and metabolism more efficiently than OBG alone. The underlying mechanism of its hypoglycemic effect involved the modulation of the c-Cbl/PI3K/AKT/GLUT4 signaling pathway, as revealed by Western blot analysis. This research not only broadened the applications of OBG but also positioned OBG-Cr(III) as a promising Cr(III) supplement with enhanced hypoglycemic benefits. Full article

In order to address the issue of hole collapse, which frequently arises when boring piles are being constructed in intricate marine strata, this paper discusses the influence of the slurry ratio on the slurry performance as well as the mechanism of slurry wall protection. It performs this by means of theoretical analysis, laboratory ratio testing, engineering analogies, numerical simulation, and field testing. Our findings demonstrate that adding sodium polyacrylate and sodium carboxymethyl cellulose can enhance mud’s viscosity, contribute to flocculation, and improve the connection between mud and soil layers. Refering similar engineering cases, three optimization schemes are proposed for achieving a mud ratio that offers wall protection in complex marine strata. Furthermore, the particle flow model of slurry viscous fluid is established. The collapse of holes in the sand layer is reflected in the uneven radial displacement of hole walls and the invasion of mud particles. Increasing the viscosity of mud gradually transforms the uneven radial deformation of pore walls in the sand layer into a uniform radial deformation, whereas increasing the proportion of mud significantly decreases the radial displacement of hole walls. Additionally, when the mud pressure in the hole is 300 kPa and 600 kPa, the wall protection effect is better, and there is no particle penetration by substances such as sand. It is found that a high mud pressure can promote the diffusion of mud particles into the sand layer, while low mud pressure cannot balance the pressure on deep soil. The results of the field tests show that the ratio of water–clay–bentonite–CMC-Na–sodium carbonate = 700:110:90:1.5:0.5 used (where the mass percentage of each material is 77.8% water, 12.2% clay, 10% bentonite, 0.16% CMC-Na, and 0.05% sodium carbonate) can effectively prevent hole collapse and reduce the thickness of the sand layer at the bottom of the hole by 50%. Full article

The Clostridium perfringens (C. perfringen) beta2 (CPB2) toxin produced by C. perfringens type C (CpC) can cause necrotizing enteritis in piglets. Immune system activation in response to inflammation and pathogen infection is aided by long non-coding RNAs (lncRNAs). In our previous work, we revealed the differential expression of the novel lncRNA LNC_001186 in CpC-infected ileum versus healthy piglets. This implied that LNC_001186 may be a regulatory factor essential for CpC infection in piglets. Herein, we analyzed the coding ability, chromosomal location and subcellular localization of LNC_001186 and explored its regulatory role in CPB2 toxin-induced apoptosis of porcine small intestinal epithelial (IPEC-J2) cells. RT-qPCR results indicated that LNC_001186 expression was highly enriched in the intestines of healthy piglets and significantly increased in CpC-infected piglets’ ileum tissue and CPB2 toxin-treated IPEC-J2 cells. The total sequence length of LNC_001186 was 1323 bp through RACE assay. CPC and CPAT, two online databases, both confirmed that LNC_001186 had a low coding ability. It was present on pig chromosome 3. Cytoplasmic and nuclear RNA isolation and RNA-FISH assays showed that LNC_001186 was present in the nucleus and cytoplasm of IPEC-J2 cells. Furthermore, six target genes of LNC_001186 were predicted using cis and trans approaches. Meanwhile, we constructed ceRNA regulatory networks with LNC_001186 as the center. Finally, LNC_001186 overexpression inhibited IPEC-J2 cells’ apoptosis caused by CPB2 toxin and promoted cell viability. In summary, we determined the role of LNC_001186 in IPEC-J2 cells’ apoptosis caused by CPB2 toxin, which assisted us in exploring the molecular mechanism of LNC_001186 in CpC-induced diarrhea in piglets. Full article

Piglet diarrhea caused by Clostridium perfringens (C. perfringens) type C (CpC) seriously endangers the development of the pig production industry. C. perfringens beta2 (CPB2) toxin is a virulent toxin produced by CpC. Long non-coding RNAs (lncRNAs) are key regulators in the immune inflammatory response to bacterial infection. Nevertheless, the functional mechanism of lncRNAs in bacterial piglet diarrhea is unclear. Herein, a novel lncRNA lnc001776 expression was confirmed to be substantially elevated in the ileum tissue of CpC-infected diarrhea piglets and in CPB2 toxin-treated porcine small intestinal epithelial cells (IPEC-J2). lnc001776 knockdown restrained CPB2 toxin-induced apoptosis, inflammatory injury, barrier dysfunction and activation of JNK/NF-kB pathway in IPEC-J2 cells. Additionally, ssc-let-7i-5p was identified as sponge for lnc001776. Overexpression of ssc-let-7i-5p repressed CPB2-induced injury in IPEC-J2 cells. Interleukin 6 (IL-6), a target gene of ssc-let-7i-5p, was enhanced in CPB2 toxin-treated IPEC-J2 cells. Rescue experiments demonstrated that a ssc-let-7i-5p mimic reversed the effect of lnc001776 overexpression on CPB2 toxin-induced IPEC-J2 cell injury and JNK/NF-kB pathway, whereas IL-6 overexpression partially restored the impact of lnc001776. Overall, lnc001776 overexpression exacerbated CPB2 toxin-induced IPEC-J2 cell damage by sponging ssc-let-7i-5p to regulate IL-6 to activate JNK/NF-kB pathway, indicating that lnc001776 could be a key target for piglet resistance to CpC-induced diarrhea. Full article

Oxidative stress is considered as a major factor causing retinal pigment epithelium (RPE) dysfunction and finally leading to retinal diseases such as age-related macular degeneration (AMD). Developing hydrogels for RPE cell delivery, especially those with antioxidant feature, is emerging as a promising approach for AMD treatment. Herein, a readily prepared antioxidant alginate-based hydrogel was developed to serve as a cytoprotective agent for RPE cells against oxidative damage. Alg-BOB was synthesized via conjugation of benzoxaborole (BOB) to the polysaccharide backbone. Hydrogels were formed through self-crosslinking of Alg-BOB based on benzoxaborole-diol complexation. The resulting hydrogel showed porous micro-structure, pH dependent mechanical strength and excellent self-healing, remolding, and injectable properties. Moreover, the hydrogel exhibited excellent cytocompatibility and could efficiently scavenge reactive oxygen species (ROS) to achieve an enhanced viability of ARPE-19 cells under oxidative condition. Altogether, our study reveals that the antioxidant Alg-BOB hydrogel represents an eligible candidate for RPE delivery and AMD treatment. Full article

Clostridium perfringens beta2 (CPB2) toxin is one of the main pathogenic toxins produced by Clostridium perfringens, which causes intestinal diseases in animals and humans. The N6-methyladenosine (m6A) modification is the most common reversible modification in eukaryotic disease processes. Methyltransferase-like 3 (METTL3) regulates immunity and inflammatory responses induced by the bacterial infections in animals. However, METTL3′s involvement in CPB2-treated intestinal porcine epithelial cell line-J2 (IPEC-J2) remains unclear. In the current study, we used methylated RNA immunoprecipitation-quantitative polymerase chain reaction, Western blotting and immunofluorescence assay to determine the role of METTL3 in CPB2-exposed IPEC-J2 cells. The findings revealed that m6A and METTL3 levels were increased in CPB2 treated IPEC-J2 cells. Functionally, METTL3 overexpression promoted the release of inflammatory factors, increased cytotoxicity, decreased cell viability and disrupted tight junctions between cells, while the knockdown of METTL3 reversed these results. Furthermore, METTL3 was involved in the inflammatory response of IPEC-J2 cells by activating the TLR2/NF-κB signaling pathway through regulating TLR2 m6A levels. In conclusion, METTL3 overexpression triggered the TLR2/NF-κB signaling pathway and promoted CPB2-induced inflammatory responses in IPEC-J2 cells. These findings may provide a new strategy for the prevention and treatment of diarrhea caused by Clostridium perfringens. Full article

In this study, fresh Lyophyllum decastes was dried using hot air drying (HAD), hot air combined with vacuum drying (HAVD), and vacuum freeze drying (VFD). Additionally, the quality and volatile compounds were analyzed. VFD achieved the best color retention, the highest rehydration capacity, and the slightest damaged tissue structure; however, it recorded the longest drying time and the highest energy consumption. HAD was the most energy-efficient of the three methods. Furthermore, the products with more hardness and elasticity were obtained by HAD and HAVD—this finding was convenient for transportation. In addition, GC-IMS demonstrated that the flavor components had significantly changed after drying. A total of 57 volatile flavor compounds was identified, and the aldehyde, alcohol, and ketone compounds were the primary ingredient of the L. decastes flavor component, whereby the relative content of the HAD sample was apparently higher than HAVD and VFD. Taken together, VFD was better at preserving the color and shape of fresh L. decastes, but HAD was more appropriate for drying L. decastes because of the lower energy consumption, and was more economical. Meanwhile, HAD could be used to produce a more intense aroma. Full article

N6-methyladenosine (m6A) modification can accommodate mRNA processing, stability, and translation in mammals, and fat mass and obesity associated protein (FTO) is a vital demethylase in the m6A modification pathway. Clostridium perfringens type C (C. perfringens type C) causes diarrhea in piglets and has a serious impact on the pig industry. However, our understanding of the effect of m6A in the process of C. perfringens type C infectious piglet diarrhea (CPTCIPD) is limited. Here, an in vitro model of CPTCIPD was constructed by treating the intestinal porcine epithelial cell line-J2 (IPEC-J2) with Clostridium perfringens beta2 (CPB2) toxin, and the role of FTO was analyzed using quantitative real-time polymerase chain reaction, Western blotting, and flow cytometry. The results revealed that the overall RNA m6A contents at the tissue and cell levels were significantly up-regulated after C. perfringens infection (p < 0.05). FTO expression was significantly reduced in CPB2-treated IPEC-J2 cells. Functionally, FTO knockdown in the treated cells inhibited their proliferation and promoted apoptosis and the inflammation phenotype, whereas FTO overexpression had the opposite effects. Inhibiting FTO prolonged the half-life and up-regulated the expression of Caspase 3, leading to apoptosis. Therefore, this work explored the regulation of FTO in IPEC-J2 cells after CPB2 treatment and enhanced our understanding of the effect of the m6A modification in CPTCIPD. Full article

Coarse aggregate is the main component of asphalt mixtures, and differences in its morphology directly impact road performance. The utilization of standard aggregates can benefit the standard design and performance improvement. In this study, 3D printing technology was adopted to prepare artificial aggregates with specific shapes for the purpose of making the properties of artificial aggregates to be similar to the properties of natural aggregates. Through a series of material experiments, the optimal cement-based material ratio for the preparation of high-strength artificial aggregates and corresponding manufacturing procedures have been determined. The performance of the artificial aggregates has been verified by comparing the physical and mechanical properties with those of natural aggregates. Results indicate that using 3D printing technology to generate the standard coarse aggregate is feasible, but its high cost in implementation cannot be ignored. The 3D shape of the artificial aggregate prepared by the grouting molding process has a good consistency with the natural aggregate, and the relative deviation of the overall macro-scale volume index of the artificial aggregate is within 4%. The average Los Angeles abrasion loss of artificial cement-based aggregate is 15.2%, which is higher than that of diabase aggregate, but significantly lower than that of granite aggregate and limestone aggregate. In a nutshell, 3D printed aggregates prepared using the optimized cement-based material ratio and corresponding manufacturing procedures have superior physical and mechanical performance, which provides technical support for the test standardization and engineering application of asphalt pavements. Full article

The rapid expansion of urbanization both in scale and population leads to a series of serious urban diseases, which become a huge obstacle to the healthy and sustainable development of cities. To alleviate these problems and challenges, China launched a smart city construction program in the past decade and has taken the lead in smart city construction in the world. However, there is still a lack of reflection and summary on the practice of smart cities in China. Based on the definition and concept of smart city, this paper points out the internal and external driving factors of China’s smart city development, then summarizes the four major characteristics of China’s smart city construction practice, and explores the main problems existing in the process of China’s smart city construction. Through the reflection and summary, we can facilitate development of smart cities in China, provide useful reference to urban planners and smart city practitioners in other countries and regions, and promote the healthy and sustainable development of cities. Full article

1-Hydroxy-2-butanone (HB) is a key intermediate for anti-tuberculosis pharmaceutical ethambutol. Commercially available HB is primarily obtained by the oxidation of 1,2-butanediol (1,2-BD) using chemical catalysts. In present study, seven enzymes including diol dehydrogenases, secondary alcohol dehydrogenases and glycerol dehydrogenase were chosen to evaluate their abilities in the conversion of 1,2-BD to HB. The results showed that (2R, 3R)- and (2S, 3S)-butanediol dehydrogenase (BDH) from Serratia sp. T241 could efficiently transform (R)- and (S)-1,2-BD into HB respectively. Furthermore, two biocatalysts co-expressing (2R, 3R)-/(2S, 3S)-BDH, NADH oxidase and hemoglobin protein in Escherichia coli were developed to convert 1,2-BD mixture into HB, and the transformation conditions were optimized. Maximum HB yield of 341.35 and 188.80 mM could be achieved from 440 mM (R)-1,2-BD and 360 mM (S)-1,2-BD by E. coli (pET-rrbdh-nox-vgb) and E. coli (pET-ssbdh-nox-vgb) under the optimized conditions. In addition, two biocatalysts showed the ability in chiral resolution of 1,2-BD isomers, and 135.68 mM (S)-1,2-BD and 112.43 mM (R)-1,2-BD with the purity of 100% could be obtained from 300 and 200 mM 1,2-BD mixture by E. coli (pET-rrbdh-nox-vgb) and E. coli (pET-ssbdh-nox-vgb), respectively. These results provided potential application for HB production from 1,2-BD mixture and chiral resolution of (R)-1,2-BD and (S)-1,2-BD. Full article

Electrolytes are involved in the thermal runaway (TR) process of cells, which is a potential hazard in lithium-ion batteries (LIBs). Therefore, the effects of different mass ratio of carbonate solvents (ethylene carbonate (EC)/propylene carbonate (PC)/ethyl methyl carbonate (EMC)) with LiBF₄ and different environmental pressure on the combustion characteristics of electrolyte such as flame centerline temperature, mass loss rate (MLR) and heat release rate (HRR) were analyzed. The combustion process could be divided into four stages: ignition, stable combustion stage, stable combustion with flame color change stage and extinguishing; with the decrease of pressure, the MLR of electrolyte declined and the combustion time prolonged, while the temperature of flame centerline increased. Full article

The electrolyte is one of the components that releases the most heat during the thermal runaway (TR) and combustion process of lithium-ion batteries (LIBs). Therefore, the thermal hazard of the electrolyte has a significant impact on the safety of LIBs. In this paper, the combustion characteristics of the electrolyte such as parameters of heat release rate (HRR), mass loss rate (MLR) and total heat release (THR) have been investigated and analyzed. In order to meet the current demand of plateau sections with low-pressure and low-oxygen areas on LIBs, an electrolyte with the most commonly used lithium salts, LiPF₆, was chosen as the experimental sample. Due to the superior low-temperature performance, an electrolyte containing LiBF4 was also selected to be compared with the LiPF₆ sample. Combustion experiments were conducted for electrolyte pool fire under various altitudes. According to the experimental results, both the average and peak values of MLR in the stable combustion stage of the electrolyte pool fire had positive exponential relations with the atmospheric pressure. At the relatively higher altitude, there was less THR, and the average and peak values of HRR decreased significantly, while the combustion duration increased remarkably when compared with that at the lower altitude. The average HRR of the electrolyte with LiBF₄ was obviously lower than that of solution containing LiPF₆ under low atmospheric pressure, which was slightly higher for LiBF₄ electrolyte at standard atmospheric pressure. Because of the low molecular weight (MW) of LiBF₄, the THR of the corresponding electrolyte was larger, so the addition of LiBF₄ could not effectively improve the safety of the electrolyte. Moreover, the decrease of pressure tended to increase the production of harmful hydrogen fluoride (HF) gas. Full article