Search Results (6,312)

Wind turbine (WT) misalignment fault diagnosis is constrained by critical signal processing challenges: weak fault features, intense background noise, and poor generalization. This study proposes a lightweight method for high-precision fault diagnosis. A fixed-threshold wavelet denoising method with the scene-specific pre-optimized parameter a (0 < a ≤ 1.3) is proposed: the parameter a is determined via offline grid search using the feature retention rate (FRR) as the objective function for typical wind farm operating scenarios. A multi-scale depthwise separable CNN (MS-DSCNN) captures multi-scale spatial features via 3 × 1 and 5 × 1 kernels, reducing computational complexity by 73.4% versus standard CNNs. An attention-based minimal peephole LSTM (AttMPLSTM) enhances temporal feature measurement, using minimal peephole connections for long-term dependencies and channel attention to weight fault-relevant signals. Joint L1–L2 regularization mitigates overfitting and environmental interference, improving model robustness. Validated on a WT test bench, the Adams simulation dataset, and the CWRU benchmark, the model achieves a 90.2 ± 1.4% feature retention rate (FRR) in signal processing, an over 98% F1-score for fault classification, and over 99% accuracy. With 2.5 s single-epoch training and a 12.8 ± 0.5 ms single-sample inference time, the reduced parameters enable real-time deployment in embedded systems, advancing signal processing for rotating machinery fault diagnosis. Full article

The rapid global expansion of offshore wind energy (OWE) has established it as a critical component of the renewable energy transition; however, this development concurrently introduces significant underwater noise pollution into marine ecosystems. This paper provides a comprehensive review of the acoustic footprint of OWE across its entire lifecycle, rigorously distinguishing between the high-intensity, acute impulsive noise generated during pile-driving construction and the chronic, low-frequency continuous noise associated with decades-long turbine operation. We critically evaluate the engineering capabilities and limitations of current underwater acoustic monitoring architectures, including buoy-based real-time monitoring nodes, cabled high-bandwidth systems (e.g., cabled hydrophone arrays with DAQ/DSP and fiber-optic distributed acoustic sensing, DAS), and autonomous seabed archival recorders (PAM deployment). Furthermore, documented biological impacts are synthesized across diverse taxa, ranging from auditory masking and threshold shifts in marine mammals to the often-overlooked sensitivity of invertebrates and fish to particle motion—a key metric frequently missing from standard pressure-based assessments. Our analysis identifies a fundamental gap in current governance paradigms, which disproportionately prioritize the mitigation of short-term acute impacts while neglecting the cumulative ecological risks of long-term operational noise. This review synthesizes recent evidence on chronic operational noise and outlines a conceptual pathway from event-based compliance monitoring toward long-term, adaptive soundscape management. We propose the implementation of integrated, adaptive acoustic monitoring networks capable of quantifying cumulative noise exposure and informing real-time mitigation strategies. Such a paradigm shift is essential for optimizing mitigation technologies and ensuring the sustainable coexistence of marine renewable energy development and marine biodiversity. Full article

An optimal topographical arrangement of wind turbines (WTs) is essential for increasing the total power production of a wind farm (WF). This work introduces PSO-GA, a newly formulated algorithm based on the hybrid of Particle Swarm Optimization (PSO) and the Genetic Algorithm (GA) method, to provide the best possible and reliable WF layout (WFL) for enhanced output power. Because GA improves on PSO-found solutions while PSO investigates several regions; therefore, hybrid PSO-GA can effectively handle issues involving multiple local optima. In the first phase of the framework, PSO improves the original variables; in the second phase, the variables are changed for improved fitness. The goal function takes into account both the power production of the WF and the cost per power while analyzing the wake loss using the Jenson wake model. To evaluate the robustness of this strategy, three case studies are analyzed. The algorithm identifies the best possible position of turbines and strictly complies with industry-standard separation distances to prevent extreme wake interference. This comparative study on the past layout improvement process models demonstrates that the proposed hybrid algorithm enhanced performance with a significant power improvement of 0.03–0.04% and a 24–27.3% reduction in wake loss. The above findings indicate that the proposed PSO-GA can be better than the other innovative methods, especially in the aspects of quality and consistency of the solution. Full article

Wind turbine blades (WTBs) are inevitably exposed to harsh environmental conditions, leading to surface damages such as cracks and corrosion that compromise power generation efficiency. While UAV-based inspection offers significant potential, it frequently encounters challenges in handling irregular defect shapes and preserving fine edge details. To address these limitations, this paper proposes DMR-YOLO, an Improved Wind Turbine Blade Surface Damage Detection Method Based on YOLOv8. The proposed framework incorporates three key innovations: First, a C2f-DCNv2-MPCA module is designed to dynamically adjust feature weights, enabling the model to more effectively focus on the geometric structural details of irregular defects. Secondly, a Multi-Scale Edge Perception Enhancement (MEPE) module is introduced to extract edge textures directly within the network. This approach prevents the decoupling of edge features from global context information, effectively resolving the issue of edge information loss and enhancing the recognition of small targets. Finally, the detection head is optimized using a Re-parameterized Shared Convolution Detection Head (RSCD) strategy. By employing weight sharing combined with Diverse Branch Blocks (DBB), this design significantly reduces computational redundancy while maintaining high localization accuracy. Experimental results demonstrate that DMR-YOLO outperforms the baseline YOLOv8n, achieving a 1.8% increase in mAP@0.5 to 82.2%, with a notable 3.2% improvement in the “damage” category. Furthermore, the computational load is reduced by 9.9% to 7.3 GFLOPs, while maintaining an inference speed of 92.6 FPS, providing an effective solution for real-time wind farm defect detection. Full article

In this study, we investigate how computationally simplified activation functions affect predictive performance, inference latency, and energy usage in long short-term memory-based temperature prediction for wind turbine generator bearings. We tested three different types of long short-term memory (LSTM) cells, along with bidirectional LSTM (biLSTM) networks, to determine their effectiveness in modeling dynamic changes in gearbox bearing temperatures. We compared several activation-function variants, focusing on variants that are either computationally simple or known to give good performance in deep recurrent networks. The results show that the best-performing architectures achieved root mean squared errors (RMSEs) between $0.0798$ and $0.0822$, corresponding to coefficients of determination in the range of $R^2=0.84$–$0.85$. When applied across five turbines, the best-performing architectures (peephole and bidirectional) achieved root mean squared errors of $0.0898$, $0.0882$, and $0.042$, respectively. The best activation function-enhanced variant (the peephole) improved accuracy by approximately $3\%$ while maintaining low model complexity. These findings provide a practical and efficient solution for embedded predictive maintenance systems, providing high accuracy without incurring the computational cost of deeper or bidirectional architectures. Full article

Urban integrated energy systems (UIESs) are increasingly exposed to uncertainties arising from wind and photovoltaic variability, load fluctuations, and equipment failures, highlighting the need for refined reserve assessment and coordinated operation. This study develops a unified framework that jointly models renewable and load deviations together with a load-dependent failure probability model, using Monte Carlo sampling and K-means scenario reduction to obtain representative system states. A reserve-capacity-oriented optimisation model is formulated to minimise total operating cost—including thermal generation, energy-storage operation, and reserve cost—while satisfying power balance, reserve adequacy, unit operating limits, and state-of-charge constraints. Application to a UIES comprising a 1000 kW load, 800 kW photovoltaic unit, 100 kW wind turbine, five thermal power units (total capacity 1000 kW), and a 250 kW/370 kWh energy storage system shows that reserve requirements fluctuate between −100 kW (downward) and 500 kW (upward) across different scenarios, with uncertainty-driven reserves dominating and failure-related reserves remaining below 100 kW. The optimisation results indicate coordinated operation between thermal units and storage, with storage absorbing surplus renewable output, supporting peak shaving, and providing most upward and all downward reserves. The total operating costs under typical summer and winter scenarios are 2264.02 CNY and 3122.89 CNY, respectively, confirming the method’s ability to improve reserve estimation accuracy and support economical and reliable UIES operation under uncertainty. Full article

Bionic airfoils are an effective method to improve aerodynamic performance and reduce the noise of wind turbine blades. To explore the impact of the lower surface of bird wing airfoils on the aerodynamic performance and noise of blades, this study combines the upper surface of the NACA0018 airfoil with the lower surfaces of the teal, long-eared owl, and sparrowhawk (CBA-T, CBA-O, CBA-S) to create three new composite bionic airfoils (CBAs). The aerodynamic performance of these airfoils is evaluated, and the CBA-O airfoil is identified as having the best aerodynamic characteristics. A comparison of the noise and vortex structures of the CBA-O, owl wing airfoil, and NACA0018 is conducted, and the mechanisms behind the CBA-O airfoil performance improvement and noise reduction are explored. The results indicate that the CBAs enhance the aerodynamic performance of the airfoils. Before stall, the aerodynamic performance of the CBA-O improves the lift-to-drag ratio by 12.7% and 119.7% compared to the owl and NACA0018 airfoils, with its average SPL significantly lower than that of the NACA0018. The CBA-O has smaller vortex sizes at the trailing-edge, and the wake vortex develops more stably, effectively reducing both surface radiation noise and wake noise. Full article

Carbon fiber reinforced polymers (CFRPs) are widely used in aerospace and wind power applications, but the complex failure mechanisms of their connection structures pose challenges for connection design. This study aims to investigate the influence of bonding interface inclination angle and connection method on the failure mechanisms of CFRP joints under bending loads. The study investigated two design parameters: the joint geometry of the bonding interface (single-slope, transition-slope, and single-step) and the connection methods (bonding, bolting, and hybrid bonding–bolting). Finite element simulations analyzed the mechanical performance and failure modes under different design parameters. Bending tests validated the mechanical properties of the joint interface, validating the effectiveness of the numerical simulation. The study found that under bonded connections, the bending load increased with the slope of the connection interface, with improvements of 21.87% and 39.75%, respectively. The main reason is stress concentration caused by sharp geometric discontinuities. The hybrid connection had the highest peak load, with improvements of 38.38% and 43.91% compared to the other connection methods. Hybrid bonding–bolting connections further optimized structural performance and damage tolerance. This study reveals the damage mechanisms of the bonding interface and provides a reliable prediction method for aerospace and wind turbine blade applications. Full article

Offshore wind-farm performance remains constrained by persistent wake deficits and turbulence that compound across intra-farm, intra-cluster, and inter-cluster scales, particularly under atmospheric neutral–stable stratification. A concept is advanced whereby offshore wind-farm yield may be augmented by pairing conventional horizontal-axis wind turbines (HAWTs) with lighter-than-air parafoil systems that entrain higher-momentum air and re-energise wakes, complementing yaw/induction-based wake control and enabling higher array energy density. A concise synthesis of wake physics and associated challenges motivates opportunities for active momentum re-injection, while a review of kite technologies frames design choices for lift generation and spatial keeping. Stability and control, spanning static and dynamic behaviours, tether dynamics, and response to extreme meteorological conditions, are identified as key challenges. System-integration pathways are outlined, including alignment and mounting options relative to turbine rows and prevailing shear. A staged validation programme is proposed, combining high-fidelity numerical simulation with wave-tank testing of coupled mooring–tether dynamics and wind-tunnel experiments on scaled arrays. Evaluation metrics emphasise net energy gain, fatigue loading, availability, and Levelized Cost of Energy (LCOE). The paper concludes with research directions and recommendations to guide standards and investment, and with a quantitative assessment of the techno-economic significance of kite–HAWT integration at scale. Full article

To improve the dynamic response and steady-state frequency quality of a wind–storage coordinated system during primary frequency regulation, and to address the secondary frequency dip caused by rotor kinetic energy recovery when a doubly fed induction generator (DFIG)-based wind turbine (DFIG-WT) participates in frequency support, this paper proposes a coordinated wind–storage primary frequency regulation strategy. This strategy synergistically controls the wind turbine’s rotor kinetic energy recovery and exploits the advantages of hybrid energy storage system (HESS). During the DFIG-WT control stage, an adaptive weighted model is developed for the inertial and droop power contributions of the DFIG-WT based on the available rotor kinetic energy, enabling a rational distribution of primary frequency regulation power. In the control segment of HESS, an adaptive complementary filtering frequency division strategy is proposed. This approach integrates an adaptive adjustment method based on state of charge (SOC) to control both the battery energy storage system (BESS) and supercapacitor (SC). Additionally, the BESS assists in completing the rotor kinetic energy recovery process. Through simulation experiments, the results demonstrate that under operating conditions of 9 m/s wind speed and a 30 MW step disturbance, the proposed adaptive weight integrated inertia control elevates the frequency nadir to 49.84 Hz and reduces the secondary frequency dip to 0.0035 Hz. Under the control strategy where wind and storage coordinated participate in frequency regulation and BESS assist in rotor kinetic energy recovery, secondary frequency dips were eliminated, with steady-state frequency rising to 49.941 Hz. The applicability of this strategy was further validated under higher wind speeds and larger disturbance conditions. Full article

This study presents a diffraction analysis of two semi-submersible platform configurations intended for floating offshore wind turbine applications. The first investigated configuration corresponds to a semi-submersible barge with a central moonpool, while the second configuration is a cross-shaped semi-submersible. Both hydrodynamic models were developed and analyzed in OrcaWave. Simulations were performed for wave incidence directions ranging from 0° to 360°. The obtained hydrodynamic coefficients provide insights into the added mass, radiation damping, load response amplitude operators (RAOs) and two types of mean drift loads RAO of both platform types. The results highlight the influence of geometry and displacement on the diffraction performance, which is critical for the design of floating wind turbine support structures. Full article

This paper presents a systematic review conducted under the PRISMA (Preferred Reporting Items for Systematic Reviews and Meta-Analyses) framework, analyzing 286 scientific articles focused on vibration-based predictive maintenance strategies for wind turbines within the context of advanced Prognostics and Health Management (PHM). The review combines international standards (ISO 10816, ISO 13373, and IEC 61400) with recent developments in sensing technologies, including piezoelectric accelerometers, microelectromechanical systems (MEMS), and fiber Bragg grating (FBG) sensors. Classical signal processing techniques, such as the Fast Fourier Transform (FFT) and wavelet-based methods, are identified as key preprocessing tools for feature extraction prior to the application of machine-learning-based diagnostic algorithms. Special emphasis is placed on machine learning and deep learning techniques, including Support Vector Machines (SVM), Random Forest (RF), Convolutional Neural Networks (CNN), Long Short-Term Memory networks (LSTM), and autoencoders, as well as on hybrid digital twin architectures that enable accurate Remaining Useful Life (RUL) estimation and support autonomous decision-making processes. The bibliometric and case study analysis covering the period 2020–2025 reveals a strong shift toward multisource data fusion—integrating vibration, acoustic, temperature, and Supervisory Control and Data Acquisition (SCADA) data—and the adoption of cloud-based platforms for real-time monitoring, particularly in offshore wind farms where physical accessibility is constrained. The results indicate that vibration-based predictive maintenance strategies can reduce operation and maintenance costs by more than 20%, extend component service life by up to threefold, and achieve turbine availability levels between 95% and 98%. These outcomes confirm that vibration-driven PHM frameworks represent a fundamental pillar for the development of smart, sustainable, and resilient next-generation wind energy systems. Full article

The size of offshore wind turbine towers is increasing, and they are subjected to larger and more complex loads, which imposes more stringent requirements on the fatigue performance of welded plates in new offshore wind turbine towers. This study investigated the axial fatigue performance of 25 mm thick welded plates made of the new Q420 steel grade. Fractures in the Q420 welded plates occurred at the junction of the coarse-grained zone of the filler metal and the heat-affected zone. By analyzing the fatigue striation spacing across multiple regions, it was found that the proportion of cycles in the crack propagation stage within the total fatigue life did not exceed 11%, indicating that the crack initiation stage is the decisive factor in the fatigue life of the specimens. Removing surface quality defects at the weld toe significantly increased both the fatigue life and the fatigue strength limit of the Q420 welded plates. Full article

This study proposes a hybrid forecast-enabled adaptive crowbar coordination strategy to enhance low-voltage ride-through (LVRT) performance of doubly fed induction generator (DFIG) wind turbines. A unified electro-mechanical model in the αβ/dq frames with dual closed-loop control for rotor- and grid-side converters is built in MATLAB/Simulink (R2018b), and LVRT constraints on current safety and DC-link energy are explicitly formulated, yielding an engineering crowbar-resistance range of 0.4–0.8 p.u. On the forecasting side, a CEEMDAN-based decomposition–modeling–reconstruction pipeline is adopted: high- and mid-frequency components are predicted by a dual-stream Informer–LSTM, while low-frequency components are modeled by XGBoost. Using six months of wind-farm data, the hybrid forecaster achieves best or tied-best MSE, RMSE, MAE, and R² compared with five representative baselines. Forecasted power, ramp rate, and residual-based uncertainty are mapped to overcurrent and DC-link overvoltage risk indices, which adapt crowbar triggering, holding, and release in coordination with converter control. In a 9 MW three-phase deep-sag scenario, the strategy confines DC-link voltage within ±3% of nominal, shortens re-synchronization from ≈0.35 s to ≈0.15 s, reduces rotor-current peaks by ≈5.1%, and raises the reactive-support peak to 1.7 Mvar, thereby improving LVRT safety margins and grid-friendliness without hardware modification. Full article

Operational expenditure in wind farms is heavily influenced by unplanned maintenance, much of which stems from undetected rotor system faults. Although many fault-detection methods have been proposed, most remain confined to laboratory test. Blade-root bending-moment measurements are among the few techniques applied in the field, yet their reliability is limited by strong sensitivity to varying operational and environmental conditions. This study presents a data-driven rotor health-monitoring framework that enhances the diagnostic value of blade bending-moments. Assuming that the wind speed profile remains approximately stationary over short intervals (e.g., 20 s), a machine-learning model is trained on bending-moment data from healthy blades to predict the incident wind-speed profile under a wide range of conditions. During operation, real-time bending-moment signals from each blade are independently processed by the trained model. A healthy rotor yields consistent wind-speed profile predictions across all three blades, whereas deviations for an individual blade indicate rotor asymmetry. In this study, the methodology is verified using high-fidelity OpenFAST simulations with controlled blade pitch misalignment as a representative fault case, providing simulation-based verification of the proposed framework. Results demonstrate that the proposed inverse-modeling and cross-blade consistency framework enables sensitive and robust detection and localization of pitch-related rotor faults. While only pitch misalignment is explicitly investigated here, the approach is inherently applicable to other rotor asymmetry mechanisms such as mass imbalance or aerodynamic degradation, supporting reliable condition monitoring and earlier maintenance interventions. Using OpenFAST simulations, the proposed framework reconstructs height-resolved wind profiles with RMSE below 0.15 m/s (R² > 0.997) under healthy conditions, and achieves up to 100% detection accuracy for moderate-to-severe pitch misalignment faults. Full article