Next Article in Journal
A Study on the Effect of Ambient Air Plasma Treatment on the Properties of Methylammonium Lead Halide Perovskite Films
Next Article in Special Issue
Mechanical Properties of CoCr Dental-Prosthesis Restorations Made by Three Manufacturing Processes. Influence of the Microstructure and Topography
Previous Article in Journal
Sustainable High-Speed Finishing Turning of Haynes 282 Using Carbide Tools in Dry Conditions
Previous Article in Special Issue
The Influence of Carbon Coatings on the Functional Properties of X39Cr13 and 316LVM Steels Intended for Biomedical Applications
 
 
Article
Peer-Review Record

Effect of Gallium Content and Heat Treatment on the Microstructure and Corrosion Rate of Magnesium Binary Alloys

Metals 2019, 9(9), 990; https://doi.org/10.3390/met9090990
by Anabel A. Hernández-Cortés *, José C. Escobedo-Bocardo, Dora A. Cortés-Hernández and José M. Almanza-Robles
Reviewer 1: Anonymous
Reviewer 2: Anonymous
Metals 2019, 9(9), 990; https://doi.org/10.3390/met9090990
Submission received: 16 May 2019 / Revised: 14 June 2019 / Accepted: 16 June 2019 / Published: 7 September 2019

Round  1

Reviewer 1 Report

The manuscript is well constructed and, although the methodology is quite simple, the results are well presented and the discussion is scientifically sound. The manuscript allows for a quick reading and easy comprehension of the subject. Even though the subject researched is not particulalry new there are still some interesting points. I would only recomend that the authors correct the formatting of their images, since in many occasions the numering (a), (b), etc is not properly positioned. 

Author Response

Point 1: I would only recommend that the authors correct the formatting of their images, since in many occasions the numbering (a), (b), etc is not properly positioned

Comment: Agreed. The images format has been corrected in the revised version as suggested.

Reviewer 2 Report

Article is very interesting and written very well. The methodology and results was very well presented.
Comments and Suggestions for Authors - the proposed amendments:

The size and contrast of some photos could be improved.
A slight correction of the title of the article is suggested. The authors should use the wording "corrosion rate".
Designations of drawings (a, b, c, d) - illegible, use drawings in tables.
Fig. 2. - black font in the pictures - illegible.
Fig. 4. - lack of standard deviation.
Fig. 5. - incorrect marking of drawings "a" and "b" (similarly as before).

Fig. 6. - incorrect marking of drawings "c" and "d".
Fig. 10. - designations of drawings (a, b, c) - illegible, use drawings in tables.
Fig. 11., Fig. 12. - designations of drawings (a, b, c, d) - illegible, use drawings in tables.
Fig. 14. - the lack of signs/marks "a" and "b".

Author Response

Point 1: The size and contrast of some photos could be improved.


Comment 1: Agreed and done. The resolution of all the images was modified; the size of images 1-3 and 14 was also modified.

Point 2: A slight correction of the title of the article is suggested. The authors should use the wording "corrosion rate".

Comment 2: Agreed and done. The title was changed to: Effect of gallium content and heat treatment on the microstructure and corrosion rate of magnesium binary alloys

Point 3: Designations of drawings (a, b, c, d) - illegible, use drawings in table

Comment 3: Agreed and done

Back to TopTop