Search Results (11)

In this study, a vanadyl phthalocyanine was synthesized and characterized using XRD, FTIR, and XPS, confirming the successful metalation of the phthalocyanine ring. XRD analysis showed the vanadyl phthalocyanine crystallized in the P-1 crystal lattice, with unit cell parameters a = 12.058 Å, b = 12.598 Å, and c = 8.719 Å, and the lattice angels were 96.203°, 94.941°, and 68.204°. FTIR spectroscopy supported the metalation by the disappearance of the N-H stretch of the non-metalated phthalocyanine. The vanadyl phthalocyanine was tested as a heterogenous catalyst for the conversion of fructose into methyl levulinate in H₂SO₄–methanol and HCl–methanol systems. The H₂SO₄–methanol reaction system catalyzed with the vanadyl phthalocyanine, and a zeroth-order rate constant of 1.10 × 10⁻⁶ M/s was observed, which was 1.74 times faster than sulfuric acid alone. The HCl–methanol system showed a zeroth-order of reaction with a rate constant of 2.33 × 10⁻⁶ M/s, which was 1.3 times faster than the HCl–methanol alone. While the HCl–methanol system showed a faster reaction rate, product distribution favored methyl levulinate formation in the H₂SO₄–methanol system. The main products identified were methyl levulinate and hepta-2,4-dienoic acid methyl ester, with a minor amount of hydroxymethylfurfural formed. These results suggest that vanadyl phthalocyanine can be effectively used as a catalyst to increase the rate of fructose conversion to methyl levulinate in either H₂SO₄ or HCl–methanol. Full article

Fabrication and characterization based on experimental results for methylammonium lead iodide (MAPbI₃) perovskite solar cells using chemical-substituted metal phthalocyanines (MPc) and naphthalocyanines (MNc) as hole-transport materials have been performed to improve conversion efficiency (η) and stability. The purpose of this study was to fabricate and characterize a MAPbI₃ perovskite solar cell using t-butyl MPc and MNc as a hole-transporting layer to improve the photovoltaic performance and stability of η. Photovoltaic characteristics, morphology, crystallinity, and electronic structures were characterized in perovskite solar cells using MPc and MNc. The photovoltaic performance of the perovskite solar cell using t-butyl nickel phthalocyanine (NiPc) reached the maximum value of η at 13.4%. Incorporation of NiPc passivated the surface morphology by increasing the crystal grain size and supporting the carrier diffusion while suppressing carrier recombination near the grain boundary in the perovskite layer. Simulation using a SCAPS-1D program predicted the photovoltaic characteristics of the perovskite solar cell using NiPc. The photovoltaic mechanism was discussed on the basis of an energy diagram of the perovskite solar cell. The insertion of NiPc optimized energy levels near the highest occupied molecular orbital of NiPc and the valence band state of MAPbI₃, supporting a charge transfer related to short-circuit current density and η. Full article

Metal phthalocyaninates and their higher homologues are recognized as deep-red luminophores emitting from their lowest excited singlet state. Herein, we report on the design, synthesis, and in-depth characterization of a new class of dual-emissive (visible and NIR) metal naphthalocyaninates. A 4-N,N-dimethylaminophen-4-yl-substituted naphthalocyaninato zinc(II) complex (Zn-NMe₂Nc) and the derived water-soluble coordination compound (Zn-NMe₃Nc) exhibit a near-infrared fluorescence from the lowest ligand-centered state, along with a unique push–pull-supported luminescence in the visible region of the electromagnetic spectrum. An unprecedentedly broad structural (2D-NMR spectroscopy and mass spectrometry) as well as photophysical characterization (steady-state state and time-resolved photoluminescence spectroscopy) is presented. The unique dual emission was assigned to two independent sets of singlet states related to the intrinsic Q-band of the macrocycle and to the push–pull substituents in the molecular periphery, respectively, as predicted by TD-DFT calculations. In general, the elusive chemical aspects of these macrocyclic compounds are addressed, involving both reaction conditions, thorough purification, and in-depth characterization. Besides the fundamental aspects that are investigated herein, the photoacoustic properties were exemplarily examined using phantom gels to assess their tomographic imaging capabilities. Finally, the robust luminescence in the visible range arising from the push–pull character of the peripheral moieties demonstrated a notable independence from aggregation and was exemplarily implemented for optical imaging (FLIM) through time-resolved multiphoton micro(spectro)scopy. Full article

A sulfonyl-chloride-modified lignin-based porous carbon-supported metal phthalocyanine catalyst was prepared and used to replace the traditional Fenton’s reagent for lignin degradation. The catalyst underwent a detailed characterization analysis in terms of functional group distributions, surface area, morphological structure, via FT-IR, XPS, BET, and SEM. The catalyst possessed a specific surface area of 638.98 m²/g and a pore volume of 0.291 cm³/g. The prepared catalyst was studied for its ability of oxidative degradation of lignin under different reaction conditions. By optimizing the reaction conditions, a maximum liquid product yield of 38.94% was obtained at 135 °C with 3.5 wt% of catalyst and 15 × 10⁻² mol/L H₂O₂; at the same time, a maximum phenols selectivity of 32.58% was achieved. The compositions and properties of liquid products obtained from lignin degradation using different catalyst concentrations were studied comparatively via GC-MS, FT-IR, ¹H-NMR, and EA. Furthermore, the structure changes of solid residues are also discussed. Full article

Bimetallic catalysts based on multi-walled carbon nanotubes (MWCNT), graphene oxide (GO) and ultradispersed diamonds (UDD) supports for the process of electroreduction of oxygen from alkaline electrolyte were obtained using high-temperature synthesis. The materials were characterized by low-temperature nitrogen adsorption, Raman spectroscopy, scanning electron microscopy and X-ray structure analysis. The synthesized bimetallic catalysts contain meso- and micropores. Based on the study by Raman spectroscopy, it is shown that high-temperature synthesis of MWCNT with metal phthalocyanines leads to doping of this material with nitrogen and the appearance of significant defects in the structure. Carbon nanotube-based catalysts showed enhanced activity compared to other carbon materials. Moreover, bimetallic catalysts based on cobalt phthalocyanine and palladium (MWCNT_CoPc_Pd) are characterized by higher activity on all carbon supports compared to materials contain on copper and palladium. The specific current density in the diffusion region of the MWCNT_CoPc_Pd catalyst is comparable to a commercial platinum electrode (Pt(20%)/C) and equals to 2.65 mA/cm². The area of the electrochemically active surface of all the obtained catalysts was calculated from the CV data in a nitrogen atmosphere. The MWCNT_CoPc_Pd catalyst is characterized by high corrosivity: after 2500 revolutions, the current density in the diffusion region decreases by 7%, and, also, an increase in the values of E_1/2 and E_onset is observed. Full article

Single layer low-dimensional materials are presently of emerging interest, including in the context of magnetism. In the present report, on-surface supramolecular architecturing was further developed and employed to create surface supported two-dimensional binary spin arrays on atomically clean non-magnetic Au(111). By chemical programming of the modules, different checkerboards were produced combining phthalocyanines containing metals of different oxidation and spin states, diamagnetic zinc, and a metal-free ‘spacer’. In an in-depth, spectro-microscopy and theoretical account, we correlate the structure and the magnetic properties of these tunable systems and discuss the emergence of 2D Kondo magnetism from the spin-bearing components and via the physico-chemical bonding to the underlying substrate. The contributions of the individual elements, as well as the role of the electronic surface state in the bottom substrate, are discussed, also looking towards further in-depth investigations. Full article

The in situ spectroelectrochemical cyclic voltammetric studies of the antimony-monocapped nickel(II) and iron(II) tris-pyridineoximates with a labile triethylantimony cross-linking group and Zr(IV)/Hf(IV) phthalocyaninate complexes were performed in order to understand the nature of the redox events in the molecules of heterodinuclear zirconium(IV) and hafnium(IV) phthalocyaninate-capped derivatives. Electronic structures of their 1e-oxidized and 1e-electron-reduced forms were experimentally studied by electron paramagnetic resonance (EPR) spectroscopy and UV−vis−near-IR spectroelectrochemical experiments and supported by density functional theory (DFT) calculations. The investigated hybrid molecular systems that combine a transition metal (pseudo)clathrochelate and a Zr/Hf-phthalocyaninate moiety exhibit quite rich redox activity both in the cathodic and in the anodic region. These binuclear compounds and their precursors were tested as potential catalysts in oxidation reactions of cyclohexane and the results are discussed. Full article

In this study, a series of new metal phthalocyanines with imidazole function MPc(Imz) (M: Cd, Hg, Zn and Pd) were synthesized to improve the photocatalyst performances. All physical properties such as total energy, HOMO, LUMO energies of MPc(Imz), as well as their vibrational frequencies have been determined by DFT method using B3LYP theory level at 6-311G (d, p) and sdd basis set. The gap of energy level between work function (WF) of ITO and LUMO of PdPc(Imdz) was 1.53 eV and represents the highest barrier beneficial to electron injection compared to WF of ZnPc(Imz), HgPc(Imz), and CdPc(Imz). Furthermore, the PdPc(Imdz) thin films on indium tin oxide (ITO) glass were prepared by spin coating and vacuum evaporation technique, and were characterized by X-ray diffraction (XRD), surface electron morphology (SEM), atomic force microscopy (AFM), and UV–Vis spectroscopy. The photocatalytic activity of the ITO/glass supported thin films and degradation rates of chlorinated phenols in synthetic seawater, under visible light irradiation were optimized to achieve conversions of 80–90%. Experiments on synthetic seawater samples showed that the chloride-specific increase in photodegradation could be attributed to photochemically generated chloride radicals rather than other photoproduced reactive intermediates [e.g., excited-state triplet PdPc(Imz) (³PdPc(Imz)*), reactive oxygen species]. The major 2,3,4,5-Tetrachlorophenol degradation intermediates identified by gas chromatography-mass spectrometry (GC/MS) were 2,3,5-Trichlorophenol, 3,5-dichlorophenol, dichlorodihydroxy-benzene and 3,4,5-trichlorocatechol. Full article

Carbon nanotubes and other forms of carbon nanoparticles, as well as metal nanoparticles have been widely used in film electrochemistry because they allow for the immobilization of larger amounts of catalyst (either biological or inorganic) on the top of the modified electrodes. Nevertheless, those nanoparticles present high costs of synthesis and of separation and purification that hamper their employment. On the other hand, imogolites (Im), with the general formula (OH)₃Al₂O₃SiOH, are naturally-occurring nanomaterials, which can be obtained from glassy volcanic ash soils and can also be synthesized at mild conditions. In this research paper, we characterize through spectroscopic techniques (i.e., fourier transform infrared spectroscopy (FTIR) spectroscopy, powder X-ray diffraction (XRD) and transmission electron microscopy (TEM)) synthetized Im and Fe-modified imogolite (Im(Fe)). Moreover, the Im and Im(Fe) were physically adsorbed on the top of a graphite electrode (GE) and were characterized electrochemically in the potential region ranging from −0.8 to 0.8 V vs. the saturated calomel electrode (SCE). When the film of the Im or of the Im(Fe) was present on the top of the electrode, the intensity of the charging/discharging current increased two-fold, but no redox activity in the absence of O₂ could be appreciated. To show that Im and Im(Fe) could be used as support for catalysts, iron phthalocyanine (FePc) was adsorbed on the top of the Im or Im(Fe) film, and the electrocatalytic activity towards the O₂ reduction was measured. In the presence of the Im, the measured electrocatalytic current for O₂ reduction increased 30%, and the overpotential drastically decreased by almost 100 mV, proving that the Im can act as a good support for the electrocatalysts. Full article

Ni- and Cu/alumina powders were prepared and characterized by X-ray diffraction (XRD), scanning electronic microscope (SEM), and N₂ physisorption isotherms were also determined. The Ni/Al₂O₃ sample reveled agglomerated (1 μm) of nanoparticles of Ni (30–80 nm) however, NiO particles were also identified, probably for the low temperature during the H₂ reduction treatment (350 °C), the Cu/Al₂O₃ sample presented agglomerates (1–1.5 μm) of nanoparticles (70–150 nm), but only of pure copper. Both surface morphologies were different, but resulted in mesoporous material, with a higher specificity for the Ni sample. The surfaces were used in a new proposal for producing copper and nickel phthalocyanines using a parallel-plate reactor. Phthalonitrile was used and metallic particles were deposited on alumina in ethanol solution with CH₃ONa at low temperatures; ≤60 °C. The mass-transfer was evaluated in reaction testing with a recent three-resistance model. The kinetics were studied with a Langmuir-Hinshelwood model. The activation energy and Thiele modulus revealed a slow surface reaction. The nickel sample was the most active, influenced by the NiO morphology and phthalonitrile adsorption. Full article

Experimental data concerning the changes in the current-voltage (I-V) perfor-mances of a molecular material-based heterojunction consisting of hexadecafluorinatednickel phthalocyanine (Ni(F₁₆Pc)) and nickel phthalocyanine (NiPc),(Au|Ni(F₁₆Pc)|NiPc|Al) are introduced as an unprecedented principle of transduction for gassensing performances. The respective n- and p-type doped-insulator behaviors of therespective materials are supported, owing to the observed changes in surface potential(using the Kelvin probe method) after submission to electron donor (ammonia) and electronacceptor gases (ozone). On the other hand, the bilayer device exhibits strong variations inthe built-in potential of the junction and in its rectification ratio. Moreover, large increasesoccur in forward and reverse currents in presence of ammonia vapors. These make possiblea multimodal principle of detection controlled by a combined effect between theheterojunction and the NiPc|Al contact. Indeed, this metal/organic junction plays a criticalrole regarding the steady asymmetry of the I-V profiles during the device’s doping evenusing high ammonia concentrations. This approach offers a more sophisticated alternative tothe classically studied, but at times rather operation-limited, resistive gas sensors. Full article