Search Results (80)

Electrohydrodynamic atomization (EHDA) has significant advantages for microencapsulating compounds in various structures using biopolymers, where more research using pure starch is required. Concerning this, jicama starch and its hydrolysates have not yet been tested, despite their unique characteristics, which come from an alternative low-value-added crop source. Rapid acid hydrolysis of jicama starch with H₂SO₄ resulted in dextrins with a degree of hydrolysis (DE) from 0.4 to 19% within 1–12 h, and syrup solids at 24 h (DE = 42%). This process modifies the water retention capacity of jicama starch, gel viscosity, surface tension, and electrical conductivity. Hydrolyzed starch particles obtained by electrospraying (10 kV, L = 10 cm, Q = 2 mL/h) showed Feret diameters and roundness significantly influenced (p ≤ 0.05) by the degree of hydrolysis rather than the concentration of solids. It was found that hydrolyzed jicama starch with a DE < 6.3% can be used as the sole wall material to form particles by electrospraying, as they facilitate the formation of stable and rounded like-microspheres particles; this was not feasible above this threshold. The results suggest that the jicama starch’s ability to be used as a wall material in the electrospray synthesis of particles or microspheres appears to be determined by the degree of hydrolysis. Full article

Oat starch plays a crucial role in the stability of oat milk. Enzyme-hydrolyzed oat starch has been demonstrated to be an effective means of improving the stability of oat milk. The effects of different enzyme combinations on the stability of oat milk and the properties of starch in oats were investigated by adding α-amylase, amyloglucosidase, and different ratios of pullulanase and isoamylase. The results showed that as the degree of hydrolysis increased, the molecular weight, amylose content, and side chain length distribution of the starch decreased significantly. Moreover, compared with oat starch, the rheological and emulsifying properties of the starch hydrolysates were improved, and the characterization of emulsion stability showed that a 1:2 ratio of pullulanase to isoamylase promoted effective debranching and thus improved the stability of oat milk. This study demonstrated that debranching enzymes enhance the enzymatic hydrolysis of beverages and improve the physicochemical properties and stability of oat milk. Full article

Agarase and its metabolites are reported to have applications in a variety of fields, but there have been few studies of the effects of agaro-oligosaccharide hydrolysate on muscle function. In this study, we analyzed the functionality of agarase and its metabolites in bacteria isolated from seawater. A bacterium with agar-degrading activity was isolated from Shimabara, Nagasaki, Japan. Through 16S rRNA sequence alignment, it was identified as being closely related to Rheinheimera sp. WMF-1 and was provisionally named Rheinheimera sp. (HY). Crude enzymes derived from this bacterium demonstrated an ability to hydrolyze various polysaccharides, including agar, agarose, and starch, with the highest specificity observed for agarose. The optimum pH and temperature were pH 10 and 50 °C. A glycoside bond specificity analysis of enzymatic activity indicated the cleavage of the α-linkage. Next, we investigated the functional effects of agaro-oligosaccharides on C2C12 myotubes. Treatment with 10–30 kDa oligosaccharides significantly increased the hypertrophy rate, diameter, and expression of myosin heavy-chain genes in C2C12 myotubes. These results indicate that the agaro-oligosaccharides produced by the enzymes identified in this study improve muscle mass, suggesting their potential contribution to muscle function. Full article

The manuscript presents research focusing on the adsorption and emulsion properties of starch hydrolysates modified through acetylation, oxidation, and cross-linking. The techniques used in this study included measurements of equilibrium surface tension (du Noüy ring) dynamic surface tension (drop shape analysis), and the preparation and evaluation of emulsion stability (TURBISCAN). The surface activity of the acetylated starch hydrolysates is affected by the degree of acetylation. The acetylated starch 0.02Ac-H exhibited higher surface activity than the more highly substituted derivative 0.1Ac-H. Furthermore, it was shown that the surface activity of the components increased as the acetylated oxidized starch underwent hydrolysis. The fractions collected after 180 min using a membrane with a low separation capability (8 kDa) revealed the highest capacity for reducing surface tension. In binary systems consisting of starch derivatives and surfactants, synergistic effects in reducing surface tension were particularly noticeable in systems containing ionic surfactants. The addition of a cationic surfactant to the modified starch hydrolysate solution (1:6 mol/mol) resulted in a significantly more efficient saturation of the air/water interface. This study demonstrated that emulsions stabilized with modified starch hydrolysates remained stable over time, even when these hydrolysates constituted up to 60% of the emulsifier mixture. Full article

Defatted rice bran (DRB) is the by-product of rice bran oil extraction and presents approximately 66% carbohydrates and 15% proteins, a composition with the potential to integrate biorefinery systems. This study aimed to investigate the feasibility of residual fractions from ultrasound-assisted protein extraction from DRB as sources of carbohydrates in bioprocesses. First, DRB was exposed to protein extraction in an alkaline medium assisted by ultrasound. The residual fractions, including the precipitate from the extraction process (P1) and the supernatant from protein precipitation (S2), were combined and autoclaved to gelatinize the starch. Enzyme activity tests showed that a temperature of 70 °C was optimal for the simultaneous application of α-amylase and amyloglucosidase (AMG). To study enzymatic hydrolysis, a Full Factorial Design (FFD) 2² was employed, with α-amylase and AMG concentrations ranging from 0.12 to 0.18 mL∙L⁻¹ and a substrate concentration (P1/S2 ratio) between 30 and 70 g∙L⁻¹, resulting in a maximum of 18 g∙L⁻¹ of reducing sugars (RS). Fermentation assays with Saccharomyces cerevisiae demonstrated that the hydrolysate of the residual fractions was effective for ethanol production (8.84 g∙L⁻¹ of ethanol; Y_P/S: 0.614 g_ethanol∙g_RS⁻¹; η: 120.24%), achieving results comparable to control media (with sucrose as the substrate), indicating its potential for application in bioprocesses. These outcomes highlight a promising technological approach for utilizing DRB in integrated biorefineries. Full article

The byproduct from wheat starch production contains approximately 70% gluten (WG) and is an inexpensive but demanding protein raw material for the food industry. This study attempted to determine the optimal hydrolysis conditions for such raw material to obtain peptides combining beneficial functional characteristics with health-promoting activity. The proteases Bromelain, Alcalase, Flavourzyme, and a protease from A. saitoi were used for hydrolysis. It was shown that the tested proteases differ both in terms of the effective hydrolysis conditions of gluten and the profile of the released hydrolysates. Bromelain was particularly effective in converting gluten into peptides, combining beneficial health and functional properties. It achieved maximum activity (189 U/g) against WG at pH 6 and 60 °C, and the best-balanced peptides in terms of desired properties were released at a dose of 2.5 U/g. These peptides were free from most allergenic epitopes, effectively inhibited ACE, and, at 0.34 g, were equivalent to the approved dose of BHT. Their emulsifying activity was higher than that of gluten, and the foaming formation and stabilization potential exceeded that of ovalbumin by 10% and 19%, respectively. It seems that Bromelain-released WG hydrolysates are a promising candidate for a safe fat stabilizer and egg white substitute. Full article

This paper introduces an enzymatic approach to estimate internal mass-transfer resistances during food digestion studies. Cellulase has been used to degrade starch cell walls (where cellulose is a significant component) and reduce the internal mass-transfer resistance, so that the starch granules are released and hydrolysed by amylase, increasing the starch hydrolysis rates, as a technique for measuring the internal mass-transfer resistance of cell walls. The estimated internal mass-transfer resistances for granular starch hydrolysis in a beaker and stirrer system for simulating the food digestion range from 2.2 × 10⁷ m⁻¹ s at a stirrer speed of 100 rpm to 6.6 × 10⁷ m⁻¹ s at 200 rpm. The reaction rate constants for cellulase-treated starch are about three to eight times as great as those for starch powder. The beaker and stirrer system provides an in vitro model to quantitatively understand external mass-transfer resistance and compare mass-transfer and reaction rate kinetics in starch hydrolysis during food digestion. Particle size analysis indicates that starch cell wall degradation reduces starch granule adhesion (compared with soaked starch samples), though the primary particle sizes are similar, and increases the interfacial surface area, reducing internal mass-transfer resistance and overall mass-transfer resistance. Dimensional analysis (such as the Damköhler numbers, Da, 0.3–0.5) from this in vitro system shows that mass-transfer rates are greater than reaction rates. At the same time, SEM (scanning electron microscopy) images of starch particles indicate significant morphology changes due to the cell wall degradation. Full article

Around 70 million metric tonnes of fruit and vegetable waste (FVW) are produced each year and are eventually discarded as wholesale garbage. Microorganisms decompose this FVW, which has led to environmental contamination, greenhouse gas emissions, and other impacts related to climate change. If FVW are used properly, they can reduce environmental damage and also boost a nation’s economy. FVW contain vast amounts of biopolymers, viz., pectin, cellulose, and starch, all of which are hydrolysed by microbes with the aid of the pectinase, cellulase, and amylase enzymes, respectively. Therefore, in light of this, the intervention of microorganisms for the production of pectinase, cellulase, and amylase could be a safe, cost-effective, and eco-friendly approach for the precise utilisation of FVW. Nowadays, thermophilic multienzymes are extracted from a group of hot spring microbes. Thermophilic multienzymes are more capable of surviving at high temperatures and have less degrading capability. Moreover, through this advancement, we can obtain vast amounts of pectinase, cellulase, and amylase enzymes within a short period of time. This microbial enzyme preparation might be helpful in food, textiles, paper, pulp, animal feed supplements, detergents, juice/pulp clarity, leather, and other related sectors. Full article

The food industry extensively uses chemically modified starches and their hydrolysates, which is mainly due to their emulsification ability. Therefore, it becomes inevitable to develop new starch derivatives, including modified starch hydrolysates, and effective preparation methods to meet the increasing demands of producers, consumers, and technology. This study comprehensively researches the physical, chemical, and functional properties (such as the water-binding capacity, swelling power, solubility, and fat absorption capacity) of chemically modified biopolymers and their enzymatic hydrolysis products. We utilized oxidized and acetylated potato and waxy-corn starches with varying degrees of substitution by carboxyl and acetyl groups in our research. The process of enzymatic hydrolysis was performed in a recirculated membrane reactor (CRMR). Our findings indicated that the physicochemical properties of starch derivatives and their hydrolysates depended on the biological origin of the biopolymer and the type and degree of modification. However, the presence of carboxyl groups in the modified starch molecules is critical and affects the rheological properties and water-binding capacity of the starch preparations. For example, in the case of waxy-corn starch preparations with a lower content of carboxyl groups (i.e., derivatives with a low degree of oxidation), the water-binding capacity (WBC) increases when compared to native starch. The highest WBC value of 206.3% was noted for the doubly modified waxy-corn starch with an oxidation degree of 0.2% and an acetylation degree of 2.5%, while native waxy-corn starch shows a WBC of 161.4%. In contrast, it was observed that preparations with a higher content of carboxyl groups, i.e., derivatives with an oxidation degree of 2.5%, show a lower swelling power compared to native waxy starch. Full article

Biomass from various types of organic waste was tested for possible use in hydrogen production. The composition consisted of lignified samples, green waste, and kitchen scraps such as fruit and vegetable peels and leftover food. For this purpose, the enzymatic pretreatment of organic waste with a combination of five different hydrolytic enzymes (cellulase, amylase, glucoamylase, pectinase and xylase) was investigated to determine its ability to produce hydrogen (H₂) with the hydrolyzate produced here. In course, the anaerobic rod-shaped bacterium T. neapolitana was used for H₂ production. First, the enzymes were investigated using different substrates in preliminary experiments. Subsequently, hydrolyses were carried out using different types of organic waste. In the hydrolysis carried out here for 48 h, an increase in glucose concentration of 481% was measured for waste loads containing starch, corresponding to a glucose concentration at the end of hydrolysis of 7.5 g·L⁻¹. In the subsequent set fermentation in serum bottles, a H₂ yield of 1.26 mmol H₂ was obtained in the overhead space when Terrific Broth Medium with glucose and yeast extract (TBGY medium) was used. When hydrolyzed organic waste was used, even a H₂ yield of 1.37 mmol could be achieved in the overhead space. In addition, a dedicated reactor system for the anaerobic fermentation of T. neapolitana to produce H₂ was developed. The bioreactor developed here can ferment anaerobically with a very low loss of produced gas. Here, after 24 h, a hydrogen concentration of 83% could be measured in the overhead space. Full article

UV radiation was combined with the incorporation of fish protein hydrolysates to improve the performance of active bio-based films for food packaging. UV radiation was not used previously to enhance the packaging performance of blend films of starch/protein, and fish protein hydrolysates were not incorporated in bio-based polymer surfaces previously. Rice starch and fish proteins (from Whitemouth croaker muscle) were utilized to prepare films by the casting technique, which were UV-radiated under different exposure times (1, 5, and 10 min). The packaging performance of the films was determined according to the mechanical and barrier performance, solubility, and color. Fish protein hydrolysates (from Argentine croaker muscle) were then incorporated into the films (bulk structure or surface). The results showed that UV radiation for 1 min increased the tensile strength and modified the optical properties of films. It also altered the structure of the polymeric matrix, as demonstrated by the microstructure and thermal analysis, in agreement with the data obtained in packaging properties. The evaluation of antioxidant capacity through 2,2-azino-bis-3-ethylbenzthiazoline-6-sulphonic acid (ABTS) and reducing power indicated that incorporating fish protein hydrolysates either in the films’ bulk structure or film surface promoted antioxidant properties; control films (produced with rice starch/fish proteins without hydrolysates) also presented antioxidant potential. According to the peroxide value and thiobarbituric acid reactive substance (TBARS) assays, control films and the films containing hydrolysates in their bulk structure or on the surface could prevent the lipid oxidation of Italian salami. Thus, combining UV radiation to shape the characteristics of bio-based materials with fish protein hydrolysates to reduce lipid oxidation contributes to the performance of active bio-based films for food packaging. Full article

The influence of protease-assisted hydrolysis on the impact exerted by the soy protein isolate on the thermo-mechanical behavior and baking performance of the gluten-free composite flour, consisting of a mixture of rice and quinoa flours, was investigated. The mPAGE analysis revealed that soluble fractions of the hydrolysates, obtained with bromelain, Neutrase or trypsin, concentrated the peptides with a molecular weight lower than 20 kDa, whereas the insoluble ones retained higher molecular weight fragments. The influence of the separate and cumulative addition of the soluble and insoluble soy peptide fractions on the thermo-mechanical properties of dough was tested by means of a Mixolab device. Regardless of the enzyme used for hydrolysis, the addition of the soluble peptide fraction to the gluten-free composite flour resulted in delayed starch gelatinization, whereas the insoluble one caused a considerable increase in the dough consistency. The most important improvements in the dough behavior were observed when supplementing the gluten-free flour with 10% soy protein hydrolysates obtained with bromelain and trypsin. The gluten-free muffins enriched in soy protein hydrolysate exhibited important differences in terms of moisture, height and specific volume, compared to the control. Moreover, the ABTS- and DPPH-based methods indicated that protein hydrolysate addition caused a significant improvement in the antioxidant activity (by at least 38% and 23%, respectively) compared to the control. In conclusion, soy protein hydrolysate might be successfully used for increasing both the protein content and the antioxidant activity of the muffin samples. Full article

Metal-catalyzed lipid oxidation is a major factor in food waste, as it reduces shelf life. Addressing this issue, our study investigates the potential of hydrolysates derived from potato protein, a by-product of potato starch production, as metal-chelating antioxidants. Through sequential enzymatic hydrolysis using alcalase or trypsin combined with Flavourzyme, we produced various hydrolysates, which were then fractionated using ultrafiltration. Using a combination of peptidomics and bioinformatics, we predicted the presence of metal-chelating and free radical-scavenging peptides across all hydrolysate fractions, with a trend indicating a higher content of antioxidant peptides in lower molecular weight fractions. To validate these predictions, we utilized surface plasmon resonance (SPR) and a 9-day emulsion storage experiment. While SPR demonstrated potential in identifying antioxidant activity, it faced challenges in differentiating between hydrolysate fractions due to significant standard errors. In the storage experiment, all hydrolysates showed lipid oxidation inhibition, though not as effectively as ethylenediaminetetraacetic acid (EDTA). Remarkably, one fraction (AF13) was not significantly different (p < 0.05) from EDTA in suppressing hexanal formation. These results highlight SPR and peptidomics/bioinformatics as promising yet limited methods for antioxidant screening. Importantly, this study reveals the potential of potato protein hydrolysates as antioxidants in food products, warranting further research. Full article

Vitamin A is an essential micronutrient that is readily oxidized. In this study, the encapsulation of vitamin A palmitate (AP) within a core–shell carbohydrate matrix by co-axial electrospray and its oxidative stability was evaluated. The electrosprayed core–shell microcapsules consisted of a shell of octenyl succinic anhydride (OSA) modified corn starch, maltose (Hi-Cap), and a core of ethyl cellulose–AP (average diameter of about 3.7 µm). The effect of different compounds (digestion-resistant maltodextrin, soy protein hydrolysate, casein protein hydrolysate, and lecithin) added to the base core–shell matrix formulation on the oxidative stability of AP was investigated. The oxidative stability of AP was evaluated using isothermal and non-isothermal differential scanning calorimetry (DSC), and Raman and Attenuated Total Reflectance–Fourier Transform Infrared (ATR-FTIR) spectroscopy methods. The core–shell carbohydrate matrix minimizes the amount of AP present at the microparticle surface, thus protecting AP from oxidation. Furthermore, the most effective oxidation protection was achieved when casein protein hydrolysate was added to the core of the microcapsule due to hydrophobic and hydrogen bond interactions with AP and by the resistant maltodextrin in the shell, which acted as a filler. The utilization of ethanol as a solvent for the dispersion of the core compounds increased the hydrophobicity of the hydrolyzed proteins and contributed to the enhancement of their antioxidant ability. Both the carbohydrate core–shell microcapsule prepared by co-axial electrospray and the addition of oxidation protection compounds enhance the oxidative stability of the encapsulated AP. Full article

Plant-based desserts are becoming increasingly popular with and appreciated by consumers. However, they are limited by the choice of ingredients, which are often expensive and unstable with a random texture. Therefore, the aim of the research is to propose a new product that offers an advantageous texture and flavour in a fermented dessert based on a flour mix supplemented with an enzymatic hydrolysate. This study involved the development of two processes: (i) an enzymatic hydrolysis of oat flour and (ii) a fermentation of a flour mixture (oat, chickpea, and coconut) by lactic acid bacteria (Lactobacillus delbrueckii subsp. bulgaricus and Streptococcus thermophilus). The result of the oat flour hydrolysate shows a significant decrease in starch after 60 min of reaction, followed by an increase in sugar content. During 23 days of storage at 4 °C, the formulations used showed post-acidification, water retention capacity decrease, and hardness increase related to the hydrolysate rate (p < 0.05). All formulations allowed the viability of lactic bacteria (over 5 log₁₀ CFU/mL) and verified their ability to produce exopolysaccharides (0.23–0.73 g/100 g). The prototyping of such a product represents a key step in meeting the growing demand for plant-based alternatives, with qualitative sensory characteristics without additives. Full article