Department of Materials Science and Engineering, The Royal Institute of Technology (KTH), Brinellvägen 23, 100 44 Stockholm, Sweden
Department of Mathematics and Statistics, University of Limerick, Limerick V94 T9PX, Ireland
Received: 29 May 2019 / Accepted: 31 May 2019 / Published: 3 June 2019
PDF [726 KB, uploaded 3 June 2019]
Note: In lieu of an abstract, this is an excerpt from the first page.
Continuous casting is a process whereby molten metal is solidified into a semi-finished billet, bloom, or slab for subsequent rolling in finishing mills; it is the most frequently used process to cast not only steel, but also aluminum and copper alloys [...]
This is an open access article distributed under the Creative Commons Attribution License
which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited (CC BY 4.0).
Share & Cite This Article
MDPI and ACS Style
Vynnycky, M. Continuous Casting. Metals 2019, 9, 643.
Vynnycky M. Continuous Casting. Metals. 2019; 9(6):643.
Vynnycky, Michael. 2019. "Continuous Casting." Metals 9, no. 6: 643.
Show more citation formats
Show less citations formats
Note that from the first issue of 2016, MDPI journals use article numbers instead of page numbers. See further details here.
[Return to top]
For more information on the journal statistics, click here
Multiple requests from the same IP address are counted as one view.