Search Results (20)

Cilostazol (CIL), a BCS class II antiplatelet aggregation and vasodilator agent, is used for cerebrovascular diseases to minimize blood–brain barrier dysfunction, white matter-lesion formation, and motor deficits. The current work aimed to develop and optimize cilostazol-loaded spanlastics (CIL-SPA) for nose-to-brain delivery to overcome the low solubility and absorption, the first pass-metabolism, and the adverse effects. The optimal CIL-SPA formulation was loaded into Phytagel^® (SPA-PG), Poloxamer-407 (SPA-P407), and chitosan (SPA-CS) gel bases and characterized in terms of colloidal properties, encapsulation efficiency (EE%), mucoadhesive properties, and biopharmaceutical aspects. The developed in situ gelling formulations showed a <300 nm average hydrodynamic diameter, <0.5 polydispersity index, and >|±30| mV zeta potential with a high EE% (>99%). All formulations met the droplet size-distribution criteria of nasal requirements (<200 µm), and all formulations showed adequate mucoadhesion properties. Both the BBB-PAMPA and horizontal permeability study through an artificial membrane revealed that all formulations had higher CIL flux and cumulative permeability at in vitro nose-to-brain conditions compared to the initial CIL. The in vitro drug-release study showed that all formulations released ca. 100% of CIL after 2 h. Therefore, the developed formulations could be promising for improving the low bioavailability of CIL through nose-to-brain delivery. Full article

Background/Objectives: The demand for a safe compound for hyperpigmentation is continuously increasing. Bioactive compounds such as thymoquinone (TQ) and ascorbic acid (AA) induce inhibition of melanogenesis with a high safety profile. The aim of this study was to design and evaluate spanlastics gel loaded with bioactive agents, TQ and AA, for the management of hyperpigmentation. Methods: Several spanlastics formulations were successfully fabricated and characterized in terms of morphology, vesicle size, zeta potential, and release. Results: The optimized TQ-loaded spanlastic formulation showed an average size of 223.40 ± 3.50 nm, and 133.00 ± 2.80 nm for AA-loaded spanlastic formulation. The optimized spanlastics formulation showed the highest entrapment efficiency (EE%) of 97.18 ± 2.02% and 93.08 ± 1.95%, for TQ and AA, respectively. Additionally, the edge activator concentration had a significant effect (p < 0.05) on EE%; it was found that by increasing the amount of EA, the EE% increases. Following that, the optimal spanlastics fomulation loaded with TQ and AA were incorporated into gel and explored for appearance, pH, spreadability, stability, rheology, in vitro release, ex vivo permeation study, and MTT cytotoxicity. The formulated spanlastics gel (R-1) has a pH of 5.53. Additionally, R-1 gel was significantly (p < 0.05) more spreadable than control gel, and exhibited a shear thinning behavior. Most importantly, ex vivo skin deposition studies confirmed superior skin deposition of TQ and AA from spanlastic gels. Additionally, results indicated that tyrosinase inhibition was primarily due to TQ. When comparing TQ alone with the TQ-AA combination, inhibition ranged from 18.35 to 42.73% and 24.28 to 42.53%, respectively. Both TQ spanlastics and the TQ-AA combination showed a concentration-dependent inhibition of tyrosinase. Conclusions: Spanlastic gel might represent a promising carrier for the dermal delivery of TQ and AA for the management of hyperpigmentation conditions. Full article

Background/Objectives: Drugs exhibiting poor aqueous solubility present a challenge to efficient delivery to the site of action. Spanlastics (a nano, surfactant-based drug delivery system) have emerged as a powerful tool to improve solubility, bioavailability, and delivery to the site of action. This study aimed to better understand factors affecting the physicochemical properties of spanlastics, quantify their effects, and use them to enhance the bioavailability of famotidine (FMT), a model histamine H2 receptor antagonist (BCS class IV). Methods: FMT was incorporated into nano-spanlastics drug delivery system. The ethanol injection method, Box–Behnken design, and mathematical modeling were utilized to fabricate famotidine-loaded nano-spanlastics and optimize the formula. Spanlastics were characterized for their particle size, polydispersity index, zeta potential, entrapment efficiency, drug loading, compatibility of the excipients (using DSC), in vitro drug release, and in vivo pharmacokinetics. Results: Span 60 (the non-ionic surfactant) and tween 60 (the edge activator) gave rise to spanlastics with the best characteristics. The optimal spanlastic formulation exhibited small particle size (<200 nm), appropriate polydispersity index (<0.4), and zeta potential (>−30 mV). The entrapment efficiency and drug loading of the optimum formula assured its suitability for hydrophobic drug entrapment as well as practicability for use. DSC assured the compatibility of all formulation components. The drug release manifested a biphasic release pattern, resulting in a fast onset and sustained effect. Spanlastics also showed enhanced C_max, AUC_0–24, and bioavailability. Conclusions: Spanlastics manifested improved FMT dissolution, drug release characteristics, membrane permeation, and pharmacokinetic behavior. Full article

Ocular drug delivery poses unique challenges due to the complex anatomical and physiological barriers of the eye. Conventional dosage forms often fail to achieve optimal therapeutic outcomes due to poor bioavailability, short retention time, and off-target effects. In recent years, vesicular drug delivery systems have emerged as promising solutions to address these challenges. Vesicular systems, such as liposome, niosome, ethosome, transfersome, and others (bilosome, transethosome, cubosome, proniosome, chitosome, terpesome, phytosome, discome, and spanlastics), offer several advantages for ocular drug delivery. These include improved drug bioavailability, prolonged retention time on the ocular surface, reduced systemic side effects, and protection of drugs from enzymatic degradation and dilution by tears. Moreover, vesicular formulations can be engineered for targeted delivery to specific ocular tissues or cells, enhancing therapeutic efficacy while minimizing off-target effects. They also enable the encapsulation of a wide range of drug molecules, including hydrophilic, hydrophobic, and macromolecular drugs, and the possibility of combination therapy by facilitating the co-delivery of multiple drugs. This review examines vesicular drug delivery systems, their advantages over conventional drug delivery systems, production techniques, and their applications in management of ocular diseases. Full article

The objective of the current study was to fabricate a thermosensitive in situ gelling system for the ocular delivery of carvedilol-loaded spanlastics (CRV-SPLs). In situ gel formulations were prepared using poloxamer analogs by a cold method and was further laden with carvedilol-loaded spanlastics to boost the precorneal retention of the drug. The gelation capacity, rheological characteristics, muco-adhesion force and in vitro release of various in situ gel formulations (CS-ISGs) were studied. The optimized formula (F2) obtained at 22% w/v poloxamer 407 and 5% w/v poloxamer 188 was found to have good gelation capacity at body temperature with acceptable muco-adhesion properties, appropriate viscosity at 25 °C that would ease its ocular application, and relatively higher viscosity at 37 °C that promoted prolonged ocular residence of the formulation post eye instillation and displayed a sustained in vitro drug release pattern. Ex vivo transcorneal penetration studies through excised rabbit cornea revealed that F2 elicited a remarkable (p ˂ 0.05) improvement in CRV apparent permeation coefficient (P_app = 6.39 × 10⁻⁶ cm/s) compared to plain carvedilol-loaded in situ gel (CRV-ISG; P_app = 2.67 × 10⁻⁶ cm/s). Most importantly, in normal rabbits, the optimized formula (F2) resulted in a sustained intraocular pressure reduction and a significant enhancement in the ocular bioavailability of carvedilol, as manifested by a 2-fold increase in the AUC_0–6h of CRV in the aqueous humor, compared to plain CRV-ISG formulation. To sum up, the developed thermosensitive in situ gelling system might represent a plausible carrier for ophthalmic drug delivery for better management of glaucoma. Full article

Orally administered antipsychotic drugs are the first-line treatment for psychotic disorders, such as schizophrenia and bipolar disorder. Nevertheless, adverse drug reactions jeopardize clinical outcomes, resulting in patient non-compliance. The design formulation strategies for enhancing brain drug delivery has been a major challenge, mainly due to the restrictive properties of the blood–brain barrier. However, recent pharmacokinetic and pharmacodynamic in vivo assays confirmed the advantage of the intranasal route when compared to oral and intravenous administration, as it allows direct nose-to-brain drug transport via neuronal pathways, reducing systemic side effects and maximizing therapeutic outcomes. In addition, the incorporation of antipsychotic drugs into nanosystems such as polymeric nanoparticles, polymeric mixed micelles, solid lipid nanoparticles, nanostructured lipid carriers, nanoemulsions, nanoemulgels, nanosuspensions, niosomes and spanlastics, has proven to be quite promising. The developed nanosystems, having a small and homogeneous particle size (ideal for nose-to-brain delivery), high encapsulation efficiency and good stability, resulted in improved brain bioavailability and therapeutic-like effects in animal models. Hence, although it is essential to continue research in this field, the intranasal delivery of nanosystems for the treatment of schizophrenia, bipolar disorder and other related disorders has proven to be quite promising, opening a path for future therapies with higher efficacy. Full article

The present study delineates the preparation of piperine-loaded spanlastics (PIP-SPL) to improve piperine (PIP) solubility, bioavailability, and permeation through nasal mucosa for intranasal delivery. PIP-SPL was formulated using the thin-film hydration method and optimization was performed using Box–Behnken design (BBD). PIP-SPL optimized formulation (PIP-SPLopt) was characterized for polydispersity index (PDI), vesicle size, entrapment efficiency, zeta potential, and in vitro PIP release. For further evaluation, blood–brain distribution study, transmission electron microscopy (TEM), nasal permeation study, and confocal scanning laser microscopy (CLSM) were performed withal. The PIP-SPLopt presented spherical and sealed shape vesicles with a small vesicle size of 152.4 nm, entrapment efficiency of 72.93%, PDI of 0.1118, and in vitro release of 82.32%. The CLSM study unveiled that the developed formulation has greater permeation of PIP across the nasal mucosa in comparison with the PIP suspension. The blood–brain distribution study demonstrated higher C_max and AUC_0–24h of PIP-SPL via the intranasal route in comparison to PIP-SPL via oral administration. The in vivo study revealed that the PIP-SPL has good antiepileptic potential in comparison with the standard diazepam, which was evinced by seizure activity, neuromuscular coordination by rotarod test, biochemical estimation of oxidative stress markers, and histopathological studies. Furthermore, nasal toxicity study confirm that the developed PIP-SPL formulation is safer for intranasal application. The current investigation corroborated that the prepared spanlastic vesicle formulation is a treasured carrier for the PIP intranasal delivery for the management of epilepsy. Full article

Orally administered antipsychotic drugs are the first line of treatment in the management of psychotic disorders that affect millions of people globally and have a tremendous impact on patient and family lives, such as schizophrenia and bipolar disorder. Nevertheless, adverse drug reactions hinder clinical outcomes, resulting in patient non-compliance. The design and implementation of adequate formulation strategies for enhancing drug delivery and targeting to the brain has been a significant challenge, mainly due to the restrictive properties of the blood–brain barrier. However, recent pharmacokinetic and pharmacodynamic in vivo assays confirmed that there is evidence of the advantage of the intranasal route when compared to oral and intravenous administration, as it allows the possibility of direct nose-to-brain transport via neuronal olfactory and trigeminal pathways, reducing systemic side effects, and maximizing therapeutic outcomes. In addition, the formulation of polymeric and solid lipid nanoparticles, nanostructured lipid carriers, nanoemulsions, nanoemulgels, nanosuspensions, niosomes, Spanlastics and polymeric mixed micelles is a promising approach since they have a reduced particle size, ideal for nose-to-brain delivery, stability, high encapsulation efficiency, enhanced drug solubility, and drug protection from enzymatic degradation. Nevertheless, it is essential to continue research in this field, conducting more long-term studies with greater uniformity so that the true potential of these formulations can be assessed and a transposition into the pharmaceutical industry is someday possible. Full article

Flibanserin was licensed by the United States Food and Drug Administration (FDA) as an oral non-hormonal therapy for pre-menopausal women with inhibited sexual desire disorder. However, it suffers from susceptibility to first-pass metabolism in the liver, low aqueous solubility, and degradation in the acidic stomach environment. Such hurdles result in a limited oral bioavailability of 33%. Thus, the aim of the study was to utilize the principles of nanotechnology and the benefits of an intranasal route of administration to develop a formulation that could bypass these drawbacks. A response-surface randomized D-optimal strategy was used for the formulation of flibanserin spanlastics (SPLs) with reduced size and increased absolute zeta potential. Two numerical factors were studied, namely the Span 60: edge activator ratio (w/w) and sonication time (min), in addition to one categorical factor that deals with the type of edge activator. Particle size (nm) and zeta potential (mV) were studied as responses. A mathematical optimization method was implemented for predicting the optimized levels of the variables. The optimized formulation was prepared using a Span: sodium deoxycholate ratio of 8:2 w/w; a sonication time of 5 min showed particle sizes of 129.70 nm and a zeta potential of −33.17 mV. Further in vivo assessment following intranasal administration in rats showed boosted plasma and brain levels, with 2.11- and 2.23-fold increases (respectively) compared to raw FLB. The aforementioned results imply that the proposed spanlastics could be regarded as efficient drug carriers for the trans-nasal delivery of drugs to the brain. Full article

Tolnaftate (TOL) is a thiocarbamate fungicidal drug used topically in the form of creams and ointments. No ocular formulations of TOL are available for fungal keratitis (FK) treatment due to its poor water solubility and unique ocular barriers. Therefore, this study aimed at developing novel modified spanlastics by modulating spanlastics composition using different glycols for enhancing TOL ocular delivery. To achieve this goal, TOL basic spanlastics were prepared by ethanol injection method using a full 3² factorial design. By applying the desirability function, the optimal formula (BS6) was selected and used as a nucleus for preparing and optimizing TOL-cosolvent spanlastics according to the full 3¹.2¹ factorial design. The optimal formula (MS6) was prepared using 30% propylene glycol and showed entrapment efficiency percent (EE%) of 66.10 ± 0.57%, particle size (PS) of 231.20 ± 0.141 nm, and zeta potential (ZP) of −32.15 ± 0.07 mV. MS6 was compared to BS6 and both nanovesicles significantly increased the corneal permeation potential of TOL than drug suspension. Additionally, in vivo histopathological experiment was accomplished and confirmed the tolerability of MS6 for ocular use. The fungal susceptibility testing using Aspergillus niger confirmed that MS6 displayed more durable growth inhibition than drug suspension. Therefore, MS6 can be a promising option for enhanced TOL ocular delivery. Full article

Breast cancer is the most widespread cancer in women with rising incidence, prevalence, and mortality in developed regions. Most breast cancers (80%) are estrogen receptor–positive, indicating that disease progression could be controlled by estrogen inhibition in the breast tissue. However, drug resistance limits the benefits of this approach. Combinatorial treatment could overcome the resistance and improve the outcome of breast cancer treatment. In the current study, we prepared letrozole-(LTZSPs) and quercetin-loaded spanlastics (QuSPs) using different edge activators—Tween 80, Brij 35, and Cremophor RH40—with different concentrations. The spanlastics were evaluated for their average particles size, surface charge, and percent encapsulation efficiency. The optimized formulations were further examined using transmission electron microscopy, Fourier transform infrared spectroscopy, in vitro drug release and ex vivo skin permeation studies. The prepared spherical LTZSPs and QuSPs had average particle sizes ranged between 129–310 nm and 240–560 nm, respectively, with negative surface charge and high LTZ and Qu encapsulation (94.3–97.2% and 97.9–99.6%, respectively). The in vitro release study of LTZ and Qu from the selected formulations showed a sustained drug release for 24 h with reasonable flux and permeation through the rat skin. Further, we evaluated the in vitro cytotoxicity, cell cycle analysis, and intracellular reactive oxygen species (ROS) of the combination therapy of letrozole and quercetin either in soluble form or loaded in spanlastics against MCF-7 breast cancer cells. The LTZSPs and QuSPs combination was superior to the individual treatments and the soluble free drugs in terms of in vitro cytotoxicity, cell cycle analysis, and ROS studies. These results confirm the potential of LTZSPs and QuSPs combination for transdermal delivery of drugs for enhanced breast cancer management. Full article

As regulatory and technical landscapes for pharmaceutical formulation development are rapidly evolving, a risk-management approach using multivariate analysis is highly essential for designing a product with requisite critical quality attributes (CQA). Efinaconazole, a newly approved poorly water-soluble antifungal triazole drug has poor permeability. Spanlastics, new-generation surfactant nanovesicles, being fluidic, help improve the permeability of drugs. Therefore, we optimized efinaconazole spanlastics using the concepts of Formulation-by-Design (FbD) and explored the feasibility of transungual delivery for the management of onychomycosis. Using the Ishikawa fishbone diagram, the risk factors that may have an impact on the CQA of efinaconazole spanlastic vesicles were identified. Application of the Plackett–Burman experimental design facilitated the screening of eight different formulation and process parameters influencing particle size, transmittance, relative deformability, zeta potential, entrapment efficiency, and dissolution efficiency. With the help of Pareto charts, the three most significant factors were identified, viz., vesicle builder (Span), edge activator (Tween), and mixing time. The levels of these three critical variables were optimized by FbD to reduce the particle size and maximize the transparency, relative deformability, encapsulation efficiency, and dissolution efficiency of efinaconazole spanlastic nanovesicles. Bayesian and Lenth’s analysis and mathematical modeling of the experimental data helped to quantify the critical formulation attributes required for getting the formulation with optimum quality features. The optimized efinaconazole-loaded spanlastic vesicles had a particle size of 197 nm, transparency of 91%, relative deformability of 12.5 min, and dissolution efficiency of 81.23%. The spanlastic formulation was incorporated into a gel and explored ex vivo for transungual delivery. This explorative study provides an example of the application of principles of risk management, statistical multivariate analysis, and the FbD approach in developing efinaconazole spanlastic nanovesicles. Full article

Simvastatin (SMV) is an antihyperlipidemic agent that has been investigated as a possible anti-cancer agent. An obstacle to malignant tumor therapy using drugs is the delivery of adequate levels to the cancer cells while minimizing side effects following their systemic administration. To circumvent this challenge, the researchers directed towards the field of nanotechnology to benefit from the nano-size of the formulation in passively targeting the tumor cells. Thus, our study aimed at investigating the potential of a combined mixture–process variable design for optimization of SMV spanlastics (SMV-SPNs) with minimized particle size and maximized zeta potential to enhance the anticancer activity of the drug. The study investigated the effects of Span^® 20 and Tween^® 80 as mixture components and sonication time as a process variable on particle size, polydispersity index, and zeta potential as responses. SPNs were prepared using an ethanol injection method. Combining the predicted optimized variables’ levels is supposed to achieve the set goals with a desirability of 0.821. The optimized spanlastics exhibited a measured globule size of 128.50 nm, PDI of 0.329, and ZP of −29.11 mV. The percentage relative error between predicted responses and the observed ones were less than 5% for the three responses, indicating the optimization technique credibility. A significant improvement in the cytotoxicity of the optimized formulation against three different cancerous cell lines was observed in comparison with SMV. The inhibitory concentration (IC₅₀) values of MCF-7, HCT-116, and HEPG2 were found to be 0.89, 0.39, and 0.06 μM at 24 h incubation. The enhanced cytotoxicity could be assigned to the possible improved permeation and preferential build-up within the cancerous cells by virtue of the minimized size. These findings imply that SMV-SPNs could be an ideal strategy to combat cancer. Full article

Our goal was to prepare Span 60-based elastic nanovesicles (spanlastics (SPLs)) of tacrolimus (TCR) using the adapted ethanol injection method, characterize them, and evaluate their ability to improve the transdermal permeation of the active substance. The impact of two different concentrations of penetration enhancers, namely, propylene glycol and oleic acid, on the entrapment efficiency, vesicle size, and zeta potential was assessed. Moreover, in vitro release through a semipermeable membrane and ex vivo penetration through hairless rat skin were performed. Morphological examination and pharmacokinetics were performed for one selected formulation (F3OA1). TCR-loaded SPLs were effectively formulated with two different concentrations of permeation enhancers, and the effect of these enhancers on their physicochemical properties differed in accordance with the concentration and kind of enhancer used. The results of in vitro release displayed a considerable (p < 0.05) enhancement compared to the suspension of the pure drug, and there was a correlation between the in vitro and ex vivo results. The selected TCR-loaded nanovesicles incorporated into a gel base showed appreciable advantages over the oral drug suspension and the TCR-loaded gel. Additionally, the pharmacokinetic parameters were significantly (p < 0.05) improved based on our findings. Moreover, the AUC_0–7 ng·h/mL form F3 OA1 was 3.36-fold higher than that after the administration of the TCR oral suspension. Full article