Search Results (48)

Clostridium perfringens is a major cause of necrotizing enteritis in chickens. This study aimed to investigate the effects of zinc oxide quantum dots (ZnO-QDs) on growth performance, redox status, and gut microbiota in broilers challenged with C. perfringens. A total of 320 1-day-old chicks were divided into five groups: negative control (NC) without treatment; positive control (PC) infected with C. perfringens; and the other three groups (40, 80, and 120 Zn) were given ZnO-QDs at doses of 40, 80, and 120 mg/kg, respectively, under C. perfringens infection, respectively. The results show that, compared to the NC group, the PC group exhibited negative effects on growth performance, intestinal morphology, and antioxidant status in broilers. However, compared to the PC group, 120 mg Zn increased (p < 0.05) the body weight of broilers at 21 days, while 40 mg Zn reduced (p < 0.05) serum diamine oxidase activity. The intestinal macroscopic evaluation showed that the PC group had the highest lesion scores, whereas the 120 mg Zn group exhibited the lowest lesion score. Meanwhile, compared to the PC group, the 40 mg Zn group had higher (p < 0.05) CAT and GPX activities and a lower (p < 0.05) MDA concentration. Moreover, the 40 mg Zn group up-regulated (p < 0.05) the gene expression of Cathelicidin-1, IL-10, Claudin-1, and MLCK in the jejunum. Furthermore, the 120 mg Zn group increased (p < 0.05) the abundance of Blautia, Parasutterella, and Lachnospiraceae FCS020 in the cecum. In conclusion, ZnO-QDs exerted a beneficial effect on improving growth performance and overall health in broilers under C. perfringens infection, potentially by regulating redox balance and gut microbiota. Full article

Zinc oxide (ZnO) and iron oxide (IO) nanoparticles have been identified as promising candidates for biomedical applications, based on their unique physicochemical properties. The association of these nanoparticles in a single system creates a bimodal entity, allowing the excellent luminescent properties of ZnO quantum dots to be combined with the contrast agent of IO for magnetic resonance imaging (MRI). The present study focuses on the luminescent and MRI properties of a new poly(lactic-co-glycolic acid) (PLGA) nanocarrier system formulation containing ZnO NPs and IO NPs in different nominal ratios. Microscopic analysis (TEM and SEM) reveals a circular morphology with IO and ZnO NPs. The average diameter of the particles was determined to be 220 nm, as measured by DLS. The luminescence results indicate that the PLGA system shows strong emission in the visible range, and the MRI analysis shows a high r2 relaxivity of 171 mM⁻¹ s⁻¹ at 7T. The optimized formulation, exhibiting a molar ratio of Fe:Zn ranging from 1:10 to 1:13 (mol:mol), demonstrates superior fluorescence and MRI performance, underscoring the significance of nanoparticle composition in bimodal imaging applications. The systems evaluated demonstrate no toxicity in the THP-1 cells for doses of up to 128 µg mL⁻¹, with efficient labeling after 4 h of incubation, yielding images of strong luminescence and T2 contrast. The PLGA:ZnO:IO system demonstrates considerable potential as a bimodal platform for diagnostic imaging. Full article

Recently, the numerical simulation of solar cells has attracted tantamount scientific attention in the photovoltaic community because it saves on research time and resources before the actual fabrication of the devices in the laboratories. Despite significant advancements in the fabrication of quantum dot-sensitized solar cells (QDSSCs), the power conversion efficiency (PCE) is still low when compared to other solar cells such as perovskite. This efficiency gap poses a substantial challenge in harnessing the full potential of QDSSCs for widespread adoption in renewable energy applications. Enhancing the efficiency of QDSSCs is imperative for their commercial viability and widespread deployment. In this work, SCAPS-1D was used in the simulation of QDSSCs. The solar cell with a general configuration of FTO/TiO₂/PbS/HTL/Au was investigated. In the device, PbS quantum dots were inserted as the absorber layer, TiO₂ as the electron transport layer (ETL), gold as the back contact, and the following inorganic materials, i.e., copper (I) iodide (CuI), copper (I) oxide (Cu₂O), cadmium zinc telluride selenide (CZTSe), copper iron tin sulfide (CFTS), and copper zinc tin sulfide selenide (CZTSSe) were tested as HTL materials, and FTO acted as the conductive substrate. The best HTL material (CZTSSe) exhibited a PCE of 22.61%, with a fill factor (FF) of 84.67%, an open circuit voltage (V_oc) of 0.753 V, and a current density (J_sc) of 35.48 mA cm⁻². This study contributes to the field by employing SCAPS-1D simulations to optimize QDSSCs, exploring novel inorganic HTL materials for these solar cells and identifying CZTSSe as a promising low-cost HTL that significantly enhances both the performance and commercial viability of QDSSCs. Full article

Silicon-based solar cells dominate the photovoltaic market, with commercial monocrystalline silicon cells reaching efficiencies as high as 27.3% by May 2024. An alternative to monocrystalline silicon solar cells is polycrystalline solar cells. Despite their lower efficiency (record: 23.81%), their manufacturing process is simpler and cheaper, and their energy conversion efficiency is less sensitive to temperature changes. However, limitations persist in optical and electrical losses, particularly underutilizing ultraviolet (UV) radiation due to silicon’s bandgap. To address these issues, the application of down-converting materials like zinc oxide (ZnO) quantum dots (QDs) has gained attention. ZnO QDs absorb high-energy UV light and re-emit it in the visible spectrum, optimizing the portion of solar energy usable by silicon cells. This study explores the synthesis of ZnO QDs using a sol–gel method, followed by their application on polycrystalline silicon solar cells. Experimental results indicated an increase in short-circuit current and overall efficiency, with the efficiency rising from 18.67% to a maximum of 19.05% when ZnO QDs were deposited from a 5 mg/mL solution. These findings suggest that ZnO QDs could significantly enhance solar energy conversion efficiency by utilizing portions of the solar spectrum that would otherwise be wasted. Full article

In recent years, nanomaterials have gained special attention for removing contaminants from wastewater. Nanoparticles (NPs), such as carbon-based materials and metal oxides, exhibit exceptional adsorption capacity and antimicrobial properties for wastewater treatment. Their unique properties, including reactivity, high surface area, and tunable surface functionalities, make them highly effective adsorbents. They can remove contaminants such as organics, inorganics, pharmaceuticals, medicine, and dyes by adsorption mechanisms. In this review, the effectiveness of different types of carbon-based NPs, including carbon nanotubes (CNTs), graphene-based nanoparticles (GNPs), carbon quantum dots (CQDs), carbon nanofibers (CNFs), and carbon nanospheres (CNSs), and metal oxides, including copper oxide (CuO), zinc oxide (ZnO), iron oxide (Fe₂O₃), titanium oxide (TiO₂), and silver oxide (Ag₂O), in the removal of different contaminants from wastewater has been comprehensively evaluated. In addition, their synthesis methods, such as physical, chemical, and biological, have been described. Based on the findings, CNPs can remove 75 to 90% of pollutants within two hours, while MONPs can remove 60% to 99% of dye in 150 min, except iron oxide NPs. For future studies, the integration of NPs into existing treatment systems and the development of novel nanomaterials are recommended. Hence, the potential of NPs is promising, but challenges related to their environmental impact and their toxicity must be considered. Full article

We conducted experiments utilizing the scattering effect of zinc oxide (ZnO) to enhance the photoluminescence (PL) intensity of cesium lead bromide (CsPbBr₃) perovskite quantum dots (QDs). This study involved investigating the method for creating a CsPbBr₃ and ZnO mixture and determining the optimal mixing ratio. A mixture dispersion of CsPbBr₃ and ZnO, prepared at a 1:0.015 weight ratio through shaking, was fabricated into a film using the spin coating method. The PL intensity of this film showed a relative increase of 20% compared to the original CsPbBr₃ QD film without ZnO. The scattering effect of ZnO was confirmed through ultraviolet-visible (UV-Vis) absorption and transient PL experiments, and a long-delayed exciton lifetime was observed in the optimized mixture dispersion thin film. The morphology of the fabricated film was characterized using field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), and atomic force microscopy (AFM). For the CsPbBr₃-ZnO mixture (1:0.0015) film, crystal domains of approximately 10 nm were observed using TEM. Through AFM analysis, an excellent film roughness of 4.6 nm was observed, further confirming the potential of perovskite QD/ZnO composite films as promising materials for enhanced photoconversion intensity. In future studies, applying this method to other perovskite materials and metal oxides for the optimization of photoconversion composite materials is expected to enable the fabrication of highly efficient perovskite QD/metal oxide composite films. Full article

The biomedical area uses nanostructured materials to maximize therapeutic advantages while minimizing invasiveness and toxicity. Their applications include drug delivery, therapy activation, diagnostics, and real-time therapeutic response monitoring. The development of materials for sensors and electrochemical analysis has become essential for monitoring biomolecules. The concentration, size, and dispersion of nanoparticles in the carbonaceous matrix are the main factors that influence the conductivity of nanocomposites. The strong interactions and high surface energy of graphene materials often moderate its homogeneous compatibility with various media. In the present work, we propose the synthesis of zinc oxide quantum dots (ZnO QDs) and their integration with carbonaceous materials to create nanocomposites with electrochemical uses. ZnO QDs were obtained through the precipitation method. Graphene oxide (GO) was synthesized using the Hummer technique. ZnO-GO was obtained via the in situ hydrothermal method. The samples were characterized through a variety of analytical methods to understand their morphology, size, structural phase purity, functional groups, and wetting capacity. Using spectroscopic analysis, the materials—the oxide, the carbonaceous material, and the composite—were examined from a structural perspective. Using a field-emission scanning electron microscope, the surface morphology, particle size, and distribution of the nanoparticles in the carbon material were investigated. The goniometric investigations monitored the nanocomposite’s wetting and percolation capacities. Full article

Visible light photodetectors are extensively researched with transparent metal oxide holes/electron layers for various applications. Among the metal oxide transporting layers, nickel oxide (NiO) and zinc oxide (ZnO) are commonly adopted due to their wide band gap and high transparency. The objective of this study was to improve the visible light detection of NiO/ZnO photodiodes by introducing an additional quantum dot (QD) layer between the NiO and ZnO layers. Utilizing the unique property of QDs, we could select different sizes of QDs and responsive light wavelength ranges. The resulting red QDs utilized device that could detect light starting at 635 nm to UV (Ultra-violet) light wavelength and exhibited a photoresponsivity and external quantum efficiency (EQE) of 14.99 mA/W and 2.92% under 635 nm wavelength light illumination, respectively. Additionally, the green QDs, which utilized a device that could detect light starting at 520 nm, demonstrated photoresponsivity values of 8.34 mA/W and an EQE of 1.99% under 520 nm wavelength light illumination, respectively. In addition, we used X-ray photoelectron spectroscopy (XPS) and ultraviolet photoelectron spectroscopy (UPS) to investigate the origin of the photocurrents and the enhancement of the device’s performance. This study suggests that incorporating QDs with metal oxide semiconductors is an effective approach for detecting visible light wavelengths in transparent optoelectronic devices. Full article

With the urgent demand for clean energy, rechargeable zinc–air batteries (ZABs) are attracting increasing attention. Precious-metal-based electrocatalysts (e.g., commercial Pt/C and IrO₂) are reported to be highly active towards the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER). Nevertheless, the limited catalytic kinetics, along with the scarcity of noble metals, still hinder the practical applications of ZABs. Consequently, it is of great importance to explore efficient bifunctional ORR/OER electrocatalysts with abundant reserves. Although iron oxides are considered to have some of the greatest potential as catalysts among the metal oxides, owing to their excellent redox properties, lower toxicity, simple preparation, and natural abundance, their poor electrical conductivity and high agglomeration still limit their development. In this work, we report a special Se quantum dots@ CoFeO_x (Se-FeO_x-Co) composite material, which exhibits outstanding bifunctional catalytic properties. And the potential gap between ORR and OER is low at 0.87 V. In addition, the ZAB based on Se-FeO_x-Co achieves a satisfactory open-circuit voltage (1.46 V) along with an operation durability over 800 min. This research explores an effective strategy to fabricate iron oxide-based bifunctional catalysts, which contributes to the future design of related materials. Full article

Timely diagnosis and appropriate antitumoral treatments remain of utmost importance, since cancer remains a leading cause of death worldwide. Within this context, nanotechnology offers specific benefits in terms of cancer therapy by reducing its adverse effects and guiding drugs to selectively target cancer cells. In this comprehensive review, we have summarized the most relevant novel outcomes in the range of 2010–2023, covering the design and application of nanosystems for cancer therapy. We have established the general requirements for nanoparticles to be used in drug delivery and strategies for their uptake in tumor microenvironment and vasculature, including the reticuloendothelial system uptake and surface functionalization with protein corona. After a brief review of the classes of nanovectors, we have covered different classes of nanoparticles used in cancer therapies. First, the advances in the encapsulation of drugs (such as paclitaxel and fisetin) into nanoliposomes and nanoemulsions are described, as well as their relevance in current clinical trials. Then, polymeric nanoparticles are presented, namely the ones comprising poly lactic-co-glycolic acid, polyethylene glycol (and PEG dilemma) and dendrimers. The relevance of quantum dots in bioimaging is also covered, namely the systems with zinc sulfide and indium phosphide. Afterwards, we have reviewed gold nanoparticles (spheres and anisotropic) and their application in plasmon-induced photothermal therapy. The clinical relevance of iron oxide nanoparticles, such as magnetite and maghemite, has been analyzed in different fields, namely for magnetic resonance imaging, immunotherapy, hyperthermia, and drug delivery. Lastly, we have covered the recent advances in the systems using carbon nanomaterials, namely graphene oxide, carbon nanotubes, fullerenes, and carbon dots. Finally, we have compared the strategies of passive and active targeting of nanoparticles and their relevance in cancer theranostics. This review aims to be a (nano)mark on the ongoing journey towards realizing the remarkable potential of different nanoparticles in the realm of cancer therapeutics. Full article

Thin-film photodiodes (TFPD) monolithically integrated on the Si Read-Out Integrated Circuitry (ROIC) are promising imaging platforms when beyond-silicon optoelectronic properties are required. Although TFPD device performance has improved significantly, the pixel development has been limited in terms of noise characteristics compared to the Si-based image sensors. Here, a thin-film-based pinned photodiode (TF-PPD) structure is presented, showing reduced kTC noise and dark current, accompanied with a high conversion gain (CG). Indium-gallium-zinc oxide (IGZO) thin-film transistors and quantum dot photodiodes are integrated sequentially on the Si ROIC in a fully monolithic scheme with the introduction of photogate (PG) to achieve PPD operation. This PG brings not only a low noise performance, but also a high full well capacity (FWC) coming from the large capacitance of its metal-oxide-semiconductor (MOS). Hence, the FWC of the pixel is boosted up to 1.37 Me- with a 5 μm pixel pitch, which is 8.3 times larger than the FWC that the TFPD junction capacitor can store. This large FWC, along with the inherent low noise characteristics of the TF-PPD, leads to the three-digit dynamic range (DR) of 100.2 dB. Unlike a Si-based PG pixel, dark current contribution from the depleted semiconductor interfaces is limited, thanks to the wide energy band gap of the IGZO channel material used in this work. We expect that this novel 4 T pixel architecture can accelerate the deployment of monolithic TFPD imaging technology, as it has worked for CMOS Image sensors (CIS). Full article

Streptococcus agalactiae is a significant pathogen that can affect both human beings and animals. The extensive current use of antibiotics has resulted in antibiotic resistance. In our previous research, we found that zinc oxide quantum dots (ZnO QDs) had inhibitory effects on antibiotic-resistant microorganisms. In this study, a strain of Streptococcus agalactiaeWJYT1 with a broad antibiotic-resistant spectrum was isolated and identified from Lama glama at Sichuan Agricultural University Teaching Animal Hospital. The genome for the resistance and virulence genes was analyzed. Additionally, the antibacterial effects and anti-virulence mechanism of ZnO QDs for S. agalactiaeWJYT1 were investigated. The results showed that the genome of S. agalactiaeWJYT1 is 1,943,955 bp, containing 22 resistance genes and 95 virulence genes. ZnO QDs have a good antibacterial effect against S. agalactiaeWJYT1 by reducing bacterial growth and decreasing the expression of virulence genes, including bibA, hylB, sip, and cip, which provides a novel potential treatment for S. agalactiae. Full article

The vacuum-free quantum dots solar cell (VFQDSC) was fabricated without using any vacuum process. The spherical iron pyrite (FeS₂) nanoparticles (SNPs) and ZnO nanoparticles (NPs) were synthesized and characterized. In the device structure, FeS₂ SNPs were used as an acceptor material (n-type), and the low band gap polymer of poly[4,8-bis(2-ethylhexyloxyl)benzo[1,2-b:4,5-b′]-dithiophene-2,6-diyl-alt-ethylhexyl-3-fluorothieno[3,4-b]thiophene-2-carboxylate-4,6-diyl] (PBT7) was used as a donor material (p-type). In this study, we first applied the graphene oxide (GO) as the hole transport buffer layer (HTBL) and zinc oxide (ZnO) as an electron transport buffer layer (ETBL), which were considered to improve the charge transportation efficiency of the device’s system. The device with the structure of the Glass/ITO/HTBL/FeS₂ SNPs, PBT7/ ETBL/E-GaIn were fabricated with a maximum power conversion efficiency (PCE) of 3.6%. Full article

Indium phosphide (InP) colloidal quantum dots (CQDs) have generated great interest as next-generation light-emitting materials owing to their narrow emission spectra and environment-friendly components. The minimized surface defects is essential to achieve narrow full-width at half-maximum (FWHM) and high photoluminescence quantum yield (PLQY). However, InP CQDs are readily oxidized in ambient condition, which results in formation of oxidation defect states on the surface of InP CQDs. Herein, we introduce a strategy to successfully passivate the surface defects of InP core by zinc complexes. The zinc carboxylates passivation reduces FWHM of InP CQDs from 130 nm to 70 nm and increases PLQY from 1% to 14% without shelling. Furthermore, the photoluminescence (PL) peak has shifted from 670 nm to 510 nm with an increase of zinc carboxylates passivation, which suggests that excessive zinc carboxylates functions as a size-regulating reagent in the synthesis. Full article

The remarkable photoluminescent properties, biocompatibility, biodegradability, and antibacterial properties of zinc oxide quantum dots (ZnO QDs) coupled with their low cost and nanoscale size guarantee bio-related and technological applications. However, the effect of the polymeric ligand during synthesis has hardly been investigated compared to other less environmentally friendly QDs. Thus, the objective of this work was to focus on the synthesis of fluorescent hybrid ZnO QDs by the sol-gel method using different polymers with hydroxyl groups as templates and ligands to obtain stable particles in different media. For this purpose, well-defined hydroxylated statistical polymers and block copolymers were synthesized using reversible-addition fragmentation chain transfer (RAFT) polymerization to establish the influence of molecular weight, hydrophobic/hydrophilic balance, and polymer architecture on the colloidal and photophysical properties of the synthesized hybrid ZnO QDs. Dynamic light scattering (DLS), TEM, and X-ray diffraction measurements indicated the formation of stable nanoparticles of a few nanometers. A remarkable enhancement in terms of fluorescence was observed when ZnO QDs were synthesized in the presence of the hydroxylated homopolymers and even more so with block copolymers architecture. Organosilanes combined with the hydroxylated polymers were used to improve the colloidal stability of ZnO QDs in aqueous media. These samples exhibited uniform and stable enhanced photoluminescence for nearly five months of being investigated. Among other applications, the hybrid ZnO QDs synthesized in this work exhibit high selectivity to detect Cr⁶⁺, Fe²⁺, or Cu²⁺ in water. Full article