Search Results (12)

This paper presents an overview of the application of Raman spectroscopy (RS) in characterizing carotenoids, which have recently gained attention due to new findings on their health-promoting effects and rising demand in the food, pharmaceutical, and cosmetic industries. The backbone structure in the form of a polyene chain makes carotenoids sensitive to Raman spectroscopy, mainly due to the stretching vibrations of their conjugated double bonds. Raman spectroscopy is increasingly used in agricultural and food sciences and technologies as it is a non-preparative, environmentally friendly, fast and efficient method for characterizing target analytes. The application of RS in the qualitative and quantitative analysis of carotenoids requires the careful selection and adjustment of various instrument parameters (e.g., laser wavelength, laser power, spectral resolution, detector type, etc.) as well as performing complex chemometric modeling to interpret the Raman spectra. Most of the studies covered in this review focus more on qualitative than quantitative analysis. The most frequently used laser wavelengths are 1064, 785, and 532 nm, while 633 nm is the least used. Considering the sensitivity and complexity of RS, the present study focuses on the specific and critical points in the analysis of carotenoids by RS. The main methodological and experimental principles in the study of food carotenoids by RS are discussed and best practices recommended, while the future prospects and expectations for a wider application of RS, especially in food quality assessment, are emphasized. New Raman techniques such as Spatially Offset Raman Spectroscopy (SORS), Coherent Anti-Stokes Raman Spectroscopy (CARS) and Stimulated Raman Scattering Spectroscopy (SRS), as well as the application of artificial intelligence, are also described in the context of carotenoids analysis. Full article

Frozen section biopsy, introduced in the early 1900s, still remains the gold standard methodology for rapid histologic evaluations. Although a valuable tool, it is labor-, time-, and cost-intensive. Other challenges include visual and diagnostic variability, which may complicate interpretation and potentially compromise the quality of clinical decisions. Raman spectroscopy, with its high specificity and non-invasive nature, can be an effective tool for dependable and quick histopathology. The most promising modality in this context is stimulated Raman histology (SRH), a label-free, non-linear optical process which generates conventional H&E-like images in short time frames. SRH overcomes limitations of conventional Raman scattering by leveraging the qualities of stimulated Raman scattering (SRS), wherein the energy gets transferred from a high-power pump beam to a probe beam, resulting in high-energy, high-intensity scattering. SRH’s high resolution and non-requirement of preprocessing steps make it particularly suitable when it comes to intrasurgical histology. Combining SRH with artificial intelligence (AI) can lead to greater precision and less reliance on manual interpretation, potentially easing the burden of the overburdened global histopathology workforce. We review the recent applications and advances in SRH and how it is tapping into AI to evolve as a revolutionary tool for rapid histologic analysis. Full article

In this review, the developments of efficient high-power CW orange-lime-green lasers by using intracavity stimulated Raman Scattering (SRS) in Nd-doped vanadate lasers are systematically discussed. The overall properties of the spontaneous Raman spectra in Nd:YVO₄ and Nd:GdVO₄ crystals are overviewed. The critical phase matchings of using the lithium triborate (LBO) crystals for sum frequency generation (SFG) and second harmonic generation (SHG) are thoroughly reviewed. We make a detailed review for achieving the individual green-lime-orange emissions from the self-Raman Nd:YVO₄ and Nd:GdVO₄ lasers with LBO crystals. The following is to review the dual-wavelength operations of the lime-green and orange-green lasers. Finally, the procedure for generating the triple-wavelength operation of orange-lime-green simultaneous emissions is completely described. The present review is expected to be useful for developing compact, efficient, high-power CW visible lasers for applications including medical treatment, biology, spectroscopy, and remote sensing. Full article

Modification of an electrode surface with a selective layer leads to amplification of the electrochemical signal. A film derived from electrochemically oxidized 3-(4-trifluoromethyl)-phenyl)-thiophene deposited on a graphite electrode (ThPhCF₃/G) was used to estimate the affinity for synthetic stimulants (2-aminoindane, buphedrone, naphyrone) using a combination of square wave voltammetry and electrochemical impedance spectroscopy. The modified surface was characterized using Raman spectroscopy, which confirmed that the presence of the –PhCF₃ group is important for the recognition of synthetic stimulants. The determined values of the adsorption constants (K_ads) showed the significance of charge–transfer and/or hydrogen bond interactions between—PhCF₃ groups in the polymeric film and the analyte of interest: buphedrone (9.79 × 10⁵) < naphyrone (1.57 × 10⁶) < 2-AI (1.87 × 10⁶). Compared to electrodes modified with nanomaterial, PThPhCF₃/G-electrodes showed the highest sensitivity in concentration range of 1–11 μmol L⁻¹ at neutral pH and a possibility of detection of 0.43–0.56 μg mL⁻¹ (s_r = 0.05–0.12). The analytical performance of ThPhCF₃/G promises good perspectives for the detection of synthetic stimulants in forensic samples without prior pretreatment. Full article

Despite their relatively low incidence globally, central nervous system (CNS) tumors remain amongst the most lethal cancers, with only a few other malignancies surpassing them in 5-year mortality rates. Treatment decisions for brain tumors heavily rely on histopathological analysis, particularly intraoperatively, to guide surgical interventions and optimize patient outcomes. Frozen sectioning has emerged as a vital intraoperative technique, allowing for highly accurate, rapid analysis of tissue samples, although it poses challenges regarding interpretive errors and tissue distortion. Raman histology, based on Raman spectroscopy, has shown great promise in providing label-free, molecular information for accurate intraoperative diagnosis, aiding in tumor resection and the identification of neurodegenerative disease. Techniques including Stimulated Raman Scattering (SRS), Coherent Anti-Stokes Raman Scattering (CARS), Surface-Enhanced Raman Scattering (SERS), and Tip-Enhanced Raman Scattering (TERS) have profoundly enhanced the speed and resolution of Raman imaging. Similarly, Confocal Laser Endomicroscopy (CLE) allows for real-time imaging and the rapid intraoperative histologic evaluation of specimens. While CLE is primarily utilized in gastrointestinal procedures, its application in neurosurgery is promising, particularly in the context of gliomas and meningiomas. This review focuses on discussing the immense progress in intraoperative histology within neurosurgery and provides insight into the impact of these advancements on enhancing patient outcomes. Full article

Raman enhancement techniques are essential for gas analysis to increase the detection sensitivity of a Raman spectroscopy system. We have developed an efficient Raman enhancement technique called the collision-enhanced Raman scattering (CERS), where the active Raman gas as the analyte is mixed with a buffer gas inside the hollow-core photonic-crystal fiber (HCPCF) of a fiber-enhanced Raman spectroscopy (FERS) system. This results in an enhanced Raman signal from the analyte gas. In this study, we first showed that the intensity of the 587 cm⁻¹ stimulated Raman scattering (SRS) peak of H₂ confined in an HCPCF is enhanced by as much as five orders of magnitude by mixing with a buffer gas such as helium or N₂. Secondly, we showed that the magnitudes of Raman enhancement depend on the type of buffer gas, with helium being more efficient compared to N₂. This makes helium a favorable buffer gas for CERS. Thirdly, we applied CERS for Raman measurements of propene, a metabolically interesting volatile organic compound (VOC) with an association to lung cancer. CERS resulted in a substantial enhancement of propene Raman peaks. In conclusion, the CERS we developed is a simple and efficient Raman-enhancing mechanism for improving gas analysis. It has great potential for application in breath analysis for lung cancer detection. Full article

We previously developed a hollow-core photonic crystal fiber (HCPCF) based Raman scattering enhancement technique for gas/human breath analysis. It enhances photon–gas molecule interactions significantly but is still based on CW laser excitation spontaneous Raman scattering, which is a low-probability phenomenon. In this work, we explored nanosecond/sub-nanosecond pulsed laser excitation in HCPCF based fiber enhanced Raman spectroscopy (FERS) and successfully induced stimulated Raman scattering (SRS) enhancement. Raman measurements of simple and complex gases were performed using the new system to assess its feasibility for gas analysis. We studied the gas Raman scattering characteristics, the relationship between Raman intensities and pump energies, and the energy threshold for the transition from spontaneous Raman scattering to SRS. H₂, CO₂, and propene (C₃H₆) were used as test gases. Our results demonstrated that a single-beam pulsed pump combined with FERS provides an effective Raman enhancement technique for gas analysis. Furthermore, an energy threshold for SRS initiation was experimentally observed. The SRS-capable FERS system, utilizing a single-beam pulsed pump, shows great potential for analyzing complex gases such as propene, which is a volatile organic compound (VOC) gas, serving as a biomarker in human breath for lung cancer and other human diseases. This work contributes to the advancement of gas analysis and opens alternative avenues for exploring novel Raman enhancement techniques. Full article

Information on the penetration depth, pathways, metabolization, storage of vehicles, active pharmaceutical ingredients (APIs), and functional cosmetic ingredients (FCIs) of topically applied formulations or contaminants (substances) in skin is of great importance for understanding their interaction with skin targets, treatment efficacy, and risk assessment—a challenging task in dermatology, cosmetology, and pharmacy. Non-invasive methods for the qualitative and quantitative visualization of substances in skin in vivo are favored and limited to optical imaging and spectroscopic methods such as fluorescence/reflectance confocal laser scanning microscopy (CLSM); two-photon tomography (2PT) combined with autofluorescence (2PT-AF), fluorescence lifetime imaging (2PT-FLIM), second-harmonic generation (SHG), coherent anti-Stokes Raman scattering (CARS), and reflectance confocal microscopy (2PT-RCM); three-photon tomography (3PT); confocal Raman micro-spectroscopy (CRM); surface-enhanced Raman scattering (SERS) micro-spectroscopy; stimulated Raman scattering (SRS) microscopy; and optical coherence tomography (OCT). This review summarizes the state of the art in the use of the CLSM, 2PT, 3PT, CRM, SERS, SRS, and OCT optical methods to study skin penetration in vivo non-invasively (302 references). The advantages, limitations, possibilities, and prospects of the reviewed optical methods are comprehensively discussed. The ex vivo studies discussed are potentially translatable into in vivo measurements. The requirements for the optical properties of substances to determine their penetration into skin by certain methods are highlighted. Full article

To induce a Raman-active transition in a material, stimulated Raman scattering (SRS) spectroscopy/microscopy implementations typically rely on two pulsed laser sources. One of their limitations is that not all of the regions of Raman spectra can be investigated, so only some applications can be exploited. In this paper, the noise characterizations of a stimulated Raman scattering spectroscopy/microscopy implementation, based on the insertion of a third pulsed laser source, are provided. The merit of this system is that it is able to explore the large variety of SRS applications. In order to characterize our system, an investigation of different kinds of noises due to the laser sources and electronics sources was carried out. Firstly, the relative intensity noises of three femtosecond laser sources were measured. Secondly, noise characterizations of the detection system were carried out and our findings prove that our SRS microscope is shot noise-limited, demonstrating that the third laser source introduction is well suited and satisfies our purpose. Finally, the statistical properties of the overall image noises are analyzed and discussed. Full article

The growing interest in the development of new platforms for the application of Raman spectroscopy techniques in biosensor technologies is driven by the potential of these techniques in identifying chemical compounds, as well as structural and functional features of biomolecules. The effect of Raman scattering is a result of inelastic light scattering processes, which lead to the emission of scattered light with a different frequency associated with molecular vibrations of the identified molecule. Spontaneous Raman scattering is usually weak, resulting in complexities with the separation of weak inelastically scattered light and intense Rayleigh scattering. These limitations have led to the development of various techniques for enhancing Raman scattering, including resonance Raman spectroscopy (RRS) and nonlinear Raman spectroscopy (coherent anti-Stokes Raman spectroscopy and stimulated Raman spectroscopy). Furthermore, the discovery of the phenomenon of enhanced Raman scattering near metallic nanostructures gave impetus to the development of the surface-enhanced Raman spectroscopy (SERS) as well as its combination with resonance Raman spectroscopy and nonlinear Raman spectroscopic techniques. The combination of nonlinear and resonant optical effects with metal substrates or nanoparticles can be used to increase speed, spatial resolution, and signal amplification in Raman spectroscopy, making these techniques promising for the analysis and characterization of biological samples. This review provides the main provisions of the listed Raman techniques and the advantages and limitations present when applied to life sciences research. The recent advances in SERS and SERS-combined techniques are summarized, such as SERRS, SE-CARS, and SE-SRS for bioimaging and the biosensing of molecules, which form the basis for potential future applications of these techniques in biosensor technology. In addition, an overview is given of the main tools for success in the development of biosensors based on Raman spectroscopy techniques, which can be achieved by choosing one or a combination of the following approaches: (i) fabrication of a reproducible SERS substrate, (ii) synthesis of the SERS nanotag, and (iii) implementation of new platforms for on-site testing. Full article

Characterizing the physical and chemical properties of two-dimensional (2D) materials is of great significance for performance analysis and functional device applications. As a powerful characterization method, nonlinear optics (NLO) spectroscopy has been widely used in the characterization of 2D materials. Here, we summarize the research progress of NLO in 2D materials characterization. First, we introduce the principles of NLO and common detection methods. Second, we introduce the recent research progress on the NLO characterization of several important properties of 2D materials, including the number of layers, crystal orientation, crystal phase, defects, chemical specificity, strain, chemical dynamics, and ultrafast dynamics of excitons and phonons, aiming to provide a comprehensive review on laser-based characterization for exploring 2D material properties. Finally, the future development trends, challenges of advanced equipment construction, and issues of signal modulation are discussed. In particular, we also discuss the machine learning and stimulated Raman scattering (SRS) technologies which are expected to provide promising opportunities for 2D material characterization. Full article

The efficacy of pharmaceutical agents can be greatly improved through nanocarrier delivery. Encapsulation of pharmaceutical agents into a nanocarrier can enhance their bioavailability and biocompatibility, whilst also facilitating targeted drug delivery to specific locations within the body. However, detailed understanding of the in vivo activity of the nanocarrier-drug conjugate is required prior to regulatory approval as a safe and effective treatment strategy. A comprehensive understanding of how nanocarriers travel to, and interact with, the intended target is required in order to optimize the dosing strategy, reduce potential off-target effects, and unwanted toxic effects. Raman spectroscopy has received much interest as a mechanism for label-free, non-invasive imaging of nanocarrier modes of action in vivo. Advanced Raman imaging techniques, including coherent anti-Stokes Raman scattering (CARS) and stimulated Raman scattering (SRS), are paving the way for rigorous evaluation of nanocarrier activity at the single-cell level. This review focuses on the development of Raman imaging techniques to study organic nanocarrier delivery in cells and tissues. Full article