Designs | Notable Papers in Section “Smart Manufacturing System Design”

1. “Exploring an AM-Enabled Combination-of-Functions Approach for Modular Product Design”
by Charul Chadha, Kathryn A. Crowe, Christina L. Carmen and Albert E. Patterson
Designs 2018, 2(4), 37; https://doi.org/10.3390/designs2040037
Available online: https://www.mdpi.com/2411-9660/2/4/37

2. “3D Printed Radar Lenses with Anti-Reflective Structures”
by Ross J. Friel, Maria Gerling-Gerdin, Emil Nilsson and Björn P. Andreasson
Designs 2019, 3(2), 28; https://doi.org/10.3390/designs3020028
Available online: https://www.mdpi.com/2411-9660/3/2/28

3. “A Multi-Part Production Planning Framework for Additive Manufacturing of Unrelated Parallel Fused Filament Fabrication 3D Printers”
by Thibaut Cadiou, Frédéric Demoly and Samuel Gomes
Designs 2022, 6(1), 11; https://doi.org/10.3390/designs6010011
Available online: https://www.mdpi.com/2411-9660/6/1/11

4. “Smart Blade Flutter Alleviation with Rotational Effect”
by Reza Moosavi
Designs 2022, 6(5), 98; https://doi.org/10.3390/designs6050098
Available online: https://www.mdpi.com/2411-9660/6/5/98

5. “Robot Coordination: Aeronautic Use Cases Handling Large Parts”
by Itzel De Jesús González Ojeda, Pablo Bengoa, Aitor Ibarguren, Juan Carlos Antolín-Urbaneja, Panagiotis Angelakis, Christos Gkournelos, Konstantinos Lotsaris, Sotiris Makris and Sandra Martínez De Lahidalga
Designs 2022, 6(6), 116; https://doi.org/10.3390/designs6060116
Available online: https://www.mdpi.com/2411-9660/6/6/116

6. “Open-Source Vertical Swinging Wood-Based Solar Photovoltaic Racking Systems”
by Nicholas Vandewetering, Koami Soulemane Hayibo and Joshua M. Pearce
Designs 2023, 7(2), 34; https://doi.org/10.3390/designs7020034
Available online: https://www.mdpi.com/2411-9660/7/2/34

7. “Manufacturing and Assembly for the Ease of Product Recycling: A Review”
by Ahad Shahhoseini, Sara Heydari and Siamak Pedrammehr
Designs 2023, 7(2), 42; https://doi.org/10.3390/designs7020042
Available online: https://www.mdpi.com/2411-9660/7/2/42

8. “By Visualizing the Deformation with Mechanoluminescent Particles, Additive Manufacturing Offers a Practical Alternative to Stress and Strain Simulation”
by Ernests Einbergs, Agnese Spustaka, Virginija Vitola and Aleksejs Zolotarjovs
Designs 2023, 7(2), 54; https://doi.org/10.3390/designs7020054
Available online: https://www.mdpi.com/2411-9660/7/2/54

9. “A Structural and Thermal Comparative Review of 3D-Printed Wall Shapes”
by Nicholas D. Bello and Ali M. Memari
Designs 2023, 7(3), 80; https://doi.org/10.3390/designs7030080
Available online: https://www.mdpi.com/2411-9660/7/3/80

10. “Design for Additive Manufacturing: Recent Innovations and Future Directions”
by Paul F. Egan
Designs 2023, 7(4), 83; https://doi.org/10.3390/designs7040083
Available online: https://www.mdpi.com/2411-9660/7/4/83