Next Article in Journal / Special Issue
Strategies to Hierarchical Porosity in Carbon Nanofiber Webs for Electrochemical Applications
Previous Article in Journal
Fe2O3 Blocking Layer Produced by Cyclic Voltammetry Leads to Improved Photoelectrochemical Performance of Hematite Nanorods
Previous Article in Special Issue
Interface Science Using Ambient Pressure Hard X-ray Photoelectron Spectroscopy
Article Menu
Issue 1 (March) cover image

Export Article

Open AccessArticle

Potential Dependent Structure and Stability of Cu(111) in Neutral Phosphate Electrolyte

1
Department of Physics, University of Liverpool, Liverpool L69 7ZE, UK
2
School of Chemistry, University of Birmingham. Birmingham B15 2TT, UK
*
Author to whom correspondence should be addressed.
Surfaces 2019, 2(1), 145-158; https://doi.org/10.3390/surfaces2010012
Received: 30 January 2019 / Revised: 19 February 2019 / Accepted: 20 February 2019 / Published: 24 February 2019
(This article belongs to the Special Issue Electrochemical Surface Science: Basics and Applications)
  |  
PDF [2009 KB, uploaded 24 February 2019]
  |  

Abstract

Copper and copper oxide electrode surfaces are suitable for the electrochemical reduction of CO2 and produce a range of products, with the product selectivity being strongly influenced by the surface structure of the copper electrode. In this paper, we present in-situ surface X-ray diffraction studies on Cu(111) electrodes in neutral phosphate buffered electrolyte solution. The underlying mechanism of the phosphate adsorption and deprotonation of the (di)-hydrogen phosphate is accompanied by a roughening of the copper surface. A change in morphology of the copper surface induced by a roughening process caused by the formation of a mixed copper–oxygen layer could also be observed. The stability of the Cu(111) surface and the change of morphology upon potential cycling strongly depends on the preparation method and history of the electrode. The presence of copper islands on the surface of the Cu(111) electrode leads to irreversible changes in surface morphology via a 3D Cu growth mechanism. View Full-Text
Keywords: Cu(111); electrochemical interface; in-situ X-ray diffraction Cu(111); electrochemical interface; in-situ X-ray diffraction
Figures

Figure 1

This is an open access article distributed under the Creative Commons Attribution License which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited (CC BY 4.0).
SciFeed

Share & Cite This Article

MDPI and ACS Style

Grunder, Y.; Beane, J.; Kolodziej, A.; Lucas, C.A.; Rodriguez, P. Potential Dependent Structure and Stability of Cu(111) in Neutral Phosphate Electrolyte. Surfaces 2019, 2, 145-158.

Show more citation formats Show less citations formats

Article Metrics

Article Access Statistics

1

Comments

[Return to top]
Surfaces EISSN 2571-9637 Published by MDPI AG, Basel, Switzerland RSS E-Mail Table of Contents Alert
Back to Top