Search Results (37)

In the field of medicinal chemistry, the introduction of silylated groups is an important strategy to alter the activity, selectivity, and pharmacokinetics of compounds based on the diverse traits of silicon, including atomic size, electronegativity, and hydrophobicity. The hydroxy group on C-9 or C-9 and C-10 of hydroxystearic acids have been functionalized as t-butyl dimethyl silyl ether. The target compounds have been fully characterized and tested for in vitro cytotoxicity in tumor cells HT29, HCT116, CaCo2, HeLa, MCF7, U2OS, and Jurkat J6 and normal I407 cells. In particular, the silyl derivative of (R)-9-hydroxystearic acid was more active in colon cancer cells. Analyses of cell proliferation, oxidative cell status, histones post-translational modifications, protein phosphorylation, gene expression, and DNA damage were performed to obtain information on the antitumor properties of the new molecules in comparison with the unmodified (R)-9-hydroxystearic acid’s previously studied effects. Our results suggest that the incorporation of a silyl functionality may be a useful tool for the structural development of new pharmaceutically active compounds against colon cancer. Full article

Reported herein is the development of assays for the spectrophotometric quantification of biocatalytic silicon−oxygen bond hydrolysis. Central to these assays are a series of chromogenic substrates that release highly absorbing phenoxy anions upon cleavage of the sessile bond. These substrates were tested with silicatein, an enzyme from a marine sponge that is known to catalyse the hydrolysis and condensation of silyl ethers. It was found that, of the substrates tested, tert-butyldimethyl(2-methyl-4-nitrophenoxy)silane provided the best assay performance, as evidenced by the highest ratio of enzyme catalysed reaction rate compared with the background (uncatalysed) reaction. These substrates were also found to be suitable for detailed enzyme kinetics measurements, as demonstrated by their use to determine the Michaelis−Menten kinetic parameters for silicatein. Full article

Polymer research is currently focused on sustainable and degradable polymers which are cheap, easy to synthesize, and environmentally friendly. Silicon-based polymers are thermally stable and can be utilized in various applications, such as columns and coatings. Poly(silyl ether)s (PSEs) are an interesting class of silicon-based polymers that are easily hydrolyzed in either acidic or basic conditions due to the presence of the silyl ether Si-O-C bond. Synthetically, these polymers can be formed in several different ways, and the most effective and environmentally friendly synthesis is dehydrogenative cross coupling, where the byproduct is H₂ gas. These polymers have a lot of promise in the polymeric materials field due to their sustainability, thermal stability, hydrolytic degradability, and ease of synthesis, with nontoxic byproducts. In this review, we will summarize the synthetic approaches for the PSEs in the recent literature, followed by the properties and applications of these materials. A conclusion and perspective will be provided at the end. Full article

This contribution reports the synthesis of polyhydroxyurethane (PHU)-poly(ethylene oxide) (PEO) multiblock copolymer networks crosslinked with polysilsesquioxane (PSSQ). First, the linear PHU-PEO multiblock copolymers were synthesized via the step-growth polymerization of bis(6-membered cyclic carbonate) (B6CC) with α,ω-diamino-terminated PEOs with variable molecular weights. Thereafter, the PHU-PEO copolymers were allowed to react with 3-isocyanatopropyltriethoxysilane (IPTS) to afford the derivatives bearing triethoxysilane moieties, the hydrolysis and condensation of which afforded the PHU-PEO networks crosslinked with PSSQ. It was found that the PHU-PEO networks displayed excellent reprocessing properties in the presence of trifluoromethanesulfonate [Zn(OTf)₂]. Compared to the PHU networks crosslinked via the reaction of difunctional cyclic carbonate with multifunctional amines, the organic–inorganic PHU networks displayed the decreased reprocessing temperature. The metathesis of silyl ether bonds is responsible for the improved reprocessing behavior. By adding lithium trifluoromethanesulfonate (LiOTf), the PHU-PEO networks were further transformed into the solid polymer electrolytes. It was found that the crystallization of PEO chains in the crosslinked networks was significantly suppressed. The solid polymer electrolytes had the ionic conductivity as high as 7.64 × 10⁻⁵ S × cm⁻¹ at 300 K. More importantly, the solid polymer electrolytes were recyclable; the reprocessing did not affect the ionic conductivity. Full article

Selective dehydrogenative silylation is one of the most valuable tools for synthesizing organosilicon compounds. In this study, a regio- and stereoselective ruthenium-catalyzed dehydrogenative intermolecular silylation was firstly developed to access (E)-alkenyl silyl-ether derivatives and silyl-ether heterocycles with good functional group tolerance. Furthermore, two pathways for RuH₂(CO)(PPh₃)₃/NBE-catalyzed dehydrogenative intermolecular silylation of alcohols and alkenes as well as intermolecular silylation of naphthol derivatives were investigated with H₂SiEt₂ as the hydrosilane reagent. Full article

Sulfur-protected enantiopure P-chiral 1-phosphanorbornane silyl ethers 5a,b are obtained in high yields via the reaction of the hydroxy group of P-chiral 1-phosphanorbornane alcohol 4 with tert-butyldimethylsilyl chloride (TBDMSCl) and triphenylsilyl chloride (TPSCl). The corresponding optically pure silyl ethers 5a,b are purified via crystallization and fully structurally characterized. Desulfurization with excess Raney nickel gives access to bulky monodentate enantiopure phosphorus(III) 1-phosphanorbornane silyl ethers 6a,b which are subsequently applied as ligands in iridium-catalyzed asymmetric hydrogenation of a prochiral ketone and enamide. Better activity and selectivity were observed in the latter case. Full article

Although ethnopharmacologically renowned, wax constituents of Dianthus species were sporadically studied. A combination of GC-MS analysis, synthesis, and chemical transformations enabled the identification of 275 constituents of diethyl-ether washings of aerial parts and/or flowers of six Dianthus taxa (Dianthus carthusianorum, D. deltoides, D. giganteus subsp. banaticus, D. integer subsp. minutiflorus, D. petraeus, and D. superbus) and one Petrorhagia taxon (P. prolifera) from Serbia. Seventeen of these constituents (nonacosyl benzoate, additional 12 benzoates with anteiso-branched 1-alkanols, eicosyl tiglate, triacontane-14,16-dione, dotriacontane-14,16-dione, and tetratriacontane-16,18-dione) and two additional synthesized eicosyl esters (angelate and senecioate) represent completely new compounds. The structures of the tentatively identified β-ketones were confirmed by analysis of the mass fragmentation of the corresponding pyrazoles and silyl enol ethers obtained by transformations of crude extracts and extract fractions. Silylation allowed the identification of 114 additional constituents, including a completely new natural product (30-methylhentriacontan-1-ol). The results obtained by multivariate statistical analyses showed that the chemical profile of Dianthus taxa’s surface waxes is subject to both genetic and ecological factors, whereas the latter seemingly takes a more important role for the studied Dianthus samples. Full article

The synthesis of methyl 3,3-bis[4-(dimethylamino)phenyl]-2,2-dimethylpropanoate is achieved by means of the alkylation of methyl isobutyrate silyl enol ether with bis[4-(dimethylamino)phenyl]methanol, facilitated by using 1,1,1,3,3,3-hexafluoroisopropanol (HFIP) as a solvent and reaction promoter. The reaction proceeds smoothly to produce the mentioned compound in a good yield via a metal and additive-free procedure. The corresponding ester is fully characterized. Full article

Condensation reactions of chlorosilanes (SiCl₄ and CH₃SiCl₃) and bis(trimethylsilyl)ethers of rigid, quasi-linear diols (CH₃)₃SiO–AR–OSi(CH₃)₃ (AR = 4,4′-biphenylene (1) and 2,6-naphthylene (2)), with release of (CH₃)₃SiCl as a volatile byproduct, afforded novel hybrid materials that feature Si–O–C bridges. The precursors 1 and 2 were characterized using FTIR and multinuclear (¹H, ¹³C, ²⁹Si) NMR spectroscopy as well as single-crystal X-ray diffraction analysis in case of 2. Pyridine-catalyzed and non-catalyzed transformations were performed in THF at room temperature and at 60 °C. In most cases, soluble oligomers were obtained. The progress of these transsilylations was monitored in solution with ²⁹Si NMR spectroscopy. Pyridine-catalyzed reactions with CH₃SiCl₃ proceeded until complete substitution of all chlorine atoms; however, no gelation or precipitation was found. In case of pyridine-catalyzed reactions of 1 and 2 with SiCl₄, a Sol–Gel transition was observed. Ageing and syneresis yielded xerogels 1A and 2A, which exhibited large linear shrinkage of 57–59% and consequently low BET surface area of 10 m²⋅g⁻¹. The xerogels were analyzed using powder-XRD, solid state ²⁹Si NMR and FTIR spectroscopy, SEM/EDX, elemental analysis, and thermal gravimetric analysis. The SiCl₄-derived amorphous xerogels consist of hydrolytically sensitive three-dimensional networks of SiO₄-units linked by the arylene groups. The non-hydrolytic approach to hybrid materials may be applied to other silylated precursors, if the reactivity of the corresponding chlorine compound is sufficient. Full article

The bioactive natural substance, hamamelitannin, was effectively synthesized in two ways. The chemical acylation of 2,3-O-isopropylidene-α,β-D-hamamelofuranose promoted by Bu₂SnO using 3,4,5-tri-O-acetylgalloyl chloride, followed by the deprotection provided hamamelitannin in 79%. Pilot enzymatic benzoylation of D-hamamelose using vinyl benzoate (4 equiv.) and Lipozyme TL IM as a biocatalyst in t-butyl methyl ether (t-BuMeO) gave mainly benzoylated furanoses (89%), of which tribenzoates reached (52%). Enzymatic galloylation of 2,3-O-isopropylidene-α,β-D-hamamelofuranose with vinyl gallate under the catalysis of Lipozyme TL IM in t-butyl alcohol (t-BuOH) or t-BuMeO provided only the 5-O-galloylated product. The reaction in t-BuMeO proceeded in a shorter reaction time (61 h) and higher yield (82%). The more hydrophobic vinyl 3,4,5-tri-O-acetylgallate in the same reactions gave large amounts of acetylated products. Vinyl gallate and triacetylgallate in the enzymatic acylation of D-hamamelose with Lipozyme TL IM in t-BuMeO yielded 2′,5-diacylated hamamelofuranoses in a yield below 20%. The use of other vinyl gallates hydrophobized by methylation or benzylation provided 2′,5-diacylated hamamelofuranoses in good yields (65–84%). The reaction with silylated vinyl gallate did not proceed. The best results were obtained with vinyl 2,3,5-tri-O-benzyl gallate, and the only product, 2′,5-diacylated hamamelofuranoside precipitated from the reaction mixture (84% in 96 h). After debenzylation, hamamelitannin was obtained an 82% yield from hamamelose in two steps. This synthesis is preparatively undemanding and opens the way to multigram preparations of bioactive hamamelitannin and its analogues. Full article

In 1971, chemists from Hoffmann-La Roche and Schering AG independently discovered a new asymmetric intramolecular aldol reaction catalyzed by the natural amino acid proline, a transformation now known as the Hajos–Parrish–Eder–Sauer–Wiechert reaction. These remarkable results remained forgotten until List and Barbas reported in 2000 that L-proline was also able to catalyze intermolecular aldol reactions with non-negligible enantioselectivities. In the same year, MacMillan reported on asymmetric Diels–Alder cycloadditions which were efficiently catalyzed by imidazolidinones deriving from natural amino acids. These two seminal reports marked the birth of modern asymmetric organocatalysis. A further important breakthrough in this field happened in 2005, when Jørgensen and Hayashi independently proposed the use of diarylprolinol silyl ethers for the asymmetric functionalization of aldehydes. During the last 20 years, asymmetric organocatalysis has emerged as a very powerful tool for the facile construction of complex molecular architectures. Along the way, a deeper knowledge of organocatalytic reaction mechanisms has been acquired, allowing for the fine-tuning of the structures of privileged catalysts or proposing completely new molecular entities that are able to efficiently catalyze these transformations. This review highlights the most recent advances in the asymmetric synthesis of organocatalysts deriving from or related to proline, starting from 2008. Full article

Stera-3β,5α,6β-triols make useful tracers of the autoxidation of Δ⁵-sterols. These compounds are generally analyzed using gas chromatography–mass spectrometry (GC-MS) after silylation. Unfortunately, the 5α hydroxyl groups of these compounds, which are not derivatized by conventional silylation reagents, substantially alter the chromatographic properties of these derivatives, thus ruling out firm quantification of trace amounts. In this work, we developed a derivatization method (trifluoroacetylation) that enables derivatization of the three hydroxyl groups of 3β,5α,6β-steratriols. The derivatives thus formed present several advantages over silyl ethers: (i) better stability, (ii) shorter retention times, (iii) better chromatographic properties and (iv) mass spectra featuring specific ions or transitions that enable very low limits of detection in selected ion monitoring (SIM) and multiple reaction monitoring (MRM) modes. This method, validated with cholesta-3β,5α,6β-triol, was applied to several environmental samples (desert dusts, marine sediments and particulate matter) and was able to quantify trace amounts of 3β,5α,6β-steratriols corresponding to several sterols: not only classical monounsaturated sterols (e.g., cholesterol, campesterol and sitosterol) but also, and for the first time, di-unsaturated sterols (e.g., stigmasterol, dehydrocholesterol and brassicasterol). Full article

An inexpensive and highly efficient metal-free alternative to commonly used Ru- and Ir-based catalysts was proposed. It was shown that the new 2,7-di-tert-butyl-5,10-bis(4-trifluoromethylphenyl)-5,10-dihydrophenazine outcompeted the iridium phenylpyridyl complex in photoredox activity in the alkylation of silyl enol ethers yielding aryl alkyl ketones. The reaction occurred under visible light irradiation at room temperature and was also applicable to drug derivatives (ibuprofen and naproxen). In-depth photophysical, electrochemical, and quantum chemical studies showed that the aforementioned N,N-diaryldihydrophenazine exhibited enhanced properties that were essential for the photoredox catalysis (a long-lived triplet excited state, strong reducing ability, high stability of the radical cations formed in single-electron-transfer event, and chemical inertness of the catalyst with respect to reactants). Importantly, the substituted N,N′-diaryldihydrophenazines could be obtained directly from diaryl amines; a facile, easily handled and scaled-up one-pot synthetic procedure was elaborated. Full article

A single clean, good-yielding, environment-friendly microwave-assisted procedure for O-silylation of uridine with tert-butyldimethylsilyl chloride (TBDMSCl), 1,8-Diazabicyclo(5.4.0)undec-7-ene (DBU) and potassium nitrate as catalyst under solvent-free conditions is reported. Subsequent silyl ether deprotection is accomplished with a reusable acidic resin via microwave irradiation. Both the silylation and desilylation protocols have been applied to a panel of alcohols of pharmaceutical interest. Full article

An improved protocol for the transformation of ribonucleosides into 2′,3′-dideoxynucleoside and 2′,3′-didehydro-2′,3′-dideoxynucleoside derivatives, including the anti-HIV drugs stavudine (d4T), zalcitabine (ddC) and didanosine (ddI), was established. The process involves radical deoxygenation of xanthate using environmentally friendly and low-cost reagents. Bromoethane or 3-bromopropanenitrile was the alkylating agent of choice to prepare the ribonucleoside 2′,3′-bisxanthates. In the subsequent radical deoxygenation reaction, tris(trimethylsilyl)silane and 1,1′-azobis(cyclohexanecarbonitrile) were used to replace hazardous Bu₃SnH and AIBN, respectively. In addition, TBAF was substituted for camphorsulfonic acid in the deprotection step of the 5′-O-silyl ether group, and an enzyme (adenosine deaminase) was used to transform 2′,3′-dideoxyadenosine into 2′,3′-dideoxyinosine (ddI) in excellent yield. Full article