Next Article in Journal
Activity Recognition Invariant to Wearable Sensor Unit Orientation Using Differential Rotational Transformations Represented by Quaternions
Next Article in Special Issue
AOA-Based Three-Dimensional Multi-Target Localization in Industrial WSNs for LOS Conditions
Previous Article in Journal
Point Pair Feature-Based Pose Estimation with Multiple Edge Appearance Models (PPF-MEAM) for Robotic Bin Picking
Previous Article in Special Issue
Opportunistic and Location-Based Collaboration Architecture among Mobile Assets and Fixed Manufacturing Processes
Article Menu
Issue 8 (August) cover image

Export Article

Open AccessArticle
Sensors 2018, 18(8), 2724; https://doi.org/10.3390/s18082724

Optimal Deployment of FiWi Networks Using Heuristic Method for Integration Microgrids with Smart Metering

1
Electrical Engineering, Universidad Politécnica Salesiana, Quito EC170146, Ecuador
2
Department of Telecommunications, Universidad Pontificia Bolivariana, Medellín 050031, Colombia
3
Faculty of Engineering, Universidad Tecnológica Equinoccial, Quito EC170147, Ecuador
*
Author to whom correspondence should be addressed.
Received: 2 July 2018 / Revised: 12 August 2018 / Accepted: 15 August 2018 / Published: 19 August 2018
(This article belongs to the Special Issue Smart Industrial Wireless Sensor Networks)
Full-Text   |   PDF [6046 KB, uploaded 20 August 2018]   |  

Abstract

The unpredictable increase in electrical demand affects the quality of the energy throughout the network. A solution to the problem is the increase of distributed generation units, which burn fossil fuels. While this is an immediate solution to the problem, the ecosystem is affected by the emission of CO2. A promising solution is the integration of Distributed Renewable Energy Sources (DRES) with the conventional electrical system, thus introducing the concept of Smart Microgrids (SMG). These SMGs require a safe, reliable and technically planned two-way communication system. This paper presents a heuristic based on planning capable of providing a bidirectional communication that is near optimal. The model follows the structure of a hybrid Fiber-Wireless (FiWi) network with the purpose of obtaining information of electrical parameters that help us to manage the use of energy by integrating conventional electrical system with SMG. The optimization model is based on clustering techniques, through the construction of balanced conglomerates. The method is used for the development of the clusters along with the Nearest-Neighbor Spanning Tree algorithm (N-NST). Additionally, the Optimal Delay Balancing (ODB) model will be used to minimize the end to end delay of each grouping. In addition, the heuristic observes real design parameters such as: capacity and coverage. Using the Dijkstra algorithm, the routes are built following the shortest path. Therefore, this paper presents a heuristic able to plan the deployment of Smart Meters (SMs) through a tree-like hierarchical topology for the integration of SMG at the lowest cost. View Full-Text
Keywords: optimization; smart metering; IoT; microgrid; heuristic; sensor networks optimization; smart metering; IoT; microgrid; heuristic; sensor networks
Figures

Figure 1

This is an open access article distributed under the Creative Commons Attribution License which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited (CC BY 4.0).
SciFeed

Share & Cite This Article

MDPI and ACS Style

Inga, E.; Campaña, M.; Hincapié, R.; Moscoso-Zea, O. Optimal Deployment of FiWi Networks Using Heuristic Method for Integration Microgrids with Smart Metering. Sensors 2018, 18, 2724.

Show more citation formats Show less citations formats

Note that from the first issue of 2016, MDPI journals use article numbers instead of page numbers. See further details here.

Related Articles

Article Metrics

Article Access Statistics

1

Comments

[Return to top]
Sensors EISSN 1424-8220 Published by MDPI AG, Basel, Switzerland RSS E-Mail Table of Contents Alert
Back to Top