Search Results (5)

The atmospheric boundary layer is a crucial transitional region connecting the surface with the free atmosphere, playing a bridging role in land-sea-air interactions and the interactions between different atmospheric layers. This study utilizes rotary-wing UAVs, high-resolution lidar, and WRF simulation data to analyze the vertical distribution characteristics of temperature, humidity, wind speed, and wind direction boundary layer over the Mount Si’e region in 4–6 April 2024. The results indicate that the boundary layer temperature decreases with increasing altitude, reaching up to 18°C, while humidity decreases with height, dropping to as low as 35%. Daytime wind speeds range from 4 to 8 m/s, decreasing to 2 to 4 m/s at night. The boundary layer height can reach up to 900 m during the day and drops to 100–200 m at night, showing distinct diurnal variation characteristics. UAV observations are in good agreement with lidar and WRF simulation results, highlighting the application value of UAVs in high temporal and spatial resolution boundary layer studies. The study also reveals the significant impact of complex terrain on boundary layer characteristics, providing scientific insights into the dynamic and thermal processes of the boundary layer and offering reference value for improving regional weather forecasting and numerical simulations. Full article

Subsoiling is an essential practice in conservation tillage technology. The amount of disturbed soil at various depths resulting from subsoilers with different parameters has an important effect on soil properties (e.g., bulk density and water infiltration). The information regarding the effects of subsoiling on the characteristics of soil water infiltration is essential for the design of subsoiling tools. In this study, the effects of the wing mounting height (h) (75–155 mm) of the subsoiler on soil disturbance and soil water infiltration were modelled using HYDRUS-2D and validated using field experiments. Results showed that reducing h values resulted in larger soil disturbance area ratios, soil water infiltration rates (f(t)), distances of vertical wetting front movement (DVWs), accumulative infiltrations (AINs), and soil moisture contents at depths of 10–30 cm. The relationships among characteristics of soil water infiltration, h and time (t), were developed. The stable infiltration rates (f_s) varied quadratically with h and the corresponding coefficient of determination (R²) was 0.9869. The Horton model is more suitable for describing the relationship between f(t) and t under the tested soil conditions, as compared with the Kostiakov and Philip models. According to the results of soil water content at different depths from the HYDRUS simulations and field experiments, the developed soil water infiltration model had a good accuracy, as indicated by RMSEs of <0.05, R² values of >0.95, and mean relative errors of <12%. The Above results indicated that increasing the hardpan disturbance by optimizing wing parameters of the subsoiler could improve soil water infiltration characteristics. Full article

Multi-rotor plant protection Unmanned Aerial Vehicles (UAVs) have suitable terrain adaptability and efficient ultra-low altitude spraying capacity, which is a significant development direction in efficient plant protection equipment. The interaction mechanisms of the wind field, droplet, and crop are unclear, and have become the bottleneck factor restricting the improvement of the deposition quality. This paper suggests a method to study the influence of the pesticide load on the detailed distribution law of downwash for a six-rotor UAV. Based on a hexahedral structured mesh, a 3D numerical calculation model was established. Analysis showed that the relative errors between the simulated and measured velocities in the z-axis were less than 11% when the downwash air flow was stable. Numerical simulations were carried out for downwash in hover under 0, 1, 2, 3, 4, and 5 kg loads. The effect of load on the airflow was evident, and the greater the load was, the higher the wind speed of downwash would be. Then, the influence of wing interference on the distribution of airflow would be more pronounced. Furthermore, under the rotation of the rotor and the extrusion of external atmospheric pressure, the “trumpet” phenomenon appeared in the downwash airflow area. As an extension, the phenomenon of the “shrinkage–expansion” was shown in the longitudinal section under heavy load, while the phenomenon of “shrinkage–expansion–shrinkage” was present under light load. After that, based on the detailed analysis of the downwash wind field, the spray height of this multi-rotor UAV was suggested to be 2.5 m or higher, and the nozzle was recommended to be mounted directly under the rotor and to have the same rotation direction as the rotor. The research in this paper lays a solid foundation for the proposal of the three-zone overlapping matching theory of wind field, droplet settlement, and canopy shaking. Full article

Subsoiling is an effective practice to promote better soil water infiltration and crop growth. The information regarding the variation and persistence of subsoiling effects with different soil disturbance on soil properties and crop growth was absent in previous research. In this study, the effects of wing mounting height (h) (75–155 mm) during subsoiling on soil disturbance at various layers, soil properties and crop performance were investigated using in situ field experiments from 2019 to 2021 in winter wheat–summer maize rotations. The experimental field soil was covered with crop stubble and crop straw was removed before subsoiling or sowing the next crop. The analysis of variance (ANOVA) was used to assess different subsoiling treatment effects on tested variables, including soil moisture content, bulk density, plant diameter, plant height, dry root weight, root number, yield, and yield components of crops. Means between subsoiling treatments were compared using Duncan’s multiple range tests. Based on ANOVA outputs, the h significantly (p < 0.05) affected soil moisture content in the first growing season of winter wheat (WW1), soil bulk density, number of roots and panicle number and grain yield of WW1, and thousand kernel weight (TKW) of both WW1 and summer maize (SM). Decreasing h overall gave better soil properties and crop performance. Decreased subsoiling effects were found on aspects of insignificant difference in subsequent grain yield of SM and winter wheat in the second growing season (WW2). These findings had implications for designing higher-performance winged subsoilers, as well as selection of subsoiling frequency. Full article

Coastal dunes have global importance as ecological habitats, recreational areas, and vital natural coastal protection. Dunes evolve due to variations in the supply and removal of sediment via both wind and waves, and on stabilization through vegetation colonization and growth. One aspect of dune evolution that is poorly understood is the longshore variation in dune response to morphodynamic forcing, which can occur over small spatial scales. In this paper, a fixed wing unmanned aerial vehicle (UAV), is used to measure the longshore variation in evolution of a dune system in a megatidal environment. Dune sections to the east and west of the study site are prograding whereas the central portion is static or eroding. The measured variation in dune response is compared to mesoscale intertidal bar migration and short-term measurements of longshore variation in wave characteristics during two storms. Intertidal sand bar migration is measured using satellite imagery: crescentic intertidal bars are present in front of the accreting portion of the beach to the west and migrate onshore at a rate of 0.1–0.2 m/day; episodically the eastern end of the bar detaches from the main bar and migrates eastward to attach near the eastern end of the study area; bypassing the central eroding section. Statistically significant longshore variation in intertidal wave heights were measured using beachface mounted pressure transducers: the largest significant wave heights are found in front of the dune section suffering erosion. Spectral differences were noted with more narrow-banded spectra in this area but differences are not statistically significant. These observations demonstrate the importance of three-dimensionality in intertidal beach morphology on longshore variation in dune evolution; both through longshore variation in onshore sediment supply and through causing longshore variation in near-dune significant wave heights. Full article