Next Article in Journal
Dislocation Mechanics Pile-Up and Thermal Activation Roles in Metal Plasticity and Fracturing
Next Article in Special Issue
Automated Continuous Production Line of Parts Made of Metallic Foams
Previous Article in Journal
Effect of SiO2 on the Mechanical Property and Reduction of Calcium Ferrite
Previous Article in Special Issue
Aluminum Foam-Filled Steel Tube Fabricated from Aluminum Burrs of Die-Castings by Friction Stir Back Extrusion
 
 
Article
Peer-Review Record

Compressive Properties of A2024 Alloy Foam Fabricated through a Melt Route and a Semi-Solid Route

Metals 2019, 9(2), 153; https://doi.org/10.3390/met9020153
by Takashi Kuwahara 1,*, Taro Osaka 1, Mizuki Saito 1 and Shinsuke Suzuki 1,2
Reviewer 1: Anonymous
Reviewer 2: Anonymous
Metals 2019, 9(2), 153; https://doi.org/10.3390/met9020153
Submission received: 14 December 2018 / Revised: 22 January 2019 / Accepted: 22 January 2019 / Published: 29 January 2019
(This article belongs to the Special Issue Cellular Metals: Fabrication, Properties and Applications)

Round 1

Reviewer 1 Report

In my opinion the topic is of interest to the readers of Metals, the methods and the results are clearly reported however the manuscript draft needs to be improved for what concern the punctuation and the English, moreover the bibliographic references are absolutely not sufficient. The authors should broaden the survey on literature by adding additional bibliographic references to fill the gap, paying particular attention to articles previously published on the Mdpi collection.


Author Response

Dear Reviewer

Thank you very much for your very careful reviews. We reply to the suggestions. Please see the attachment.


Author Response File: Author Response.docx

Reviewer 2 Report

manuscript need certain improvement in discussion

see attached pdf

Comments for author File: Comments.pdf

Author Response

Dear Reviewer

 

Thank you very much for your very careful reviews. We reply to the suggestions. Please see the attachment.

Author Response File: Author Response.docx

Back to TopTop