Next Article in Journal
Wafer Eccentricity Deviation Measurement Method Based on Line-Scanning Chromatic Confocal 3D Profiler
Next Article in Special Issue
Guided-Wave Properties of Slow-Wave Substrate-Integrated Waveguide Patterned with Non-Uniform Metasurface Unit Cells with Various Degrees of Rotation
Previous Article in Journal
Improved Classification of Blurred Images with Deep-Learning Networks Using Lucy-Richardson-Rosen Algorithm
Previous Article in Special Issue
Lithography Alignment Techniques Based on Moiré Fringe
 
 
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Communication

Investigation into Electromagnetic Compatibility Conducted Susceptibility of a Laser Ranging System

1
Research Institute for Frontier Science, School of Electronic and Information Engineering, Beihang University, Beijing 100191, China
2
China Academy of Launch Vehicle Technology, Beijing 100191, China
3
Shanghai Radio Equipment Research Institute, Shanghai 201109, China
*
Authors to whom correspondence should be addressed.
Photonics 2023, 10(4), 397; https://doi.org/10.3390/photonics10040397
Submission received: 18 February 2023 / Revised: 23 March 2023 / Accepted: 27 March 2023 / Published: 3 April 2023

Abstract

Laser ranging systems are a widely used form of electronic system and are generally influenced by complex electromagnetic environments. We used a laser ranging system comprising the VL53L0X laser ranging sensor module as the research object and designed a sensitive experimental platform based on the laser ranging system. In this work, we have shown that electromagnetic interference signals can affect the performance of laser ranging systems. The electromagnetic interference signal was found to enter through the chip selection port of the laser sensor chip to affect the work of the laser sensor chip. Finally, we obtained the susceptibility threshold characteristics of the laser ranging system under the influence of different types of interference signal. This study deepens the understanding of the electromagnetic susceptibility mechanism of laser ranging systems and helps in the design of their electromagnetic compatibility.
Keywords: bulk current injection (BCI); electromagnetic environmental effect; electromagnetic interference; susceptibility threshold; laser ranging; laser sensor bulk current injection (BCI); electromagnetic environmental effect; electromagnetic interference; susceptibility threshold; laser ranging; laser sensor

Share and Cite

MDPI and ACS Style

Huang, P.; Li, B.; Li, W.; Liao, Y.; Su, D. Investigation into Electromagnetic Compatibility Conducted Susceptibility of a Laser Ranging System. Photonics 2023, 10, 397. https://doi.org/10.3390/photonics10040397

AMA Style

Huang P, Li B, Li W, Liao Y, Su D. Investigation into Electromagnetic Compatibility Conducted Susceptibility of a Laser Ranging System. Photonics. 2023; 10(4):397. https://doi.org/10.3390/photonics10040397

Chicago/Turabian Style

Huang, Peng, Bing Li, Weimin Li, Yi Liao, and Donglin Su. 2023. "Investigation into Electromagnetic Compatibility Conducted Susceptibility of a Laser Ranging System" Photonics 10, no. 4: 397. https://doi.org/10.3390/photonics10040397

APA Style

Huang, P., Li, B., Li, W., Liao, Y., & Su, D. (2023). Investigation into Electromagnetic Compatibility Conducted Susceptibility of a Laser Ranging System. Photonics, 10(4), 397. https://doi.org/10.3390/photonics10040397

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Metrics

Back to TopTop