Next Article in Journal
Analysis of Porosity in Aluminum Alloy (AlSi10Mg) Using Tomographic Image Processing
Next Article in Special Issue
Design and Material Characterisation of Additively Manufactured Polymer Scaffolds for Medical Devices
Previous Article in Journal
Three-Dimensionally Printed Catalytic Structures
Previous Article in Special Issue
Additively Produced Ti-6Al-4V Osteosynthesis Devices Meet the Requirements for Tensile Strength and Fatigue
 
 
Article

Article Versions Notes

J. Manuf. Mater. Process. 2025, 9(11), 373; https://doi.org/10.3390/jmmp9110373
Action Date Notes Link
article html file updated 17 November 2025 04:18 CET Original file https://www.mdpi.com/2504-4494/9/11/373/html
article pdf uploaded. 17 November 2025 04:17 CET Updated version of record https://www.mdpi.com/2504-4494/9/11/373/pdf
article xml uploaded. 17 November 2025 04:17 CET Update https://www.mdpi.com/2504-4494/9/11/373/xml
article xml file uploaded 17 November 2025 04:17 CET Original file -
article pdf uploaded. 13 November 2025 16:36 CET Version of Record https://www.mdpi.com/2504-4494/9/11/373/pdf-vor
Back to TopTop