Next Article in Journal
Biomechanical Loading Comparison between Titanium and Unsintered Hydroxyapatite/Poly-L-Lactide Plate System for Fixation of Mandibular Subcondylar Fractures
Next Article in Special Issue
Efficient 1 µm Laser Emission of Czochralski-Grown Nd:LGSB Single Crystal
Previous Article in Journal
Effect of Heat Treatment on Microstructure and Properties of Clad Plates 316L/Q370qE
Previous Article in Special Issue
Applications of Copolymers Consisting of 2,6-di(9H-carbazol-9-yl)pyridine and 3,6-di(2-thienyl)carbazole Units as Electrodes in Electrochromic Devices
Article Menu
Issue 9 (May-1) cover image

Export Article

Open AccessArticle

Design of a 2 × 4 Hybrid MMI-MZI Configuration with MMI Phase-Shifters

1,*,‡ and 2,†,‡
1
SeedNanoTech and Consulting, Brampton, ON L6Y 3J6, Canada
2
Department of Electrical & Computer Engineering, The University of British Columbia, Vancouver, BC V6T 1Z4, Canada
*
Author to whom correspondence should be addressed.
Current address: Nanophotonics Laboratory, GEM Systems Inc., Markham, ON, Canada.
These authors contributed equally to this work.
Materials 2019, 12(9), 1555; https://doi.org/10.3390/ma12091555
Received: 20 March 2019 / Revised: 20 April 2019 / Accepted: 29 April 2019 / Published: 12 May 2019
(This article belongs to the Special Issue Photonic Materials and Devices)
  |  
PDF [25446 KB, uploaded 14 May 2019]
  |     |  

Abstract

This paper reports design of a 2 × 4 hybrid multimode interferometer-Mach-zehnder interferometer (MMI-MZI) configuration consiting of compact thermo-optical switches on the silicon-on-insulator (SOI) platform. The device consists of two identical MMI slab waveguides as power splitters and couplers that are connected with two identical MMI-based phase shifters, and linear tapers at both ends of the MMIs to minimize the power coupling loss. A thin Al pad is used as a heating element and a trench is created around this pad to prevent heat from spreading, and to minimize loss. The calculated average thermo-optical switching power consumption, excess loss, and power imbalance are 1.4 mW, 0.9 dB, and 0.1 dB, respectively. The overall footprint of the device is 6 × 304 μ m 2 . The new heating method has advantages of compact size, ease of fabrication on SOI platform with the current CMOS technology, and offers low excess loss and power consumption as demanded by devices based on SOI technology. The device can act as two independent optical switches in one device. View Full-Text
Keywords: multimode interferometer; MMI; MZI; thermo-optical switch; SOI technology multimode interferometer; MMI; MZI; thermo-optical switch; SOI technology
Figures

Figure 1

This is an open access article distributed under the Creative Commons Attribution License which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited (CC BY 4.0).

Supplementary material

SciFeed

Share & Cite This Article

MDPI and ACS Style

Niraula, B.B.; Rizal, C. Design of a 2 × 4 Hybrid MMI-MZI Configuration with MMI Phase-Shifters. Materials 2019, 12, 1555.

Show more citation formats Show less citations formats

Note that from the first issue of 2016, MDPI journals use article numbers instead of page numbers. See further details here.

Related Articles

Article Metrics

Article Access Statistics

1

Comments

[Return to top]
Materials EISSN 1996-1944 Published by MDPI AG, Basel, Switzerland RSS E-Mail Table of Contents Alert
Back to Top